IKA
Filter
Showing 211–240 of 485 results
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR 1000 control System |
| Max. Working Volume | 1000 mL |
| Min. Sample Volume with Disperser | 500 mL |
| Max. Operating Temperature | 120 °C (Heating Block up to 180 °C) |
| Vacuum Capability | down to 25 mbar |
| Max. Viscosity Handling | 100,000 mPa·s |
| Speed Range | 10–150 rpm (adjustable in 1 rpm increments) |
| Stirring Shaft Diameter (with Integrated Clamp) | 16 mm |
| Wetted Materials | AISI 316L stainless steel, Borosilicate Glass 3.3, PTFE, PEEK, FFKM |
| Reaction Vessel Ports | 2 × NS 29/32, 2 × NS 14/23, 2 × GL 14 |
| Continuous Duty Cycle | 100 % |
| Temperature Measurement Accuracy | ±0.1 K |
| Rated Torque | 3 Nm |
| Heating Power Output | 1000 W |
| Cooling Medium Max. Pressure | 1 bar |
| Weighing Capacity | 2000 g |
| Weighing Resolution | 1 g |
| pH Measurement Range | 0–14 |
| pH Resolution | 0.1 |
| Min. Adjustable Speed | 10 rpm |
| Adjustable Safety Circuit Range | 47–225 °C (±10–20 K deviation tolerance) |
| Minimum Cooling Medium Inlet Temperature | 3 °C |
| Heating Temp. Control Accuracy | ±1 K |
| Sensor-Based Temp. Control Accuracy | ±0.2 K |
| Speed Deviation | ±5 rpm |
| Display Type | TFT touchscreen |
| External Temp. Sensor Interface | PT100 |
| Stirrer Shaft Output | Specialized torque-sensing shaft |
| Torque Measurement & Trend Logging | Yes |
| Integrated Timer | Yes |
| Timer Display | TFT |
| Speed Control Resolution | 1 rpm/step |
| Cooling Method | External circulation (via integrated cooling jacket interface) |
| Process Temp. Sensor | PT100 |
| Safety Temp. Sensor | PT1000 |
| Process Temp. Display | TFT |
| Safety Temp. Display | TFT |
| External Sensor Status Indication | Yes |
| Thermal Cut-Out Protection | Yes |
| MV1 Solenoid Valve Interface | Yes |
| pH Sensor Interface | Yes |
| pH Display | TFT |
| Dimensions (W×D×H) | 443 × 360 × 295 mm |
| Weight | 16 kg |
| Ambient Operating Temperature | 5–40 °C |
| Max. Relative Humidity | 80 % (non-condensing) |
| Enclosure Rating | IP21 (per DIN EN 60529) |
| Communication Interfaces | RS232, USB, Bluetooth |
| Electrical Supply | 230 V AC, 50/60 Hz (optional 115 V version available) |
| Max. Input Power | 1200 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Modular Benchtop Reaction System |
| Model | LR 1000 control System |
| Vessel Capacity | 1 L (500–1000 mL operational range) |
| Maximum Operating Temperature | 120 °C (heating up to 180 °C for jacket |
| Vacuum Capability | 25 mbar |
| Pressure Rating | Medium-pressure design (rated for ≤1 bar cooling medium pressure) |
| Stirring Speed Range | 10–150 rpm (adjustable in 1 rpm increments) |
| Torque Output | Up to 3 Nm |
| Viscosity Handling Limit | ≤100,000 mPa·s |
| Temperature Control Precision | ±0.2 K (with external PT100 sensor), ±1 K (integrated heating control) |
| Power Supply | 230/115 V, 50/60 Hz |
| Input Power | 1200 W (heating: 1000 W) |
| Cooling Medium Inlet Temp. | ≥3 °C |
| IP Rating | IP21 |
| Safety Compliance | DIN EN 60529, integrated safety circuit with automatic shutdown upon lid opening or vessel removal |
| Interface Options | RS232, USB, analog output (not available), external PT100 input |
| Software Compatibility | labworldsoft (optional), third-party SCADA/PLC integration via serial protocol |
| Material of Construction | Borosilicate glass 3.3 (DIN ISO 3585), AISI 316L stainless steel, PTFE, FKM |
| Sealing Interfaces | 1 × NS 29/32, 3 × NS 14/23 ground-glass joints |
| Dimensions (W×D×H) | 443 × 360 × 295 mm |
| Weight | 16 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST Starvisc 200 |
| Working Volume | 500–2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity | 100,000 mPa·s |
