MEMMERT
Filter
Showing all 19 results
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | CTC256 |
| Instrument Type | Upright Chamber |
| Temperature Range (with humidity control) | +10 °C to +95 °C |
| Temperature Range (dry operation) | −42 °C to +190 °C |
| Humidity Range | 10–98 %RH |
| Temperature Uniformity | ±0.5 K to ±2 K |
| Temperature Stability | ±0.5 °C |
| Internal Volume | 256 L |
| Internal Dimensions (W×H×D) | 640 × 670 × 597 mm |
| External Dimensions (W×H×D) | 898 × 1730 × 1100 mm |
| Power Supply | 400 V, 3-phase, 50 Hz |
| Rated Power | ~7,000 W |
| Net Weight | ~362 kg |
| Compliance Certificates | Factory Calibration at −20 °C to +160 °C |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HCP108 |
| Instrument Type | Upright Environmental Test Chamber |
| Internal Volume | ~108 L |
| Interior Dimensions (W×H×D) | 560 × 480 × 400 mm |
| Exterior Dimensions (W×H×D) | 710 × 778 × 550 mm |
| Interior Material | Electropolished Stainless Steel (Deep-Drawn) |
| Exterior Material | Stainless Steel Body with Galvanized Steel Rear Panel |
| Temperature Range (without humidity control) | 20–160 °C |
| Temperature Range (with humidity control) | 20–90 °C |
| Temperature Uniformity (per DIN 12880 at 50 °C) | ≤ ±0.3 °C |
| Temperature Stability (per DIN 12880 at 50 °C) | ≤ ±0.15 °C |
| Humidity Range | 20–95 % RH (capacitive sensor, sterilizable) |
| Humidity Control | Microprocessor-driven steam generation + desiccant-based dehumidification |
| Power Supply | 230 V / 50–60 Hz |
| Max. Power Consumption | ~1000 W |
| Net Weight | ~70 kg |
| Gross Weight | ~78 kg |
| Standard Accessories | 2 stainless steel sliding shelves (556 × 361 mm), factory calibration certificate (60 °C center point), Celsius 2005 software (standard), internal memory card (1024 KB ring buffer, ~3 months @ 1-min interval) |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HCP153 |
| Instrument Type | Upright Environmental Test Chamber |
| Internal Volume | ~153 L |
| Chamber Dimensions (W×H×D) | 480 × 640 × 500 mm |
| External Dimensions (W×H×D) | 630 × 938 × 650 mm |
| Interior Material | Electropolished Stainless Steel (Deep-Drawn) |
| Exterior Material | Stainless Steel Front, Galvanized Steel Rear |
| Temperature Range (without humidity control) | 20–160 °C |
| Temperature Uniformity (per DIN 12880 at 50 °C) | ≤ ±0.3 K |
| Temperature Stability (per DIN 12880 at 50 °C) | ≤ ±0.15 K |
| Humidity Range | 20–95 % RH (capable of steam-based humidification and condensation-controlled dehumidification) |
| Humidity Sensor | Sterilizable Capacitive RH Sensor |
| Control System | Microprocessor-Based Fuzzy Logic Controller with Dual Pt100 A-Class (4-wire) Temperature Sensors |
| Data Logging | Built-in 1024 KB Circular Memory (≈3 months @ 1-min interval) |
| Communication Interfaces | Standard RS232, Optional RS485 / Ethernet / USB |
| Software | Celsius 2005 (standard), Celsius FDA Edition (21 CFR Part 11 compliant, optional) |
| Safety Systems | Triple Independent Temperature Protection (Mechanical TB, Electronic TWW, ASF Auto-Safety Function), Audible/Visual Alarms for Over-/Under-Temperature, Over-/Under-Humidity, Door Open, Empty Water Reservoir |
| Programmability | Up to 40-step time-temperature-humidity profiles via controller or MemoryCard XL |
| Certification | Factory Calibration Certificate (60 °C center point), Optional IQ/OQ Documentation Packages (DIN 12880, DIN 12900-1), STERICard for 160 °C Sterilization Cycle (4 h) |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HCP246 |
| Chamber Type | Upright |
| Internal Volume | 246 L |
| Internal Dimensions (W×H×D) | 640 × 640 × 600 mm |
| External Dimensions (W×H×D) | 790 × 938 × 750 mm |
| Construction | Electropolished Stainless Steel Interior, Galvanized Steel Exterior |
