OEM
Filter
Showing 1–30 of 135 results
| Brand | OEM |
|---|---|
| Max Load Capacity | 100 kg |
| Table Surface Dimensions (L×W) | 50 × 50 cm |
| Vibration Axes | Vertical (Z) + Horizontal (X/Y) |
| Frequency Range | 1–600 Hz (optional up to 5 kHz) |
| Max Acceleration | 20 g |
| Max Displacement (p-p) | 5 mm |
| Waveform | Sinusoidal |
| Drive Power | 2.2 kW |
| Control Interface | RS-485 (external controller required) |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Input Voltage | 220 V ±20% |
| Max Current | 5 A |
| Compliance | Designed for ISO 10816, ASTM D999, MIL-STD-810H vibration profile execution |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 630 (FOB) |
| Measurement Range | 0–100 kg/cm² (0.1 kg/cm² resolution) |
| Pressure Transducer Type | High-precision hydraulic load cell |
| Display | LED, with dual-unit output (kg, N, lbf) |
| Hydraulic Oil Displacement Rate | 170 ± 15 mL/min |
| Dimensions (W×D×H) | 450 × 430 × 520 mm |
| Accuracy | ±1 kPa |
| Calibration Interface | Built-in traceable calibration routine compliant with ISO 7267-1 and ASTM D774 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 630 (FOB) |
| Standards Compliance | ISO 2759, ASTM D2210, TAPPI T403, GB/T 6545, JIS L1004/L1018/L1031, QB/T 1057 |
| Drive System | Taiwan-made AC frequency-controlled motor |
| Load Cell | U.S.-sourced explosion-proof precision load cell (±0.5% FS) |
| Actuation | Precision ball screw vertical drive |
| Pressure Medium | High-stability silicone oil (replaces glycerin-water mixture) |
| Clamping | Pneumatic sample holder with calibrated pressure gauge |
| Display & Control | Backlit LCD interface with embedded microcontroller |
| Data Storage | 50-test non-volatile memory |
| Output | Integrated thermal printer |
| Safety | Emergency stop switch, automatic return-to-home post-failure |
| Test Modes | Burst strength, constant-load hold (stack compression simulation) |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Compliance | ISO 2759, GB/T 1539 |
| Operating Pressure Range | 0–1.5 MPa (adjustable via precision pneumatic regulator) |
| Burst Force Resolution | 0.01 kPa |
| Data Storage Capacity | 50 test records |
| Calibration Adjustment | User-accessible digital offset compensation |
| Safety | Dual-circuit emergency stop, auto-return to home position post-failure |
| Output | Integrated thermal printer with timestamped reports |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 630 (FOB) |
| Standards Compliance | ISO 2759, ASTM D2210, TAPPI T403, GB/T 6545, JIS L1004/L1018/L1031, QB/T 1057 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Internal Liner | SUS304 Stainless Steel |
| External Casing | Cold-Rolled Steel with Electrostatic Powder Coating |
| Insulation | Rigid Polyurethane Foam or Ultra-Fine Glass Wool |
| Sealing | High-Performance Silicone Gasket |
| Control Method | BTHC (Balanced Temperature & Humidity Control) |
| Controller | Korean-Made 7" Touchscreen HMI with PID Auto-Tuning, 0.1°C/0.1%RH Accuracy |
| Heating | Stainless Steel Finned Air Heater |
| Humidification | Shallow-Water Pan Steam Generator |
| Refrigeration | Hermetic Compressor, Single-Stage or Cascade Cryogenic Circuit |
| Water Purification System | Integrated Deionized Water Filter |
| Auto-Fill Function | Power-On Water Intake |
| Air Circulation | Custom Aluminum Impeller with AC Motor |
| Observation Window | Reinforced Double-Layer Tempered Glass with LED Illumination |
| Vibration Interface | Motorized Vertical Height Adjustment Mechanism (±150 mm Range) |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 2423.4–2023, GB/T 2423.22–2023 |
| Key | Brand: OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Max. Load Capacity | 100 kg |
