FRITSCH
Filter
Showing 1–30 of 33 results
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | ANALYSETTE 18 |
| Voltage | 230 V, 1~ |
| Frequency | 50–60 Hz |
| Input Power | 480 W |
| Sieving Method | Dry Sieving |
| Sample Condition | Dry |
| Sieving Range (Dry) | 20 µm – 125 mm |
| Max. Sample Load | 6 kg |
| Sieving Time | 5–60 min |
| Dimensions (W×L×H) | 58 × 58 × 39 cm |
| Net Weight | 92 kg |
| Gross Weight | 129 kg |
| Motor Type | Two maintenance-free asymmetric motors |
| Motion Type | Simultaneous horizontal and vertical oscillation |
| Compliance | ISO 3310-1, ASTM E11-95, ISO 9000 traceable calibration |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Analysette 18 |
| Measurement Principle | Dry Mechanical Vibratory Sieving |
| Max. Sample Capacity | 15 kg (standard), up to 25 kg with optional large-diameter sieve stack |
| Sieve Aperture Range | 20 µm – 125 mm |
| Max. Sieve Diameter | 450 mm (18") |
| Sieving Time | 5–60 min |
| Drive System | Dual Asymmetric Counter-Rotating Motors |
| Compliance | ISO 2591-1, ISO 9276-1, ASTM E11, USP <786> |
| Software | AUTOSIEVE v5.x (FDA 21 CFR Part 11 compliant audit trail & user access control) |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Analysette 3 |
| Compliance | ISO 3310, ASTM E11, DIN 66165, EN 10204 3.1B |
| Measurement Range (Dry) | 32 µm – 63 mm |
| Measurement Range (Wet) | 20 µm – 10 mm |
| Measurement Range (Micro-fine) | 5 µm – 100 µm |
| Max Sieve Stack (50 mm) | 10 trays |
| Max Sieve Stack (25 mm) | 16 trays |
| Sample Capacity (Dry, <100 µm) | >100 kg |
| Sample Capacity (Dry, <25 mm) | >1 kg |
| Sample Capacity (Wet) | 20–100 g |
| Sample Capacity (Micro-fine) | 0.2–0.5 g |
| Sieving Duration (Dry) | 3–20 min |
| Sieving Duration (Wet) | 3–10 min |
| Sieving Duration (Micro-fine) | 30–60 min |
| Amplitude Display | Digital (mm) |
| Frequency Display | Digital (Hz) |
| Control Interface | RS232 |
| Software | AUTOSIEVE™ |
| IP Rating | IP65 |
| Tension Control | Electronic torque-controlled sieve clamping system |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | ANALYSETTE 3 PRO |
| Dry Sieving Range | 32 µm – 63 mm |
| Wet Sieving Range | 20 µm – 10 mm |
| Micro Sieving Range | 5 µm – 100 µm |
| Sample Capacity (Dry) | <100 g (for <100 µm), <1 kg (for <25 mm) |
| Sample Capacity (Wet) | 20–100 g |
| Sample Capacity (Micro) | 0.2–0.5 g |
| Sieving Time (Dry) | 3–20 min |
| Sieving Time (Wet) | 3–10 min |
| Sieving Time (Micro) | 30–60 min |
| Max. Stackable Sieve Trays | 10 × 50 mm trays or 16 × 25 mm trays |
| Compliance | ISO 3310-1/-2, ASTM E11, DIN 66165, EN 10204 3.1B |
| Software Interface | AUTOSIEVE (PC-connected, GLP-compliant data logging) |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Analysette 3 SPARTAN |
| Dry Method Range | 32 µm – 63 mm |
| Wet Method Range | 20 µm – 10 mm |
| Sample Capacity (Dry) | up to 2 kg |
| Sample Capacity (Wet) | 20–100 g |
| Sieving Time (Dry) | 3–20 min |
| Sieving Time (Wet) | 3–10 min |
