OEM / Custom Brand
Filter
Showing 31–53 of 53 results
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 % RH |
| Ozone Concentration Range | 50–1500 pphm |
| Temperature Uniformity | ±0.5 °C |
| Sample Rack | 360° continuous rotation at 1 rpm |
| Gas Flow Velocity | 8–16 mm/s |
| Control System | Siemens PLC + Weintek color touchscreen HMI |
| Ozone Generation | Silent discharge tube |
| Ozone Detection | Non-dispersive UV absorption analyzer (≥5-year service life) |
| Compliance Standards | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 11206–2009, ISO 1431-1:2004 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Rapid Temperature Transition Rates | 5–25 °C/min (selectable) |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0% RH (at ≥75% RH) |
| Humidity Stability | ±2.5% RH |
| Internal Dimensions (W×H×D, cm) | 50×75×60 |
| Construction Material | SUS304 Stainless Steel |
| Refrigeration System | Dual-stage cascade refrigeration with HFC-507/R23 eco-friendly refrigerants |
| Control Interface | 7-inch color LCD touch panel, bilingual (English/Chinese) |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Test Port | Ø50 mm on left side wall |
| Compliance Standards | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.3, GJB 150.4, GB/T 10589, GB/T 11158, GB/T 10592 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,600 (FOB) |
| Compliance | IEC 60529, ISO 20653, GB/T 4208, SAE J2527 |
| Chamber Capacity | Standard 1.2 m³ (Customizable) |
| Spray Nozzle Configuration | Adjustable multi-nozzle array (brass & stainless steel) |
| Water Flow Control | Precision solenoid valves with ±2% volumetric repeatability |
| Rotation Table | 360° continuous/intermittent rotation, max load 50 kg, speed 1–6 rpm adjustable |
| Viewing Window | Tempered glass with heated anti-fog coating |
| Casters | Lockable PU swivel casters with stainless steel brackets |
| Drainage System | Sloped stainless steel floor with threaded outlet (DN50) |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,500 (FOB) |
| Compliance | IPX3, IPX4 per IEC 60529, ISO 20653, GB/T 4208, MIL-STD-810G Method 506.6, GJB 150.8, GB/T 2423.38 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,600 (FOB Reference) |
| Compliance | GB/T 2423.38–1995 (Ra2 & Rb2.2), GB 4208–2017 (IPX1–IPX3), IEC 60529 |
| Rainfall Rate | 200–300 mm/h (Ra2) |
| Drip Nozzle Diameter | Ø0.4 mm, Spacing: 20–25 mm |
| Handheld Spray Nozzle | 78° spray angle, 30° tilt from horizontal, Pressure: 80–100 kPa, Flow Rate: 10.0 ± 0.5 L/min |
| Test Duration | 0–999.9 min |
| Chamber Temperature Range | 25 ± 5 °C (ambient), Water Temp ≤ 20 °C |
| Chamber Construction | 304 Stainless Steel + Copper Components |
| Viewing Window | Tempered glass with sealed frame |
| Drainage System | Sloped floor with perimeter gutter and lift cart integration |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Salt Solution Temperature | 35 °C ±1 °C (NSS/ACSS) or 50 °C ±1 °C (CASS) |
| Salt Concentration | 5% NaCl (w/v) or 5% NaCl + 0.26 g/L CuCl₂·2H₂O (CASS) |
| Compressed Air Pressure | 1.00 ±0.01 kgf/cm² |
| Fog Collection Rate | 1.0–2.0 mL/80 cm²/h (measured over ≥16 h, arithmetic mean) |
| pH of Salt Solution | 6.5–7.2 (NSS) or 3.0–3.2 (CASS) |
| Internal Chamber Dimensions (W×D×H) | 90 × 60 × 50 cm |
| External Dimensions (W×D×H) | 141 × 88 × 128 cm |
| Temperature Range | −20 °C to 80 °C |
| Humidity Range | 20–98% RH |
| Temp. Resolution/Uniformity | ±0.1 °C / ±1.0 °C |
| RH Resolution/Uniformity | ±0.1% RH / ±3.0% RH |
| Temp. Control Accuracy/Stability | ±1.0 °C / ±0.5 °C |
| RH Control Accuracy/Stability | ±2.0% RH / ±2.0% RH |
| Pressure Tank Temp. | 47 °C ±1 °C (NSS/ACSS) or 63 °C ±1 °C (CASS) |
| Controller | Full-color LCD touch interface with real-time curve logging |
