Ecomatik
Filter
Showing all 2 results
| Brand | Ecomatik |
|---|---|
| Origin | Germany |
| Model | DF1 / DF2 / DF3 |
| Measurement Principle | High-Resolution Linear Displacement Transduction via Spring-Loaded Contact Probe |
| Sensor Range | 15 mm (DF1), 25.4 mm (DF2), 50.8 mm (DF3) |
| Full-Scale Diameter Monitoring Range | 0–110 mm (expandable) |
| Accuracy | ±2 µm (DF1), ±3.3 µm (DF2), ±6.6 µm (with CR1000 Logger) |
| Resolution | 0.04% of reading + 6–20 µm (logger-dependent) |
| Temperature Coefficient | <0.2 µm/°C |
| Operating Temperature | −25 to +70 °C |
| Relative Humidity | 0–100% RH |
| Weight | 15 g (DF1), 26 g (DF2), 37 g (DF3) |
| Power | Internal battery, >2 years continuous logging (with DL10 datalogger) |
| Data Storage | Up to 1,900,000 records (4 sensors, 1-min interval, 1-year capacity) |
| Interface | Analog voltage output (0–2.5 V or 0–5 V), compatible with Campbell Scientific CR1000/CR6, Delta-T Devices GP2, DataTaker DT80/DT85, and other standard analog-input loggers |
| IP Rating | IP67 (fully weatherproof) |
| Brand | Ecomatik |
|---|---|
| Origin | Germany |
| Model | SF-G |
| Measurement Principle | Granier Thermal Dissipation Method |
| Probe Configuration | Dual-needle, Constant Current Heating |
| Output Signal | 0–1000 µV differential voltage |
| Power Consumption | 0.2 W ±5% (84 mA @ 12 VDC) |
| Operating Temperature | –25 to +50 °C |
| Cable Length | Standard 5 m (extendable to 20 m) |
| Suitable Stem Diameter | >5 cm |
| Probe Variants | SF-G33 (33 mm needle / 20 mm heater), SF-G43 (43 mm / 20 mm), SF-G63 (63 mm / 20 mm) |
| Compliance | Compatible with ISO 17025-accredited data acquisition systems and GLP/GMP environmental monitoring workflows |