OEM / Custom Manufacturer
Filter
Showing all 20 results
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70°C to +150°C (configurable) |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Temperature Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temperature Fluctuation | ±2°C |
| Humidity Fluctuation | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Construction Material | SUS#304 Stainless Steel |
| Control System | LCD Touchscreen Controller with English/Chinese Interface |
| Compliance | MIL-STD-810G (Method 501.6, 502.6), IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-30 (Damp Heat Cycle), GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.4–1993 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Vibration Frequency Range | 100–300 rpm (continuous adjustment) |
| Amplitude | 25.4 mm (1 in) peak-to-peak |
| Max Payload Capacity | 100 kg (customizable up to 500 kg) |
| Operating Duration | Up to 9999 h/min/sec |
| Motor Power | 1 HP (746 W) |
| Max Current Draw | 4 A |
| Test Table Dimensions | 100 cm × 120 cm (customizable) |
| Compliance | ASTM D999, ASTM D3580, ISTA 3A/3E/3H, EN 60068-2-6, EN 60068-2-14, ANSI X3.36, UL 60950-1 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Engineered (OK-TH Series) |
| Price | USD 2,650 (FOB) |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable (e.g., OK-TH Series) |
| Price | USD 2,650 (FOB) |
| Internal Volume Range | 80 L to 1000 L |
| Temperature Range Options | 0–150°C, –20–150°C, –40–150°C, or –70–150°C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Temp. Uniformity | ±0.5°C |
| RH Uniformity | ±2.5% RH |
| Temp. Stability | ±2.0°C |
| RH Stability | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Ramp Rate | Heating ~4.0°C/min |
| Refrigeration System | Hermetic, low-noise dual-stage compressor with eco-friendly refrigerants (R404A/R23) |
| Controller | Full-color touchscreen HMI with EN/CH language toggle |
| Construction | Interior & exterior SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film for anti-fog observation |
| Port | One 50 mm diameter test port (left side) |
| Accessories | Two adjustable SUS#304 shelves, four casters + four leveling feet |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable (OK-TH Series) |
| Temperature Range | -70 °C to +150 °C |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Uniformity | ±0.5 °C / ±2.5 %RH |
| Stability | ±2 °C / +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | ~4.0 °C/min (heat-up), ~1.0 °C/min (cool-down) |
| Internal Volume Options | 80 L to 1000 L |
| Construction | Interior & Exterior – SUS#304 Stainless Steel |
| Viewing Window | Multi-layer laminated tempered glass with embedded conductive ITO film |
| Port | One 50 mm diameter test port (left side) |
| Refrigeration System | Hermetic low-noise dual-stage compressor (R404A/R23 eco-refrigerant) |
| Controller | Color TFT touchscreen HMI, bilingual English/Chinese interface |
| Compliance | MIL-STD-810G (Method 501.6, 502.6), IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-78 (Steady-State Damp Heat), IEC 60068-2-30 (Cyclic Damp Heat), GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.4–1993 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Engineered (OK-TH Series) |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| Temperature Range | –70 °C to +150 °C (selectable sub-ranges A–D) |
| Humidity Range | 5–98 %RH (standard 20–98 %RH |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2 to +3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | Heating ~4.0 °C/min |
| Refrigeration | Hermetic dual-stage compressor system with eco-friendly R404A/R23 refrigerant blend |
| Control System | Full-color LCD touchscreen controller with bilingual (English/Chinese) interface |
| Construction | Interior and exterior chambers fabricated from SUS#304 stainless steel |
| Viewing Window | Multi-layer laminated tempered glass with integrated conductive ITO film for anti-fogging and real-time observation |
