OEM / Custom Brand Available
Filter
Showing all 14 results
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Compliance Standards | ASTM B117, ISO 9227, GB/T 2423.17–2022, IEC 60068-2-11, MIL-STD-810H (Salt Fog), DIN 50021 |
| Temperature Range | +10°C to +70°C |
| Humidity Range | 30–98% RH |
| Salt Solution Temperature Control | Ambient to +50°C |
| Power Supply | AC 220V ±10% / 380V ±10%, 50 Hz |
| Safety Protections | Over-temperature, leakage current, short-circuit, low-water level, over-current, end-of-test auto-shutdown |
| Sealing Method | Water-seal labyrinth structure |
| [Key | Value] |
|---|---|
| Brand | OEM / Custom Brand Available |
| Origin | Imported (Manufactured Outside China) |
| Manufacturer Type | Authorized Distributor |
| Price Range | USD 2,800–3,200 (FOB) |
| Temperature Range | −70 °C to +150 °C (configurable per model) |
| Humidity Range | 20–98% RH |
| Control Accuracy | ±0.5 °C (temp), ±2.5% RH (humidity) |
| Uniformity | ±1.0 °C (temp), ±3.0% RH (humidity) |
| Ramp Rate | 1–3 °C/min (average air temperature, unloaded) |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,950 (FOB) |
| Temperature Range | −65 °C to +150 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Range | 20–95% RH |
| Humidity Uniformity | ±3.0% RH |
| Humidity Fluctuation | ±1.5% RH |
| Heating Rate (20 °C → 85 °C, no load) | <60 min |
| Cooling Rate (20 °C → −40 °C, no load) | <70 min |
| Power Supply | 3-phase 5-wire AC 380 V, 50 Hz, PE grounded |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Temperature Range | -70°C to +150°C |
| Rapid Cycling Range | -45°C to +85°C |
| Max Linear Ramp Rate | 15°C/min |
| Humidity Range (Optional) | 20–98% RH |
| Temp. Resolution/Accuracy | 0.1°C / ±0.5°C |
| Humidity Resolution/Accuracy | 0.1% RH / ±2.5% RH |
| Uniformity | ±2.0°C / ±3.0% RH |
| Construction | SUS304 Stainless Steel (Matte Finish) |
| Insulation | High-Density Polyurethane Foam with Closed-Cell Structure |
| Refrigeration | Air-Cooled or Water-Cooled Dual-Stage System |
| Compressor | Tecumseh (France) |
| Refrigerant | R-404A / R-501 (EPA-Approved, Non-Ozone-Depleting) |
| Controller | LCD Touchscreen with Multi-Step Programmable Logic |
| Compliance | Meets ASTM D4332, IEC 60068-2-1, IEC 60068-2-2, MIL-STD-810G (Thermal Shock Profile Support) |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,600 (FOB) |
| Compliance | GB 4208 (IPX1–IPX2), GB/T 2423.37–1989, IEC 60529 Equivalent |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C (configurable in four standard grades: A: 0–150 °C |
| B | -20–150 °C |
| C | -40–150 °C |
| D | -70–150 °C) |
| Humidity Range | 20–98 %RH (optional extension to 5–98 %RH or 10–98 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Stability | ±2 °C |
| Humidity Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Heating Rate | ~4.0 °C/min |
| Cooling Rate | ~1.0 °C/min |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 (6 standard models: OK-TH-80 to OK-TH-1000) |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Construction Material | SUS#304 stainless steel interior and exterior |
| Refrigeration System | Hermetic dual-stage compressor with eco-friendly refrigerants (R404A/R23) |
| Controller | Touchscreen LCD with bilingual (English/Chinese) interface |
| Standard Accessories | One Φ50 mm cable port |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire, 2.5 m cable |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB) |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, IEC 60068-2-1, IEC 60068-2-2, GJB 1032A–2012, MIL-STD-2164A |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Operating Ambient | 25°C ±6°C, Unloaded |
| Control Method | PID-Based Balanced Temperature & Humidity Control (BTHC) |
| Refrigerant | R404A (Non-CFC, ODP = 0) |
| Compressor | Tecumseh/Taikang Hermetic Scroll Compressor |
| Noise Level | ≤60 dB(A) |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Chamber Dimensions | Ø350 × 500 mm (cylindrical) |
| Internal Material | SUS304 stainless steel |
| External Material | Powder-coated steel |
