MicCRA
Filter
Showing all 11 results
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 50 × 245 mm |
| Processing Volume | 0.1–500 mL |
| Speed Range | 3,000–30,000 rpm |
| Input Power | 145 W |
| Output Power | 95 W |
| Weight | 900 g |
| Protection Rating | IP20 / Class II |
| Speed Control | Electronic, Stepless, and Stability-Regulated |
| Brand | MicCRA |
|---|---|
| Origin | Germany |
| Model | D-27 |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (H×W×D) | 120 × 275 × 220 mm |
| Processing Volume Range | 0.1 mL to 50 L |
| Motor | 3-Phase Asynchronous, 2.7 kW |
| Max Speed | 36,000 rpm |
| Noise Level | 63 dB(A) |
| IP Rating | IP54 (Motor Unit), IP20 (HFU-27 Inverter) |
| Cooling | Integrated Circulating Water Cooling |
| Sealing | Pneumatic Air-Seal System with Lifetime Grease Lubrication |
| Drive Duty Cycle | S1 (Continuous Operation) |
| Inverter Output | 3×0–220 V AC, 3.8 kVA, 50–400 Hz (up to 600 Hz) |
| USB Interface | Yes |
| Weight | 9.5 kg (Motor Unit), 4.9 kg (HFU-27 Inverter) |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | D-9 |
| Instrument Type | Probe-type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 92 × 183 × 177 mm |
| Processing Volume | 0.1–20,000 mL (H₂O) |
| Speed Range | 3,000–25,000 rpm |
| Motor | Brushless DC (BLDC) |
| Input/Output Power | 950 W / 760 W |
| Speed Display | LED TFT |
| Speed Control | PID-regulated |
| Speed Accuracy | ±100 rpm |
| Housing Material | Anodized Hard-Aluminum Alloy |
| Noise Level | ≤55 dB(A) |
| Protection Rating | IP20 |
| Overload & Thermal Protection | Yes |
| Soft Start/Stop | Yes |
| Continuous Duty Cycle | 100% |
| Power Supply | 230 V, 50/60 Hz |
| Operating Ambient Temperature | 5–45 °C |
| Relative Humidity Limit | ≤85% RH |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | DFK |
| Type | Inline Circulation Homogenization Chamber |
| Compatible Hosts | MICCRA D-9, D-15, D-27 |
| Rotor/ Stator Configurations | DFK 1.0 (20/30 mm), DFK 1.4 (20/30/40 mm) |
| Max Flow Rate (Water) | 10–45 mL/min |
| Max Shear Velocity | 30–46 m/s |
| Max Operating Pressure | 8–16 bar |
| Vacuum Capability | ≤1 mbar |
| Seal Options | FDA-compliant lip seal or mechanical seal |
| CIP/SIP Ready | Yes |
| Material | Electropolished AISI 316L stainless steel |
| Hardness (Rotor/Stator) | ≤6 Mohs |
| Surface Finish | Ra ≤0.4 µm |
| Brand | MicCRA |
|---|---|
| Origin | Germany |
| Model | DS Series (Stator Diameter: 5–14 mm) |
| Probe Types | DS-5 / PEDS-8 / PDS-14 |
| Stator Outer Diameter | 5 mm / 8 mm / 14 mm |
| Rotor Outer Diameter | 3.6 mm / 5.6 mm / 10.6 mm |
| Max Tip Speed | 7.3 m/s / 11.4 m/s / 21.6 m/s |
| Probe Length | 115 mm / 155 mm / 200 mm |
| Minimum Immersion Depth | 30 mm (DS-5), 80 mm (PEDS-8), 125 mm (PDS-14) |
| Recommended Sample Volume (Water) | 0.1–20 mL / 1–100 mL / 10–500 mL |
| Rotor Type | Shearing Rotor |
| Stator Type | Toothed (Peg-Type) Stator |
| Application Domain | Microscale Biological Homogenization |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | D-4 / D-4P / D-4P Mul |
| Type | Probe-type Rotational Homogenizer |
| Dimensions (W×D×H) | 80 × 175 × 230 mm |
| Weight | 3 kg |
| Max. Sample Volume (H₂O) | 2 L (D-4), 5 L (D-4P & D-4P Mul) |
| Max. Viscosity | 8,000 mPa·s |
| Motor | Brushless DC |
| Input/Output Power | 450 / 360 W |
| Speed Range | 3,000–25,000 rpm (D-4), 1,500–15,000 rpm (D-4P/D-4P Mul) |
