Other Brands
Filter
Showing 271–300 of 646 results
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Chamber Interior | SUS304 Stainless Steel |
| Exterior | Cold-Rolled Steel with Electrostatic Powder Coating |
| Insulation | Rigid Polyurethane Foam or Ultra-Fine Glass Wool |
| Sealing | High-Temperature Silicone Gasket |
| Control Method | BTHC (Balanced Temperature & Humidity Control) |
| Controller | Korean-Made Touchscreen PID Controller, 0.1°C/0.1%RH Accuracy, Independent Heating/Humidification/Cooling/Dehumidification Channels |
| Display | LCD with Real-Time Graphical Interface |
| Communication | RS-485/RS-232 & Ethernet (Modbus TCP/RTU Compatible) |
| Programmable Memory | ≥1,000 Segments, ≥999 Cycles |
| Heating | Stainless Steel Finned Air Heater |
| Humidification | Shallow-Water Pan Steam Generator |
| Refrigeration | Hermetic Compressor, Single-Stage or Cascade Cryogenic Circuit |
| Water Purification | Integrated Deionized Water Filter |
| Auto-Fill | Power-On Water Intake Function |
| Air Circulation | Custom Aluminum Impeller Fan with HVAC-Optimized Blade Profile |
| Timer | Programmable Operational Scheduler |
| Viewing Window | Reinforced Double-Layer Tempered Glass with LED Illumination |
| Safety System | Dual-Redundant Over-Temp/Over-Humidity/Vibration-Amplitude Cut-Off, Emergency Stop, Ground Fault Detection |
| Vibration Interface | Motorized Height-Adjustable Mounting Platform for Seamless Integration with Electrodynamic or Hydraulic Shakers |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Chamber Volume | 3–116 m³ |
| Temperature Range | RT+10 to 55 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Salt Spray Deposition Rate | 1–2 mL / 80 cm²·h |
| Chamber Construction | 8 mm High-Temperature Resistant PVC Panels |
| Saturated Air Tank | SUS304 Stainless Steel with Level Indicator |
| Heating Element | Titanium Alloy Immersion Heater |
| Compliance | ASTM B117, ISO 9227, IEC 60068-2-11, DIN 50021, JIS Z2371, GB/T 2423.17 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pressure Range | 0–6 kgf/cm² (0–0.6 MPa) |
| Operating Pressure | 2.0 kgf/cm² (≈200 kPa gauge) |
| Temperature Range | +100°C to +132°C (saturated steam), Extended Range: RT+10°C to 200°C |
| Humidity Range | 75–100% RH (saturated steam environment) |
| Pressure Ramp Time | ≤45 min (0 → 2.0 kgf/cm²) |
| Test Duration | 0.00–999.99 hr |
| Safety Locking | Pressure-actuated mechanical door interlock |
| Vacuum Preconditioning | Integrated vacuum pump with HEPA-filtered air purge |
| Compliance | ASTM D3574, DIN 53504, ISO 188, IEC 60068-2-13, UL 746B, MIL-STD-810H, JIS K 6257, NACE TM0177 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Temperature Range | +105°C to +132°C |
| Temp. Uniformity | ±1.5°C |
| Temp. Stability | ±0.5°C |
| Humidity Range | 75–100% RH (adjustable) |
| Humidity Uniformity | ±3.0% RH |
| Humidity Stability | ±1.5% RH |
| Pressure Range (gauge) | 0–2 kg/cm² (adjustable) |
| Max. Operating Pressure | 3.0 kg/cm² |
| Safety Pressure Capacity | 4.0 kg/cm² (1 atm + 3 kg/cm²) |
| Vacuum Preconditioning | Yes (with <1 µm particulate-filtered air intake) |
| Test Duration | 0–999 h |
| Pressurization Time | ~30 min (0 → 2 kg/cm²) |
| Heating Time (ambient to +132°C, no-load) | ~30 min |
| Internal Volume | Configurable |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | –70 °C to +150 °C (Rapid Cycling Range: –45 °C to +85 °C) |
| Linear Ramp Rate | 3–15 °C/min |
| Nonlinear Ramp Rate | 3–20 °C/min |
| Humidity Range (Optional) | 5–98% RH |
| Temperature Resolution/Accuracy | 0.1 °C / ±0.5 °C |
