OK
Filter
Showing 61–90 of 132 results
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | OK-STH-4m2.0000 |
| Internal Dimensions (D×W×H) | 1500 × 1800 × 1500 mm |
| Temperature Range | −50 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Rate | 3 °C/min |
| Cooling Rate | 1 °C/min |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic |
| Model | OK-STH-8.212m² |
| Internal Dimensions (D×W×H) | 2000 × 2000 × 2000 mm |
| Temperature Range Options | A: 0°C / B: −20°C / C: −40°C / D: −60°C / E: −70°C |
| Temperature Uniformity | ±3°C |
| Temperature Control Accuracy | ±1°C |
| Heating Rate | 1.0–4.0°C/min |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | OK-STH-8.8.0m² |
| Internal Dimensions (W×D×H) | 2000 × 2000 × 2000 mm |
| Temperature Range Options | A: 0°C to +80°C |
| B | −20°C to +80°C |
| C | −40°C to +80°C |
| D | −60°C to +80°C |
| E | −70°C to +80°C |
| Temperature Uniformity | ±3°C |
| Temperature Control Accuracy | ±1°C |
| Heating Rate | 1.0–4.0°C/min |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | OK-STH-8m2.000000 |
| Internal Dimensions (W×D×H) | 2000 mm × 2000 mm × 2000 mm |
| Temperature Range | −50 °C to +150 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Control Accuracy | ±1 °C |
| Heating Rate | 3 °C/min (typical) |
| Cooling Rate | 1 °C/min (typical) |
| Humidity Range | 30–98 %RH |
| Humidity Control Accuracy | ±1 %RH |
| Temperature Measurement Sensor | PT100 Platinum Resistance Thermometer |
| Control System | RKC PID Digital Controller with SSR Output |
| Communication Interface | RS-232 / RS-485 |
| Compliance Standards | GB/T 10586–2014, GB/T 10592–2012, GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 2423.3–2016, GB/T 2423.4–2022 |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | OK-TH-408.0 |
| Instrument Type | Benchtop |
| Condensation Method | Air-Cooled |
| Temperature Range | -20 °C to +150 °C |
| Humidity Range | 20–98% RH |
| Temperature Deviation | ≤ ±2 °C |
| Temperature Uniformity | ±1 °C (High Temp), ±2 °C (Low Temp) |
| Humidity Deviation | ≤ ±3% RH |
| Humidity Uniformity | ±3% RH |
| Heating Rate | 1.0–3.0 °C/min |
| Interior Dimensions (W×H×D) | 600 × 850 × 800 mm |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | OK-TH-800.0 |
| Instrument Type | Benchtop |
| Condensation Method | Air-Cooled |
| Temperature Range | -40 °C to +150 °C |
| Humidity Range | 20–98 % RH |
| Temperature Deviation | ≤ ±2 °C |
| Temperature Uniformity | ±1 °C (High Temp), ±2 °C (Low Temp) |
| Humidity Deviation | ≤ ±3 % RH |
| Humidity Uniformity | ±3 % RH |
| Heating Rate | 1.0–3.0 °C/min |
| Internal Chamber Dimensions | 1000 × 1000 × 800 mm (W × D × H) |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | OK-ZTH-520 |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 %RH at 20–85 °C |
| Temperature Ramp Rate | 5 / 10 / 15 °C/min |
| Temperature Uniformity | ≤ ±0.5 °C |
| Standard Load Capacity | 15 kg aluminum mass block with 350 W internal heat dissipation |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | STH-10M3A |
| Internal Dimensions (W×D×H) | 2000 × 2000 × 2500 mm |
| Temperature Range | −70°C to +80°C (selectable sub-ranges: A: 0°C, B: −20°C, C: −40°C, D: −60°C, E: −70°C) |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Humidity Fluctuation | ±3.0% RH (75–98% RH), ±5.0% RH (20–75% RH) |
| Temperature Deviation | ±2°C |
| Control Accuracy | ±1°C |
| Average Heating Rate | 1.0–4.0°C/min |
| Average Cooling Rate | ≥1.0°C/min (full range) |
| Refrigeration System | Hermetic dual-stage cascade compressor with eco-friendly refrigerants R404A/R23 |
| Controller | 7-inch color LCD touch screen with bilingual (English/Chinese) interface |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Construction | Interior – 304 stainless steel |
| Compliance | GB/T 2423.1–2001 (Cold), GB/T 2423.2–2001 (Dry Heat), GB/T 2423.3–2006 (Constant Damp Heat), GB/T 2423.4–2008 (Cyclic Damp Heat), GJB 150.3A–2009 (High Temp), GJB 150.4A–2009 (Low Temp), GJB 150.9A–2009 (Humidity) |