| Frequency Range | 1–5000 Hz (0.01 Hz resolution, ±0.1 Hz accuracy) |
| Sweep Range | 1–5000 Hz (programmable duration: 1 s to 30 days) |
| Displacement Peak-to-Peak | 0–5 mm |
| Max. Acceleration | 20 g |
| Vibration Axes | Vertical + Horizontal (dual-axis synchronized control) |
| Waveform | Sine only |
| Programmable Segments | Up to 15 segments per test profile, each with independent frequency/time settings |
| Octave Tracking | 5-step logarithmic sweep (low→high, high→low, low→high→low, repeatable) |
| Table Surface | 50 × 50 cm (customizable) |
| Amplifier Power Rating | 2.2 kW |
| Input Voltage | 220 V ±20% AC |
| Max. Current Draw | 5 A |
| Control Interface | Full PC-based real-time control with waveform synthesis, data logging, and event-triggered sequencing |
| Calibration Traceability | NIST-traceable reference available upon request |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 5,200–14,800 (FOB) |
| Temperature Range | 0–150°C (Chamber), 40–85°C (Black Panel) |
| Humidity Range | 20–98% RH |
| Irradiance | 550 W/m² ±10% (300–800 nm) / 1000 W/m² ±10% (300–1200 nm) |
| Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ≈1,500 h |
| Spray Cycle | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer mesh tray or 500 mm rotary turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Compliance | ASTM G155, ISO 4892-2, AATCC TM16, SAE J2527, GB/T 16422.2 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 1,700 (FOB) |
| Compliance | GB/T 4857.5, ISO 2248:1985, GB/T 4857.1, GB/T 4857.2, GB/T 4857.17, GB/T 4857.18 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Frequency Range | 1–5000 Hz (±0.01 Hz resolution) |
| Max Load Capacity | 100 kg |
| Peak Force | 2000 kgf |
| Table Size | 500 × 500 × 6 mm (L×W×H) |
| Table Mounting | 25 × M10 threaded holes + 16 × hook slots (70 mm length) |
| Motion Axes | 6-DOF synchronized or selectable 1–3 axis operation |
| Waveforms | Sine (half/full), multi-stage random, road profile simulation, logarithmic sweep, programmable step/segment profiles (15-segment max) |
| Control Modes | Fixed-acceleration sweep, fixed-amplitude sweep, harmonic倍频, linear/logarithmic sweep, time-controlled dwell, amplitude & acceleration modulation |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,800 (FOB) |
| Max Load Capacity | 40 kg |
| Table Dimensions (L×W×H) | 450 × 450 × 46 mm |
| Vibration Axes | Vertical & Horizontal |
| Frequency Range | 1–200 Hz (adjustable to 0.01 Hz resolution) |
| Acceleration Range | 10–750 m/s² |
| Peak-to-Peak Amplitude | 0–4 mm (continuously adjustable) |
| Waveform | Sinusoidal |
| Control Modes | Sine, Swept-Sine (up/down sweep), Programmable (30-segment, frequency/time per segment, loopable) |
| Power Input | 380 V ±10%, 4.2 kW |
| Magnetic Shielding | Magnesium-alloy tabletop for effective electromagnetic field isolation |
| Cooling | Integrated low-noise forced-air cooling system |
| Compliance | Designed to support ISO 10816-1, ISO 2041, ASTM D999, IEC 60068-2-6, and MIL-STD-810H vibration test profiles |
| Key | Brand: OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Frequency Range | 5–500 Hz |
| Sweep Range | 5–500 Hz |
| Peak-to-Peak Displacement (Unloaded) | 0–5 mm |
| Table Dimensions | 550 × 550 × 46 mm |
| Control Cabinet Dimensions | 350 × 250 × 710 mm |
| Maximum Load Capacity | 100 kg |
| Vibration Axes | Vertical (Z), Horizontal (X/Y) |
| Max Acceleration | 33 g |
| Operating Ambient Temperature | 0–45 °C |
| Control Method | Digital PID with Programmable Sweep & Fixed-Frequency Modes |
| Amplitude Adjustment | Continuous (Stepless) |
| Excitation Configuration | 9-Point Synchronized Electromagnetic Actuation |
| Compliance | Designed to Support ISO 10816, IEC 60068-2-6, MIL-STD-810H Vibration Test Protocols |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (reference only) |
