EYELA (Tokyo Rikakikai Co., Ltd.)
Filter
Showing all 27 results
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CA |
| Cooling Capacity | 1200 W (1030 kcal/h) at 10°C bath temperature |
| Temperature Range | −20 to +30°C |
| Temperature Stability | ±2°C |
| Circulation Flow Rate | 16 L/min (max), 27 L/min (external pump option) |
| Max Head | 9.5 m |
| Reservoir Volume | 14 L (16.5 L total) |
| Refrigerant | R407C |
| Compressor Power | 675 W (air-cooled) |
| Reservoir Material | SUS304 stainless steel |
| Cooling Coil Material | Nickel-plated copper |
| External Port Fitting | 11 mm OD tubing |
| Dimensions (W×D×H) | 340 × 384 × 851 mm |
| Weight | 41 kg |
| Control Interface | Touch-key input with LCD display (0.1°C resolution) |
| Safety Features | Leakage/overcurrent protection, high-pressure switch, overload relay, compressor protection timer, 2 A fuse for peripheral sockets, self-diagnostic thermostat, circulation pump thermal protector |
| I/O Ports | Recorder output, alarm output |
| Certifications | Complies with JIS B 8603, CE-marked per EN 61000-6-3 & EN 61000-6-2 |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CA-1310 |
| Cooling Capacity | 1200 W (1030 kcal/h) at 10°C liquid temperature |
| Temperature Range | −20 to +20°C |
| Temperature Stability | ±2°C |
| External Flow Rate | Up to 16 L/min |
| Max. Head | 9.5 m |
| Reservoir Volume | 13 L (usable liquid volume: 10.5 L) |
| Refrigerant | R407C |
| Compressor Control | ON-OFF |
| Display Resolution | 0.1°C |
| Power Supply | Air-cooled, 675 W |
| Tank Material | SUS304 stainless steel |
| Dimensions (W×D×H) | 460 × 430 × 570 mm |
| Weight | ~44 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CA-1320 |
| Cooling Capacity | 1050 W (903 kcal/h) at 10°C liquid temperature |
| Temperature Range | −20 to +20°C |
| Temperature Stability | ±2°C |
| Circulation Flow Rate | Up to 16 L/min |
| Max. Head | 9.5 m |
| Reservoir Volume | 13 L (usable liquid volume: 10.5 L) |
| Refrigerant | R407C |
| Compressor Control | ON-OFF |
| Display Resolution | 0.1°C |
| Reservoir Material | SUS304 stainless steel |
| Dimensions (W×D×H) | 460 × 430 × 570 mm |
| Weight | ~48 kg |
| Cooling Method | Air-cooled |
| Power Consumption | 675 W |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CCA |
| Cooling Capacity | 450 W (387 kcal/h) at 10°C liquid temperature |
| Temperature Range | –20°C to +20°C |
| Temperature Stability | ±2°C |
| Circulation Flow Rate | Up to 9 L/min (external pump: up to 14 L/min) |
| Max Head | 4.2 m |
| Reservoir Volume | ~4 L |
| Reservoir Material | SUS304 stainless steel |
| Cooling Circuit | Closed-loop |
| Refrigerant | R407C |
| Compressor Type | Air-cooled, 350 W output |
| Temperature Control | ON-OFF refrigeration control |
| Display & Input | Touch-key LCD, 0.1°C resolution |
| Safety Features | Leakage/overcurrent protection, compressor overload protection, self-diagnostic system (compressor fault, power failure alarm, sensor error), circulation pump thermal protection |
| I/O Ports | Recorder output, alarm output |
| Cooling Coil Material | Nickel-plated copper |
| Inlet/Outlet Fitting | 11 mm OD compatible |
| Dimensions (W×D×H) | 232 × 497 × 490 mm |
| Weight | ~29 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CCR-1000G |
| Reactor Type | Flow-through Catalytic Hydrogenation System |
| Max Operating Pressure | 0.4 MPa |