| Max. Stackable Sieve Trays | 10 × Ø50 mm or 16 × Ø25 mm |
| Sieve Compliance | ISO 3310-1 & ASTM E11 |
| Net Weight | 21 kg |
| Gross Weight | 26 kg |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 0 |
| Power Supply | 100–240 V, 1~ , 50–60 Hz, 50 W |
| Max. Feed Size | 5 mm |
| Max. Sample Volume | 10 mL |
| Min. Sample Volume | 0.1 mL |
| Final Particle Size | 5–10 µm |
| Grinding Modes | Dry & Wet |
| Net Weight | 21 kg |
| Gross Weight | 23 kg |
| Dimensions (L×W×H) | 37 × 40 × 20 cm |
| Optional Accessory | Cryo-Grinding Adapter |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Pulverisette 0 |
| Instrument Type | Vibratory Disc Mill (not ball mill — corrected per ISO/ASTM classification) |
| Sample Compatibility | Cryogenic, wet, oily, fatty, polymeric, and heat-sensitive materials |
| Feed Size | ≤ 5 mm |
| Final Particle Size | 1–10 µm (typical median D₅₀) |
| Batch Volume | 1–10 mL |
| Power Supply | 100–240 V AC, 50–60 Hz, 50 W |
| Net Weight | 21 kg |
| Dimensions (L×W×H) | 37 × 40 × 20 cm |
| Safety Certification | TÜV-tested, CE-compliant |
| Grinding Chamber Material Options | Agate, Silicon Nitride, Alumina, Zirconia, Stainless Steel, Hardened Steel, Tungsten Carbide |
| Optional Accessories | Cryo-Box (liquid nitrogen compatible), Acoustic Enclosure, Transparent Viewing Window, Digital Timer with 0.01 s resolution |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 1 Classic |
| Max. Feed Size (Type I) | 60 mm × 60 mm |
| Max. Feed Size (Type II) | 95 mm × 95 mm |
| Throughput (Type I) | 140 kg/h |
| Throughput (Type II) | 200 kg/h |
| Final Particle Size (both types) | 1–15 mm |
| Motor Power (Type I) | 1.1 kW |
| Motor Power (Type II) | 2.2 kW |
| Weight (Type I) | 177 kg |
| Weight (Type II) | 205 kg |
| Dimensions | 40 × 80 × 80 cm |
| Minimum Jaw Gap | 1 mm |
| Adjustable Jaw Gaps | 10 preset positions |
| Grinding Chamber Materials | Stainless steel, zirconium oxide, tempered steel, chromium-free steel, manganese steel, tungsten carbide |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 1 Premium (Type I / Type II) |
| Max. Feed Size | 60 mm (Type I) / 95 mm (Type II) |
| Min. Sample Volume | 20 mL |
| Max. Throughput | 140 kg/h (Type I) / 250 kg/h (Type II) |
| Final Particle Size | 0.3–15 mm |
| Motor Power | 1.1 kW (Type I) / 3.0 kW (Type II) |
| Net Weight | 305 kg (Type I) / 320 kg (Type II) |
| Dimensions (W × L × H) | 55 × 90 × 106 cm |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 11 |
| Batch Grinding Capacity | 1.3 L |
| Feed Particle Size | < 40 mm |
| Final Particle Size | 0.01–0.5 mm |
| Sample Compatibility | Ambient & Cryogenic (Freeze-Milling Capable) |
| Grinding Time Range | 0.5–360 s (adjustable in 0.5-s increments) |
| Blade Diameter | 128 mm |
| Peripheral Blade Speed | 67 m/s |
| Control Interface | 4.3″ Color Touchscreen + Multifunction Rotary Knob |
| Motor Protection | Thermal Power Reduction |
| Safety Features | Interlocked Lid with Pneumatic Gas Spring, Integrated Start/Stop Monitoring, Blade & Bowl Locking System |