| Min. Agitation Speed | 6 rpm |
| Lift Stroke | 390 mm |
| Stirring Shaft Max. Torque | 200 N·cm |
| Wetted Materials | Borosilicate Glass (DIN ISO 3585), FFPM, PTFE, Stainless Steel 1.4571 |
| Reactor Opening Configuration | 3× NS 29/32 + 2× NS 14/23 |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST the Allrounder |
| Usable Volume | 500–2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity | 100,000 mPa·s |
| Speed Range | 8–290 rpm |
| Lifting Stroke | 390 mm |
| Wetted Materials | Borosilicate Glass (DIN ISO 3585), FFPM, PTFE, Stainless Steel 1.4571 |
| Reactor Opening | 3 × NS 29/32, 2 × NS 14/23 |
| Max. Stirring Torque | 200 N·cm |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Control | Microprocessor-based speed regulation with load-compensated stability |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Model | LR-2.ST the Allrounder |
| Reactor Type | Jacketed Glass Reactor System |
| Working Volume | 0.5–2.0 L |
| Maximum Operating Pressure | Up to 6 bar (gauge) |
| Vacuum Capability | ≤25 mbar (abs) |
| Temperature Range | Ambient to +230 °C |
| Speed Range | 8–290 rpm |
| Max. Torque | 120 N·cm |
| Max. Viscosity | 100,000 mPa·s |
| Drive Motor | EUROSTAR 200 control motor with microprocessor-based speed regulation |
| Sealing Material | FFPM (perfluoroelastomer) for solvent and high-temp resistance |
| Wetted Parts | Borosilicate glass 3.3, PTFE, FFPM, 1.4571 stainless steel |
| Port Configuration | 3 × NS 29/32 + 2 × NS 14/23 standard ground glass joints |
| Vertical Travel of Lift Stand | 390 mm |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Power Supply | 115 V, 50/60 Hz |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST the Compact Power |
| Usable Volume | 500–2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity Handling | 50,000 mPa·s |
| Speed Range | 8–290 rpm |
| Lifting Stroke | 390 mm |
| Wetted Materials | Borosilicate Glass (DIN ISO 3585), FFPM, PTFE, Stainless Steel 1.4571 |
| Reactor Opening Configuration | 3× NS 29/32 + 2× NS 14/23 |
| Max. Stirring Torque | 60 N·cm |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Control | Microprocessor-based speed regulation with load compensation |
| Safety | Integrated safety switch, motor torque monitoring, overheat protection |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST the High-Performer |
| Usable Volume | 500–2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity Handling | 150,000 mPa·s |
| Speed Range | 8–290 rpm |
| Lifting Column Travel | 390 mm |
| Wetted Materials | Borosilicate Glass (DIN ISO 3585), FFPM, PTFE, Stainless Steel 1.4571 |
| Reactor Opening Configuration | 3× NS 29/32 + 2× NS 14/23 |
| Max. Stirring Torque | 660 N·cm |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model | LR-2.ST the High-Performer |
| Instrument Category | Laboratory Reactor |
| Usable Volume | 0.5–2 L |
| Vessel Material | Borosilicate Glass (DIN ISO 3585), Stainless Steel 1.4571 (AISI 316Ti), FFPM & PTFE Seals |
| Operating Pressure Range | Up to 6 bar (gauge), Down to 25 mbar (absolute vacuum) |
| Temperature Range | Ambient to +230 °C |
| Vacuum Capability | ≤25 mbar (absolute) |
| Max. Viscosity Handling | 150,000 mPa·s |
| Speed Range | 8–290 rpm |
| Torque-Controlled Speed Stability | Microprocessor-regulated, load-compensated |
| Vertical Travel of Lifting Column | 390 mm |
| Port Configuration | 3 × NS 29/32, 2 × NS 14/23 |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 25 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH (non-condensing) |
| Power Supply | 115 V, 50/60 Hz |
| Compliance | CE, UL Listed, Designed per EN 61000-6-2 / EN 61000-6-4 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | LR-2.ST the Versatile |
