Netzsch
Filter
Showing 31–60 of 84 results
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | KBT Cable Fire Testing System |
| Standards Compliance | EN 50399, IEC 60332-3, GB/T 31248, GB/T 18380.31, IEC 60332-3-10 |
| Chamber Dimensions (W × D × H) | 135 × 235 × 430 cm |
| Exhaust Opening (W × D) | 100 × 30 cm |
| Fume Hood Dimensions (H × W × D) | 100 × 150 × 100 cm |
| Temperature Measurement Range | −100 to 1300 °C, Resolution: 0.1 K |
| Mass Flow Controller Range | 0–1 L/min, Accuracy: ±0.3 L/min |
| Paramagnetic O₂ Analyzer | 16–21 % (v/v), Max. Resolution: 0.001 % |
| NDIR CO₂ Analyzer | 0–10 % (v/v) |
| Peltier Condenser | Min. Temp. −10 °C, Dryer-Free Operation |
| Gas Sampling Probes | High-Precision Bidirectional |
| Control System | Siemens Gas Analyzers with Auto-Calibration & Dual-Direction Data Exchange |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | Kinexus DSR |
| Instrument Type | Rotational Rheometer |
| Motor Bearing | Air Bearing |
| Minimum Angular Velocity | 10 nrad/s |
| Maximum Angular Velocity | 325 rad/s |
| Frequency Range | 1 µHz – 100 Hz |
| Maximum Torque | 200 mNm |
| Torque Resolution | 0.1 nNm |
| Normal Force Range | 0.001 N – 50 N |
| Normal Force Response Time | <10 ms |
| Vertical Travel Speed | 0.1 µm/s – 35 mm/s |
| Vertical Travel Distance | 230 mm |
| Gap Resolution | 0.1 µm |
| Motor Inertia | 12 µN·m·s² |
| Torque Range (Rate/Stress Control) | 0.01 µNm – 200 mNm |
| Torque Range (Strain/Stress Control) | 0.05 µNm – 200 mNm |
| Fixture Identification | RFID-enabled Smart Recognition |
| Environmental Control Unit | Plug-and-Play with Auto-Detection |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | Kinexus DSR-III |
| Instrument Type | Rotational Rheometer |
| Motor Bearing | Air Bearing |
| Minimum Angular Velocity | 10 nrad/s |
| Maximum Angular Velocity | 200 rad/s |
| Frequency Range | 1 µHz – 100 Hz |
| Maximum Torque | 150 mNm |
| Torque Resolution | 0.1 nNm |
| Normal Force Range | 0.01 N – 20 N |
| Normal Force Response Time | <10 ms |
| Vertical Travel Speed | 0.1 µm/s – 20 mm/s |
| Vertical Travel Distance | 230 mm |
| Gap Resolution | 0.1 µm |
| Motor Inertia | 12 µN·m·s² |
| Torque Range (Rate/Stress Control) | 0.1 µNm – 150 mNm |
| Torque Range (Strain/Stress Control) | 0.1 µNm – 150 mNm |
| Fixture Identification | RFID-enabled Smart Recognition |
| Environmental Control Unit | Plug-and-Play with Auto-Detection |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | Kinexus DSR+ |
| Instrument Type | Rotational Rheometer |
| Sample State | Liquid |
| Bearing Type | Air Bearing |
| Minimum Angular Velocity | 1 nrad/s |
| Maximum Angular Velocity | 500 rad/s |
| Frequency Range | 1 µHz – 150 Hz |
| Maximum Torque | 225 mNm |
| Torque Resolution | 0.1 nNm |
| Normal Force Range | 0.001 N – 50 N |
| Normal Force Response Time | <10 ms |
| Vertical Travel Speed | 0.1 µm/s – 35 mm/s |
| Vertical Travel Distance | 230 mm |
| Gap Resolution | 0.1 µm |
| Motor Inertia | 12 µN·m·s² |
| Control Modes | Rate, Stress, Strain |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | Kinexus lab+ |
| Instrument Type | Rotational Rheometer |
| Sample State | Liquid |
| Bearing Type | Air Bearing |
| Minimum Angular Velocity | 10 nrad/s |
| Maximum Angular Velocity | 325 rad/s |
| Frequency Range | 1 µHz – 150 Hz |
| Maximum Torque | 200 mNm |
| Torque Resolution | 0.1 nNm |
| Normal Force Range | 0.001 N – 50 N |
| Normal Force Response Time | 10 ms |
| Vertical Travel Speed | 0.1 µm/s – 35 mm/s |
| Vertical Travel Distance | 230 mm |
| Gap Resolution | 0.1 µm |
| Motor Inertia | 12 µN·m·s² |
| Torque Range (Steady-State) | 0.01 µNm – 200 mNm |
| Torque Range (Oscillatory) | 0.005 µNm – 200 mNm |
| Fixture Identification | RFID-enabled Smart Recognition |