| Port | One 50 mm diameter test port on left side (sealable, cable-ready) |
| Safety | Comprehensive fault detection — over-temperature, over-humidity, compressor overload, sensor failure — with automatic power cutoff and on-screen alarm logging |
| Compliance | Meets IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-78 (Steady-State Damp Heat), IEC 60068-2-30 (Cyclic Damp Heat), GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.4–1993, MIL-STD-810G Method 502.5 & 507.5, GJB 150.3–1986 & GJB 150.4–1986 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Engineered (OK-TH Series) |
| Price | USD 2,650–12,800 (FOB, based on configuration) |
| Internal Volume Range | 80 L to 1000 L |
| Temperature Range Options | 0°C to +150°C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Temp. Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temp. Stability | ±2.0°C |
| Humidity Stability | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Ramp Rates | Heating ~4.0°C/min |
| Construction | Interior & Exterior — SUS#304 Stainless Steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Test Port | One Ø50 mm port (left side), sealed with silicone gasket |
| Safety | Dual-stage over-temperature/over-humidity protection, real-time fault logging, automatic power cutoff |
| Compliance | MIL-STD-810G Method 501.6 / 502.6 / 507.5 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| Temperature Range | −70 °C to +150 °C (selectable sub-ranges A–D) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | +4.0 °C/min (heat-up), −1.0 °C/min (cool-down) |
| Refrigeration | Hermetic dual-stage compressor with R404A/R23 eco-refrigerant blend |
| Controller | Full-color TFT touch screen, bilingual (English/Chinese) interface |
| Construction | Interior & exterior SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with embedded conductive ITO film |
| Sealing | Dual high-tensile silicone gasket |
| Access Port | One 50 mm diameter test port (left side) |
| Standard Accessories | Two-tier SUS#304 shelves, four casters + leveling feet |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire, 2.5 m cable |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Engineered (OK-TH Series) |
| Price | USD 2,600–12,500 (FOB, based on configuration) |
| Internal Dimensions Range | 40×50×40 cm to 100×100×100 cm |
| Temperature Range Options | 0 to +150°C |
| Humidity Range | 20–98% RH (optional: 5–98% RH or 10–98% RH) |
| Temp. Uniformity | ±0.5°C |
| RH Uniformity | ±2.5% RH |
| Temp. Stability | ±2.0°C |
| RH Stability | +2 to +3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Ramp Rate | Heating ~4.0°C/min |
| Refrigeration System | Hermetic low-noise dual-stage compressor with eco-friendly refrigerants (R404A/R23) |
| Controller | Full-color TFT touchscreen interface with bilingual (English/Chinese) navigation |
| Construction | Interior & exterior chambers fabricated from SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with embedded conductive ITO film for anti-fog observation |
| Sealing | Dual-layer high-tension silicone gasket at door interface |
| Access Port | One Ø50 mm test port (left side), pre-installed with brass gland fitting |
| Safety Systems | Real-time fault detection, over-temperature/over-humidity cutoff, compressor high-pressure protection, phase-sequence monitoring, and emergency power disconnect |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Range | USD 14,000–25,000 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Ramp Rates | 5–25 °C/min (selectable) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0% RH (at ≥75% RH) |
| Humidity Stability | ±2.5% RH |
| Internal Dimensions (W×H×D, cm) | 50×75×60 / 60×85×80 / 100×100×80 / 100×100×100 |
| Test Port | Ø50 mm (left-side, sealed feedthrough) |
| Refrigerant | R507/R23 (zero ODP, low GWP HFC blend) |