| Temperature Range | –40 °C to +150 °C (optional: –120 °C to +150 °C) |
| Temperature Resolution | 0.01 °C |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Humidity Range | 30–98% RH (optional: 5–98% RH) |
| Humidity Resolution | 0.1% RH |
| Humidity Deviation | ≤ ±2.5% RH |
| Cooling Rate | 0.7–1.0 °C/min |
| Heating Rate | 2.0–3.0 °C/min |
| Control System | TEMI880 Color LCD Touchscreen Programmable Controller |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G (220 V optional) |
| Inner Chamber Material | SUS304 Stainless Steel |
| Outer Casing | SUS304 Stainless Steel or A3 Steel with Electrostatic Powder Coating (Paint-Finished) |
| Ambient Operating Conditions | 25 °C ±6 °C, No Load |
| Cooling Water Requirements | 10–28 °C, 0.1–0.3 MPa |
| Key | Brand: OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Temperature Range Options | A: 0–150°C |
| B | −20–150°C |
| C | −40–150°C |
| D | −70–150°C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Temp Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temp Stability | ±2.0°C |
| Humidity Stability | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Refrigerant | R404A/R23 (environmentally compliant) |
| Controller | Touchscreen LCD with English/Chinese interface |
| Interior Material | SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Sealing | Dual-layer high-tension heat-resistant gasket |
| Safety | Real-time fault detection, automatic power cutoff, over-temperature/over-humidity protection |
| Compliance | MIL-STD-810G (via GJB 150.3/150.4), IEC 60068-2-1 (Cold), -2-2 (Dry Heat), -2-30 (Cyclic Humidity), GB/T 2423.1–2423.4 |
| Key | Brand: OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 7,200 (Reference FOB) |
| Temperature Range | −70°C to +180°C (typical) |
| Humidity Range | 20–98% RH |
| Control Stability | ±0.5°C / ±2.0% RH |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, IEC 60068-2-1, IEC 60068-2-2, GJB 1032A–2021, MIL-STD-2164A |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Internal Dimensions (Ø × H) | Φ250×300 mm to Φ650×600 mm |
| External Dimensions (W×H×D) | 500×500×700 mm to 950×900×1100 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Saturation Pressure Range | 0.0–2.0 kg/cm² (gauge) — up to 3.0 kg/cm² on request |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Systems | Low-water cutoff, overpressure relief, auto/manual water replenishment, automatic steam venting |
| Standard Accessories | Two stainless-steel shelves |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 920 (FOB) |
| Temperature Range | Ambient +20°C to 500°C |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | 1.2 mm Cold-Rolled A3 Steel with Powder Coating |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Door Insulation | Glass Fiber Mat |
| Heating System | 2 kW Nickel-Chromium Far-Infrared Heaters (Independent Circuit) |
| Control System | Fuji Electric PXR Series PID Controller with SSR Output |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Turbine Fan (SUS310S Shaft, Ceramic Bearings) |
| Safety Features | Overtemperature Cut-off, Leakage Current Protection, Real-Time Thermal Runaway Monitoring |
| Compliance | Designed per IEC 60068-2-2 (Test B: Dry Heat), ASTM D3045, and ISO 188 Annex C for thermal aging of polymers |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 920 (FOB) |
| Internal Chamber Material | SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Door Insulation | Glass Fiber Cotton |
| Outer Casing | 1.2 mm Cold-Rolled A3 Steel with Electrostatic Powder Coating |
| Heating System | 2 kW Far-Infrared Ni-Cr Alloy Heater (Independent Circuit) |