| Usable Volume | 500–2000 mL |
| Temperature Range | Ambient to 230 °C |
| Vacuum Capability | Down to 25 mbar |
| Max. Viscosity Handling | 70,000 mPa·s |
| Speed Range | 8–290 rpm |
| Lifting Column Travel | 390 mm |
| Wetted Materials | Borosilicate Glass (DIN ISO 3585), FFPM, PTFE, Stainless Steel 1.4571 |
| Reactor Opening Configuration | 3× NS 29/32 + 2× NS 14/23 |
| Max. Stirring Torque | 100 N·cm |
| Dimensions (W×H×D) | 460 × 1240 × 430 mm |
| Weight | 34 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Control | Microprocessor-based speed regulation with load-compensated stability |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Modular Benchtop Reactor System |
| Model | LR-2.ST the Versatile |
| Vessel Capacity | 2 L (500–2000 mL usable volume) |
| Operating Pressure Range | Up to 6 bar (gauge), down to 25 mbar absolute vacuum |
| Temperature Range | Ambient to +230 °C |
| Speed Range | 8–290 rpm |
| Max. Torque | 100 N·cm |
| Max. Viscosity Handling | 70,000 mPa·s |
| Drive Motor | EUROSTAR 100 control-type stirrer with bidirectional rotation |
| Sealing Material in Contact | FFPM (perfluoroelastomer), PTFE, borosilicate glass 3.3, stainless steel 1.4571 (AISI 316Ti) |
| Port Configuration | 3 × NS 29/32, 2 × NS 14/23 |
| Vertical Travel of Lift Stand | 390 mm |
| Dimensions (W × H × D) | 460 × 1240 × 430 mm |
| Weight | 34 kg |
| Power Supply | 115 V, 50/60 Hz |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH (non-condensing) |
| Control Interface | Removable WiCo wireless controller with real-time torque trend display and microprocessor-based speed regulation |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | M 20 Universal Mill |
| Instrument Type | Grinder |
| Sample Applicability | Hard, brittle materials |
| Feed Particle Size | < 7 mm |
| Output Particle Size | 1–80 µm |
| Batch Grinding Capacity | 250 mL |
| Grinding Media | Stainless steel cutting head (1.4034) and grinding chamber (1.4301) |
| Motor Input Power | 450 W |
| Motor Output Power | 225 W |
| Max. Speed | 20,000 rpm |
| Max. Peripheral Speed | 72 m/s |
| Max. Feed Hardness | 5 Mohs |
| Operating Cycle | 7 min ON / 10 min OFF |
| Cooling | Water-jacketed chamber (external coolant connection) or dry ice cooling |
| Dimensions (W × H × D) | 170 × 350 × 170 mm |
| Weight | 6.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤ 80 % |
| Protection Class | IP 21 (DIN EN 60529) |
| Voltage | 230 / 115 / 100 V |
| Frequency | 50/60 Hz |
| Total Input Power | 550 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | General Distributor |
| Origin Category | Imported |
| Model | M 20 Universal Mill |
| Price | Upon Request |
| Motor Input Power | 450 W |
| Motor Output Power | 225 W |
| Max. Speed | 20,000 rpm |
| Max. Peripheral Speed | 72 m/s |
| Max. Working Volume | 250 mL |
| Max. Feed Hardness | 5 Mohs |
| Max. Feed Particle Size | 7 mm |
| Rotor/Cutting Tool Material | Stainless Steel 1.4034 |
| Grinding Chamber Material | Stainless Steel 1.4301 |
| Operating Time (ON) | 7 min |
| Cooling Interval (OFF) | 10 min |
| Jacketed Grinding Chamber (Water-Coolable) | Yes |
| Dry-Ice Cooling Compatible | Yes |
| Dimensions (W × H × D) | 170 × 350 × 170 mm |
| Weight | 6.6 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Ingress Protection | IP21 (per DIN EN 60529) |
| Voltage | 230 V AC |
| Frequency | 50/60 Hz |
| Total Instrument Input Power | 550 W |
| Optional Voltages | 230 V / 115 V / 100 V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | magic LAB |
| Pricing | Upon Request |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | magic PLANT |
| Pricing | Available Upon Request |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Model | Matrix Delta Plus |
