Litilit
Filter
Showing all 2 results
| Key | Brand: Litilit |
|---|---|
| Model | Biolit-2 |
| Center Wavelength | 1050 ± 5 nm |
| Average Power | > 2 W |
| Pulse Duration | < 70 fs (typ. 55 fs) |
| Pulse Duration Stability | ±3 fs |
| Strehl Ratio | > 0.9 |
| Pre-chirp Tuning Range | −8000 to +500 fs² |
| Repetition Rate | 15/20/30/40 MHz (factory-set) |
| Analog Power Control | 1–100% |
| Beam Quality M² | < 1.2 (typ. 1.05) |
| Beam Roundness | > 0.9 (typ. 0.94) |
| Beam Diameter (1/e²) | 1.5 ± 0.3 mm |
| Beam Divergence (full angle) | < 1.5 mrad |
| Beam Pointing Stability (RMS) | < 20 μrad |
| Beam Pointing vs. Temperature | < 15 μrad/°C |
| Pulse Energy Stability (RMS) | < 1% |
| Power Stability (RMS) | < 1% |
| Warm-up Time | < 10 min |
| Cooling | Passive air-cooling (laser head) |
| Dimensions (L×W×H) | Laser Head: 313 × 152 × 107 mm³ |
| Control Unit | 449 × 370 × 140 mm³ |
| Cable Length | 3 ± 0.1 m |
| Input Voltage | 24 V DC (with integrated 100–240 V AC, 47–63 Hz power supply) |
| Operating Temp. | 18–30 °C |
| Storage/Transport Temp. | −20 to +70 °C |
| Harmonic Option | 0.4 W @ 525 nm (Biolit-2 SH variant) |
| Interfaces | USB, CAN |
| Patents | US10038297, JP6276471, EP3178137, CN106575849 |
| Brand | Litilit |
|---|---|
| Origin | Lithuania |
| Model | Indylit 10 |
| Output Wavelength | 1030 ± 2 nm (fundamental), 515 ± 1 nm (SHG) |
| Spectral Bandwidth (FWHM) | < 4 nm (1030 nm), < 3 nm (515 nm) |
| Average Power | > 10 W @ 100 kHz / > 12 W @ 1 MHz (1030 nm) |
| Pulse Energy | > 100 µJ (1030 nm), > 50 µJ (515 nm) |
| Pulse Duration | < 400 fs (adjustable from 400 fs to 4 ps) |
| Repetition Rate | 100 kHz – 1.6 MHz (burst mode down to 30 kHz) |
| Beam Quality (M²) | < 1.2 |
| Beam Roundness | > 0.90 (1030 nm), > 0.85 (515 nm) |
| Beam Diameter (1/e²) | 2.6 ± 0.2 mm (1030 nm), 2.2 ± 0.2 mm (515 nm) |
| Polarization | Linear, > 200:1 extinction ratio |
| Pre-pulse Contrast | > 1:1000 |
| Post-pulse Contrast | > 1:100 |
| Beam Divergence (full angle) | < 1 mrad |
| Beam Pointing Stability (RMS) | < 20 µrad |
| Power Stability (RMS, 1 s) | < 1% (1030 nm), < 2% (515 nm) |
| Pulse Energy Stability (RMS, 10 s) | < 1% (1030 nm), < 2% (515 nm) |
| Warm-up Time (cold start) | < 30 min |
| Warm-up Time (hot start) | < 3 min |
| Cooling | Passive air-cooled laser head, active fan-cooled control unit |
| Dimensions (L×W×H) | Laser Head: 498 × 248 × 194 mm³ |
| Control Unit | 490 × 370 × 140 mm³ |
| AC/DC Converter | 250 × 125 × 60 mm³ |
| Input Voltage | 100–240 V AC, 47–63 Hz → 24 V DC (25 A) |
| Max Power Consumption | 700 W |
| Avg. Power Draw (steady state) | 300 W |
| Operating Temperature | 18–30 °C |
| Storage/Transport Temp | −20 to +70 °C |
| Interfaces | CAN, USB |
| Pulse Picking | Integrated TTL-gated pulse selector (1–12 pulses/burst) |
| Switching time between outputs | < 1 s |