| Temperature Range | Ambient +15°C to 200°C (Aluminum Block Heating Block) |
| Liquid Flow Rate | Up to 0.9 mL/min |
| Gas Flow Rate | Up to 100 mL/min (H₂) |
| Catalyst Cartridge | Stainless Steel Column (Ø5 × 50 mm, replaceable) |
| Wetted Materials | PP (reaction reservoir), Fluoropolymer (fluidic pathways), Perfluoroelastomer (O-rings), SUS316 (glass support components) |
| Power Supply | AC 100 V, 50/60 Hz, 2.5 A, 250 VA |
| Dimensions (W×D×H) | 356 × 461 × 389 mm |
| Safety Features | Pressure-sensor-triggered emergency shutdown, independent overtemperature protection for heating block, heater overload protection, leakage and overcurrent protection, self-diagnostic system, communication failure detection |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CCX |
| Temperature Control Range (CCX-1000/1010) | RT + 10°C to 160°C (with external chiller) |
| Temperature Control Range (CCX-1200/1210) | −78°C to RT (using dry ice/acetone or cryogenic circulator) |
| Number of Reaction Vessels | 1–12 |
| Reaction Volume per Vessel | 3–15 mL (max. 25 mL) |
| Stirring Method | High-torque magnetic stirring |
| Stirring Speed | 100–1200 rpm (in water) |
| Temperature Setting & Display | Digital PID controller with membrane keypad input and LED display (CCX-1000/1010) |
| Stirring Speed Control | Rotary knob |
| Reflux Capability | Integrated high-efficiency reflux condenser (CCX-1000/1010) |
| Gas Purging | Vacuum-assisted inert gas (N₂/Ar) exchange via septum-sealed ports |
| Vessel Compatibility | Standard Φ24 × 150 mm glass tubes (straight-mouth and flanged types), PTFE caps, nitrile rubber seals |
| Wetted Materials | Borosilicate glass, PTFE, nitrile rubber |
| External Dimensions (stand only) | 245 W × 275 D × 800 H mm |
| Weight | ~8 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | CCX-3200 |
| Reaction Vessel Capacity | 0.5–60 mL |
| Number of Reaction Positions | 1–8 (up to 32 with optional adapter kits) |
| Temperature Range | Ambient +10°C to 280°C (max 200°C at 50–60 mL load) |
| Stirring Speed | ~100–1200 rpm (in water) |
| Stirring Type | High-strength magnetic coupling |
| Temperature Control | Digital keypad setting & LED display |
| Stirring Control | Analog knob adjustment |
| Reflux Capability | Optional water-cooled split-head condenser |
| Reagent Addition | Via pipettes, droppers, or calibrated dispensers |
| Wetted Materials | DURAN® borosilicate glass |
| Tube Diameter Compatibility | Φ12–34 mm (12 standard sizes), max height 50 mm |
| External Dimensions (W×D×H) | 245 × 275 × 800 mm (stand only) |
| Weight | ~8 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | DDL-1000 / DDL-2000 |
| Reactor Type | Jacketed Laboratory Reactor System |
| Temperature Control Modes | Reaction Mass Control, Jacket Control, Isothermal Mode, Gradient Ramp Mode |
| Stirring | Mechanical Agitation (PTFE or SUS304 Impeller) |
| Temp. Range | 10–80 °C (Jacket) |
| Temp. Stability | ±0.1 °C |
| Stirring Speed | 10–1059 rpm |
| Max. Torque | 19.6 N·m (DDL-1000), 0.49 N·m (DDL-2000) |
| Cooling Rate (Jacket) | up to 30 K/min |
| Heating Rate (Jacket) | up to 7.0 K/min |
| Safety Systems | Independent Over-Temperature Protection, Leakage Current Breaker, Low-Coolant-Level Alarm, Emergency Rapid-Cooling Function, SSR Failure Detection, Dual Temperature Limit Alarms |
| Power Supply | AC 100 V, 50/60 Hz (7 A / 700 VA for DDL-1000 |