| Temperature Range | RT+10°C to 132°C (saturated steam) |
| Humidity Range | 75–100% RH (saturation-controlled) |
| Pressure Range | 0.00–2.90 kg/cm² gauge (max vessel rating: 3.5 kg/cm²) |
| Test Duration | 0–999 hours (programmable) |
| Temperature Uniformity | ±1.0°C |
| Ramp-up Time (RT→132°C) | ≤60 min |
| Pressurization Time (0→2.0 kg/cm²) | ≤50 min |
| Vacuum Preconditioning | Integrated particulate-filtered air purge (<1 µm filtration) |
| Water Autonomy | Up to 200 h per fill (optional fully automated补水 system available) |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported (Global Manufacturing Base) |
| Supplier Type | Authorized Distributor |
| Price Range | USD 3,500–4,200 (FOB) |
| Chamber Construction | AISI 304 Stainless Steel Interior + Powder-Coated Cold-Rolled Steel Exterior |
| Insulation | Rigid Polyurethane Foam + Glass Fiber Composite |
| Viewing Window | Tempered Glass with Sealed Frame |
| Turntable | PVC-Coated Rotating Platform (Chemical-Resistant) |
| Water Contact Materials | 304 SS or Copper-Alloy Fittings |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,500 (FOB) |
| Compliance Standards | MIL-STD-810G Method 506.6, IEC 60529 (IPX1–IPX6), ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8, IEC 60068-2-68, GB/T 4942.1, IEC 60034-5 |
| Chamber Interior Material | SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Turntable Surface | PVC Hard Plate (Chemical-Resistant) |
| Water-Contact Components | 304 Stainless Steel or Brass |
| Drive Mechanism | Stepper Motor-Controlled Oscillating Arm |
| Control System | Optional — Basic Programmable Logic Controller (PLC) or Full-Color Touchscreen HMI (ThermalTech™ Custom Firmware) |
| External Casing | 1.2 mm Cold-Rolled A3 Steel, Powder-Coated Finish |
| Air Blow-Off Function | Integrated Compressed-Air Drying Cycle Post-Test |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 650 (FOB Guangdong) |
| Compliance Standards | ISO 2759, GB/T 6545, ASTM D2210, TAPPI T403, JIS L1004/L1018/L1031, QB/T 1057 |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Internal Chamber Dimensions (W×D×H) | 900 × 600 × 500 mm |
| Test Temperature Range | 35–50 °C (chamber), 47–63 °C (saturated air tank) |
| Control Accuracy | ±0.1 °C (PID digital temperature controller) |
| Spray Nozzle Material | Borosilicate Glass (Pyrex®) |
| Heating System | Titanium-sheathed Infrared Heating Elements with Water-Jacketed Chamber Design |
| Compliance Standards | GB/T 2423.17 (Ka), GB/T 10587, GJB 150.11A, DIN 50021, ASTM B117, ISO 9227 |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Speed Range | 150–300 rpm |
| Speed Resolution | 0.1 rpm |
| Vibration Mode | Reciprocating (Linear) |
| Peak-to-Peak Amplitude | 25.4 mm |
| Load Capacity | 45.4 kg (100 lbs) |
| Effective Table Size | 1.0 m × 1.0 m |
| Timing Range | 1 s to 99 h (or 0.1 s to 300 h) |
| Start Delay Adjustment | 0–15 s |
| Motor Power | 1 HP |
| Speed Control | DC or AC Variable-Frequency Drive |
| Input Voltage | 220 V / 50–60 Hz or 380 V / 50–60 Hz |
| Compliance | ISTA 3A, EN 71-1, ASTM D999 |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,500 (FOB) |
| Compliance Standards | MIL-STD-810G Method 506.6, IEC 60529 (IPX1–IPX6), ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8, IEC 60068-2-68, GB/T 4942.1, IEC 60034-5 |
| Chamber Interior Material | SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Turntable Surface | PVC Hardboard (Corrosion-Resistant) |
| Water Contact Components | 304 Stainless Steel or Brass |
| Water Filtration | Dual-Stage Particulate Filter System |
| Nozzle Type | Adjustable-Angle Precision Spray Nozzles (Non-Diffusing Jet) |
| Water Level Control | Motorized Auto-Adjustable Immersion Height |
| Heating | Electric Immersion Heater with PID Temperature Regulation |
| Pump | High-Pressure Stainless Steel Centrifugal Pump |
| Viewing Window | Tempered Safety Glass with Anti-Fog Coating |
| Control System | Optional — Basic Programmable Logic Controller (PLC) or Full-Color TFT Touch HMI with Data Logging & USB Export |