Other Brands
Filter
Showing 391–420 of 646 results
| Brand | Other Brands |
|---|---|
| Model | OK-TS–100 / OK-TS–250 / OK-TS–500 / OK-TS–1000 |
| Temperature Range | –70 °C to +150 °C (selectable) |
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Ramp Rate | ≥2–3 °C/min (heat-up), ≤1 °C/min (cool-down) |
| Interior Material | Stainless Steel (AISI 304) |
| Exterior Material | Powder-Coated Baosteel Cold-Rolled Steel |
| Insulation | High-Density Ultra-Fine Glass Fiber |
| Heating System | Nickel-Chromium Alloy Heaters |
| Cooling System | Finned Multi-Stage Evaporator with Single- or Dual-Stage (Cascade) Refrigeration |
| Compressor | Hermetic Tecumseh/Tecumseh-derived “Tecumseh” (France-sourced) |
| Air Circulation | Single-Circuit, Extended-Shaft Low-Noise Stainless Steel Centrifugal Blower |
| Sealing | High-Performance Silicone Rubber Gasket |
| Viewing Window | Double-Layer Tempered Glass with Interior LED Illumination |
| Control System | Imported High-Precision Digital Display Controller with PID Algorithm and Imported Actuators |
| Compliance | Designed per IEC 60068-2-14, ASTM D5229/D5229M, MIL-STD-810H Method 503.7 |
| Brand | Other Brands |
|---|---|
| Model | OKPZ-50 / OKPZ-100 / OKPZ-200 / OKPZ-300 / OKPZ-500 |
| Application | Lithium-ion battery mechanical safety testing per UN 38.3, IEC 62133, GB/T 31241 |
| Impact waveform | Half-sine, trapezoidal, rear-peak sawtooth (user-selectable) |
| Peak acceleration range | 25–1200 m/s² (model-dependent) |
| Pulse duration | 1.5–25 ms |
| Drop height range | 0–200 mm |
| Collision frequency | 1–120 impacts/min |
| Table dimensions | 500×700 mm to 1000×1000 mm |
| Rated load capacity | 50–500 kg |
| Power supply | AC 220 V ±5%, 50 Hz ±0.5 Hz, single-phase three-wire |
| Operating air pressure | 7–8 kg/cm² |
| Compliance | MIL-STD-810G Method 516.6, IEC 60068-2-29, GB/T 2423.5–2022, GB/T 2423.6–2022, GJB 150.18A–2012, GJB 360B–2009 |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 4,100 (FOB) |
| Temperature Range | +100 °C to +132 °C (saturated steam) |
| Humidity | 100% RH (steam-saturated) |
| Operating Pressure | 1.5–3.2 kgf/cm² |
| Max Internal Pressure Rating | 4.0 kgf/cm² |
| Pressure Ramp Time (to 1.04 kgf/cm²) | ~45 min |
| Time Setting Range | 000–999 h |
| Temp. Uniformity | ±0.5 °C |
| Temp. Resolution | 0.1 °C |
| Pressure Uniformity | ±0.2 kgf/cm² |
| Programmable Steps | 100 segments per program × 10 programs |
| Cycle Repetition | up to 999 loops |
| Power Supply Interface | One 50 mm test port (left side) with plug |
| Construction | Interior & exterior SUS#304 stainless steel |
| Insulation | High-density fire-retardant PU foam |
| Anti-sweat System | K-type thermocouple heat tracing + film-type heating wires |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +110°C to +132°C |
| Temperature Uniformity | ±1.5°C |
| Temperature Stability | ±0.5°C |
| Humidity Range | 100% RH (Saturated Steam) |
| Humidity Uniformity | ±3.0% RH |
| Humidity Stability | ±1.5% RH |
| Pressure Range (Gauge) | 0–2 kg/cm² (Optional: 0–4 kg/cm²) |
| Absolute Pressure Range | 1.0–3.0 kg/cm² |
| Maximum Safety Pressure Capacity | 4 kg/cm² (1 atm + 3 kg/cm²) |
| Ramp Time (Ambient to 132°C, unloaded) | ~30 min |
| Pressurization Time (0 → 2 kg/cm²) | ~30 min |
| Test Duration Setting | 0–999 hours |
| Circulation Method | Natural Convection of Saturated Steam |