| Dimensions & Weight | 290×380×790 mm, 20 kg (DDL-1000) |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | DDS |
| Reactor Capacity | 4 × (50 / 100 / 250 mL, independent) |
| Temperature Control Range | −50 to 250 °C (requires external chiller) |
| Temperature Accuracy | ±0.5 K (−20–100 °C, aluminum block), ±1 K (100–180 °C, aluminum block) |
| Stirring Speed | 125–1000 rpm |
| Max. Heating Rate | Tr < 5.3 K/min, Tj < 19.3 K/min (250 mL water in glass reactor) |
| Max. Cooling Rate | Tr < 7.2 K/min, Tj < 29.6 K/min (250 mL water) |
| Max. Heat Removal Capacity | 0.74–1.1 W/g (200 mL water) |
| Heat Flow Measurement Resolution | 0.1 W, ±5% error (standard conditions) |
| Control Modes | Reactor temperature, aluminum block temperature, gradient, isothermal |
| Control Method | PID heating/cooling + cascade control |
| Liquid Addition | 8-channel volumetric dosing |
| Agitation Type | Propeller stirring |
| Optional pH Control | 0–14, acid/base titration |
| Heat Measurement Principle | Thermal conductivity-based calorimetry with calibration |
| Data Visualization | Real-time & historical trend graphs |
| Safety Systems | Leakage current protection, independent overtemperature cutoff, motor overload protection, software self-diagnosis |
| Flask Ports | Rodaviss 24, NS 14/23 (×3), GL 14 (×1) |
| Vessels | Borosilicate glass, round-bottom, graduated (50 mL or 250 mL) |
| Wetted Materials | Glass, PTFE, PPS, Karlez®, SUS316 |
| Dimensions (W×D×H) | 650 × 490 × 380 mm |
| Weight | ~59 kg |
| Power Supply | AC 100 V, 50 Hz, 2000 VA, 20 A |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | FDU-2110 |
| Cold Trap Temperature | −80 °C |
| Condensation Capacity | 3 L per 24 h |
| Vacuum Range | 0.4–533 Pa (Pirani gauge, digital display) |
| Cold Trap Dimensions | Φ200 × 300 mm (SUS304 stainless steel) |
| Refrigeration System | 500 W dual-stage compressor, R404A/R23 refrigerant blend |
| Defrost Method | Hot-gas auto-defrost with thermal cutoff |
| Vacuum Release | Motorized solenoid valve with 0.2 µm sterile air filter |
| Power Supply | Vacuum pump circuit — max. 6 A |
| Overall Dimensions & Weight | 700 × 550 × 935 mm (W×D×H), approx. 140 kg |
| Safety Features | Leakage/overcurrent protection, compressor protection circuit, control panel self-diagnosis, fuse for service outlet |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | MF/F |
| Drive Type | DC brushless motor with 6-point rotor coupling |
| Heating Method | Steam or recirculating water bath |
| Vacuum Operation Range | Down to 1.33 Pa (10 mTorr) |
| Evaporation Area | 0.04–0.25 m² (glass or SUS316L evaporator sleeves) |
| Condenser Surface Area | 0.3–3.0 m² (multi-layer coiled or triple-coil design) |
| Collection Flask Capacity | 1–20 L (evaporate + concentrate) |
| Max. Feed Viscosity | 1.0–1.5 Pa·s (1000–1500 cP) |
| Rotational Speed Range | 140–1800 rpm (infinitely variable, 50/60 Hz) |
| Evaporation Rate | Up to 40 L/h (steam-heated, F-200 model) |
| Sealing System | Magnetic drive shaft (F-70/F-150), mechanical seal (F-200), vacuum-rated elastomer gasket (MF-10A) |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | MGS |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Accuracy | ±0.1–0.2°C |
| Control System | Microcomputer-based P.I.D. temperature control |
| Display Resolution | 0.1°C (digital LED) |
| Heating Block | Single aluminum block (90W × 125D × 70H mm), SUS304 stainless steel sample tubes (1.6 mm ID × 180 mm length) |