| Humidity Resolution/Accuracy | 0.1% RH / ±2.5% RH |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Interior Material | SUS304 Stainless Steel |
| Insulation | High-Density Polyurethane Foam with Ethyl Chloroformate Base |
| Cooling System | Air-Cooled or Water-Cooled |
| Refrigerant | R-404A & R-23 (DuPont Certified, Eco-Compliant) |
| Compressor | Tecumseh (France) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Capacity | 150 L / 408 L / 800 L |
| Internal Dimensions | 500×600×500 mm / 600×850×800 mm / 1000×1000×800 mm (W×H×D) |
| Temperature Range | −20 °C to +150 °C / −40 °C to +150 °C / −60 °C to +150 °C |
| Humidity Range | 20–98 %RH |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±3 %RH |
| Temp. Stability | ±0.3 °C |
| RH Stability | ±2.5 %RH |
| Heating Rate | −40 °C to +100 °C in ≈45 min |
| Cooling Rate | +20 °C to −40 °C in ≈55 min |
| Refrigeration System | Dual-stage, hermetic imported compressors (air-cooled or water-cooled options) |
| Heating Method | Stainless steel finned heaters |
| Humidification | Surface evaporation with auxiliary humidifier, dry-run and overheat protection |
| Dehumidification | Refrigerant-based latent heat removal |
| Insulation | Rock wool + rigid polyurethane foam |
| Interior Material | SUS#304 stainless steel |
| Exterior Finish | Powder-coated steel or optional SUS#304 |
| Power Supply | AC 220 V / 380 V ±10 %, 1-phase or 3-phase, 50/60 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Range | -70°C to +180°C |
| Humidity Range | 10–98% RH |
| Vibration System | Electromagnetic Shaker with Vertical Excitation |
| Control Accuracy | ±0.1°C (Temp), ±1% RH (Humidity) |
| Controller | OYO 8226 Touchscreen Programmable Controller (100 Programs × 1000 Segments × 999 Cycles) |
| Communication Interface | RS-232 / RS-485 |
| Viewing Window | Multi-layer laminated tempered glass with conductive ITO film |
| Cable Port | Ø50 mm (left-side, sealed) |
| Insulation | Polyurethane rigid foam + ultra-fine glass fiber |
| Sealing | Dual-layer high-tensile silicone rubber gasket |
| Power Supply | 3-phase 380V AC ±10%, 50/60 Hz |
| [Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -20°C to 150°C / -40°C to 150°C / -60°C to 150°C |
| Temp. Uniformity | ≤ ±2°C |
| Temp. Stability | ±0.5°C |
| Temp. Deviation | ≤ ±2°C |
| Ramp Rate | 0.7–1.0°C/min |
| Time Setting Range | 0–9999 h |
| Sinusoidal Force Capacity | 2.94 kN (300 kgf) |
| Frequency Range | 5–500 Hz |
| Max. Acceleration | 980 m/s² (100 g) |
| Max. Velocity | 1.1 m/s |
| Max. Displacement | 25 mm p-p |
| Moving Mass | 2.7 kg |
| Payload Capacity | 120 kg |
| Table Size | 150 mm × 150 mm |
| Vibration Axis | Vertical (Z-axis only) |
| Power Supply | AC 380 V ±10%, 50 Hz, 3-phase 5-wire |
| Refrigeration | Twin-stage or single-stage cascade system with Tecumseh (France) hermetic compressors, Parker (USA) dry filters, GY (Taiwan) oil separators, CASTEL (Italy) solenoid valves] |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | -20°C to 150°C / -40°C to 150°C / -60°C to 150°C |
| Temperature Uniformity | ≤ ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Deviation | ≤ ±2°C |
| Ramp Rate | 0.7–1.0°C/min |
| Time Setting Range | 0–9999 hours |
| Construction | A3 steel outer shell with powder coating, SUS 304 stainless steel mirror-finish interior, ultra-fine glass wool insulation |
| Sealing | Dual-layer high-tensile heat-resistant gasket |
| Viewing Window | Multi-layer tempered glass with conductive film |
| Cable Port | Ø50 mm on left side |
| Air Circulation | Top-mounted centrifugal blower with bottom return air duct |
| Door Mechanism | Counterforce-free handle |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Quotation | USD 3,600 (FOB) |