| Control System | 7-inch color LCD touchscreen, bilingual (EN/CN), PID auto-tuning, 96 programmable test profiles |
| Safety Protections | Overcurrent, ground fault, compressor high-pressure/overheat, door interlock, over-temperature, leakage current, phase failure detection |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 2423.22–2012, GJB 150.3A–2009, GJB 150.4A–2009, GB/T 10589–2018, GB/T 11158–2012, GB/T 10592–2023 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Frequency Range | 1–5000 Hz |
| Amplitude (p-p) | 0–5 mm adjustable |
| Acceleration Range | 0–20 g (0–196.13 m/s²) |
| Maximum Sinusoidal Force | 2000 kgf (19.6 kN) |
| Frequency Resolution | 0.01 Hz |
| Sweep Mode | Linear & Logarithmic |
| Programmable Test Profiles | Yes |
| Time Setting Range | 1 s to 999 h 59 min 59 s |
| Power Consumption | 3.8 kW |
| Cooling Method | Natural Air Cooling |
| Operating Ambient | −10 °C to +60 °C, 10–95% RH (non-condensing) |
| Sound Pressure Level | ≤60 dB(A) |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| High/Low Temperature Range Options | A / B / C Configurations |
| Temperature Uniformity | ±2.0 °C |
| Transfer Time | ≤8 s |
| Recovery Time | ≤5 min |
| Inner Chamber Material | SUS304 Mirror-Finish Stainless Steel |
| Outer Chamber Material | SUS304 Brushed Stainless Steel |
| Insulation | Rigid Polyurethane Foam + High-Density Glass Fiber |
| Refrigeration System | French Tecumseh Compressor + Japanese/Italian Critical Components |
| Refrigerants | R404A & R23 (EPA SNAP-Approved, Non-Ozone-Depleting) |
| Safety Protections | Compressor High-Pressure / Overheat / Overcurrent |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported (EU/US/Japan Sourced Components) |
| Supplier Type | Authorized Distributor |
| Power Supply | Customizable per client specification |
| Internal Dimensions (W×H×D, mm) | 500×600×500 |
| Temperature Range | −40 °C to +150 °C / −60 °C to +150 °C / −70 °C to +150 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±1.5 °C |
| Temperature Deviation | ≤2 °C |
| Ramp Rate | 3–25 °C/min (linear, programmable) |
| Load Capacity | 5–50 kg aluminum mass |
| Control System | PID-based Balanced Temperature & Humidity Control (BTHC) |
| Refrigeration | Dual-stage mechanical cascade system with R404A/R23 refrigerants |
| Construction | Mirror-finish SUS304 stainless steel interior, insulated with high-density polyurethane foam + glass wool |
| Compliance | GB/T 2423.1–1989, GB/T 2423.2–1989, IEC 60068-2-1, MIL-STD-2164A, GJB 1032–1990 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Voltage | 3φ5W 380VAC ±10% or 2φ3W 220VAC ±10% |
| Inner Chamber Material | SUS#304 Mirror-Finish Stainless Steel |
| Outer Chamber Material | SUS#304 Brushed or Powder-Coated Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Wool |
| Controller | TEMI Touchscreen HMI (South Korea) with PID Logic |
| Refrigeration System | Hermetic Scroll Compressor (France Tecumseh) + Eco-Friendly Refrigerant (R404A/R507) |
| Safety Protections | Compressor Overheat/Overcurrent/High-Pressure, Dry Heater Protection, Chamber Over-Temperature, Low-Water Level Alarm |
| Standard Accessories | Dual Observation Windows with LED Interior Lighting, φ50 mm Cable Port (Left Side), Two Adjustable Sample Racks, Castor Wheels with Brakes, Removable Humidification Tank |
| Compliance | GB/T 2423.1–2023 (Cold), GB/T 2423.2–2023 (Heat), GB/T 2423.34–2012 (Damp Heat Cycling), IEC 60068-2-30:2021 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,800 (FOB ex-factory, subject to configuration) |
| Chamber Volume Options | 5 / 10 / 20 / 50 / 100 m³ |
| Temperature Range | −70 °C to +80 °C (model-dependent) |
| Humidity Range | 10–98 %RH |
| Temperature Uniformity | ≤±2 °C |
| Humidity Uniformity | ±2–3 %RH |
| Temperature Control Accuracy | ±0.1 °C |
| Ramp Rate Options | 0.7–1 °C/min (standard), up to 10 °C/min (optional) |
| Construction | Exterior – Premium Color-Coated Steel |
| Refrigeration System | Single-Stage or Dual-Stage Cascade |