| Gas Filtration | Integrated 0.2 µm hydrophobic filter |
| Gas Flow Regulation | Adjustable needle valve (9 mm OD inlet connection) |
| Safety Features | Dual-limit temperature alarm, power failure detection, heater runaway protection, independent over-temperature cutoff, Pt100Ω sensor monitoring, fuse protection |
| Programmability | Two-stage program control, auto-start/stop, auto-tuning, temperature display calibration |
| Operating Ambient | 5–35°C |
| Dimensions & Weight | 240W × 310D × 600H mm, 7.5 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | MMS-110 / MMS-210 / MMS-310 / MMS-3010 |
| Oscillation Mode | Reciprocal (MMS-110), Orbital (MMS-210), Dual-Mode Reciprocal/Orbital (MMS-310 & MMS-3010) |
| Speed Range | 20–250 rpm |
| Amplitude | 25 mm |
| Speed Control & Display | Analog Knob + Digital LED Display |
| Safety Features | Fuse Protection + Motor Overload Circuit |
| Time Accumulation Function | 0.1–999.9 h (digital display) |
| Motor Type | Brushless DC Motor |
| Operating Ambient Temperature Range | 4–50 °C |
| Noise Reduction | ≥5 dB(A) vs. previous generation |
| Enclosure Compatibility | Compatible with EYELA FMS/FMC environmental chambers |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | MMV-1000W |
| Oscillation Mode | Vertical or Tilted |
| Tilt Angle Adjustment | 0–20° |
| Oscillation Speed Range | 20–300 cycles/min (vertical), 20–250 cycles/min (tilted) |
| Amplitude | 40 mm |
| Max Load Capacity | ~7 kg × 2 (including clamps) |
| Flask Compatibility | Standard Clamp: 50–1000 mL |
| Large Clamp | 50–3000 mL |
| Noise Level | ≤55 dB(A) |
| Drive System | Brushless DC Motor |
| Control Interface | Digital Display with Memory Function (retains last set frequency) |
| Operation Modes | Timed or Continuous |
| Acceleration/Deceleration Profile | Soft-start and soft-stop ramping |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1200AV / N-1200AVF-W / N-1200AVF-WD |
| Rotational Speed | 5–280 rpm |
| Max. Evaporation Rate | 25 mL/min |
| Ultimate Vacuum | < 399.9 Pa (≤ 3 mmHg) |
| Water Bath Temp. Range | RT + 5°C to 90°C |
| Oil/Water Dual Bath Temp. Range | RT + 5°C to 180°C |
| Temp. Control Accuracy | ±1.5°C (water) / ±3°C (oil) |
| Temperature Control Method | Microcomputer-based ON-OFF control |
| Heating Power | 1.05 kW |
| Condenser Type | Vertical double-coil |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (up to 3 L compatible) |
| Bath Dimensions & Volume | Ø240 × 120 mm (shallow zone Ø160 mm), ~5.4 L |
| Lift Stroke | 100 mm (manual rack) + 130 mm (handle extension) |
| Overall Dimensions & Weight | 595 W × 445 D × 700 H mm, 16.5 kg |
| Safety Features | Thermal fuse, dry-run prevention sensor |
| Sealing Material | PTFE vacuum seal |
| Condenser & Flask Joints | Standard taper 29/38 (flask), S35/20 (receiving flask) |
| Shaft | Short-type glass rotary shaft, ID 18 mm × L 178 mm |
| Quick-Connect Fitting | Integrated push-fit interface for chiller hose coupling |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-2100 |
| Bath Temperature Range | Room Temp +5 to 90°C |
| Bath Temp Control Accuracy | ±1°C |
| Rotation Speed | 5–160 rpm |
| Max Evaporation Rate | 43 mL/min (F-type), 23 mL/min (U/R-type) |
| Ultimate Vacuum | 399.9 Pa |
| Condenser Surface Area | 0.25 m² |
| Lift Stroke | 160 mm |
| Bath Dimensions & Capacity | Ø280 × 144 mm, ~8.5 L |