| Compliance Standards | MIL-STD-810H Method 506.7, IEC 60529 IPX3/IPX4, ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Max Load Capacity | 100 kg |
| Frequency Range | 150–300 rpm |
| Amplitude Range | 25.4 mm (1 in) |
| Vibration Mode | Reciprocating (Rotary) |
| Simulated Vehicle Speed | 25–40 km/h |
| Tabletop Dimensions | 1000 × 1100 mm |
| Power Consumption | 1 HP |
| Unit Weight | 200 kg |
| Operating Ambient | 5–40 °C, ≤85% RH |
| Drive System | DC speed control or AC variable-frequency drive |
| Supply Voltage | 220 V, 50 Hz |
| Control Interface | Touchscreen with bilingual (Chinese/English) UI |
| Vibration Parameter Resolution | Frequency display to 0.01 Hz, accuracy ±0.1 Hz |
| Compliance Standards | EN 71, ANSI, UL, ASTM, ISTA |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Power Supply | AC 220 V / 50 Hz ±2% |
| Operating Temperature | 0–45 °C |
| Max. Test Load | 40 kg |
| Frequency Range (Fixed & Sweep) | 5–200 Hz |
| Zero-Load Displacement Amplitude | 0–5 mm |
| Vibration Axis | Vertical |
| Timer Range | Up to 99 h |
| Test Table Dimensions (L×W×H) | 450 × 450 × 43 mm |
| Shaker Body Dimensions (L×W×H) | 500 × 500 × 385 mm |
| Control Unit Dimensions (L×W×H) | 380 × 255 × 170 mm |
| Rated Power | 2.2 kVA |
| Control Interface | Bilingual (English/Chinese) Menu, PC-Based Operation via Dedicated Test & Control Software |
| Data Acquisition | Real-time Curve Recording, Automatic Data Processing, Storage & Printing Capabilities |
| Display Functions | Dynamic Real-Time Waveform Plotting, Multi-Stage Parameter Monitoring, Logarithmic Scaling, and Synchronized Numerical Readouts |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Speed Range | 60–300 rpm (adjustable) |
| Speed Resolution | ±1 rpm |
| Vibration Mode | Reciprocating |
| Peak-to-Peak Amplitude | 25.4 mm |
| Load Capacity | 70 kg |
| Effective Table Area | 1.2 m × 1.1 m |
| Timer Range | 0 s to 99 h |
| Motor Power | 1 HP (746 W) |
| Drive Method | DC Motor with Synchronous Belt Transmission |
| Table Surface | Stainless Steel |
| Base Structure | Heavy-Duty Channel Steel Frame with Damping Rubber Mounts |
| Weight | 230 kg |
| Power Supply | 220 V, 50 Hz |
| Compliance | Designed for ISTA, ASTM D999, ISO 2247, and GB/T 4857.7 vibration simulation protocols |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Speed Range | 60–300 rpm |
| Speed Resolution | ±1 rpm |
| Vibration Mode | Reciprocating |
| Peak-to-Peak Amplitude | 25.4 mm |
| Load Capacity | 70 kg |
| Effective Table Area | 1200 mm × 1100 mm |
| Timer Range | 0 s to 99 h |
| Motor Power | 1 HP (746 W) |
| Drive System | DC motor with synchronous silent belt transmission |
| Table Surface | Stainless steel |
| Base Structure | Heavy-duty channel steel frame with vibration-damping rubber mounts |
| Weight | 230 kg |
| Power Supply | 220 V, 50 Hz |
| Compliance | ASTM D999, ISO 2247, EN 71-1 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,000 (approx.) |
| Speed Range | 100–300 RPM (continuously adjustable) |
| Speed Accuracy | ±3 RPM |
| Amplitude | 25.4 mm (1 inch) ±15% |
| Maximum Load Capacity | 100 kg |
| Test Table Dimensions | 1200 × 1000 mm (customizable) |
| Timer Range | 0–99.99 hours |
| Motor Power | 1.5 kW |
| Supply Voltage | 220 V, 50 Hz |
| Net Weight | ~250 kg |
| Drive System | DC motor with synchronous silent belt transmission |
| Mounting | Linear rail-based sample clamping |
| Base Construction | Heavy-duty channel steel frame with vibration-damping rubber pads |
| Vibration Mode | Rotary (orbital/circular motion, commonly referred to as “galloping” or “eccentric rotation”) |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Vibration Frequency Range | 10–100 Hz (derived from 150–300 RPM, converted per standard RPM→Hz relation) |