| Compliance | GB/T 10586–1989, GB/T 2423.3–2016 (IEC 60068-2-3), MIL-STD-810D Method 502.2, GJB 150.9A–2009, GB/T 2423.34–2012 (IEC 60068-2-52), MIL-STD-883C Method 1004.2 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,050 (approx. ¥29,000) |
| Temperature Range | 110°C / 132°C (saturated steam) |
| Humidity | 100% RH (saturated) |
| Pressure Range | 0.5–2.0 kg/cm² (max safety capacity: 3.5 kg/cm²) |
| Time Setting Range | 0–999 h |
| Temperature Uniformity | ±2.0°C |
| Heating Time | ≤35 min (RT to 132°C at control point) |
| Pressurization Time | ≤40 min (0 → 2.0 kg/cm² at control point) |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Resolution | 0.1°C |
| Control System | Microprocessor-based PID + SSR with independent saturated steam temperature/time/pressure display |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 100–132 °C |
| Humidity Range | 100 % RH (Saturated Steam) |
| Pressure Range | 0–4 kg/cm² above atmospheric pressure |
| Chamber Dimensions (Internal) | Φ25×40 cm (PCT-25) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range (Hot Zone) | +80°C to +200°C |
| Temperature Range (Cold Zone) | −10°C to −70°C |
| Operational Test Range | −40°C to +150°C |
| Temperature Control Accuracy | ±2°C |
| Temperature Resolution | 0.01°C |
| Hot Zone Ramp Rate | ≤40 min (from 25°C to 150°C) |
| Cold Zone Ramp Rate | ≤100 min (from 25°C to −70°C) |
| Test Zone Temperature Recovery Time | 3–5 min |
| Internal Dimensions (W×H×D) | 600 × 500 × 500 mm |
| External Dimensions (W×H×D) | 1500 × 2100 × 2250 mm |
| Construction | Dual-chamber (hot/cold) + test chamber |
| Inner/Outer Material | SUS#304 stainless steel (mirror-finished) |
| Insulation | High-density glass wool + rigid polyurethane (PU) foam |
| Condensation Prevention | K-type thermocouple-based anti-sweat system |
| Seals | High-tensile elastomeric packing rated for −200°C to +400°C |
| Actuation | Pneumatic hot/cold zone isolation valves |
| Accessories | Two adjustable stainless-steel test trays |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General distributor |
| Price | USD 14,000 (approx.) |
| Temperature Range | −70 °C to +170 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Temperature Recovery Time | ≤5 min |
| High-Temp Soak | ≥30 min at +150 °C |
| Low-Temp Soak | ≥30 min at −40 °C |
| Specimen Transfer Method | Pneumatic |
| Max Specimen Weight | 3 kg |
| Heating Rate | +25 °C → +170 °C in 30 min |
| Cooling Rate | +25 °C → −55 °C in 65 min |
| Noise Level | ≤65 dB(A) |
| Power Supply | AC 380 V ±10%, 50/60 Hz with protective earth |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Rapid Thermal Transition Range | −45 °C to +85 °C |
| Max. Linear Ramp Rate | 15 °C/min |
| Humidity Range (Optional) | 20–98% RH (extendable to 5–98% RH on request) |
| Temp. Resolution/Accuracy | 0.1 °C / ±0.5 °C |
| Humidity Resolution/Accuracy | 0.1% RH / ±2.5% RH |
| Uniformity | ±2.0 °C / ±3.0% RH |
| Sample Load Capacity | ≥30 kg |
| Construction | Exterior – Powder-coated carbon steel |
| Cooling Method | Air-cooled or water-cooled |
| Viewing Window | 350 × 250 mm electrically heated, anti-fog, low-emissivity coated |
| Cable Port | Sliding conduit with sealing gasket |
| Illumination | Moisture-resistant LED chamber lighting |
| Sample Shelf Drive | Pneumatic dual-acting cylinder with German indirect-type position sensor |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | -40 to 100 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±1 °C |