| Flask Capacity | 5 L (round-bottom), 3 L (receiving flask) |
| Joint Standard | S35/20 spherical ground glass |
| Weight | ~29 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PPS-1511 / PPS-2511 / PPS-3511 |
| Reaction Vessels | 1–5 units (independently controlled) |
| Synthesis Volume | 1–4 mL (PPS-1511), 10–30 mL (PPS-2511), 50–60 mL (PPS-3511) |
| Temperature Range | −23 to 160 °C (PPS-1511), −27 to 160 °C (PPS-2511), −28 to 130 °C (PPS-3511) — each zone independently adjustable |
| Temp. Control Accuracy | ±0.5 °C |
| Stirring Speed | 100–1600 rpm (4 mL water, PPS-1511), 100–1300 rpm (30 mL water, PPS-2511), 100–1100 rpm (60 mL water, PPS-3511) |
| Stirring Input | Rotary knob with digital RPM display (20–2000 rpm) |
| Temp. Input & Display | Membrane keypad with digital display (−40.0 to 160.0 °C) |
| Gas Handling | Vacuum evacuation and inert gas purging (requires optional sealed reaction vessels) |
| Reflux Capability | Integrated high-efficiency reflux condenser |
| Reagent Addition | Syringe, pipette, or standard-taper dropping funnel — all under inert atmosphere |
| Visual Monitoring | Front-access observation slot with integrated LED illumination |
| Safety Systems | Leakage current breaker, thermal fuse, self-diagnostic firmware (including sensor fault detection and user-configurable upper temperature limit), dual-layer protective housing, drip tray, aluminum block presence detection, motor overheat protection |
| Vessel Dimensions (mm) | Φ15×150H (flanged, PPS-1511), Φ30×200H (flanged, PPS-2511), Φ35×200H (flanged, PPS-3511) |
| Stir Bar Sizes (mm) | Φ10×5H (cross-type), Φ20×7H (cross-type), Φ25×8H (cross-type) |
| External Dimensions (W×D×H, mm) / Weight | 465×335×390 / 25 kg (PPS-1511), 465×335×440 / 27 kg (PPS-2511), 465×335×450 / 28 kg (PPS-3511) |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PPS-1520 / PPS-2520 / PPS-3520 / PPS-6520 |
| Tube Capacity | 1–5 (up to 20 with optional configuration) |
| Reaction Volume Range | 0.5–60 mL |
| Temperature Control Range | −28 °C to +160 °C (5-zone independent control) |
| Temperature Programming | 7-step ramp/hold profiles |
| Stirring | High-torque magnetic stirring (optional independent stirrer per position) |
| Dosing Control | External programmable peristaltic pump interface (dose volume, rate, temp-triggered start/stop, gradient coupling) |
| Display & Interface | LCD touchscreen |
| Data Logging | Real-time USB-exportable CSV/Excel-compatible records (time-stamped temperature, stirring status, dosing events) |
| Safety Enclosure | Dual-layer acrylic shield with anti-condensation design |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PPS-5511 |
| Temperature Control Range | −23 to 160 °C (independent per module) |
| Temp. Accuracy | ±0.5 °C |
| Stirring Speed | 100–2000 rpm (load-dependent) |
| Reaction Volume per Vessel | 0.5–60 mL |
| Number of Simultaneous Reaction Vessels | 1–5 (expandable to 20 with optional tube rack configuration) |
| Tube Diameter Compatibility | Φ12–Φ35 mm (14 standard sizes) |
| Gas Handling | Vacuum evacuation & inert gas (N₂/Ar) purging capability (requires compatible sealed vessels) |
| Safety Systems | Dual-layer acrylic shield, motor overheat protection, leakage/overcurrent breaker, thermal fuse, real-time sensor diagnostics, user-configurable upper/lower temperature limits |
| External Dimensions | 465 W × 335 D × 390 H mm (main unit) |
