OEM / Third-Party Manufacturer
Filter
Showing all 25 results
| Key | Brand: OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Compliance | GB/T 5170.2–1996, GB/T 2423.3–1993, GB/T 2423.1–1989, GB/T 2423.2–1989, GJB 150.3–1986, GJB 150.4–1986 |
| Refrigerant | R134a or R507 (ODP = 0, non-flammable, non-explosive) |
| Humidity Sensor | Capacitive electronic type, ±1.5% RH accuracy |
| Cooling System | Twin-stage or cascade refrigeration circuit with hermetic Tecumseh (France) compressors |
| Airflow | Multi-blade centrifugal blower, uniform velocity distribution, ΔT ≤ ±1.0°C across working volume |
| Control Algorithm | PID auto-tuning with disturbance rejection and setpoint ramping |
| Key | Brand: OEM/Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Frequency Range | 5–3000 Hz |
| Max Acceleration | 980 m/s² (100 g, unloaded) |
| Max Velocity | 1.85 m/s |
| Peak-to-Peak Displacement | 51 mm |
| Max Payload | 300 kg |
| Moving Mass | 22 kg |
| Continuous Operation Duration | 20 h |
| Ambient Operating Conditions | 0–40 °C, ≤90% RH (at 25 °C) |
| Compliance | GB/T 13310-2007, GB/T 2423.10-2008, GJB 150.3–1986, GJB 150.16–1986, GJB 360A–1996 (Methods 204, 213, 214), IEC 60068-2-6 |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Power Supply | AC 220 V, Single-Phase, 15 A |
| Platform Dimensions | 1000 mm × 1000 mm |
| Overall Dimensions | 1100 mm × 1200 mm × 650 mm |
| Weight | ~350 kg |
| Drive Mechanism | Motor-Cam Actuation |
| Maximum Displacement | ±25.4 mm (±1 inch) |
| Frequency Range | 2.00–5.00 Hz |
| Rotational Speed Range | 120–300 rpm |
| Continuous Operation Duration | 80 minutes per cycle |
| Cycles per Cycle | 14,500 |
| Operating Temperature | 23 °C ± 5 °C |
| Relative Humidity Limit | <80% RH (non-condensing) |
| Surface Finish | Anodized Aluminum-Magnesium Alloy |
| Mounting Thread Protection | Stainless Steel / Alloy Insert Sleeves |
| Noise Level | <74 dB(A) at 5 Hz |
| Platform Material | 19 mm (3/4") Structural Plate |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | −40 °C to +130 °C |
| Humidity Range | 20 %RH to 98 %RH |
| Temperature Uniformity | ±2 °C |
| Humidity Uniformity | ±3.0 %RH (steady-state) |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Fluctuation | ±2.5 %RH (steady-state) |
| Heating Rate | ~2.5 °C/min (air, no-load, non-linear) |
| Cooling Rate | ~1 °C/min (air, no-load, non-linear) |
| Internal Dimensions (W×D×H) | 3000 × 1000 × 2000 mm |
| External Dimensions (W×D×H) | 3800 × 1300 × 2450 mm |
| Door | Single outward-opening, 1000 × 1900 mm |
| Observation Windows | Front (300 × 450 mm), Left Side (500 × 450 mm) |
| Refrigeration | Mechanical compression refrigeration with water-cooling |
| Power Supply | 380 V ±10 %, 50/60 Hz |
| Total Power Consumption | ~30 kVA |
| Heat Load Capacity | 8.5 kW |
| Compliance | GB10589, GB10592, GB10586, GB11158, GB2423.1–GB2423.4, GB2423.22, GB/T5170.2, GB/T5170.5 |
| Key | Brand: OEM/Third-party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Distributor |
| Price | USD 5,300–12,800 (FOB) |
| Chamber Volume | 100–1000 L |
| Spectral Range | 300–1200 nm |
| Irradiance Control | 550 W/m² (300–800 nm) ±10% |
| Black Panel Temperature Range | 40–85°C |
| Cabinet Temperature Range | 0–150°C |
| Humidity Range (Light Cycle) | 20–75% RH |
| Humidity Range (Dark Cycle) | 20–98% RH |
| Temperature Uniformity | ±2.0°C |
| Humidity Uniformity | ±3.0% RH |
| Temperature Accuracy | ±0.5°C |
| Humidity Accuracy | ±2.0% RH |
| Spray Duration | 1–999 min (intermittent/continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer mesh tray or 500 mm diameter rotating turntable (0–3 rpm) |
| Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ≈1500 h at nominal irradiance |