| Temperature Range | –30 °C to +110 °C |
| Temperature Accuracy | ±1 °C (at setpoint) |
| Temperature Stability | ±0.5 °C |
| Temperature Homogeneity | ±0.5 °C (within block) |
| Heating Rate | 5.5 °C/min (max) |
| Cooling Rate | 2 °C/min (from ambient down to –30 °C) |
| Max Load Capacity | 0.3 kg |
| Timer Range | 1 s – 6000 min |
| Display | TFT LCD |
| Programmable Ramp Rates | Yes |
| Heating Power | 100 W |
| Cooling Power | 72 W |
| Integrated Peltier Cooling | Yes |
| Interchangeable Modules | Up to 10 standard configurations |
| Safety Cut-off | 145 °C |
| Dimensions (W × D × H) | 216 × 127 × 351 mm |
| Net Weight | 9.5 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80 % RH |
| Ingress Protection | IP21 |
| Interfaces | RS232, USB |
| Input Voltage | 100–240 V AC, 50/60 Hz |
| Max Input Power | 230 W |
| Operating Modes | Timer, Continuous, Program |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MATRIX Delta Plus |
| Max Load | 0.3 kg |
| Timer Range | 1 s – 6000 min |
| Operating Modes | Timed, Continuous, Programmable (incl. Ramp) |
| Temperature Range | −10 °C to 110 °C |
| Temp. Control Accuracy | ±0.5 °C |
| Temp. Uniformity | ±0.5 °C |
| Heating Rate | 5.5 °C/min |
| Cooling Rate | 2 °C/min (within 30 °C below ambient) |
| Heating Power | 100 W |
| Cooling Power | 72 W |
| Display | TFT touchscreen |
| Interfaces | RS232, USB |
| Enclosure Rating | IP21 |
| Dimensions (W×D×H) | 216 × 127 × 351 mm |
| Weight | 9.5 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Safety Cut-off | 145 °C |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Max Input Power | 230 W |
| Fuse | 2× T4A 250V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MATRIX Orbital Delta F0.5 |
| Orbit Diameter | 3 mm |
| Max Load | 0.3 kg |
| Speed Range | 0–2000 rpm |
| Min Adjustable Speed | 300 rpm |
| Speed Accuracy | ±30 rpm |
| Speed Resolution | 10 rpm steps |
| Timer Range | 1 s – 6000 min |
| Heating Range | RT +4 °C to 100 °C |
| Heating Power | 100 W |
| Temp. Control Accuracy | ±0.5 °C |
| Temp. Uniformity | ±0.5 °C (20–45 °C), ±1.5 °C (other ranges) |
| Temp. Stability | ±0.5 °C |
| Heating Rate | 15 °C/min |
| Sample Capacity | 24 × 0.5 mL tubes |
| Dimensions (W×D×H) | 216 × 149 × 351 mm |
| Weight | 9.2 kg |
| Ambient Operating Conditions | 5–40 °C, RH ≤80% |
| Protection Class | IP21 (DIN EN 60529) |
| Interfaces | RS232, USB |
| Power Supply | 100–240 V, 50/60 Hz |
| Max Input Power | 240 W |
| Fuse | 2× T4A 250V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Model | MATRIX Orbital Delta F1.5 |
| Instrument Type | Temperature-Controlled Orbital Shaker |
| Timer Range | 1 s – 6000 min |
| Orbital Speed | 0–1500 rpm |
| Orbit Diameter | 3 mm |
| Temperature Range | Ambient +4 °C to 100 °C |
| Heating Power | 100 W |
| Temperature Accuracy | ±0.5 °C |
| Temperature Uniformity | ±0.5 °C (20–45 °C), ±1.5 °C (other ranges) |
| Heating Rate | 11 °C/min |
| Max Load | 0.3 kg |
| Dimensions (W×D×H) | 216 × 158 × 351 mm |
| Weight | 9.2 kg |
| Protection Rating | IP21 |
| Interface | RS232, USB-B |
| Power Supply | 100–240 V, 50/60 Hz |
| Input Power | 240 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MATRIX Orbital Delta F1.5 |
| Orbit Diameter | 3 mm |
| Max Load | 0.3 kg |
| Speed Range | 0–1500 rpm |
| Min Adjustable Speed | 300 rpm |
| Speed Accuracy | ±30 rpm |
| Speed Resolution | 10 rpm steps |
| Timer Range | 1 s – 6000 min |
| Heating Range | RT +4 °C to 100 °C |
| Heating Power | 100 W |
| Temp. Control Accuracy | ±0.5 °C |
| Temp. Stability | ±0.5 °C |
| Temp. Uniformity | ±0.5 °C (@20–45 °C), ±1.5 °C (@other ranges) |
| Heating Rate | 11 °C/min |
| Display | TFT (speed & temp.) |