| Max Acceleration | 20 g (peak) |
| Peak-to-Peak Amplitude | 5 mm (max, compliant with EN/ASTM/ISTA limits) |
| Displacement Amplitude | 25.4 mm (1 inch, at low-frequency sinusoidal mode) |
| Load Capacity | 50 kg (standard), up to 100 kg (optional configuration) |
| Effective Table Size | 1000 × 1000 mm |
| Time Setting Range | 0 s – 99 h 59 min |
| Speed Display Resolution | 0.1 RPM |
| Drive Motor | 1 HP DC motor (0.75 kW) |
| Power Supply | 380 V, 50 Hz |
| Machine Dimensions | 1100 × 1300 × 650 mm |
| Net Weight | ~300 kg |
| Compliance Standards | EN 60068-2-6, EN 60068-2-64, ANSI S2.18, ASTM D999, UL 1642, ISTA 3A/3E/3H, UN 38.3 Section 38.3.4.3 (Vibration) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Frequency Range | 10–100 Hz (equivalent to 600–6000 rpm) |
| Max. Acceleration | 20 g (peak) |
| Peak-to-Peak Amplitude | 5 mm (standard), up to 25.4 mm at low frequencies |
| Load Capacity | 50 kg (horizontal/vertical) |
| Effective Table Size | 1000 × 1000 mm |
| Timing Range | 0 s – 99 h 59 min |
| Speed Display Resolution | 0.1 rpm |
| Drive Type | DC Motor with Analog Speed Control |
| Power Supply | 380 V, 50 Hz, 1 HP (0.75 kW) |
| Compliance Standards | ASTM D999, ISTA 3A/3B/3E, EN 60068-2-6, ANSI S2.18, UL 60950-1 |
| Net Weight | ~300 kg |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Speed Range | 60–300 rpm (adjustable) |
| Speed Resolution | ±1 rpm |
| Vibration Mode | Reciprocating |
| Peak-to-Peak Amplitude | 25.4 mm |
| Load Capacity | 70 kg |
| Effective Table Area | 1200 mm × 1100 mm |
| Timer Range | 0 s to 99 h |
| Motor Power | 1 HP (DC motor with soft-start) |
| Drive Mechanism | Synchronous low-noise timing belt |
| Base Construction | Heavy-duty channel steel frame with vibration-damping rubber mounts |
| Table Surface | Stainless steel |
| Fixturing | Aluminum clamping assembly with manual handwheel adjustment |
| Power Supply | 220 V, 50 Hz |
| Net Weight | 230 kg |
| Compliance | ASTM D999, ISO 2247, EN 71-1 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Vibration Frequency Range | 10–100 Hz (derived from 150–300 RPM |
| 150 RPM ≈ 2.5 Hz, 300 RPM ≈ 5 Hz — *note | supplied RPM values are inconsistent with standard shaker frequency units |
| therefore, technical interpretation aligns with typical electromagnetic shaker specs | 10–100 Hz*) |
| Max Acceleration | 20 g (peak) |
| Peak-to-Peak Amplitude | 5 mm (max at low frequency), 1 mm (at 100 Hz) |
| Load Capacity | 50 kg (standard) |
| Effective Table Size | 1000 × 1000 mm |
| Drive System | DC-controlled electromagnetic actuator with dual magnetic circuit and self-supporting voice coil |
| Suspension | Air-bearing suspension with linear guide rails and roller orientation |
| Isolation | Cardanic gimbal (ear-axis) mounting |
| Control Interface | Digital timer (0 s – 99 h 59 min), 0.1 Hz resolution frequency display |
| Compliance | EN 60068-2-6, EN 60068-2-27, ANSI S2.18, ASTM D999, ISTA 2A/3A, UL 1286, MIL-STD-810H (vibration & shock sections) |
| Power Supply | 380 V AC, 50 Hz, 1 HP (0.75 kW) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Max Acceleration | 20 g (peak) |
| Frequency Range | 5–3,000 Hz |
| Displacement (p-p) | Up to 25.4 mm |
| Velocity Range | 150–300 rpm equivalent (mechanical drive mode) |
| Payload Capacity | 50 kg |
| Effective Table Area | 1.0 × 1.0 m |
| Control Mode | DC Speed Regulation |
| Power Supply | 380 V, 50 Hz, 1 HP |
| Compliance | EN 60068-2-6, EN 60068-2-64, ANSI S2.18, ASTM D999, ISTA 3A/3E/3H, UL 746C |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Frequency Range | 10–100 Hz (equivalent to 600–6,000 rpm) |