| Filter System | Daylight- and Window-glass-type optical filters |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Key | Brand: OEM/Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 1,700 (FOB) |
| Compliance | GB/T 4857.5, ISO 2248:1985, GB/T 4857.1–4857.18 |
| Key | Brand: OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 1,700 (FOB) |
| Compliance | GB/T 4857.5, ISO 2248:1985, ASTM D5276 |
| Key | Brand: OEM/Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Max Load Capacity | 25–100 kg (configurable) |
| Frequency Range | 0.5–5000 Hz (±0.1% accuracy) |
| Displacement Peak-to-Peak | 0–5 mm |
| Max Acceleration | <20 g |
| Vibration Axis | Vertical (optional horizontal) |
| Waveform | Sinusoidal |
| Control Resolution | 0.01 Hz display, ±0.1 Hz precision |
| Timing Range | 0–9999 h/m/s (programmable) |
| Table Size | 350 × 350 mm (customizable) |
| Power Supply | AC 220 V / 380 V, 50 Hz |
| Compliance | GB/T 2423.10 |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Display | 5.7-inch color TFT LCD touchscreen |
| Data Storage | Internal 128 KB SRAM with lithium backup + optional CF card expansion |
| Programmability | 20 user-defined test programs, up to 99 segments per program, max 999 loops per program |
| Control Modes | Programmed cycling mode and steady-state mode |
| Environmental Resolution | Temperature ±0.1 °C, Relative Humidity ±0.1 %RH, Time ±1 min |
| Data Logging | Continuous timestamped recording of setpoints and actual values (temperature, RH) at configurable intervals |
| Compliance Support | GLP-compliant audit trail capability via optional printer or CF export |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Max Acceleration | 20 g (peak) |
| Max Displacement | 5 mm p-p |
| Frequency Range | 1–600 Hz (standard), up to 5000 Hz (customizable) |
| Load Capacity | 100 kg |
| Power Rating | 2.2 kW |
| Table Surface Options | 30×30 cm, 50×50 cm, 75×75 cm, or 100×100 cm |
| Vibration Axes | Vertical (Z-axis) and Horizontal (X/Y-axis) |
| Waveform | Sinusoidal |
| Control Modes | Sweep, Programmable (15-segment), Logarithmic, Octave (15-step), Frequency Tuning |
| Brand | OEM/Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Temperature Range | -20°C to +150°C, -40°C to +150°C, -60°C to +150°C, or -70°C to +150°C (configurable) |
| Temperature Uniformity | ≤ ±2.0°C (down to ±0.5°C optional) |
| Temperature Stability | ≤ ±0.5°C (down to ±0.1°C optional) |
| Humidity Range | 30–98% RH (customizable) |
| Humidity Accuracy | +2% / −3% RH |
| Heating Rate | 2–3°C/min (up to >10°C/min optional) |
| Cooling Rate | 0.7–1.0°C/min (up to >10°C/min optional) |
| Noise Level | ≤65 dB(A) |
| Construction | Cold-rolled steel outer shell with phosphate & electrostatic powder coating |
| Interior | SUS304 stainless steel 2B finish |
| Insulation | Ultra-fine glass fiber (low thermal conductivity, non-flammable) |
| Door Seal | Dual-layer high-temp/low-temp resistant silicone rubber gasket |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price Reference | USD 3,100 (ex-works, indicative only) |
| Brand | OEM / Third-party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,100 (FOB) |
| Temperature Range | −65 °C to +150 °C |
| Humidity Range | 20–95 % RH |
| Temp. Uniformity | ±2.0 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0 % RH |
| Humidity Stability | ±1.5 % RH |
| Heating Rate | ≥2.5 °C/min (from 20 °C to 85 °C in ≤60 min) |
| Cooling Rate | ≥1.0 °C/min (from 20 °C to −40 °C in ≤70 min) |
| Refrigeration System | Dual-stage mechanical refrigeration (hermetic compressors, R23/R404A) |
| Internal Material | Mirror-finish SUS304 stainless steel |
| Insulation | 100 mm high-density fiberglass + polyurethane foam |
| Control System | TEMI880 color touchscreen PID controller with data logging, curve plotting, alarm history, and multi-segment programmability |