| Temperature Control | Fuji Electric PXR Series PID Controller with Auto-Tuning |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Compliance | GB/T 2423.2-2008 (Equivalent to IEC 60068-2-2:2007, ASTM D3574, ISO 188) |
| Safety Features | Over-Temperature Alarm & Cut-Off, Earth Leakage Protection, Real-Time Monitoring |
| Key | Brand: OEM |
|---|---|
| Origin | Imported |
| Construction | SUS304 Inner Chamber, A3 Steel Outer Casing w/ Powder Coating |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Exchange Timing | 1 min – 99 h adjustable |
| Power | 4.0–9.0 kW (model-dependent) |
| Internal Dimensions | 450×450×500 mm to 800×1000×1000 mm |
| Insulation | High-Density Glass Fiber Mat |
| Air Circulation | Horizontal Forced Convection w/ Adjustable Baffles |
| Controller | PID + SSR Microprocessor-Based Digital Controller |
| Timer Range | 1–9999 min |
| Safety Protections | Overtemperature, Overcurrent, Leakage, Motor Overheat, Short-Circuit |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-05, UL 1581, GB/T 2423.2, IEC 60068-2-2, JIS C 0021, VDE 0470 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 950 (FOB) |
| Temperature Range | Ambient +20°C to 500°C |
| Exterior Material | 1.2 mm Cold-Rolled SECC Steel with Powder Coating |
| Interior Material | SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Door Insulation | Glass Fiber Wool |
| Heating System | 2 kW Far-Infrared Ni-Cr Alloy Heater (Independent High-Temp Circuit) |
| Control System | Fuji Electric PID Controller with SSR Output |
| Sensor | Pt100 Platinum RTD |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Turbine Fan |
| Safety Features | Overtemperature Cut-off, Leakage Current Protection, Audible/Visual Alarm |
| Compliance | Designed per IEC 60068-2-2 (Ed. 7.0), ASTM D3045, and ISO 188 Annex A |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | Ambient +20°C to 500°C |
| Construction | SECC External Shell + SUS304 Stainless Steel Interior |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Heating System | 2 kW Nickel-Chromium Far-Infrared Heaters (Independent High-Temp Circuit) |
| Control System | Fuji Electric PID Controller with SSR Output |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Turbine Fan |
| Safety | Dual Overtemperature Protection (Fiber Thermal Cut-off + Microprocessor-Based Auto-Shutdown) |
| Compliance | Designed for ASTM D3045, ISO 4892-2, IEC 60068-2-2, and MIL-STD-810H thermal aging protocols |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Table Surface | 500 × 500 mm |
| Max Load Capacity | 100 kg |
| Vibration Axes | X/Y/Z (Vertical Dominant) |
| Frequency Range | 1–600 Hz / 1–3000 Hz / 1–5000 Hz (Model-Dependent Selection) |
| Amplitude | 0–5 mm peak-to-peak |
| Max Acceleration | <20 g |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Waveform | Sinusoidal |
| Timing Control | Single/Segment/Multi-Segment (0–9999 h/min/sec) |
| Input Power | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Electromagnetic Immunity | Enhanced EMI Suppression Circuitry |
| Table Material | Non-Magnetic, Electrostatically Neutral Aluminum Alloy |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Internal Dimensions (Φ×D) | 30×45 cm to 60×65 cm |
| Temperature Range | 121°C, 132°C (143°C optional) |
| Saturation Pressure Range | 0–2.0 kg/cm² (abs), up to 3.0 kg/cm² (custom) |
| Humidity | 100% RH (saturated steam) |
| Temp. Uniformity | ≤±2°C |
| Pressure Safety | Overpressure, overtemperature, and low-water interlocks |
| Power Supply | AC 220±5 V / 50±0.5 Hz |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Cooling Configuration | Single-Stage or Cascade Refrigeration System (R404A/R23/R14) |
| Temperature Range | -70°C to +180°C (configurable) |
| Humidity Range | 20–98% RH |