| Temperature Range (without humidity control) | 20–160 °C |
| Temperature Uniformity (per DIN 12880, at 50 °C) | ≤ ±0.3 °C |
| Temperature Stability (per DIN 12880, at 50 °C) | ≤ ±0.15 °C |
| Humidity Range | 20–95 % RH (capable of sterilization at 160 °C) |
| Humidity Sensor | Sterilizable capacitive sensor |
| Control System | Microprocessor-based dual-loop PID controller with integrated diagnostics |
| Calibration | 3-point temperature & 2-point humidity calibration via front panel |
| Data Logging | 1024 KB circular memory (≈3 months @ 1-min interval) |
| Compliance | DIN 12880, DIN 12900-1, FDA 21 CFR Part 11 (with optional Celsius FDA Edition software), GLP/GMP-ready architecture |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HPP110 |
| Instrument Type | Upright Climate Chamber |
| Internal Volume | 108 L |
| External Dimensions (W×H×D) | 710 × 760 × 620 mm (excluding handle) |
| Internal Dimensions (W×H×D) | 560 × 480 × 400 mm |
| Standard Shelving | 2 adjustable perforated stainless steel shelves |
| Temperature Range (with illumination) | 10–40 °C |
| Temperature Range (without illumination) | 0–70 °C |
| Temperature Uniformity (per DIN 12 880 | 2007-05): ≤ ±0.4 °C at 10 °C and 37 °C |
| Temperature Stability (per DIN 12 880 | 2007-05): ≤ ±0.1 °C over time |
| Humidity Range | 10–90 %RH (10–85 %RH with illumination active) |
| Humidity Control | Capacitive sensor + microprocessor-controlled humidification/dehumidification via distilled water recirculation pump and thermally blocked bacterial barrier |
| Illumination | Dual-mode tunable LED lighting — Mode 1: Cool white (5500 K), Mode 2: Mixed cool + warm white (2700 K) |
| Max irradiance | 10,000 lux at 10 cm distance |
| Temperature & Humidity Monitoring | PT100 Class A four-wire sensor (redundant fault detection), capacitive RH sensor with auto-diagnostic system |
| Safety Systems | Triple-level overtemperature protection (including Pt100-based monitoring per Protection Class 3.3), ASF (Automatic Safety Function), relay-based heater cutoff, audible/visual alarms for T/RH deviation, empty water tank, or sensor failure |
| Data Logging | Internal 1024 KB memory |
| Programming | Up to 40-stage weekly program (MEMoryCard XL compatible) |
| Connectivity | Parallel port for PCL3-compatible inkjet printers (USB via optional converter) |
| Calibration | On-device 3-point temperature / 2-point humidity calibration (20 %RH, 90 %RH) |
| Display Language Options | German, English, Spanish, French, Italian |
| Power Supply | 230 V ±10 %, 50/60 Hz |
| Max Power Consumption (heating/cooling + lighting) | 400 W |
| Net Weight | 66 kg |
| Environmental Technology | Thermoelectric (Peltier) cooling, LED illumination — zero refrigerants, low heat load, high energy efficiency |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HPP260 |
| Instrument Type | Upright Environmental Test Chamber |
| Internal Volume | 256 L |
| Internal Dimensions (W×H×D) | 640 × 800 × 500 mm |
| External Dimensions (W×H×D) | 824 × 1186 × 774 mm |
| Weight (Net/Gross) | 103 / 121 kg |
| Temperature Range (Dark) | 0–70 °C |
| Temperature Range (Illuminated) | 10–40 °C |
| Temperature Setpoint Accuracy | ±0.1 K |
| Humidity Range (Dark) | 10–90 %RH |
| Humidity Range (Illuminated) | 10–85 %RH |
| Humidity Setpoint Accuracy | ±1 %RH |
| Standard Shelves | 2 pcs (Max. 9) |
| Construction | AISI 304 Stainless Steel (1.4301) Interior |
| Cooling Technology | Peltier-based Thermoelectric System |
| Compliance | ICH Q1A(R3), RoHS, GLP-ready |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | HPP750 |
| Instrument Type | Upright Environmental Test Chamber |
| Temperature Range | 0–70 °C (without illumination) |
| Humidity Range | 10–90 %RH (without illumination) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Deviation | ±2 %RH |
| Heating Rate | 5 °C/min |