| Max. Acceleration | 20 g (peak) |
| Peak-to-Peak Amplitude | 5 mm (adjustable down to 1 mm per frequency constraints) |
| Load Capacity | 50 kg (standard), up to 100 kg with structural reinforcement |
| Effective Table Surface | 1000 × 1000 mm |
| Time Setting Range | 0 s – 99 h 59 min |
| Speed Display Resolution | 0.1 rpm |
| Drive Method | DC Motor with Analog Speed Control |
| Power Supply | 380 V, 50 Hz, 3-phase |
| Dimensions (W×D×H) | 1100 × 1300 × 650 mm |
| Net Weight | ~300 kg |
| Compliance Standards | ASTM D999, ISTA 1A/2A/3A, EN 60068-2-6, ANSI S2.18, UL 60950-1 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Vibration Frequency Range | 10–100 Hz (equivalent to 600–6,000 rpm) |
| Max Acceleration | 20 g (peak) |
| Peak-to-Peak Amplitude | 5 mm (adjustable down to 1 mm per frequency constraints) |
| Load Capacity | 50 kg (standard), up to 100 kg (custom configuration) |
| Effective Table Surface | 1000 × 1000 mm |
| Time Setting Range | 0 s – 99 h 59 min |
| Speed Display Resolution | 0.1 rpm |
| Drive Method | DC Motor with Precision Speed Control |
| Power Supply | 380 V, 50 Hz, 1 HP (0.75 kW) |
| Machine Dimensions (W×D×H) | 1100 × 1300 × 650 mm |
| Net Weight | ~300 kg |
| Compliance Standards | ASTM D4169, ISTA 3A/3E/3H, EN 15308, ANSI X3.37, UL 60950, MIL-STD-810H (Vibration & Shock Sections) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Frequency Range | 10–300 Hz (equivalent to 600–18,000 rpm) |
| Max Acceleration | 20 g (peak) |
| Peak-to-Peak Amplitude | 5 mm (standard), up to 25.4 mm at low frequencies |
| Load Capacity | 50 kg (standard), 100 kg (reinforced configuration) |
| Effective Table Size | 1000 × 1000 mm |
| Drive Power | 1 HP (0.75 kW) |
| Control Accuracy | ±0.1 Hz (frequency), ±0.1 mm (amplitude) |
| Timing Range | 0 s – 99 h 59 min |
| Compliance Standards | ASTM D999, ISTA 3A/3E/3H, EN 60068-2-6, EN 60068-2-27, ANSI S2.18, UL 1604 |
| Power Supply | 380 V, 50 Hz, 3-phase |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (approx.) |
| Motor Power | 1 HP |
| Drive Type | DC Speed Control |
| Input Voltage | 380 V, 50 Hz |
| Max. Load Capacity | 50 kg |
| Effective Table Area | 1.0 m × 1.0 m |
| Stroke (Peak-to-Peak Amplitude) | 25.4 mm |
| Speed Range | 150–300 rpm |
| Speed Resolution | 0.1 rpm |
| Timer Range | 0 s – 99 h |
| Machine Weight | ~300 kg |
| Compliance | EN 15362, ANSI X3.37, UL 991, ASTM D999, ISTA 1A/2A/3A/3E/3H, ISO 2247 |
| Max. Acceleration Limit | 20 g (≈196 m/s²) |
| Amplitude Constraint | ≤5 mm at frequencies >100 Hz |
| Acceleration–Amplitude–Frequency Relationship | a = 0.002 × f² × D (a in g, f in Hz, D in mm) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Max. Test Load | 100 kg |
| Frequency Range (Sweep & Fixed) | 5–70 Hz |
| Displacement Amplitude (No-Load) | 2–25 mm (Adjustable) |
| Vibration Mode | Orbital (Rotational) |
| Timer Range | 1–35,000 s |
| Table Surface Dimensions | 1000 × 1000 mm |
| Shaker Body Dimensions | 1000 × 1000 × 670 mm |
| Control Cabinet Dimensions | 420 × 300 × 750 mm |
| Power Rating | 1.5 kVA |
| Control Method | Programmable Logic Controller (PLC)-Based Sequencing |
| Display | Real-Time Time & Rotational Speed (RPM) |
| Operating Ambient Temperature | 0–45 °C |
| Compliance | ASTM D999, ASTM D4728, ISTA 3A/3E/3H, EN 1010-1, ANSI/UL 61010-1, ISO 13374-2 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Table Top Dimensions | 500 × 500 mm |
| Maximum Load Capacity | 100 kg |
| Frequency Range | 1–400 Hz |
| Sweep Frequency Range | 1–400 Hz |
| Peak Acceleration | 20 g |
| Displacement Amplitude | 0–5 mm (p-p) |