| Connectivity | USB Port for SOP Storage & Transfer |
| Programmability | Adjustable Intervals, Reverse Rotation Mode, Microprocessor-Controlled Speed Regulation |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 13 Classic |
| Maximum Feed Size | < 20 mm |
| Throughput | up to 150 kg/h |
| Final Particle Size Range | 0.1 – 12 mm (adjustable) |
| Disc Rotation Speed | 440 rpm |
| Electrical Supply | 400 V / 3~ / 50–60 Hz |
| Power Consumption | 1830 W |
| Net Weight | 140 kg |
| Gross Weight | 170 kg |
| Dimensions (W × H × L) | 44 × 87 × 40 cm |
| Grinding Disc Materials | Stainless Steel, Manganese Steel, Tungsten Carbide, Zirconia Oxide |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 13 |
| Max. Feed Size | 20 mm |
| Max. Throughput | 150 kg/h |
| Final Particle Size Range | 0.05–12 mm |
| Disc Rotation Speed | 440 rpm |
| Electrical Supply | 400 V / 3~ / 50–60 Hz / 1830 W |
| Net Weight | 240 kg |
| Gross Weight | 275 kg |
| Dimensions (W × H × D) | 52 × 105 × 63 cm |
| Grinding Gap Adjustment Precision | ±0.05 mm |
| Compliance | CE |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Pulverisette 13 |
| Sample Hardness | Hard to Very Hard |
| Max. Feed Size | 20 mm |
| Final Particle Size Range | 0.1–12 mm |
| Adjustable Grinding Gap | Yes |
| Throughput Capacity | Up to 150 kg/h |
| Grinding Disc Materials | Cast Iron (11–12% Cr), Manganese Steel (12–13% Mn), Tungsten Carbide (90.3% WC + 9.5% Co), Zirconia (94.8% ZrO₂) |
| Motor | 3-phase, 400 V, 50–60 Hz, 1830 W |
| Rotational Speed | 439 rpm |
| Net Weight | 140 kg |
| Dimensions (L×W×H) | 44 × 87 × 40 cm |
| Collection Container Volume | 1.8 L |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 14 Classic |
| Max. Feed Size | <10 mm |
| Throughput | 0.05–5 L/h |
| Final Particle Size | 0.08–6 mm |
| Rotational Speed | 6,000–20,000 rpm |
| Motor Power | 550 W (VDE 0530 / EN 60034 compliant) |
| Electrical Supply | 200–240 V, 1-phase, 50–60 Hz |
| Rated Power Input | 1150 W |
| Net Weight | 23 kg |
| Gross Weight | 25 kg |
| Dimensions (W×H×D) | 31×48×47 cm |
| Rotor Material Options | Hardened Tool Steel, Titanium, Tungsten Carbide |
| Compliance | RoHS-conformant grinding configurations available |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 14 |
| Max. Feed Size | <15 mm |
| Throughput | ≥15 L/h |
| Final Fineness | <40 µm |
| Speed Range | 6,000–24,000 rpm |
| Sieve Aperture Range | 0.08–6 mm |
| Power Supply | 200–240 V, 1-phase, 50–60 Hz |
| Motor Output | 1500 W (VDE 0530 / EN 60034 compliant) |
| Total Power Consumption | 2500 W |
| Net Weight | 44 kg |
| Gross Weight | 70 kg |
| Dimensions (W×H×D) | 55×63×52 cm |
| Rotor Material Options | Pure Titanium, Tungsten Carbide |
| Compliance | RoHS-conformant grinding |
| Brand | Fritsch |
|---|---|
| Origin | Germany |
| Model | Pulverisette 14 |
| Sample Type | Soft to Medium-Hard Materials |
| Feed Size | ≤ 10 mm |
| Final Particle Size (D50) | ≤ 40 µm |
| Output Granularity Range | 0.01–0.5 mm |