| Sample Capacity | 24 × 1.5 mL tubes |
| Dimensions (W×D×H) | 216 × 158 × 351 mm |
| Weight | 9.2 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Protection Class | IP21 (DIN EN 60529) |
| Interfaces | RS232, USB |
| Voltage | 100–240 V AC, 50/60 Hz |
| Max Input Power | 240 W |
| Fuse | 2× T4A 250V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MATRIX Orbital Delta F2.0 |
| Orbit Diameter | 3 mm |
| Max Load | 0.3 kg |
| Speed Range | 0–1500 rpm |
| Min Adjustable Speed | 300 rpm |
| Speed Accuracy | ±30 rpm |
| Speed Resolution | 10 rpm steps |
| Timer Range | 1 s – 6000 min |
| Heating Range | RT +4 °C to 100 °C |
| Heating Power | 100 W |
| Temp. Control Accuracy | ±0.5 °C |
| Temp. Uniformity | ±0.5 °C (20–45 °C), ±1.5 °C (>45 °C) |
| Heating Rate | 13 °C/min |
| Sample Capacity | 24 × 2.0 mL tubes |
| Dimensions (W×D×H) | 216 × 158 × 351 mm |
| Weight | 9.2 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Protection Class | IP21 |
| Interfaces | RS232, USB |
| Power Supply | 100–240 V, 50/60 Hz |
| Max Input Power | 240 W |
| Fuse | 2 × T4A 250V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MATRIX Orbital Delta FP |
| Operating Principle | Orbital Shaking with Integrated Peltier Heating |
| Speed Range | 0–2000 rpm |
| Orbit Diameter | 3 mm |
| Max Load | 0.3 kg |
| Temperature Range | RT +4 °C to 100 °C |
| Temp Stability | ±0.5 °C (20–45 °C) |
| Temp Uniformity | ±0.5 °C (20–45 °C) |
| Heating Power | 100 W |
| Ramp Rate | 18 °C/min |
| Display | TFT Screen (Speed & Temp) |
| Timer Range | 1 s – 6000 min |
| Input Power | 240 W |
| Voltage | 100–240 V, 50/60 Hz |
| Enclosure Rating | IP21 |
| Interfaces | RS232, USB |
| Dimensions (W×D×H) | 216 × 147 × 351 mm |
| Weight | 9.2 kg |
| Ambient Operating Conditions | 5–40 °C, ≤80% RH |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA-Werke GmbH & Co. KG |
| Product Type | Temperature-Controlled Orbital Shaker |
| Model | Matrix Orbital Delta Plus |
| Timing Range | 1 s – 6000 min |
| Orbital Speed | 0–3000 rpm |
| Orbit Diameter | 3 mm |
| Temperature Range | RT−15 °C to 100 °C |
| Heating Rate | up to 6 °C/min |
| Cooling Rate | up to 0.8 °C/min |
| Programmable Ramp Control | Yes |
| Display | TFT touchscreen |
| Interfaces | RS232, USB |
| IP Rating | IP21 |
| Dimensions (W×D×H) | 216 × 127 × 351 mm |
| Weight | 10 kg |
| Power Input | 100–240 V, 50/60 Hz, max. 230 W |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MATRIX Orbital |
| Orbit Diameter | 3 mm |
| Max Load | 0.3 kg |
| Speed Range | 0–3000 rpm |
| Min Adjustable Speed | 300 rpm |
| Speed Accuracy | ±30 rpm |
| Speed Resolution | 10 rpm steps |
| Timer Range | 1 s – 6000 min |
| Display | TFT |
| Operation Modes | Timed & Continuous |
| Compatible Plates | Microtiter (96-well), PCR, Deep Well (DWP), 24×0.5 mL / 24×1.5 mL / 24×2.0 mL tubes |
| Dimensions (W×D×H) | 200 × 120 × 320 mm |
| Weight | 7.2 kg |
| Ambient Temp. Range | 5–40 °C |
| Relative Humidity | ≤80% RH |
| Ingress Protection | IP21 (per DIN EN 60529) |
| Interfaces | RS232, USB |
| Power Supply | 100–240 V AC, 50/60 Hz |
| Rated Power | 80 W |
| Fuse | 2×T4A 250V |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model | IKA Matrix Orbital |
| Instrument Type | Ambient-Temperature Orbital Shaker |
| Timer Range | 1 s – 6000 min |
| Oscillation Frequency | 0–3000 rpm |
| Orbit Diameter | 3 mm |
| Temperature Control | Ambient Only |
| Platform Quantity | 1 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Type | Magnetic Stirrer |
| Model | Maxi MR 1 |
| Maximum Stirring Volume | 150 L (H₂O) |
| Speed Range | 0–600 rpm |
| Display | LED/LCD Digital Speed Readout |
| Timer Function | 0–56 min or Continuous Operation |
| Motor Input Power | 80 W |