| Internal Volume | 749 L |
| Chamber Dimensions (W×H×D) | 1040 × 1200 × 600 mm |
| External Dimensions (W×H×D) | 1224 × 1726 × 874 mm |
| Standard Shelves | 2 (max. 14) |
| Net Weight | 234 kg |
| Gross Weight | 284 kg |
| Compliance | ICH Q1A, RoHS, GLP-ready |
| Control System | P-type PID controller with 0.1 K temperature setpoint resolution and 1 %RH humidity setpoint resolution |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | ICP700 |
| Temperature Range | 0–60 °C |
| Internal Volume | 416 L |
| Chamber Dimensions (W×H×D) | 1040 × 800 × 500 mm |
| External Dimensions (W×H×D) | 1198 × 1495 × 656 mm |
| Cooling Agent | R134a (CFC-/HCFC-free) |
| Control System | Microprocessor-based Fuzzy Logic Controller |
| Programmability | Up to 9-segment temperature/time profiles |
| Interface | RS232 (standard), optional RS485 |
| Software Support | Celsius 2000 (free) |
| Memory Card | MEMoryCard XL compatible |
| Safety | Dual independent overtemperature protection (TWW Class 3.1 + TB Class 1) |
| Heating/Cooling Architecture | Separated top-mounted heating unit and bottom-mounted refrigeration unit |
| Humidity Preservation | Fully enclosed air-jacket heating system |
| Brand | Memmert |
|---|---|
| Origin | Germany |
| Manufacturer | Memmert GmbH & Co. KG |
| Model | IPP410ecoplus |
| Cooling Method | Peltier Thermoelectric |
| Temperature Range | 0 °C to 70 °C |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | TTC256 |
| Internal Volume | 256 L |
| Temperature Range | −42 °C to +190 °C |
| Heating Rate (IEC 60068-3-5) | 10 K/min (avg.) |
| Cooling Rate (IEC 60068-3-5) | 6 K/min (avg.) |
| Temp. Uniformity (setpoint-dependent) | ±0.5 K to ±2 K |
| Temp. Stability (setpoint-dependent) | ±0.2 K to ±0.5 K |
| Humidity Range (optional) | 10–98 % RH |
| Humidity Sensor | Capacitive, digital display with auto-diagnosis |
| Humidity Control | Integrated steam humidification & refrigeration-based dehumidification |
| Water Supply | Dual 10 L distilled water tanks with auto-switching |
| Dimensions (W×H×D, mm) | 898 × 1730 × 1100 (external) |
| Construction | Stainless steel interior |
| Accessories | Lockable castors, 80 mm right-side access port with plug, Pt100 Class A 4-wire temperature sensor, dual-stage overtemperature protection (electronic + mechanical), audible/visual alarms for door open, temp. deviation, empty water tank, and sensor fault |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | VO200 |
| Instrument Type | Vacuum Oven |
| Temperature Range | +20 °C to +200 °C |
| Temperature Uniformity (at 160 °C / 50 mbar) | ≤ ±5 °C (on shelf surface) |
| Temperature Stability | ±0.3 °C (per DIN 12880) |
| Chamber Volume | ~29 L |
| Internal Dimensions (W×H×D) | 385 × 305 × 205 mm |
| External Dimensions (W×H×D) | 550 × 600 × 400 mm |
| Shelf Capacity | Up to 3 stainless steel shelves |
| Shelf Spacing | 75 mm |
| Max Load per Shelf | 20 kg |
| Max Total Load | 40 kg |
| Chamber Material | Electropolished AISI 316L stainless steel (EN 1.4404 / ASTM A240) |
| Outer Casing | Textured stainless steel with galvanized steel rear panel |
| Heating System | Direct-backplate MLC (Multi-Level Control) resistive heating elements integrated into each shelf |
| Temperature Sensing | Pt100 Class A, 4-wire, per-shelf independent probes |
| Vacuum Control | Digital electromagnetic valve with programmable setpoint range 5–1100 mbar (display resolution 1 mbar) |
| Gas Inlets | Two digitally controlled, programmable inlets (air + optional process gas) |
| Pressure Regulation | Closed-loop digital pressure control with real-time feedback |
| Safety Systems | Dual independent overtemperature protection (MLOP + mechanical TB), ASF (Automatic Setpoint Linking), microprocessor-based fault diagnostics with audible/visual alarms |