| Throughput | 0.5–5 L/h |
| Rotor Speed | 6,000–20,000 rpm |
| Motor Power | 550 W (bearing motor), 1150 W (total electrical input) |
| Voltage/Frequency | 200–240 V / 1~ / 50–60 Hz |
| Net Weight | 23 kg |
| Dimensions (L×W×H) | 31 × 48 × 47 cm |
| Compliance | EN 61010, CE Marked |
| Construction | Stainless Steel Housing & Rotor, Titanium Rotor Option Available |
| Safety Certification | TÜV-tested per EN 61010 |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 15 |
| Maximum Feed Size | 70 × 70 mm |
| Throughput | up to 50 L/h |
| Final Particle Size | 0.25–6.00 mm |
| Rotor Speed | 2800–3400 rpm (voltage- and frequency-dependent) |
| Net Weight | 42 kg |
| Gross Weight | 72 kg |
| Dimensions (W × D × H) | 42 × 48 × 69 cm |
| Construction | Stainless steel cutting blades & interchangeable stainless steel insert sieves |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | Pulverisette 15 |
| Input Power | 2000 W |
| Rotor Speed | 2800–3400 rpm |
| Final Particle Size Range | 0.25–6 mm (dependent on interchangeable sieve inserts) |
| Max. Feed Size | 60 mm |
| Throughput | up to 50 L/h |
| Dimensions (W×D×H) | 42 × 48 × 69 cm |
| Net Weight | 42 kg |
| Gross Weight | 72 kg |
| Grinding Principle | High-speed cutting with rotating and fixed knives |
| Compliance | CE-marked |
| Warranty | 1 year |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 16 |
| Max. Feed Size | 25 mm |
| Max. Throughput | 80 L/h |
| Final Particle Size | < 100 µm |
| Motor Speed | 2,000–4,000 rpm |
| Power Supply | 230 V AC, 1~ , 50 Hz |
| Rated Power | 1,500 W |
| Net Weight | 45 kg |
| Gross Weight | 83 kg |
| Dimensions (W × D × H) | 50 × 50 × 58 cm |
| Sound Pressure Level (LpA,eq) | 85 dB(A) |
| Construction | Stainless Steel Housing with Interchangeable Trapezoidal & Round-Perforated Sieves |
| Mounting Options | Benchtop or Floor-Standing via Adjustable Support Frame |
| Integrated Air Filter | Prevents Sieve Clogging and Ensures Sample Integrity |
| Overload Protection | Built-in Thermal Cut-off |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 19 |
| Maximum Feed Size | 120 × 85 mm |
| Throughput | up to 85 L/h |
| Final Particle Size | 1–10 mm |
| Rotor Speed | 300–360 rpm |
| Motor Power | 2.2 kW (high-torque gear motor) |
| Net Weight | 75 kg |
| Gross Weight | 105 kg |
| Dimensions (W × D × H) | 45 × 65 × 63 cm |
| Cleanability | Full Access to Grinding Chamber & All Components |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 2 |
| Maximum Feed Size | 8 mm |
| Sample Volume Range | 10–190 mL |
| Final Fineness | 10–20 µm |
| Motor Speed | ~70 rpm (50 Hz) / ~80 rpm (60 Hz) |
| Grinding Bowl Inner Diameter | 130 mm, Outer Diameter: 200 mm |
| Electrical Supply | 200–240 V, 1~ , 50–60 Hz, 250 W |
| Net Weight | 24 kg |
| Gross Weight | 34 kg |
| Dimensions (L×W×H) | 31×46×41 cm |
| Grinding Bowl Materials | Agate, Alumina, Zirconia, Stainless Steel, Tempered Steel, Tungsten Carbide, Hard Ceramic |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 23 |