| Weight | ~23 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PPV-3430 / PPV-3460 / PPV-3461 |
| Reaction Vessel Capacity | PPV-3430: 10–30 mL (forked test tubes, 1–4 units) |
| PPV-3460 | 50–150 mL (3-neck reaction vessels, 1–4 units) |
| PPV-3461 | 50–150 mL (4-neck reaction vessels, 1–4 units) |
| Temperature Control Range | −27 to 200 °C (low-temperature operation requires external chiller) |
| Temperature Accuracy | ±0.5 °C |
| Stirring Method | High-torque magnetic stirring |
| Rotation Speed | 50–900 rpm (tested with 30 mL water for PPV-3430 |
| Temperature Setting & Display | Membrane keypad input with digital LED display |
| Stirring Speed Setting & Display | Analog knob with digital LED display |
| Reflux Configuration | Dual-path reflux condenser with independent coolant分流 (coolant distribution manifold) |
| Reagent Addition | Compatible with syringes, dropping funnels, and calibrated pipettes under inert or vacuum conditions |
| Reaction Observation | Front-mounted aluminum observation window with integrated LED illumination |
| Safety Systems | Leakage current circuit breaker, thermal fuse, temperature controller self-diagnostic function (programmable upper-limit temperature, sensor fault detection), dual-layer protective housing, drip collection tray, motor overheat protection |
| External Dimensions & Weight | 475 W × 383 D × 290 H mm |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | PSL-1810 |
| Temperature Range | −80 °C to 0 °C |
| Temperature Stability | ±1 °C |
| Stirring Speed | 100–800 rpm |
| Heating Power | 450 W |
| Cooling System | Dual-compressor, air-cooled |
| Refrigerants | R507A (primary stage), R23 (secondary stage) |
| Bath Capacity | 3.5 L |
| Bath Chamber Dimensions | Φ180 × 140 H mm (SUS304 stainless steel) |
| Max. Vessel Size | Φ95 mm × 300 mL |
| External Dimensions | 530 W × 450 D × 520 H mm |
| Weight | ~70 kg |
| Control Method | PID temperature control |
| Display & Setting | Digital LED display with manual keypad input |
| Safety Functions | Leakage current protection, overcurrent cutoff, heater over-power prevention, compressor high-pressure cutoff, relay overload protection, self-diagnostic system (heater fault, sensor failure, high/low temperature alarm), compressor time-delay startup |
| Auxiliary Function | Auto power-on/off scheduling |
| Stirrer Output | 25 W |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | SD-1000 |
| Inlet Temperature Range | 40–200 °C |
| Temperature Control Accuracy | ±1 °C |
| Max. Evaporation Rate | 1500 mL/h |
| Drying Air Flow | 0.2–0.75 m³/min |
| Atomizing Air Pressure | 20–245 kPa |
| Feed Pump Flow Rate | 150–1700 mL/h |
| Stirrer Speed | 100–1000 rpm |
| Sample Vessel Capacity | 50 mL–2 L |
| Heater Power | 3 kW |
| Nozzle Type | Twin-fluid nozzle (standard orifice ID: 0.4 mm) |
| Construction | Borosilicate glass evaporation chamber & cyclonic separator |
| Powder Collection Vessel | 600 mL borosilicate glass |
| Safety Features | Real-time diagnostics for inlet/outlet temperature deviation, airflow anomaly, heater fault, and feed pressure failure |
| Auto-cleaning Interval | Programmable 1–20 min cycles |
| Analog Output | 0–10 mV (inlet temp, outlet temp, air flow) |
| Dimensions (W×D×H) | 700 × 620 × 1500 mm |
| Weight | ~110 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | SS-1000 |
| Oscillation Mode | Reciprocating (Electromagnetic Induction) |