| Programming | Up to 40 temperature–vacuum profiles |
| Compliance | Designed and manufactured in accordance with EN 61010-1, EN 61000-6-3, EN 61000-6-4, and meets essential requirements of EU Machinery Directive 2006/42/EC and EMC Directive 2014/30/EU |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | VO400 |
| Instrument Type | Vacuum Oven |
| Temperature Range | +20 to +200 °C |
| Internal Chamber Dimensions (W×H×D) | 385 × 385 × 330 mm |
| External Dimensions (W×H×D) | 710 × 760 × 550 mm |
| Chamber Material | Electropolished Stainless Steel 1.4404 (ASTM 316L) |
| Heating Method | Internal Radiant Plate Heating with Forced Convection |
| Vacuum Control Range | 5–1100 mbar (digital electromagnetic valve control) |
| Max. Shelf Capacity | 4 adjustable shelves (75 mm spacing) |
| Load per Shelf | 20 kg |
| Total Load Capacity | 60 kg |
| Temperature Uniformity at 160 °C / 50 mbar | ≤ ±5 K (surface) |
| Temperature Stability (DIN 12880) | ≤ ±0.3 K |
| Sensor System | Individual Pt100 Class A (4-wire) per shelf, integrated MLC (Multi-Level Control) architecture |
| Safety Features | Dual independent overtemperature protection (electronic ASF + mechanical TB), door-interlocked rapid venting, leak rate ≤ 0.01 bar/h, residual vacuum ≤ 0.01 mbar |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | VO500 |
| Instrument Type | Vacuum Oven |
| Temperature Range | Ambient + 5 °C to 200 °C |
| Temperature Uniformity (at 160 °C / 50 mbar) | ≤ ±5 °C (surface) |
| Temperature Stability | ±0.3 °C |
| Chamber Dimensions (W×H×D) | 545 × 465 × 400 mm |
| External Dimensions (W×H×D) | 710 × 760 × 550 mm |
| Chamber Volume | ~101 L |
| Interior Material | Electropolished Stainless Steel 1.4404 (ASTM 316L) |
| Exterior Material | Textured Stainless Steel with Galvanized Steel Back Panel |
| Heating Method | Internal Multi-Level Control (MLC) with Direct-Attached PTC Heating Elements on Perforated Stainless Steel Shelves |
| Shelf Configuration | Up to 4 Adjustable Shelves (95 mm spacing), Load Capacity: 20 kg/shelf (60 kg total) |
| Vacuum Control | Digital Electromagnetic Valve, Adjustable Range: 5–1100 mbar (displayed), Programmable Setpoint from 10–1100 mbar |
| Pressure Accuracy | ±5 mbar |
| Gas Inlets | 2 Independently Controlled (Air & Optional Process Gas), Tubing Material: 1.4571 (ASTM 316Ti) |
| Safety Systems | Dual Pt100 Class A Sensors per Shelf (4-wire), MLOP Multi-Level Overheat Protection, Mechanical Temperature Limiter (TB), Microprocessor-Based Thermal Monitoring with ASF (Automatic Setpoint Linking), Audible/Visual Alarms, Door-Interlocked Rapid Venting, Leak Rate ≤ 0.01 bar/h, Final Vacuum ≤ 0.01 mbar |
| Programming | 40 Programmable Temperature–Vacuum Profiles, Each with Up to 99 Segments |
| Compliance | Designed and tested per DIN 12880, EN 61000-6-3, EN 61000-6-4, IEC 61010-1, and compatible with GLP/GMP documentation requirements including audit-trail-capable operation when used with MEMControl software |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | WNB10 |
| Instrument Type | Water Bath Circulator |
| Circulation | Internal Recirculation |
| Temperature Control | Heating-Only |
| Bath Volume | 10 L |
| Temperature Range | 10–95 °C (with dedicated boiling mode at 100 °C) |
| Temperature Stability | ±0.1 °C (typical, under standard lab conditions) |
| Temperature Resolution | 0.1 °C |
| Time Setting Range | B-type controller: 1 min – 99 h 59 min |
| E-type controller | 1 min – 999 h |
| Overtemperature Protection | Dual (B-type) or Triple (E-type), including electronic and mechanical safety cutoffs |
| Construction | AISI 304 stainless steel bath and housing |
| Compliance | CE-marked, tested to IEC 61010-1 for laboratory equipment safety |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | WNB14 |
| Instrument Type | Water/Oil Bath Circulator |