| Instrument Type | Micro Ball Mill |
| Grinding Principle | Planetary Ball Milling |
| Application Scope | Batch-wise Dry & Wet Grinding of Small Sample Quantities (0.1–50 mL) |
| Grinding Vessel Materials | Stainless Steel, Tungsten Carbide, Zirconium Oxide, Agate, PTFE-Lined |
| Max Rotational Speed | 2,200 rpm |
| Effective Grinding Energy | High-energy planetary motion with centrifugal acceleration up to 22 g |
| Compliance | CE-marked, Designed in Accordance with DIN EN ISO 9001 and Machinery Directive 2006/42/EC |
| Brand | Fritsch |
|---|---|
| Origin | Germany |
| Model | Pulverisette 23 |
| Instrument Type | Vibratory Micro Ball Mill |
| Sample Type | Dry or Suspended Solids (including Emulsions) |
| Max. Feed Size | < 6 mm |
| Final Particle Size | ≤ 10 µm |
| Batch Capacity | 5 mL |
| Vibration Frequency | 3000 min⁻¹ |
| Amplitude | 9 mm |
| Power Supply | 100–240 V, 50–60 Hz, 100 W |
| Net Weight | 15 kg |
| Dimensions (L×W×H) | 20 × 30 × 30 cm |
| Safety Certification | CE |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 5 Classic |
| Maximum Feed Size | < 10 mm |
| Maximum Sample Volume | 4 × 225 mL |
| Final Particle Size | < 1 µm |
| Simultaneous Sample Capacity | 8 |
| Grinding Bowl Volumes | 80 mL, 250 mL, 500 mL |
| Grinding Ball Diameters | 3, 5, 10, 15, 20, 30, 40 mm |
| Grinding Modes | Dry & Wet |
| Inert Atmosphere Compatibility | Yes |
| Power Supply | 100–120 / 200–240 V, 1–, 50–60 Hz |
| Power Consumption | 880 W |
| Net Weight | 120 kg |
| Gross Weight | 180 kg |
| Dimensions (W×H×D) | 58 × 67 × 57 cm |
| Sound Pressure Level (250 mL bowl, 10 mm balls) | ~70 dB(A) |
| Optional GTM System | Yes (real-time grinding chamber gas temperature & pressure monitoring) |
| Brand | Fritsch |
|---|---|
| Origin | Germany |
| Model | Pulverisette 5 |
| Type | Planetary Ball Mill |
| Sample Type | Hard, brittle, fibrous, or temperature-sensitive materials |
| Max. Feed Size | < 10 mm |
| Final Particle Size | < 1 µm |
| Batch Capacity | 4 × 225 mL (900 mL total) |
| Grinding Bowl Volume Options | 80, 250, 500 mL |
| Grinding Media Diameters | 10–40 mm |
| Power Supply | 100–120 / 200–240 V, 1~ , 50–60 Hz |
| Motor Output | 0.37 kW (VDE 0530 / EN 60034 compliant) |
| Weight | 120 kg (net), 180 kg (gross) |
| Dimensions (L×W×H) | 58 × 67 × 57 cm |
| Noise Level | ~70 dB(A) (measured with 250 mL bowl + 10 mm balls) |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 5 |
| Type | Planetary Ball Mill |
| Max Feed Size | <10 mm |
| Max Batch Volume | 2 × 225 mL |
| Final Particle Size | <0.1 µm |
| Speed Range | 100–800 rpm |
| Grinding Bowl Volumes | 160 mL, 250 mL, 500 mL |
| Grinding Ball Diameters | 3, 5, 10, 15, 20, 30, 40 mm |
| Grinding Modes | Dry & Wet |
| Inert Atmosphere Capability | Yes (pressurized sealing) |
| Power Supply | 100–120 V / 200–240 V, 1–phase, 50–60 Hz, 2200 W |
| Dimensions (W×H×D) | 82 × 48 × 52 cm |
| Net Weight | 110 kg |
| Gross Weight | 145 kg |
| Sound Pressure Level (250 mL bowl, 10 mm balls) | ~70 dB(A) |