| Environmental Control Unit | Plug-and-Play with Auto-Detection |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | Kinexus Prime Ultra+ |
| Instrument Type | Rotational Rheometer |
| Frequency Range | 1 µHz to 150 Hz |
| Temperature Control | Modular EasySwap™ Environmental Units |
| Normal Force Control | High-Sensitivity Electromagnetic Sensor |
| Vertical Travel & Gap Control | Precision Motorized Actuation |
| Compliance | ASTM D3835, ISO 6721-10, ISO 3219, USP <911>, FDA 21 CFR Part 11 (Software Mode), GLP/GMP Audit Trail Capable |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | Kinexus pro+ |
| Instrument Type | Rotational Rheometer |
| Motor Bearing | Air Bearing |
| Minimum Angular Velocity | 1 nrad/s |
| Maximum Angular Velocity | 500 rad/s |
| Frequency Range | 1 µHz – 150 Hz |
| Maximum Torque | 225 mNm |
| Torque Resolution | 0.1 nNm |
| Normal Force Range | 0.001 N – 50 N |
| Normal Force Response Time | <10 ms |
| Vertical Travel Speed | 0.1 µm/s – 35 mm/s |
| Vertical Travel Distance | 230 mm |
| Gap Resolution | 0.1 µm |
| Motor Inertia | 12 µN·m·s² |
| Torque Range (Steady-State) | 0.005 µNm – 225 mNm |
| Torque Range (Oscillatory) | 0.001 µNm – 225 mNm |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | Kinexus Rosand RH10 |
| Instrument Type | Capillary Rheometer |
| Sample State | Liquid |
| Minimum Extrusion Speed | 5 µm/min |
| Maximum Extrusion Speed | 1200 mm/min |
| Maximum Load | 100 kN |
| Die Diameter Range | 0.5–3 mm |
| Barrel Diameter (Standard) | 15 mm (Optional: 9.5, 12, 19, 24 mm) |
| Barrel Material | Nitrided Steel (Optional: Stainless Steel or Hastelloy) |
| Die Material | Tungsten Carbide |
| Speed Dynamic Range | 240,000:1 |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | Kinexus Rosand RH2000 |
| Instrument Type | Capillary Rheometer |
| Sample State | Liquid |
| Minimum Piston Speed | 10 µm/min |
| Maximum Piston Speed | 1200 mm/min |
| Maximum Load | 20 kN |
| Die Diameter Range | 0.5–3 mm |
| Barrel Diameter | 15 mm (standard), optional 9.5 / 12 / 19 / 24 mm |
| Barrel Material | Nitrided Steel (optional stainless steel or Hastelloy) |
| Die Material | Tungsten Carbide |
| Speed Dynamic Range | 240,000:1 |
| Compliance | ASTM D3835, ISO 11443, ISO 6721-6, USP <911> |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Category | Imported Instrument |
| Model | Kinexus Rosand RH7 |
| Instrument Type | Capillary Rheometer |
| Minimum Extrusion Speed | 2.5 µm/min |
| Maximum Extrusion Speed | 600 mm/min |
| Maximum Load Capacity | 50 kN |
| Speed Dynamic Range | 240,000:1 |
| Standard Barrel Diameter | 15 mm (optional: 9.5, 12, 19, 24 mm) |
| Barrel Material | Nitrided Steel (optional: Stainless Steel or Hastelloy) |
| Die Material | Tungsten Carbide |
| Die Diameter Range | 0.5–3 mm |
| Optional Accessories | Nitrogen Purge System, Melt Strength Tester, Melt Draw-Down Fixture, Laser-Based Die Swell Measurement, Slit Dies, PVT Measurement Dies, Melt Cut-Off Knife |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | LFA 427 |
| Measurement Principle | Laser Flash Method (LFM) |
| Temperature Range | –120 °C to 2800 °C (depending on furnace configuration) |
| Laser Source | Nd:Glass, energy-adjustable pulse |
| Thermal Conductivity Range | 0.1–2000 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±2% |
| Vacuum Level | ≤10⁻⁵ mbar |
| Sample Dimensions | Square: 8×8 mm, 10×10 mm |
| Circular | Ø6, Ø10, Ø12.7, Ø20 mm |
| Thickness | 0.1–6 mm |
| Sample Types | Solids, powders, thin films, liquids (with specialized holders) |
| Furnace Options | Dual-furnace capability |
| Pulse Control | Software-adjustable pulse width |
| Key Technology | PulseMapping™ |
| Atmosphere Control | Vacuum, inert (Ar, N₂), or reactive gases (e.g., O₂, CO₂) |