| Circulation | Internal Recirculation |
| Temperature Control | Heating-Only |
| Bath Volume | 14 L |
| Temperature Range | 10 °C to 95 °C (min. setpoint ≥5 °C above ambient) |
| Boiling Mode | 100 °C |
| Temperature Stability | ±0.1 °C (typical, at 37 °C, no load) |
| Temperature Resolution | 0.1 °C |
| Timer Range | B-type: 1 min–99 h 59 min |
| E-type | 1 min–999 h |
| Timer Accuracy | ±1 min |
| Overtemperature Protection | Triple-stage (E-type) / Dual-stage (B-type) |
| Construction | Stainless Steel AISI 304 Bath & Housing |
| Certifications | CE, EN 61000-6-3, EN 61000-6-2, IEC 61010-1 |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | WNB22 |
| Instrument Type | Circulating Water Bath |
| Internal Volume | 22 L |
| Temperature Range | 10 °C to 95 °C (with optional boiling mode at 100 °C) |
| Temperature Stability | ±0.1 °C (typical, at 37 °C, load-free) |
| Temperature Resolution & Setpoint Accuracy | 0.1 °C |
| Control System | PID with self-diagnostic function |
| Sensor | Dual 4-wire Pt100 (E-type), single 4-wire Pt100 (B-type) |
| Overtemperature Protection | Triple-stage (E-type) / Dual-stage (B-type) |
| Timer Range | B-type: 1 min – 99 h 59 min |
| E-type | 1 min – 999 h |
| Power Rating | 2000 W |
| Construction | Stainless steel inner bath and outer housing (AISI 304) |
| Certifications | CE, tested to IEC 61010-1 for laboratory safety |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | WNB29 |
| Instrument Type | Immersion Circulating Water Bath |
| Circulation | Internal Recirculation |
| Temperature Control | Heating-Only |
| Bath Volume | 29 L |
| Temperature Range | 10 °C to 95 °C (min. setpoint ≥5 °C above ambient) |
| Boiling Mode | 100 °C |
| Temperature Stability | ±0.1 °C (typical, at 37 °C, load-free) |
| Temperature Resolution & Setpoint Accuracy | 0.1 °C |
| Timer Range | B-type: 1 min – 99 h 59 min |
| E-type | 1 min – 999 h |
| Overtemperature Protection | Triple-stage (E-type) / Dual-stage (B-type) |
| Construction | AISI 304 Stainless Steel Inner Bath & Housing |
| Certifications | CE, EN 61010-1, IEC 61000-6-3 |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | WNB45 |
| Instrument Type | Immersion Circulating Water Bath |
| Circulation | Internal Recirculation |
| Temperature Control | Heating-Only |
| Bath Volume | 45 L |
| Temperature Range | 10 °C to 95 °C (min. setpoint ≥5 °C above ambient) |
| Boil Mode | 100 °C |
| Temperature Stability | ±0.1 °C (typical at 37 °C, load-dependent) |
| Temperature Resolution & Setpoint Accuracy | 0.1 °C |
| Timer Range | B-Type: 1 min – 99 h 59 min |
| E-Type | 1 min – 999 h |
| Overtemperature Protection | Triple-stage (E-Type) / Dual-stage (B-Type) |
| Construction | Stainless Steel 1.4301 (AISI 304) Inner Bath & Outer Casing |
| Certifications | CE, EN 61000-6-3, EN 61000-6-2, IEC 61010-1 |
| Brand | MEMMERT |
|---|---|
| Origin | Germany |
| Model | WNB7 |
| Temperature Range | 10–95 °C (with dedicated boiling mode at 100 °C) |
| Display & Setpoint Resolution | 0.1 °C |
| Heating Power | 1200 W |
| Bath Capacity | 7 L |
| Internal Dimensions (L×W×H) | 240 × 210 × 140 mm |
| External Dimensions (with flat lid) | 468 × 356 × 238 mm |
| External Dimensions (with gabled lid) | 468 × 356 × 337 mm |
| Construction | Stainless steel inner bath and outer housing |
| Safety Certifications | CE-compliant, tested to EN 61010-1 and EN 61326-1 |
| Overtemperature Protection | Dual (B-type) or Triple (E-type) independent safety circuits |
| Timer Range | B-type: 1 min – 99 h 59 min |
| E-type | 1 min – 999 h |
| Temperature Sensor | Four-wire Pt100 (1 sensor standard on B-type |
| Optional Accessories | Flat/gabled lids, orbital shaker module, conical flask holders (100–500 mL), tube racks (14.5–32 mm diameter), liquid-level controller, adjustable-height stands |