Moglabs
Filter
Showing all 4 results
| Brand | Moglabs |
|---|---|
| Model | BOSA 400 |
| Wavelength Range | 1265–1345 nm, 1525–1565 nm, 1525–1615 nm |
| Optical Resolution | 10 MHz @ 1550 nm / 10 MHz @ 1310 nm |
| Wavelength Accuracy | ±0.5 pm (C/L-band), ±1.0 pm (O-band) |
| Spurious-Free Dynamic Range | >80 dB |
| Input Power Range | –70 to +13 dBm |
| Max Safe Total Input Power | +20 dBm |
| Sensitivity | –70 dBm / 10 MHz |
| Power Accuracy | ±0.5 dB |
| Polarization Capability | Dual orthogonal polarization channels |
| Scan Speed | 20 nm/s |
| Wavelength Calibration | Built-in atomic frequency reference |
| Optional Modules | Option 10 (1 MHz tunable laser), Option 20 (device characterization: IL/RL), Option 30 (polarization-resolved spectroscopy), Option 40 (phase-resolved spectral analysis) |
| Brand | Moglabs |
|---|---|
| Model | CEL Series |
| Type | External-Cavity Diode Laser (ECDL) |
| Wavelength Range | 450–530 nm & 630–1620 nm |
| Output Power | Up to 250 mW (LD-dependent) |
| Linewidth | <100 kHz (typical), down to 20 kHz (configuration-dependent) |
| Tuning Range | >20 GHz mode-hop-free scan (with MOGLabs controller) |
| Beam Diameter (1/e²) | ~0.6 mm × 0.3 mm |
| Polarization | >100:1 vertical linear |
| Modulation Bandwidth | 20 MHz (AC/DC-coupled, 20 ns delay optional) |
| RF Modulation | >2.5 GHz bandwidth via bias-tee |
| Piezo Feedback | High-bandwidth PZT actuation with user-replaceable Cateye module |
| Thermal Control | TEC (±14.5 V / 3.3 A |
| Cooling | Air-cooled standard |
| Compliance | Designed for GLP/GMP-aligned lab environments |
| Brand | Moglabs |
|---|---|
| Model | MENHIR-1550 |
| Wavelength | 1560 ± 10 nm |
| Repetition Rate | Up to 2.5 GHz (standard options: 250/500 MHz, 1/1.25/2/2.5 GHz |
| Pulse Width | ≤200 fs (transform-limited) |
| Average Power | ≥50 mW (up to 2 W with optional variant) |
| Pulse Energy | ≥0.05 nJ (up to 1 nJ) |
| Spectral Bandwidth | ≥12.5 nm (3 dB) |
| Beam Quality | TEM₀₀, M² ≤ 1.05 |
| Polarization | Linear (PER ≥ 23 dB) |
| Amplitude Noise | ≤0.1% RMS (24 h) |
| Timing Jitter | ≤30 fs (1 kHz – 10 MHz) |
| Cooling | Passive air conduction |
| Warm-up Time | ≤10 s (cold start) |
| Dimensions | 240 × 160 × 89 mm |
| Weight | 5 kg |
| Power Supply | DC 5 V / 2 A or DC 24 V / 2 A |
| Max. Power Consumption | ≤10 W (standard), ≤50 W (high-power option) |
| Output | Polarization-maintaining fiber (FC/APC) or free-space collimated beam |
| Brand | Moglabs |
|---|---|
| Origin | Australia |
| Model | MSA Series ECDL-Based MOPA Laser |
| Wavelength Range | 630–1064 nm |
| Output Power | Up to 4 W (wavelength-dependent) |
| Linewidth | <100 kHz |
| ASE Suppression | >45 dB |
| Small-Signal Gain | Up to 23 dB |
| Seed Input Requirement | 10–30 mW |
| Gain Bandwidth | 10–30 nm (wavelength-dependent) |
| Polarization Extinction Ratio | >20 dB |
| Beam Collimation | Integrated, Linearly Aligned Coupling Lenses |
| Amplifier Module Replaceability | User-Serviceable TA Diode Cartridge |
| Optional Configurations | Dual-Stage Isolator (5 mm aperture), Single-Mode Fiber Coupling, Frequency Stabilization Kit, Power Stabilization Module, Astigmatism-Corrected Output, Dual-Beam (Free-Space + Fiber) |