| Brand | OK |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Product Origin | Domestic |
| Model | OK-TS-5 |
| Price | ¥89,000 |
| High-Temperature Range (°C) | +150 |
| Low-Temperature Range (°C) | −50 |
| Thermal Shock Range (°C) | −50 to +150 |
| Temperature Stability (°C) | ±2 |
| Heating Rate (°C/min) | 10 |
| Cooling Rate (°C/min) | 10 |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000–20,000 (FOB) |
| Load Capacity | 25–1000 kg |
| Frequency Range | 5–80 Hz |
| Maximum Displacement | 5–10 mm peak-to-peak |
| Maximum Acceleration | 100 m/s² |
| Drive Power | 1.5–11 kW |
| Input Voltage | AC 220 V ±10% or AC 380 V ±10% |
| Table Dimensions | 40×40 to 140×140 cm |
| Weight | 500–3600 kg |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -40°C to +150°C (configurable models) |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±2.0°C |
| Humidity Uniformity | ±3.0% RH |
| Temperature Fluctuation | ±0.5°C |
| Humidity Fluctuation | ±2.5% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Internal Volume | 80 L / 150 L / 252 L |
| Insulation | Rigid polyurethane foam + fiberglass dual-layer |
| Refrigerant | R404A/R23 (ODP = 0) |
| Controller | 7-inch TFT color LCD touch screen, bilingual (EN/CN), programmable up to 250 cycles / 12,500 segments |
| Data Logging | 250-day history storage, USB/RS-232 interface, Excel-compatible export |
| Safety Features | Dual-layer structure, over-temperature/humidity/pressure/leakage protection, electrical isolation of water and power circuits |
| Compliance | GB11158, GB10589, GB10592, GB/T10586, GB/T2423.1–2423.4, GB/T2423.22, IEC60068-2-1 & -2-2, GJB150.3/4/9 |
| Brand | OK |
|---|---|
| Model | OK-HAST-25 / OK-HAST-35 |
| Internal Dimensions | Ø250×450 mm (OK-HAST-25) / Ø350×500 mm (OK-HAST-35) |
| Temperature Range | RT+10°C to 132°C |
| Humidity Range | 75–100% RH |
| Pressure Range | 0.0–2.8 kg/cm² (gauge), max capacity 4.0 kg/cm² |
| Temperature Uniformity | ±1.5°C |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Pressurization Time (0→2.0 kg/cm²) | ~30 min |
| Inner Chamber Material | SUS304 stainless steel |
| Outer Chamber Material | SECC steel with electrostatic powder coating |
| Compliance | Designed for JEDEC JESD22-A110, JESD22-A118, and IEC 60068-2-66 test protocols |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions (Ø×H) | Φ250×300 mm to Φ650×600 mm |
| External Dimensions (W×H×D) | 500×500×700 mm to 950×900×1100 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Steam Pressure Range | 0.0–2.0 kg/cm² (gauge) above ambient atmospheric pressure (3.0 kg/cm² optional) |
| Circulation Method | Forced steam convection |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Features | Dual overheat protection, mechanical door interlock, pressure relief valve, low-water cutoff, automatic steam purging, ABS insulated door handle, seamless silicone door gasket |
| Accessories | Two stainless-steel adjustable shelves |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions (D×H) | Φ250×300 mm to Φ650×600 mm |
| External Dimensions (W×H×D) | 500×500×700 mm to 950×900×1100 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Steam Pressure Range | 0–2.0 kg/cm² (gauge), up to 3.0 kg/cm² on special order |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Features | Dual overheat protection, automatic water replenishment, pressure relief valve, interlocked door switch, low-water cutoff, manual/automatic pressure release |
| Standard Accessories | Two stainless-steel shelf trays |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions (D×H) | Φ250×300 mm to Φ650×600 mm |
| External Dimensions (W×H×D) | 500×500×700 mm to 950×900×1100 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Steam Pressure Range | 0–2.0 kg/cm² (gauge) above ambient (3.0 kg/cm² optional) |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Features | Dual overheat protection, door interlock, pressure relief valve, low-water cutoff, automatic steam purging, auto-refill system |
| Brand | OK |
|---|---|
| Model | OK-HAST-25 / OK-HAST-35 / OK-HAST-45 / OK-HAST-65 |
| Temperature Range | 105–135 °C (143 °C optional) |