| Sample Holders | Graphite, alumina, silicon carbide |
| Dimensions (L×W×H) | 800 mm × 800 mm × 1900 mm |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | LFA 467 HyperFlash HT |
| Measurement Principle | Laser Flash Method (LFA) |
| Temperature Range | RT to 1250 °C |
| Thermal Conductivity Range | 0.1 – 4000 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±2% |
| Pulse Source | Adjustable-energy xenon lamp, pulse width <2 µs |
| Detection Rate | up to 2 MHz |
| Sample Forms | Solid, liquid, powder, thin film |
| Atmosphere Options | Inert or oxidative (vacuum-tight chamber) |
| Dimensions (L×W×H) | 600 mm × 500 mm × 600 mm |
| Sample Capacity | Up to 4 positions with independent thermocouples |
| Compliance | ASTM E1461, ASTM E2585, ISO 22007-4, ISO 18755, ISO 13826, DIN EN 821-2, DIN 30905, DIN EN 1159-2 |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | LFA 717 HyperFlash |
| Measurement Principle | Laser Flash Method (LFA) |
| Temperature Range | -100 °C to 500 °C |
| Thermal Conductivity Range | 0.1 – 4000 W/(m·K) |
| Accuracy | ±3% |
| Repeatability | ±2% |
| Sample Forms | Solid, Liquid, Powder, Thin Film |
| Atmosphere Options | Inert or Oxidizing |
| Sample Capacity | Up to 16 positions with automated carousel |
| Dimensions (L×W×H) | 600 mm × 500 mm × 600 mm |
| Data Acquisition Rate | 2 MHz |
| Compliance Standards | ASTM E1461, ASTM E2585, ISO 22007-4, ISO 18755, ISO 13826, DIN EN 821-2, DIN 30905, DIN EN 1159-2 |
| Brand | NETZSCH |
|---|---|
| Origin | Germany |
| Model | LOI Oxygen Index Analyzer |
| Compliance | ISO 4589-2, DIN 22117, ASTM D2863 |
| Dimensions (W × D × H) | 360 × 360 × 630 mm |
| Glass Column Dimensions (Ø × H) | 75 × 450 mm |
| Test Accuracy | ±0.1% O₂ |
| Weight | 8.2 kg |
| Oxygen Sensor Type | Paramagnetic |
| Display | Color High-Resolution Touchscreen |
| Sample Holders | Supported & Unsupported Configurations |
| Data Interface | USB & Ethernet |
| Automation | Fully Automated Calibration & Test Sequence |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | MMC274 Nexus |
| Instrument Type | Accelerating Rate Calorimeter (ARC) |
| Measurement Mode | Adiabatic Calorimetry |
| Temperature Range | RT to 500°C |
| Temperature Resolution | 0.01°C |
| Pressure Range | 0–100 bar |
| Heating Rate | 0–2°C/min |
| Tracking Rate | 0–50°C/min (standard) or 0–250°C/min (high-speed module) |
| Temperature Control Accuracy | ±0.01°C |
| Pressure Accuracy | ±0.01 bar |
| Sample Volume | 0.1–2.5 mL |
| Heat Flow Sensitivity | 25–250 µW/g (mode-dependent) |
| Scan Sensitivity | 0.002°C/min |
| Sample Types | Solids, Liquids, Powders |
| Optional | Custom sample vessels, button-cell test fixture, VariPhi™ thermal compensation technology |
| Brand | NETZSCH |
|---|---|
| Origin | Germany |
| Model | NanoTR |
| Measurement Principle | Laser-based Thermal Reflectance (Time-Domain Thermoreflectance, TDTR) |
| Instrument Type | Thin-Film Thermal Conductivity Analyzer |
| Temperature Range | Ambient (RT) to 300 °C (optional heating stage) |
| Sample Dimensions | 10 × 10 mm to 20 × 20 mm |
| Film Thickness Range | 30 nm to 20 µm (dependent on material and measurement mode) |
| Thermal Diffusivity Range | 0.01 to 1000 mm²/s |
| Thermal Conductivity Range | 0.1 to 2000 W/(m·K) |
| Accuracy | ±5% |
| Repeatability | ±5% |
| Pulse Width | 1 ns |
| Probe Beam Diameter | 100 µm |
| Pump Laser Power | 100 mW |
| Measurement Modes | RF (Rear-Heating/Forward-Detection) and FF (Front-Heating/Forward-Detection) |
| Footprint (L×W×H) | 600 mm × 500 mm × 700 mm |
| Compliance | ISO 13826, ASTM E1461 (adapted for thin-film extension), NIST-traceable calibration protocols |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | PicoTR |