| Brand | OEM/Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Frequency Range | 5–3000 Hz (model-dependent) |
| Max. Force | Up to 160 kN |
| Max. Displacement | 25.4 mm peak-to-peak |
| Acceleration Capacity | 3–20 g (depending on configuration) |
| Axes | Uniaxial, Biaxial, or Triaxial Options Available |
| Control Architecture | Closed-loop (electrodynamic & electrohydraulic models), Open-loop (mechanical models) |
| Brand | OEM / Third-party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Chamber Dimensions (W×D×H) | 1000 × 1000 × 1000 mm |
| Operating Temperature Range | +5 to +36 °C |
| Max Relative Humidity | ≤85 %RH |
| Nozzle Quantity | 25 |
| Nozzle Diameter | 0.4 mm |
| Nozzle Spacing | 50 mm |
| Spray Arm Radius | 375 mm |
| Spray Arm Inner Diameter | 16 mm |
| Oscillation Angle | Adjustable from ±45° to ±90° (180° total sweep) |
| Oscillation Speed | 60°/s (variable via frequency inverter) |
| Construction | Cold-rolled steel exterior with powder coating |
| Sealing | Dual-layer silicone rubber gasket with rotary waterproof joint |
| Viewing Window | Reinforced organic glass with integrated wiper and LED lighting |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price Reference | USD 5,200 (excl. tax & freight |
| Effective Irradiation Area | 900 × 210 mm (W × H) |
| Standard Specimen Size | 75 × 150 mm or 75 × 300 mm |
| UV Irradiance | UVB-313: 0.55 W/m² |
| UVA-340 | 0.68 W/m² |
| Temperature Resolution | 0.1 °C |
| Light Cycle Temperature Range | 50–70 °C (±3 °C tolerance) |
| Condensation Temperature Range | 40–60 °C (±3 °C tolerance) |
| Black Panel Thermometer Range | 30–80 °C (±1 °C tolerance) |
| Water Tray Depth | Auto-controlled |
| External Dimensions | Approx. H1550 × W1350 × D510 mm |
| Lamp Center-to-Center Spacing | 70 mm |
| Minimum Specimen-to-Lamp Distance | ~50 mm |
| Spectral Range (UV-A) | 315–400 nm |
| Humidity Range | 30–80 %RH (light cycle) |
| Humidification Method | Steam generation via SUS304 stainless steel heater and reservoir |
| Humidity Sensor Type | Dry/Wet Bulb |
| Brand | OEM / Third-party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Pricing | USD 3,950–6,800 (FOB) |
| Internal Dimensions (W×H×D) | Ø250×300 mm / Ø350×400 mm / Ø450×500 mm / Ø650×600 mm |
| Chamber Material | ASTM A240 Type 316 Stainless Steel |
| External Casing | Powder-coated or 304 stainless steel |
| Temperature Range | +10°C to 132°C (optional 147°C custom calibration) |
| Pressure Range | 0–2.5 kg/cm² gauge (0–35.5 psi), max absolute pressure 3.5 kg/cm² |
| Heating Method | Immersed electric heating elements |
| Humidification | Direct steam generation via electric heater |
| Water Replenishment | Stainless steel float valve system |
| Cycle Control | LED digital timer with temperature-triggered start (ASTM E2035-compliant timing logic) |
| Safety Interlocks | Dual mechanical pressure lock, overpressure relief valve (ASME BPVC Section VIII compliant), door-seal integrity verification prior to pressurization |
| Power Supply | 220–240 VAC, 50/60 Hz, single-phase |
| Thermal Stability | ±0.5°C at setpoint (121°C) |
| Circulation | Natural convection steam atmosphere |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Temperature Range (Loaded) | -40 °C to +85 °C |
| Temperature Range (Unloaded) | -70 °C to +150 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 20–98% RH |
| Humidity Stability | ±2.5% RH |
| Humidity Uniformity | ±4.0% RH |
| Compliance Standards | IEC 61215, IEC 61646, IEC 62108, IEC 61730, UL 1703, IEEE 1513, GB/T 5170.2, GB/T 5170.5 |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Temperature Range | −70 °C to +180 °C |
| Ramp Rate | Up to 15 °C/min (typical, load-dependent) |
| Control Accuracy | ±0.1 °C (display resolution), ±0.3 °C (actual chamber uniformity) |