| Programmable Profiles | 140 patterns, 1400 steps, up to 99 repeats per pattern |
| Step Duration Range | 0–999 h 59 min |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Control Interface | 7-inch LCD with Bilingual (English/Chinese) UI |
| Program Storage | 120 user-defined profiles |
| Max Cycles | 9,999 |
| Max Segment Duration | 999 hrs 59 min |
| Communication | RS-232 with PC software for remote programming, data logging, and real-time monitoring |
| Temperature Transition Mode | Dual-chamber (hot/cold) or single-chamber with air flap switching |
| Recovery Time | ≤5 min (from −40 °C to +150 °C or vice versa) |
| Airflow Actuation | ≤10 s |
| Analog Output | 4–20 mA or 0–10 V DC for external recorder integration |
| Refrigeration | Twin-circuit cascade system with HFC-404A/HFC-134a eco-friendly refrigerant |
| Compressor | Imported semi-hermetic units (Europe/USA) |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Controller Options | TEMI880 Color Touchscreen (EN/CN Switchable) or TEMI300 Membrane Keypad (English Only) |
| Temperature Range | −70 °C to +180 °C (Dual-Zone Independent Control) |
| Humidity Range | 20–98% RH (Optional Humidification) |
| Cooling System | Twin-Stage Cascade Refrigeration with Original Tecumseh (France) Hermetic Compressor |
| Insulation | Polyurethane Rigid Foam (150 mm) + Ultra-Fine Glass Fiber Blanket |
| Interior Material | SUS304 Stainless Steel |
| Exterior Finish | Electrostatic Powder-Coated Cold-Rolled Steel or Optional Brushed SUS304 |
| Airflow | Wide-Band Forced Convection via Centrifugal Blower (Top-Out / Bottom-In) |
| Compliance | Meets ASTM D5229, IEC 60068-2-14, MIL-STD-810H Method 503.7 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | −70°C to +180°C |
| Thermal Transition Time | ≤15 s (50 K transfer between chambers) |
| Control System | TEMI880 Color Touchscreen PLC Controller (EN/CN Switchable) |
| Compliance | IEC 60068-2-14, MIL-STD-810H, JIS Z 8701 |
| Refrigeration | Twin-Circuit Cascade System with Original Tecumseh/Tecumseh-derived Hermetic Compressor |
| Insulation | 120 mm Polyurethane Rigid Foam + 80 mm Ultra-Fine Glass Fiber |
| Airflow | Wide-Band Forced Convection (Top-Out/Bottom-In), ≥3.5 m/s Uniform Velocity |
| Humidity Control | Surface Evaporation Type (Optional), RH 10–98% (at 25–85°C) |
| Power Supply | 380 VAC ±10%, 3-Phase, 50/60 Hz |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | −70°C to +180°C |
| Thermal Transition Time | ≤5 min (typical, 150°C ↔ −40°C) |
| Internal Volume | 150 L (standard configuration) |
| Control System | TEMI880 Color Touchscreen Programmable Controller (EN/CN Switchable) or TEMI300 Membrane Keypad Controller (English Only) |
| Compliance | IEC 60068-2-14, MIL-STD-810H Method 503.5, GB/T 2423.22 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | -40°C to +150°C / -60°C to +150°C / -70°C to +150°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±1.5°C |
| Temperature Deviation | ≤2.0°C |
| Ramp Rate | 3–25°C/min (linear, programmable) |
| Load Capacity | 5–50 kg aluminum mass standard |
| Control System | PID-based BTC (Balance Temperature Control) |
| Refrigeration | Dual-stage mechanical cascade system with R404A/R23 refrigerants |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, IEC 60068-2-1, IEC 60068-2-2, GJB 1032A–2012, MIL-STD-2164A |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Control System | TEMI880 Color Touchscreen Controller (EN/CN Switchable) or TEMI300 Membrane Keypad Controller (English Only) |
| Protection Features | Compressor Overheat/Overcurrent/High-Pressure Protection |
| Standard Configuration | Dual-Layer Tempered Glass Viewing Window |
| Climate Control Method | Balanced Temperature and Humidity Control (BTSC) |
| Operating Ambient | +5°C to +35°C |