| Motor Output Power | 35 W |
| Max Stir Bar Length | 155 mm |
| Plate Material | Stainless Steel 1.4301 (AISI 304) |
| Plate Dimensions | 500 × 500 mm |
| Overall Dimensions | 505 × 110 × 585 mm |
| Weight | 16 kg |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Ingress Protection | IP21 |
| Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Compliance | DIN EN 60529 |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer Type | Manufacturer |
| Product Category | Imported |
| Model | Maxi MR 1 digital |
| Instrument Type | Magnetic Stirrer |
| Maximum Stirring Volume | 150 L (H₂O) |
| Speed Range | 0–600 rpm |
| Motor Output Power | 35 W |
| Stir Bar Max Length | 155 mm |
| Working Plate Material | Stainless Steel 1.4301 |
| Plate Dimensions | 500 × 500 mm |
| Timer Range | 0–56 min (or continuous) |
| Interface | RS 232 and USB |
| Protection Rating | IP21 |
| Ambient Temperature Range | 5–40 °C |
| Relative Humidity Limit | ≤80 % |
| Input Voltage | 230 V / 100–120 V |
| Frequency | 50/60 Hz |
| Input Power | 80 W |
| Net Weight | 21.36 kg |
| Dimensions (W × H × D) | 505 × 110 × 585 mm |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10 basic Microfine Grinder Drive |
| Motor Input Power | 1000 W |
| Motor Output Power | 500 W |
| Speed Range | 3000 – 6500 rpm |
| Continuous Operation Time | 120 min (ON) / 30 min (OFF) |
| Cooling | Dry ice compatible in grinding chamber |
| Dimensions (W × D × H) | 320 × 380 × 300 mm |
| Weight | 9.7 kg |
| Ambient Temperature Range | 5 – 40 °C |
| Relative Humidity Limit | ≤80 % |
| Protection Class | IP 22 (DIN EN 60529) |
| Voltage | 230 V, 50/60 Hz |
| Optional Voltages | 115 V or 100–115 V |
| Grinding Principle | Shear and Impact |
| Material Contact Surfaces | Stainless Steel |
| Grind Head & Sieve | Sold Separately |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Manufacturer | IKA Werke GmbH & Co. KG |
| Product Type | Benchtop Microfine Grinder |
| Model | MF 10 basic |
| Input Power | 1000 W |
| Output Power | 500 W |
| Speed Range | 3000–6500 rpm |
| Max. Feed Size | <15 mm |
| Final Particle Size | 0.01–0.5 mm (typical output ≤0.25 mm with appropriate sieve) |
| Continuous Operation Time | up to 120 min |
| Cooling | Optional dry ice cooling in grinding chamber |
| Dimensions (W×D×H) | 320 × 380 × 300 mm |
| Weight | 9.7 kg |
| Ambient Operating Temperature | 5–40 °C |
| Relative Humidity Limit | ≤80 % RH |
| Protection Class | IP22 (DIN EN 60529) |
| Voltage/Frequency | 230 V / 50 Hz or 115 V / 60 Hz |
| Grinding Principle | High-speed shear and impact |
| Material Contact Parts | Stainless steel (AISI 304) |
| Sieve & Grinding Head | Sold separately |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10.1 |
| Maximum Peripheral Speed | 24.5 m/s |
| Maximum Feed Particle Size | 15 mm |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Cooling Capability | Dry Ice Integration in Grinding Chamber |
| Dimensions (W × D × H) | 320 × 560 × 300 mm |
| Weight | 2.633 kg |
| Sieve Compatibility | Interchangeable stainless steel sieves (optional, not included) |
| Collection Vessel | Standard NS 29 threaded container |
| Brand | IKA |
|---|---|
| Origin | Germany |
| Model | MF 10.2 Impact Grinding Head |
| Operating Principle | Impact Milling |
| Maximum Peripheral Speed | 34 m/s |
| Maximum Feed Hardness | 6 Mohs |
| Maximum Feed Particle Size | 10 mm |
| Grinding Chamber Material | Stainless Steel 1.4308 (AISI 304 equivalent) |
| Cooling Option | Dry Ice Insertion in Grinding Chamber |
| Dimensions (W × D × H) | 320 × 450 × 300 mm |
| Weight | 2.942 kg |
| Sieve Compatibility | Interchangeable stainless steel sieves (sold separately) |
| Collection Vessel | Standard NS 29 threaded container |