| Measurement Principle | Time-Domain Thermoreflectance (TDTR) |
| Instrument Type | Thin-film thermal property analyzer |
| Dimensions (L×W×H) | 600 mm × 500 mm × 700 mm |
| Accuracy | ±5% |
| Thermal Conductivity Range | 0.1 – 2000 W/(m·K) |
| Repeatability | ±5% |
| Temperature Range | Ambient (RT) to 500 °C (optional stage) |
| Measurement Modes | RF (rear-heating/front-detection) and FF (front-heating/front-detection) |
| Sample Size | 10 mm × 10 mm to 20 mm × 20 mm |
| Film Thickness Range | 10 nm – 900 nm (material- and mode-dependent) |
| Thermal Diffusivity Range | 0.01 – 1000 mm²/s |
| Pump Laser Pulse Width | 0.5 ps |
| Probe Beam Diameter | 45 µm |
| Laser Power | 20 mW |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | RUL/CIC421 |
| Temperature Range | RT to 1600°C (standard), up to 1700°C (optional) |
| Sample Dimensions | Ø50 mm × 50 mm height |
| Deformation Measurement Range | 20 mm |
| Resolution | 5 nm |
| Load Range | 1 N to 1000 N |
| Atmosphere Options | Air or inert/protective gas (model-dependent) |
| Sample Geometry Requirement | Cylindrical specimen with coaxial 12.5 mm central bore |
| Measurement Principle | Differential displacement sensing under controlled load and temperature |
| Brand | NETZSCH |
|---|---|
| Origin | Germany |
| Model | SBI Single Burning Item Test System |
| Compliance | EN 13823, GB/T 20284, GB/T 20248 |
| Sample Configuration | Two perpendicular non-flooring building material specimens mounted on a trolley |
| Ignition Source | Sand-boxed J-type burner |
| Exhaust Duct | Ø(315 ± 5) mm |
| Mass Flow Controller Range | >0–2.1 g/s, accuracy better than ±1.5% of reading |
| Burner Switching Response Time | ≤12 s |
| Oxygen Analyzer | Paramagnetic, 16–21% (v/v), resolution 0.001% |
| CO₂ Analyzer | NDIR, 0–10% (v/v) |
| Smoke Measurement | White-light or laser-based optical density system |
| Cooling | Peltier-cooled gas conditioning unit |
| Data Acquisition | Integrated modular control and acquisition platform |
| Interface | High-resolution color touchscreen HMI |
| Gas Analysis | Siemens OEM analyzer with bidirectional communication and auto-calibration capability |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | SBK Flammability Test Chamber for Toys |
| Compliance | EN 71-2 |
| Sample Dimensions (H × W) | 610 (310) × 100 mm |
| Sample Holder | Adjustable in Horizontal and Vertical Planes |
| Fuel | Propane (≥95% purity) |
| Gas Pressure | 4.0 bar |
| Operating Temperature | +23 ± 5 °C |
| Chamber Dimensions (W × D × H) | 70 × 70 × 121 cm |
| Construction | Corrosion-Resistant Stainless Steel |
| Viewing | Dual Large Fire-Rated Glass Doors |
| Gas Control | Front-Mounted Main Shut-Off Valve and Fine-Tuning Burner Control Valve |
| Pressure Monitoring | Integrated Pressure Gauge Regulator |
| Burner Positioning | Contaminant-Shielded Burner Displacement Mechanism |
| Application Scope | Textiles, Furnishings, Toy Accessories (e.g., Wigs, Facial Hair Simulants, Plush Trim) |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | STA 2500 Regulus |
| Heating Rate | 0–100 °C/min |
| Temperature Range | RT to 1100 °C (standard furnace) / RT to 1600 °C (high-temperature furnace) |
| Temperature Stability | ±0.3 K |
| Maximum Sample Mass | 250 mg |
| Atmosphere Options | Oxidizing, Reducing, Inert, Vacuum (dynamic or static) |
| Gas Control | Integrated Mass Flow Controllers (MFCs), software-regulated |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | STA 449 F3 Jupiter |
| Temperature Range | −150 to 2400 °C |
| Heating Rate | 0–50 °C/min (standard) |
| Temperature Stability | ±0.3 K |
| Maximum Sample Mass | 35 g |
| Balance Resolution | 0.1 µg |
| Vacuum Level | 10⁻⁴ mbar |
| Atmosphere Options | Oxidizing, Reducing, Inert, Vacuum |