| Speed Range | 0–200 rpm |
| Stroke Amplitude | 25 mm |
| Operating Ambient Temperature | 5–35 °C |
| External Dimensions (W×D×H) | 200 × 469 × 135 mm |
| Weight | Approx. 6.6 kg |
| Power Supply | AC 100 V, 50/60 Hz |
| Current Draw | 0.4 A |
| Input Power | 40 VA |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | TVE-1100A / TVE-1100B |
| Concentration Principle | Vortex-assisted vacuum evaporation |
| Temperature Range | Ambient +5°C to 60°C (TVE-1100A), Ambient +5°C to 40°C (TVE-1100B) |
| Temperature Accuracy | ±0.2°C |
| Oscillation Speed | 100–1100 rpm (50/60 Hz) |
| Oscillation Amplitude | 3 mm |
| Gas Line Materials | PTFE, Polypropylene (PP), Viton®, Silicone Rubber, Borosilicate Glass |
| Vacuum & Vent Port OD | 10 mm |
| Drain Tube OD | 12 mm |
| Compatible Vessels | Centrifuge tubes (29 mm OD × 110 mm), Standard test tubes (Φ12–Φ18 mm × 100–180 mm), Straight-, flip-, screw-, and standard ground-glass joint formats |
| Operating Ambient | 5–35°C |
| Dimensions (W×D×H) | 300 × 500 × 670 mm |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | UT-1000 / UT-2000 |
| Cooling Method | Direct cylinder cooling with integrated glass condenser |
| Maximum Moisture Removal Capacity | 0.5 kg H₂O (UT-1000) / 0.4 kg H₂O (UT-2000) |
| Minimum Achievable Temperature | −50 °C (UT-1000) / −100 °C (UT-2000) |
| Bath Dimensions | Ø90 × 225 mm H |
| Bath Volume | 1.4 L |
| Refrigeration System | Air-cooled, 400 W (UT-1000) / Dual air-cooled compressors, 2 × 450 W (UT-2000) |
| Refrigerants | R507A (UT-1000) / R404A + R1150 (UT-2000) |
| Vacuum Pump Power Interface | Max. 4 A (UT-1000) / Max. 2 A (UT-2000) |
| Operating Ambient Temperature Range | 5–35 °C (UT-1000) / 5–30 °C (UT-2000) |
| External Dimensions (W×D×H, mm) | 380(420) × 370 × 322 (UT-1000) / 420(460) × 510 × 475 (UT-2000) |
| Net Weight | ~27 kg (UT-1000) / ~56 kg (UT-2000) |
| Safety Features | Earth leakage protection, overcurrent cutoff, high-pressure compressor switch, compressor overload prevention |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | VTX-2000 / VTX-2500 |
| Instrument Type | Automated Quantitative Vacuum Concentrator |
| Temperature Range | +10–80°C |
| Temperature Control Accuracy | ±1°C |
| Sample Capacity | 250 mL × 6 positions |
| Rotational Speed | 20–350 rpm |
| Ultimate Vacuum | 7 hPa (5 mmHg) |
| Cooling Water & Vacuum Port ID | 10 mm |
| Dimensions (W×D×H) | 670 × 570 × 710 mm |
| Weight | 35 kg |
| Brand | EYELA (Tokyo Rikakikai Co., Ltd.) |
|---|---|
| Origin | Japan |
| Model | N-1200BV |
| Rotational Speed | 5–280 rpm |
| Max. Evaporation Rate | 25 mL/min |
| Ultimate Vacuum | ≤399.9 Pa (≤3 mmHg) |
| Water Bath Temp. Range | RT +5 to 90°C |
| Oil/Water Dual Bath Temp. Range | RT +5 to 180°C |
| Temp. Control Accuracy | ±1.5°C (water), ±3°C (oil) |
| Heating Power | 1.05 kW |
| Condenser Type | Vertical double-coil |
| Cooling Surface Area | 0.146 m² |
| Flask Capacity | Standard 1 L (max 3 L), Pear-shaped, JIS Standard Taper 29/38 |
| Collection Flask | 1 L spherical, S35/20 ground joint |
| Rotary Shaft | Short-type glass shaft, Ø18 mm × 178 mm, JIS 29/38 |
| Sealing Material | PTFE vacuum seal |
| Bath Dimensions & Volume | Ø240 mm (upper) / Ø160 mm (lower) × 120 mm depth, ~5.4 L |
| Lift Stroke | 100 mm (motorized) + 130 mm (manual extension) |
| Overall Dimensions & Weight | 595 W × 445 D × 700 H (930 mm with lift extended) mm, 17.5 kg |