| Sensor | Class A Pt100 RTD (IEC 60751) |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 2423.3–2023, IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78 |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported (Non-US/EU Designated Origin) |
| Supplier Type | Authorized Distributor |
| Pricing | USD 11,200 (FOB) |
| Control System | TEMI880 Color Touchscreen Controller (English/Chinese Switchable) or TEMI300 Membrane Keypad Controller (English Only) |
| Temperature Range | −70 °C to +180 °C (Standard Configuration) |
| Thermal Transition Rate | ≥10 °C/min (Typical, 5–15 °C/min Adjustable per Profile) |
| Humidity Range | 20–98% RH (Optional with Humidity Module) |
| Internal Volume | 100–1000 L (Configurable) |
| Refrigeration | Twin-Stage or Single-Stage Hermetic Compressor (Original Tecumseh/Tecumseh-derived or “Tecumseh-compatible” Compressor) |
| Insulation | Polyurethane Rigid Foam (≥100 mm Thickness) + Fiberglass Blanket Lining |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | Powder-Coated Cold-Rolled Steel or Optional SUS304 Brushed Finish |
| Air Circulation | Centrifugal Blower with Wide-Band Forced Convection (Top-Out/Bottom-In Flow Pattern) |
| Compliance | Designed per IEC 60068-2-14, MIL-STD-810H Method 503.5, JIS Z 8701-1998 |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 16,800 (FOB) |
| Compliance | ISO 13374-2, ASTM D999, IEC 60068-2-27, MIL-STD-810H Method 516.8 |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 16,500 (FOB) |
| Compliance | ISO 2247, ASTM D880, ISTA 3A, MIL-STD-810H Shock Methods |
| Brand | OEM / Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Distributor Type | Authorized General Distributor |
| Price | USD 3,200 (FOB) |
| Compliance | Fully Compatible with ISO 6892-1, ASTM E4, ASTM D638, ASTM D3039, ASTM D790, ISO 527-1, ISO 178, ISO 1183, ISO 2285, ISO 2921, EN 10002-1, GB/T 16491, GB/T 1040, GB/T 2792, GB/T 3923.1 |
| Key | Brand: OEM/Third-party Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,800 (FOB) |
| Table Dimensions (W×D×H) | 500 × 500 × 160 mm |
| Active Table Surface | 500 × 500 mm |
| Axis | Vertical Only |
| Max. Payload | 100 kg |
| Frequency Range | 1–600 Hz |
| Sweep Range | 1–600 Hz |
| Displacement Amplitude | 0–5 mm peak-to-peak |
| Max. Acceleration | 20 g (rms) |
| Waveforms | Sine, Half-sine |
| Control Resolution | 0.01 Hz (frequency), 0.01 mm (displacement), 0.01 g (acceleration) |
| Power Rating | 2.2 kW |
| Input Voltage | 220 V ±10%, 50/60 Hz |
| Max. Current Draw | 5 A |
| Operating Duration | Programmable up to 31,536,000 s (1 year) |
| Compliance | Designed per IEC 60068-2-6, ISO 10816-1, MIL-STD-810H Method 514.8 |
| Brand | OEM / Third-party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 4,800 (FOB reference only |
| Chamber Dimensions (W×D×H) | 600 × 500 × 500 mm |
| Temperature Range | RT+10°C to 80°C |
| Humidity Range | 30–98% RH (30–65% RH during irradiation |
| Irradiance Spectrum | 290–800 nm |
| Irradiance Level | 550 W/m² (broadband, calibrated at specimen plane) |
| Light Source | Air-cooled 1 kW or 6 kW full-spectrum xenon arc lamp (rated life: 1600 h) |
| Black Panel Temperature Range | 55–75°C |
| Rainfall Duration | 1–9999 min (adjustable) |
| Rain Cycle Interval | 1–240 min (adjustable) |
| Control System | Programmable microprocessor-based temperature/humidity/irradiance controller (±0.1°C setpoint accuracy |
| Heating | Independent Ni-Cr alloy resistive heaters |
| Humidification | External stainless steel shallow-pan evaporative system |
| Air Circulation | Low-noise centrifugal blower with multi-vane impeller |
| Construction | Exterior — powder-coated color steel or brushed SUS304 stainless steel |
| Safety Protections | Overtemperature, overcurrent, leakage current, dry-run, motor overload, water shortage, and power-loss memory function |