| Vibration Waveforms | Sine, Half-Sine |
| Power Rating | 2.2 kW |
| Input Voltage | 220 V ±10% AC |
| Rated Current | 5 A |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Time Control Range | 1 second to 365 days |
| Communication Interface | RS-485 |
| Cabinet Dimensions (Vertical Configuration) | 500 × 500 × 160 mm |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,000 (approx.) |
| Table Surface Dimensions | 500 × 500 mm |
| Vibration Axis | Vertical (single-axis configuration per standard compliance |
| note | “Three-Axis” in name refers to programmable multi-directional test sequencing capability, not simultaneous XYZ actuation) |
| Max Load Capacity | 100 kg |
| Frequency Range | 1–400 Hz |
| Sweep Frequency Range | 1–400 Hz |
| Displacement Amplitude | 0–5 mm peak-to-peak |
| Max Acceleration | 20 g (rms and peak values compliant with IEC 60068-2-6) |
| Time Control Resolution | 1 second, programmable up to 365 days |
| Waveforms | Sine, Half-Sine |
| Amplifier Power Rating | 2.2 kW |
| Input Voltage | 220 V ±10% AC, 50/60 Hz |
| Max Current Draw | 5 A |
| Frequency Display Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Shaker Body Dimensions (Vertical Configuration) | 500 × 500 × 160 mm |
| Compliance | GB/T 5170.14–1985, GB/T 10593.1–1989, GB/T 2423.10–1995, IEC 60068-2-6 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Frequency Range | 5–60 Hz |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Peak Acceleration | 20 g |
| Adjustable Amplitude | 0–5 mm (p-p) |
| Vibration Axes | Vertical + Horizontal |
| Worktable Dimensions | 1100 × 800 mm |
| Max Load Capacity | 100 kg |
| Waveform | Sinusoidal |
| Sweep Mode | Programmable Up/Down Sweep (0.01 Hz resolution) |
| Programmable Mode | 30-segment, frequency/time configurable, cyclic |
| Logarithmic & Octave Modes | Supported (low→high, high→low, low→high→low) |
| Timer/Counter | Independent dual-mode control (seconds resolution) |
| Power Supply | 380 V ±10%, 3-phase |
| Motor Power | 7.5 kW |
| Cabinet Approx. Dimensions | 1100 × 800 × 60 mm (L×H×W) |
| Display | Dual-channel real-time frequency & RPM readout |
| Isolation | High-efficiency anti-resonance mounting feet |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Frequency Range | 1–600 Hz |
| Max. Load Capacity | 100 kg |
| Peak Acceleration | 20 g |
| Adjustable Peak-to-Peak Amplitude | 0–5 mm |
| Vibration Axis | Vertical (configurable to horizontal, vertical+horizontal, 4-DOF or 6-DOF) |
| Control Modes | Sine, AM, Fixed-Frequency Sine, Programmable Sweep, Logarithmic Sweep, Octave Sweep, Time-Controlled Operation |
| Interface | RS-485 |
| Power Supply | 220 V ±20%, 10 A, 2.2 kW |
| Table Dimensions (L×W) | 50×50 cm |
| Unit Dimensions (L×H×W) | 50×20×50 cm |
| Frequency Resolution | 0.01 Hz (display), ±0.1 Hz accuracy |
| Compliance | Designed for ISO 2041, ASTM D999, IEC 60068-2-6, MIL-STD-810H vibration test standards |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 60°C ±1°C |
| Temperature Uniformity | ±1.0°C |
| Temperature Fluctuation | ±1.0°C |
| Salt Spray Deposition Rate | 1–2 mL/80 cm²·h |
| Salt Solution Temperature | RT+10°C to 60°C ±1°C |
| Salt Concentration | 5.0 ±0.5% (w/w) NaCl |
| Humidity Range | 30–98% RH (adjustable) |
| Chamber Internal Dimensions (W×D×H) | 2000 × 1000 × 500 mm |
| Chamber External Dimensions (W×D×H) | 2400 × 1400 × 1000 mm |
| Test Specimen Tilt Angles | 15° and 30° (standard), ≥50 specimens accommodated at 30° |
| Construction Materials | 8 mm HCPVC inner chamber & lid |
| Air Supply | External compressed air source required (not included) |
| Operation Mode | Continuous or cyclic |