| Bowl Materials | Agate, Zirconium Oxide, Stainless Steel, Tempered Steel, Tungsten Carbide (up to 500 mL) |
| Integrated GTM System Compatibility | Yes (real-time gas temperature & pressure monitoring) |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 6 Classic |
| Maximum Feed Size | < 10 mm |
| Maximum Sample Volume per Bowl | 225 mL |
| Final Particle Size | < 1 µm |
| Number of Simultaneous Samples | Up to 2 |
| Grinding Bowl Volumes | 80 mL, 250 mL, 500 mL |
| Grinding Ball Diameters | 3, 5, 10, 15, 20, 30, 40 mm |
| Grinding Modes | Dry and Wet |
| Voltage/Frequency | 100–120 V / 200–240 V, 1–phase, 50–60 Hz |
| Power Consumption | 1100 W |
| Net Weight | 63 kg |
| Gross Weight | 93 kg |
| Dimensions (W × H × D) | 37 × 53 × 50 cm |
| Optional In-situ Monitoring | GTM (Grinding Temperature & Pressure Monitoring) System |
| Available Bowl & Ball Materials | Agate, Silicon Nitride, Aluminum Oxide, Zirconium Oxide, Stainless Steel, Tempered Steel, Tungsten Carbide |
| Brand | Fritsch |
|---|---|
| Origin | Germany |
| Model | Pulverisette 6 |
| Instrument Type | Planetary Ball Mill |
| Sample Suitability | Hard and brittle materials |
| Feed Size | ≤ 10 mm |
| Final Particle Size | < 1 µm |
| Batch Capacity | 225 mL |
| Operating Speed | Up to 600 rpm (sun wheel), planetary ratio 1:2 |
| Power Supply | 100–240 V, 50–60 Hz, 1100 W |
| Noise Level | ~70 dB(A) (250 mL bowl, 10 mm balls) |
| Net Weight | 63 kg |
| Dimensions (L×W×H) | 37 × 53 × 50 cm |
| Compliance | EN 61010, CE Marked |
| Optional Accessories | GTM Gas Temperature & Pressure Monitoring System, inert gas-compatible lids, 8 bowl/ball material options, 3 bowl volumes (80/250/500 mL), 6 ball diameters (5–40 mm) |
| Brand | FRITSCH |
|---|---|
| Origin | Germany |
| Model | PULVERISETTE 7 Classic |
| Instrument Type | Planetary Ball Mill |
| Max. Feed Size | < 10 mm |
| Max. Sample Volume | 2 × 20 mL |
| Final Fineness | < 1 µm |
| Simultaneous Samples | 2 |
| Grinding Bowl Volumes | 12 mL, 45 mL |
| Grinding Ball Diameters | 3 mm, 5 mm, 10 mm, 15 mm |
| Grinding Modes | Dry & Wet |
| Voltage | 100–120 V / 200–240 V, 1–, 50–60 Hz |
| Power Consumption | 880 W |
| Dimensions (W×H×D) | 37 × 53 × 50 cm |
| Net Weight | 35 kg |
| Gross Weight | 55 kg |
| Material Options | Agate, Silicon Nitride, Alumina, Zirconia, Stainless Steel, Hardened Steel, Tungsten Carbide, Polypropylene (disposable bowls) |
| Timer Resolution | 1-second precision for grinding & cooling intervals |
| Brand | Fritsch |
|---|---|
| Origin | Germany |
| Model | Pulverisette 7 Classic |
| Grinding Principle | Planetary Ball Milling |
| Maximum Jar Rotation Speed | 800 rpm |
| Jar-to-Sun-Disk Speed Ratio | 1:2 |
| Feed Size | < 5 mm |
| Final Particle Size | < 1 µm |
| Batch Capacity | 2 × 20 mL (max) |
| Grinding Modes | Dry & Wet |
| Power Supply | 100–240 V, 50–60 Hz, 880 W |
| Motor Output | 0.37 kW |
| Net Weight | 35 kg |
| Dimensions (L×W×H) | 82 × 52 × 71 cm |
| Compliance | EN 61010, CE Marked |