| Compressor | Tecumseh (France) Hermetic Scroll Compressor |
| Controller | YX-880 Touchscreen PID Controller (Hong Kong) |
| Power Supply | AC 1φ 220 V / 3φ 220/380 V, 50/60 Hz |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Temperature Range | -60°C to +80°C |
| Humidity Range | 20–98% RH (optional: 5–98% RH or 10–98% RH) |
| Control System | Microprocessor-Based PID + SSR + Timer |
| Air Circulation | Forced Convection with Extended-Shaft Centrifugal Blower |
| Heating | Nickel-Chromium Resistance Heaters with PID/SSR Regulation |
| Cooling | High-Efficiency Finned-Tube Heat Exchanger |
| Humidification | Stainless Steel Steam Generator with Integrated Pure Water System |
| Dehumidification | Surface-Cooling Condensation via Refrigerated Coils |
| Safety Protections | Compressor Overheat/Overcurrent/High-Pressure, Condenser Fan Overheat, Oil Pressure Monitoring, Phase Sequence & Phase Loss Detection, Earth Leakage Protection, Dry-Run Prevention for Heater/Humidifier, Overtemperature Cut-off, Load Power Terminal (AC220V, ≤2A, Relay-Controlled) |
| Data Interface | USB Mass Storage Export, RS-232C Bidirectional Communication, Ethernet-Based Remote Monitoring & Control |
| Compliance | Designed per IEC 60068-3-5, ASTM D4332, ISO 16750-4 (Environmental Conditions for Automotive Electronics), and GLP/GMP-Ready Architecture |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | China (Manufactured in Wuhan) |
| Supplier Type | Authorized Distributor |
| Import Status | Imported Components |
| Price | USD 4,050 (FOB Wuhan) |
| Temperature Range | 110°C / 132°C (saturated steam) |
| Humidity Range | 100% RH (saturation) |
| Pressure Range | 0.5–2.0 kg/cm² (max safety capacity: 3.5 kg/cm²) |
| Test Duration | 0–999 h (adjustable) |
| Temperature Uniformity | ±2.0°C |
| Heating Rate | RT to 132°C in ≤35 min (at control point) |
| Pressurization Rate | 0.0 to 2.0 kg/cm² in ≤40 min (at control point) |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Controller | Microprocessor-based PID with SSR output |
| Compliance | ASTM F1876, IEC 60068-2-66, JIS C 60068-2-66, ISO 16750-4, MIL-STD-883 Method 1008.8, UL 1577, NACE TM0177, CNS 12403 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 14,200 (FOB) |
| Internal Chamber Dimensions | Ø300 × 450 mm (D × H) |
| External Dimensions | 660 × 950 × 600 mm (W × H × D) |
| Internal Material | SUS316 Stainless Steel or Epoxy-Coated Steel |
| Temperature Resolution | 0.1 °C |
| Pressure Control Range | 0–4 kg/cm² (0–392 kPa) |
| Operating Pressure Range | 1.0–2.5 kg/cm² (98–245 kPa) |
| Saturation Steam Temperature Range | Up to 143 °C at 2.5 kg/cm² |
| Pressure Accuracy | ±0.2–1.5 kg/cm² |
| Heating Method | Insulated High-Voltage Nichrome Heater with PID + SSR Control |
| Air Circulation | Natural Convection of Saturated Steam |
| Compliance | ASTM B117, IEC 60068-2-66, JIS C 60068-2-66, MIL-STD-202G, ISO 9001, UL 61010-1, NACE TM0177 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | China (Manufactured in Nantong) |
| Supplier Type | Authorized Distributor |
| Import Status | Domestic Production (Not Imported) |
| Price | USD 14,000–18,000 (FOB Nantong) |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,500 (FOB) |
| Construction | Stainless Steel (SUS304) Inner Chamber + A3 Steel Outer Casing (t=1.2 mm) |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Turntable | PVC Hardboard Platform |
| Water Contact Components | 304 Stainless Steel or Copper |
| Nozzle System | Precision German-Made High-Pressure Spray Nozzles with Adjustable Angle & Auto-Leveling Water Surface |
| Filtration | Dual-Stage Water Purification System |
| Control Options | Programmable Logic Controller (PLC) or Touchscreen HMI (Full-Color, User-Configurable Profiles) |
| Standards Compliance | MIL-STD-810G Method 506.6, IEC 60529 (IPX1–IPX9K), ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8, IEC 60068-2-68, GB/T 4942.1, IEC 60034-5 |