| Controller | TEMI880 Programmable Touchscreen PID Controller with RS485 Communication |
| Compliance | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.3–1993, GB 10586–2006, GB 10589–2006, GB 10592–2006, GB 11158–2006, GB/T 5170.2–1996, GB/T 5170.5–1996 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Temperature Range | -70°C to +150°C (selectable variants) |
| Humidity Range | 20–98% RH (optional 5–98% RH) |
| Temp. Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temp. Fluctuation | ±2.0°C |
| Humidity Fluctuation | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Construction | SUS#304 Stainless Steel Interior & Exterior |
| Refrigeration System | Dual-stage hermetic compressors (R404A/R23) |
| Controller | Touchscreen LCD with bilingual (EN/CN) interface |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Standard Accessories | Ø50 mm cable port ×1, two-tier SUS#304 shelves, four casters + four leveling feet |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Internal Chamber Dimensions (W×D×H) | 600 × 450 × 400 mm |
| Test Temperature Range | 35–50 °C (Chamber), 47–63 °C (Saturated Air Tank) |
| Temperature Uniformity | ±0.5 °C |
| Temperature Control Accuracy | ±0.1 °C (PID Digital Controller) |
| Humidity Control Method | Saturated Air Tank (Henry’s Law Principle) |
| Spray Nozzle Material | Borosilicate Glass (PYREX®) |
| Spray Mode | Continuous (ASTM B117) or Cyclic (GB/T 2423.17, GJB 150.11A, DIN 50021) |
| Safety Features | Dual Over-Temperature Protection, Auto Water-Level Detection & Refill, Crystallization-Free Fog Distribution |
| Heating System | Jacketed Water Bath with Titanium-Sheathed Infrared Heaters (Ni-Cr Core) |
| Compliance | GB/T 2423.17, GB/T 10587, GJB 150.11A, ASTM B117, ISO 9227, DIN 50021 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Range | RT+10 °C to 70 °C |
| Salt Solution Circulation | Dual-pump alternating system |
| Dwell Time Control | Adjustable up/down immersion intervals (0.01 s–9999 hr) |
| Total Test Duration | Programmable 0.01 s–9999 hr |
| Cycle Counter | 0–99999 cycles (resettable) |
| Compliance | GB/T 2423.17, GB/T 10587, GJB 150.11A, DIN 50021, ISO 9227 (as applicable) |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | HK-265 |
| Price | Upon Request |
| Power Supply | AC 220 V ±10%, 50 Hz |
| Temperature Control Range | 20–100 °C |
| Temperature Stability | ±0.1 °C (optional ±0.01 °C with HK-265A configuration) |
| Heating Power | 1800 W |
| Illumination | LED with silicone diffuser panel |
| Sample Holders | 4 capillary viscometer clamps |
| Safety Features | Liquid-level protection sensor |
| Cooling Interface | Dedicated external chiller port |
| Operating Environment | 5–40 °C, ≤85% RH |
| Key | Brand: OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,500 (FOB) |
| Load Capacity Options | 50 / 100 / 200 / 500 / 1000 kgf |
| Force Resolution | 1/100,000 (1/250,000 for ≤10 kN models) |
| Force Accuracy | ≤0.5% FS (≤0.25% FS for ≤10 kN models) |
| Crosshead Travel | 1000 mm (excl. grips) |
| Test Speed Range | 5–300 mm/min (software-controlled, stepless) |
| Drive System | Panasonic AC servo motor + servo driver |
| Transmission | Precision ground ball screw + timing belt + Liming gearbox |
| Load Cell | Explosion-proof high-precision strain-gauge transducer with auto-thermal compensation, zero drift <0.01% FS/°C, repeatability ±0.03% FS, overload capacity 150% FS |
| Position Feedback | 2500 PPR optical encoder |
| Safety Features | Mechanical stroke limiter, software-based load upper-limit alarm, automatic halt on specimen rupture |
| Data Acquisition | PC-based real-time control and analysis, curve plotting (stress–strain, load–displacement), peak hold, auto-stop on break, unit switching (g/kg/N/kN/lbf), report generation & export (PDF/Excel) |