| Optional Modules | TMDSC, Tau-R® Cp Calibration, BeFlat® Baseline Optimization, ASC Auto-sampler (20 positions), Coupling to FTIR/MS/GC-MS, Steam Furnace, Corrosive Gas Kit |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | STA 509 Jupiter Classic |
| Temperature Range | RT to 1600 °C |
| Heating Rate | 0.001–50 °C/min |
| Max Sample Mass | 35 g |
| Atmosphere Options | Inert, Oxidizing, Static, Dynamic, Vacuum, Corrosive (optional) |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | STA 509 Jupiter Supreme |
| Temperature Range | –150 °C to 2000 °C |
| Maximum Sample Mass | 5 g |
| Atmosphere Options | Inert, Oxidizing, Static, Dynamic, Vacuum, Corrosive (optional) |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | STA-GC-MS |
| Operating Temperature Range | RT to 350 °C |
| Coupling Interface | Heated Transfer Line (up to 350 °C) with Six-Port Valve Box |
| Trigger Mode | Event-Driven Synchronization |
| Software | Fully Integrated, Real-Time Hardware Synchronization |
| Standalone Operation | Yes (STA and GC-MS operate independently) |
| Compliance | Designed for GLP/GMP environments |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | STA/TG-FTIR |
| Operating Temperature Range | RT to 350 °C |
| Gas Transfer Path | Heated Entirely (Prevents Condensation) |
| Gas Residence Time | Short |
| Carrier Gas Flow Rate | Low (Minimizes Dilution Effect) |
| Measurement Mode | Synchronized Simultaneous STA–FTIR Acquisition or Independent Operation |
| Software Architecture | Fully Integrated, Core-Embedded Control with Hardware-Automated Triggering |
| Sample Introduction | Top-Loading Vertical TGA Configuration (Ensures Quantitative Evolved Gas Transfer) |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | STA/TG-FTIR-GC-MS |
| Operating Temperature Range | RT to 350 °C |
| Gas Transfer Path | Heated (up to 350 °C) |
| Coupling Architecture | Parallel FTIR and GC-MS interfaces |
| Sample Introduction | Top-loading vertical TGA configuration |
| Trigger Mode | Event-driven hardware synchronization |
| Software | Fully integrated, real-time synchronized control platform |
| Compliance Support | ASTM E1131, ISO 11358, USP <621>, GLP-compliant audit trail capability |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | STA/TG-FTIR-MS |
| Mass Range | 1–300 amu |
| Transfer Line Temperature | RT to 350 °C |
| Gas Path | Heated, Condensation-Free |
| Detection Sensitivity | High |
| Gas Residence Time | Short |
| Carrier Gas Dilution Effect | Minimal |
| FTIR & MS Operation Modes | Simultaneous or Standalone |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | STA/TG-MS |
| Mass Range | 1–300 amu (capillary interface) / 1–1024 amu (SKIMMER® interface) |
| Interface Temperature Range | RT–350 °C (capillary) / RT–2000 °C (SKIMMER®) |
| Sample Introduction | Top-loading vertical TGA configuration |
| Gas Transfer | Heated capillary or SKIMMER® transfer line, fully temperature-controlled |
| Data Synchronization | Hardware-triggered real-time coupling with dual acquisition control |
| Software Architecture | Fully integrated native-core platform with synchronized thermal and MS data acquisition |
| Brand | Netzsch |
|---|---|
| Origin | Germany |
| Model | TAURUS GHP 500 |
| Measurement Principle | Guarded Hot Plate (GHP) |
| Standard Compliance | ISO 8302, ASTM C177, EN 12664, EN 12667, EN 12939, EN 1946-2 |
| Thermal Conductivity Range | 0.005 – 2.0 W/(m·K) |
| Accuracy | ±1.0% |
| Repeatability | ±0.5% |
| Sample Thickness (Single-Sided) | 15 – 200 mm |
| Sample Thickness (Double-Sided) | 2 × 15 – 100 mm |
| Sample Area | 100 × 100 – 300 × 300 mm (optional 500 × 500 mm) |
| Hot Plate Temperature Range | −5 to 70 °C |
| Cold Plate Temperature Range | −15 to 60 °C |
| Enclosure Dimensions (H × W × D) | 186 × 75 × 75 cm |