| Speed Setting Resolution | ±100 rpm |
| Timing Range | 0–999 h 59 min 59 sec |
| Programmable Steps | 6-segment (speed + time per step) |
| Temperature Monitoring | Yes (external probe optional), ±0.5 °C accuracy |
| Screen | 3.5″ TFT capacitive touchscreen |
| IP Rating | IP42 |
| Power Supply | 230 V AC, 50/60 Hz |
| Continuous Duty Cycle | 100% |
| Safety Features | Overload & thermal protection, soft start/stop, screen lock, max. temperature cutoff |
| Connectivity | Integrated Wi-Fi for remote monitoring and control via mobile device |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | DS-40 (Stator Outer Diameter: 40 mm) |
| Rotor Outer Diameter | 31 mm |
| Maximum Tip Speed | 54.5 m/s |
| Total Length | 250 mm |
| Minimum Immersion Depth | 200 mm (standard) / 40 mm (with extension sleeve) |
| Recommended Volume Range (Water) | 1,000–20,000 mL |
| Rotor-Stator Configuration | Dual-stage shear-mixing design with interchangeable coarse/fine stators |
| Compatibility | PGDS-40, PFDS-40, PFSMIRSMIREMR variants |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | DS-20 (Stator Outer Diameter: 20 mm) |
| Rotor Outer Diameter | 15 mm |
| Maximum Tip Speed | 30.6 m/s |
| Probe Length | 250 mm |
| Minimum Immersion Depth | 200 mm / 40 mm (depending on configuration) |
| Recommended Sample Volume (Water) | 20–5,000 mL |
| Rotor-Stator Configuration | Shear-Mixing, Emulsification, or Multi-Function |
| Stator Types | Coarse, Fine, Fine-Pin, and Micro-Structured |
| Rotor Types | Shear-Mixing, Emulsification, or Dual-Function |
| Compatibility | Paste, Fibrous, and Liquid Matrices |
| Modular Quick-Change System | Yes |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | DS-30 (Stator Outer Diameter: 30 mm) |
| Rotor Outer Diameter | 23 mm |
| Maximum Tip Speed | 47 m/s |
| Standard Head Length | 250 mm |
| Minimum Immersion Depth | 200 mm (standard) / 40 mm (with extension sleeve) |
| Recommended Processing Volume (Water) | 500–10,000 mL |
| Material | Electropolished ASTM F138-certified AISI 316L Stainless Steel |
| Compatible Shaft Extensions | XL (327 mm), XLL (420 mm) |
| Rotor-Stator Configurations | Multi-purpose (PFDS-30), Emulsifying (PGDS-30), Fine-cutting Fibrous (PFDS-30/ZK), Microfine (SMIR/SMIRE/MIRE/MIR) |
| Brand | MicCRA |
|---|---|
| Origin | Germany |
| Model | DS-20/2P SMIR & DS-30/2P SMIR |
| Probe Type | Multi-Application Rotor-Stator Homogenizer Head |
| Stator Configuration | One Fine + One Coarse Stator per Kit |
| Rotor Type | Shear-Mixing Rotor |
| Stator Outer Diameter | 20 mm / 30 mm |
| Rotor Outer Diameter | 15 mm / 23 mm |
| Max Tip Speed | 30.6 m/s / 47 m/s |
| Probe Length | 250 mm |
| Minimum Immersion Depth | 200 mm (operational) / 40 mm (shaft-only clearance) |
| Recommended Sample Volume (Water) | DS-20/2P — 100–3,000 mL (coarse), 250–8,000 mL (fine) |
| Brand | MICCRA |
|---|---|
| Origin | Germany |
| Model | RW-30/P, RW-40/P, RW-70/3S |
| Stator Outer Diameter | 30 mm / 40 mm / 70 mm |
| Rotor Outer Diameter | 15 mm / 23 mm / 33 mm |
| Max Tip Speed | 30.6 m/s / 41 m/s / 58 m/s |
| Rotor Length | 250 mm / 250 mm / 420 mm |
| Minimum Immersion Depth | 200 mm (±40 mm) / 200 mm (±40 mm) / 300 mm (±100 mm) |
| Processing Volume (Water) | 1–20 L / 5–50 L / 10–100 L |
| Rotor Type | Shear-Mixing / Shear-Mixing / Turbine-Propeller |
| Stator Type | Coarse Mesh / Coarse Mesh / Fine Mesh |