| Heating Element | Nickel-Chromium Alloy Wire Heater |
| Humidification Method | Surface Evaporation Type |
| Air Circulation | Centrifugal Blower with Wide-Spectrum Forced Convection (Top-Out/Bottom-In) |
| Condensation Method | Air-Cooled |
| Refrigeration Unit | Original French Tecumseh Hermetic Compressor |
| Refrigeration Circuit | Dual-Stage Cascade Low-Temperature System |
| Airflow Design | Multi-Vane Impeller for Uniform Distribution |
| Exterior Material | Cold-Rolled Steel with Anti-Rust Treatment & Electrostatic Powder Coating OR Optional SUS304 Brushed Stainless Steel |
| Interior Material | SUS304 Stainless Steel Sheet |
| Insulation | Rigid Polyurethane Foam (≥100 mm Thickness) + Ultra-Fine Glass Fiber Blanket |
| Door Seal | Dual-Layer High-Temp/Low-Temp Resistant Silicone Rubber Gasket |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | −99.9 °C to +200 °C |
| Humidity Control | Steam Humidification, 0–100 % RH |
| Resolution | 0.1 °C / 0.1 % RH |
| Programmable Memory | 120 programs × 1200 segments |
| Cycle Repetition | Up to 999 cycles |
| Control Interface | Touchscreen HMI with BTHC (Balanced Temperature & Humidity Control) |
| Safety Features | SSR-based PID control, PT-100 dual-sensor monitoring, real-time fault diagnostics, power cutoff on critical anomaly |
| Compliance | Designed for ASTM D573, ISO 188, IEC 60068-2-14, MIL-STD-810G thermal shock protocols |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (FOB) |
| Temperature Range | -65°C to +150°C |
| Transition Time | ≤15 s (between chambers) |
| Internal Volume | Standard 150 L, 250 L, 400 L, or 800 L configurations available |
| Compliance | IEC 60068-2-14, MIL-STD-810H Method 503.5, JIS Z 8702, GB/T 2423.22 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | −70°C to +180°C |
| Thermal Transition Time (50°C to −50°C or vice versa) | ≤5 min |
| Cycle Count Setting Range | 1–999 cycles |
| Soak Time per Zone | 0–999 h 59 min |
| Test Port | Ø50 mm on left side |
| Control Interface | 7″ Full-Color TFT LCD Touchscreen Controller (English/Chinese) |
| Compliance | ASTM D5229, IEC 60068-2-14, MIL-STD-810H Method 503.5, JIS Z 8707 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB) |
| Temperature Range | -70°C to +180°C |
| Transition Time (Typ.) | ≤15 s (5℃ to -40℃ or +100℃ to -10℃, test zone) |
| Control System | TEMI880 Programmable Touchscreen Controller (Korean Origin) |
| Compliance Standards | GB 10589, GB 11158, GB 10586, IEC 60068-2-14, MIL-STD-810H Method 503.5 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +5°C to 60°C |
| Internal Chamber Dimensions | W120 × H50 × D100 cm |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Spray Mode | Continuous or Cyclic |
| Chamber Material | High-Purity Grey PVC (Acid- and Alkali-Resistant) |
| Heating System | Independent Ni-Cr Alloy Heaters |
| Temperature Sensor | PT100 Platinum Resistance Thermometer |
| Control System | LED Digital PID Controller with Dual-Channel Display |
| Safety Features | Circuit Breakers, Dual Overheat Protection (Electronic & Mechanical), Integrated Water Filtration, Preheated Salt Solution System |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Load Capacity | 60 kg / 150 kg (max) |
| Frequency Range (Manual) | 5–50 Hz |
| Sweep Frequency Range | 5–50 Hz |
| Table Dimensions | 1100 × 800 × 60 mm |
| Overall Unit Dimensions | 1100 × 800 × 900 mm |
| Displacement Amplitude (No-Load) | 0–3.5 mm |
| Timing Range | 0.01 s – 99.99 h |
| Waveform | Sinusoidal |
| Control Mode | Programmable Multi-Stage Sweep (up to 30 segments), Fixed-Frequency, Logarithmic/Linear/Multi-Octave Sweep |
| Power Supply | 3-phase 380 VAC ±5%, 50/60 Hz |
| Power Consumption | 4.2 kVA |
| Cooling Method | Air-Cooled |
| Compliance Standard | GB/T 2423.10 |