| Humidity Range | 70–100 % RH |
| Pressure Range | 0.0–2.0 kg/cm² (gauge), relative to ambient atmospheric pressure |
| Internal Dimensions (Ø × D) | Φ250×300 mm to Φ650×600 mm |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Features | Dual overheat protection, mechanical interlock door switch, pressure relief valve, low-water cutoff, automatic补水 & depressurization |
| Construction | Electropolished stainless steel chamber interior, one-piece silicone door gasket, ABS safety door cover |
| Compliance | Designed for JEDEC JESD22-A102 (HAST), JESD22-A110, and IEC 60068-2-66 test protocols |
| Brand | OK |
|---|---|
| Model | HC-900 |
| Type | Ingress Protection (IP) Sand and Dust Test Chamber |
| Internal Dimensions | 900 × 900 × 900 mm (W×H×D) |
| External Dimensions | 1550 × 1800 × 1300 mm (W×H×D) |
| Weight | 320 kg |
| Temperature Range | 20 °C ±15 °C |
| Humidity Range | 45–85 %RH |
| Dust Concentration Options | F1: 60,000 mg/m³ |
| F2 | 3,000 mg/m³ |
| F3 | 100 mg/m³ |
| C1 (Flowing Dust) | 5,000 mg/m³ at 5 m/s |
| C2 (Flowing Dust) | 100 mg/m³ at 5 m/s |
| Test Duration | 0–99 hr (time control), 0–999 sec (cycle control) |
| Power Supply | 220 V AC, single-phase, 5 kW |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/h |
| Adjustable Air Exchange Time | 1 min–99 h |
| Internal Chamber Dimensions (mm) | 450×450×500 to 800×1000×1000 |
| Power Consumption | 4.0–9.0 kW |
| Rotating Turntable Diameter | Φ250–Φ700 mm |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB, VDE, JIS, IEC |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour (measurable per JIS K 7212 at 80°C) |
| Air Exchange Timer | 1 min – 99 h adjustable |
| Internal Chamber Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| Power Consumption | 4.0–9.0 kW |
| Rotating Turntable Diameter | Φ250–Φ700 mm |
| Control System | PID + SSR Microprocessor Controller with LED Display |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-05, UL 1581, IEC 60811, GB/T 2951, JIS C 3005, VDE 0472 |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Time | 1 min – 99 h |
| Internal Chamber Material | SUS304 Stainless Steel |
| External Cabinet Material | A3 Steel with Powder Coating |
| Insulation | High-Density Glass Fiber Mat |
| Viewing Window | Tempered Glass with LED Illumination |
| Test Port | Ø50 mm (left side) |
| Rotating Turntable Diameter | Ø250–Ø700 mm (model-dependent) |
| Power Rating | 4.0–9.0 kW (model-dependent) |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB/T 2951, IEC 60811, JIS C 3005, VDE 0472 |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB, approximate) |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Interval | 1 min – 99 h |
| Internal Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| Power Consumption | 4.0–9.0 kW |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB/T 2951, IEC 60811, JIS C 3005, VDE 0472 |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Stability | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Time | 1 min – 99 h |
| Internal Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| Power Rating | 4.0–9.0 kW |
| Rotating Turntable Diameter | Φ250–Φ700 mm |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB/T 2951, IEC 60811, JIS C 3005, VDE 0472 |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Time | 1 min – 99 h |
| Internal Chamber Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| Power Rating | 4.0–9.0 kW |
| Controller | PID + SSR Microcomputer Digital Controller |
| Display Resolution | 0.1°C (Set/Read) |
| Timer Range | 1–9999 min |
| Turntable Diameter | Φ250–Φ700 mm |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93(2005), UL 1581, GB/T 2423.2, IEC 60068-2-2, JIS C 0068, VDE 0470 |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/h (measured at 80°C) |
| Air Exchange Timer | 1 min – 99 h adjustable |
| Power Rating | 4.0–9.0 kW (model-dependent) |
| Internal Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93(2005), UL 1581, IEC 60811, JIS K7212, GB/T 2951, VDE 0472 |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Temperature Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/hour |