| Vibration Axes | Vertical + Horizontal (Simultaneous Dual-Axis Excitation) |
| Drive System | Four-Point Synchronized Electromagnetic Shaker |
| Control Interface | Digital PID Controller with Real-Time Parameter Display and Preview Curve Function |
| Structural Design | Integrated Rigid Base with Passive Vibration Isolation Mounts |
| Optional Features | Time-Based Test Termination, Amplitude Prediction Algorithm, EMI-Resistant Circuitry |
| Key | Brand: OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Compliance | GB/T 2423.1–2, IEC 60068-2-1, IEC 60068-2-2, ISO 16750-4 |
| Interior Dimensions | Customizable (Typical Range: W2000 × D2000 × H2200 mm) |
| Construction | Sandwich Panel with Polyurethane Foam Insulation (≥100 mm thick) |
| Inner Wall Material | SUS304 Stainless Steel |
| Outer Cladding | Pre-painted Galvanized Steel or Color-Coated Steel |
| Floor Load Capacity | 500 kg/m² (uniformly distributed) |
| Door | Single Swing, W800 × H1800 mm, Triple-Layer Vacuum Insulated Window (450 × 340 × 40 mm) |
| Air Circulation | Top-Mounted Forced Convection System with SIROCCO Fans & Extended-Shaft AC Motors (1.5 HP, 380 V/3-phase) |
| Controller | TEMI 880 Touchscreen PID Controller (5.7″ or 10.4″ LCD, 320×240 resolution, bilingual UI, 100 programs × 1000 segments, segment duration up to 99h59m, loop count up to 999, multi-zone PID tuning) |
| Refrigeration | Dual-Stage Cascade System (Low-stage: R404A |
| High-stage | R23) |
| Compressor | Bitzer or Tecumseh Hermetic/Semi-Hermetic Units |
| Key Components | Danfoss TXV & Pressure Switches, Castel Solenoid Valves, Alco Oil Separators, Parker Filters |
| Safety Protections | Ground Fault Detection, Phase Failure & Undervoltage Protection, Chamber Overtemperature Cut-off, Compressor High/Low Pressure Shutdown, Oil Pressure Monitoring, Heater Overload & Short-Circuit Protection, Leak Current Protection, Water Level Sensing (for Humidity Models) |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C |
| Humidity Range | 30–98 %RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤2 °C |
| Humidity Deviation | +2 to –3 %RH |
| Ramp Rate | 0.7–1.0 °C/min |
| Control Accuracy | ±0.1 °C (PID, 0.1-class) |
| Display | Korean-made TFT Touchscreen LCD |
| Interface | RS485/RS232, Ethernet (optional) |
| Programming Capacity | Up to 1000 segments, 999 cycles |
| Compliance | Designed per IEC 60068-2, ISO 16750-4, ASTM D4332, MIL-STD-810H (environmental conditioning) |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Irradiance Setting Range | 450 W/m² (average, adjustable) |
| Lamp Life | ~1,500–2,000 hours |
| Black Panel Temperature Control Range | 30–110°C |
| Humidity Control Range | 10–95% RH (non-condensing) |
| Cooling Medium | R404A refrigerant |
| Compressor | Tecumseh/Taikang hermetic scroll compressor |
| Noise Level | <60 dB(A) |
| Standard Compliance | ISO 4892-2, ASTM G155, SAE J2527, GB/T 16422.2 |
| Filter System | Daylight-Q/B, Extended UV-Q, Window Glass-Q filters |
| Maintenance Interval | Lamp replacement every 1,500 h |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Pricing | USD 5,300 (FOB, subject to configuration and certification requirements) |
| Compliance | ISO 4892-2, ASTM G155, ASTM D4459, DIN 75220, JIS D0205, SAE J2527, BS EN ISO 11341, ANSI C78.377, U.S. Federal Standard 101C |
| Sample Capacity | 24 pcs of 75 mm × 300 mm specimens or 48 pcs of 75 mm × 150 mm specimens |
| Irradiance Control | CR-10-calibrated electronic eye system with automatic feedback loop |
| Black Panel Temperature Range | 30–110 °C |
| Humidity Range | 10–100% RH (condensation mode) |
| Lamp Life | ≥1600 h (with irradiance calibration and proper cooling) |
| Control Interface | Programmable touchscreen HMI with English/Chinese bilingual firmware |
| Power Supply | 380 VAC ±10%, 3-phase, 50/60 Hz |