| Adjustable Air Exchange Time | 1 min – 99 h |
| Internal Chamber Dimensions (L×W×H, mm) | 450×450×500 to 800×1000×1000 |
| Power Rating | 4.0–9.0 kW |
| Controller | PID + SSR Microcomputer Digital Controller |
| Temperature Setting/Display Resolution | 0.1°C |
| Timer Range | 1–9999 min |
| Rotating Turntable Diameter | Φ250–Φ700 mm |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB/T, JIS, IEC, VDE |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -10 °C to 80 °C (standard), optional down to -20 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Rainfall Intensity | 25 mm/h |
| Nozzle Orifice Diameter | φ0.4 mm |
| Droplet Diameter | 1.0–1.5 mm |
| Ice Accumulation Thickness Options | 6 mm, 13 mm, 37 mm, 75 mm |
| Ice Density Range | 0.2–0.9 g/cm³ |
| Water Temperature Control | 0–5 °C |
| Inner Chamber Material | SUS304 Stainless Steel |
| Outer Chamber Material | Galvanized Steel with Powder Coating or Optional SUS304 |
| Refrigeration System | Hermetic Scroll Compressor (French/Tecumseh) |
| Controller | 5.7″ TFT Color LCD Touchscreen (Bilingual English/Chinese) |
| Power Supply | AC 220 V ±5%, 50 Hz ±0.5 Hz, Single-Phase Three-Wire |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -20 °C to 80 °C (customizable) |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Rainfall Intensity | 25 mm/h |
| Nozzle Orifice Diameter | φ0.4 mm |
| Raindrop Diameter | 1.0–1.5 mm |
| Ice Accumulation Thickness Options | 6 mm, 13 mm, 37 mm, 75 mm |
| Ice Density Range | 0.2–0.9 g/cm³ |
| Water Temperature Control | 0–5 °C |
| Internal Chamber Materials | SUS#304 Stainless Steel |
| External Cabinet | Galvanized Steel with Powder Coating or Optional SUS304 |
| Refrigeration System | Hermetic Scroll Compressor (French/Tecumseh) |
| Controller | 5.7″ TFT Color LCD Touchscreen (Bilingual English/Chinese) |
| Power Supply | AC 220 V ±5%, 50 Hz ±0.5 Hz, Single-Phase Three-Wire |
| Brand | OK |
|---|---|
| Model | OK-PCT-25 / OK-PCT-30 / OK-PCT-40 / OK-PCT-50 |
| Chamber Dimensions (mm) | Ø250×400 |
| Temperature Range | 100–132 °C |
| Pressure Capability | Up to 300 kPa (approx. 3 kg/cm²) |
| Compliance | Designed for IEC 60068-2-66, JESD22-A102D, MIL-STD-202G Method 108, JEDEC JESD22-A110 |
| Safety Restrictions | Not for flammable, explosive, volatile, corrosive, or high-EMI-emitting samples |
| Power Preheat Time | 30–35 min to target pressure |
| Automatic Pressure Release & Cooling Protocol | ≥20 min post-depressurization before sample retrieval |
| Control Interface | Programmable digital controller with dual-stage cycle logic (Program A: Work → Dry → Exhaust → Zero-Pressure Completion |
| Program B | Work → Completion with residual pressure) |
| Data Logging | Optional real-time temperature/pressure trace recording |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Internal Dimensions (Φ×D) | 30×45 cm to 60×65 cm |
| Temperature Range | 121 °C, 132 °C (143 °C optional) |
| Humidity | 100 % RH (saturated steam) |
| Absolute Pressure Range | 101.3 kPa (ambient) to 304 kPa (2.0 kg/cm² gauge |
| Temp. Uniformity | ≤ ±2 °C |
| Humidity Uniformity | ≤ ±3 % RH |
| Heating Method | Saturated steam generation via electric immersion heater |
| Safety Systems | Low-water cutoff, overpressure relief valve, overtemperature cutout, auto-locking pressure-interlocked door, real-time pressure/temperature monitoring |
| Brand | OK |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,950 (FOB) |
| Internal Dimensions (Φ×D, cm) | 30×45 |
| Temperature Range | 121 °C, 132 °C (143 °C optional) |
| Saturation Humidity | 100 % RH |
| Operating Pressure (absolute) | 101.3 kPa (1 atm) to 302 kPa (2.0 kg/cm² |
| Temperature Uniformity | ≤ ±2 °C |
| Humidity Uniformity | ≤ ±3 % RH |
| Safety Systems | Low-water cutoff, overpressure relief valve, overtemperature cutout, interlocked pressure-actuated door lock, automatic补水 and pressure-synchronized door sealing |
| Power Supply | AC 220 V ±5 %, 50 Hz ±0.5 Hz |