| Humidity Uniformity | ±5% RH |
| Ramp Rate | ~4.0 °C/min (heating), ~1.0 °C/min (cooling) |
| Construction Material | SUS304 Stainless Steel (matte finish, interior and exterior) |
| Cooling System | Air-cooled, single-stage compressor (down to -20 °C) |
| Door Configuration | Dual front-and-rear access doors |
| Shelf System | LCD-adjustable-angle fixtures |
| Load Validation Medium | Aluminum plates (not plastic) |
| Safety Protections | Fuseless circuit breaker, compressor overload protection, refrigerant high/low pressure switches, over-temperature cut-off, fuse, fault alert system |
| Insulation Material | High-density ethyl chloroformate-based polyurethane foam (heat-resistant) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -20°C to +150°C / -40°C to +150°C / -50°C to +150°C / -60°C to +150°C / -70°C to +150°C / -85°C to +150°C |
| Humidity Range | 20–98% RH |
| Temperature Stability | ±0.5°C |
| Temperature Uniformity | ±1.5°C |
| Temperature Deviation | ≤±2.0°C |
| Heating Rate (non-linear, unloaded) | -20°C to +150°C in <45 min |
| Cooling Rate (non-linear, unloaded) | +20°C to -20°C in <45 min |
| Humidity Fluctuation | ±1% RH |
| Humidity Uniformity | ±3.0% RH |
| Inner Chamber Material | Mirror-finish SUS304 stainless steel |
| Outer Chamber Material | SUS304 stainless steel or rust-inhibited cold-rolled steel with powder-coated white finish |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range (Hot Zone) | +80°C to +200°C |
| Temperature Range (Cold Zone) | −10°C to −70°C |
| Operational Test Range | −40°C to +150°C |
| Temperature Control Accuracy | ±2°C |
| Temperature Resolution | 0.01°C |
| Hot Zone Ramp Rate (RT to +150°C) | ≤40 min |
| Cold Zone Ramp Rate (RT to −70°C) | ≤100 min |
| Test Zone Temperature Recovery Time | 3–5 min |
| Internal Dimensions (W×H×D) | 600 × 500 × 500 mm |
| External Dimensions (W×H×D) | 1500 × 2100 × 2250 mm |
| Construction Material | SUS#304 Stainless Steel (Interior & Exterior) |
| Insulation | High-Density Glass Wool + Rigid Polyurethane (PU) Foam |
| Anti-Sweat System | K-Type Thermocouple-Based Thermal Compensation |
| Actuation Method | Pneumatic Dual-Zone Door Switching |
| Accessories | High-Tensile Packing (−200°C to +400°C), Dual Adjustable Test Shelves |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 12,500 (approx.) |
| Thickness Range | 0.03–99 µm |
| Potential Difference Range | −100 to +400 mV |
| Thickness Accuracy | ±10% |
| Potential Difference Accuracy | ±5% |
| Reproducibility | <5% RSD |
| Display | 4-digit LED, two decimal places |
| Temperature Control (Chamber) | 0–99.9 °C, PID-controlled, resolution ±0.3 °C |
| Saturated Air Chamber Temp | 0–99.9 °C, PID-controlled, resolution ±0.3 °C |
| Heating Tank Safety Limit | 0–120 °C |
| Saturated Air Tank Safety Limit | 0–120 °C |
| Timer Range | 9.9 s–9990 h |
| Elapsed Time Meter | 0–9999.9 h |
| Air Pressure Regulator | Precision filter included |
| Pressure Gauge | 0–2.5 kg/cm², accuracy 0.01 kg/cm² |
| Toggle Switch | Illuminated, rated for ≥20,000 actuations |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,100 (approx.) |
| Temperature Range | −40°C to +150°C (standard) |
| Humidity Range | 20%–98% RH |
| Control Accuracy | ±0.5°C / ±2.5% RH |
| Uniformity | ±1.0°C / ±3.0% RH |
| Cooling Water Requirement | 10–28°C, 0.1–0.3 MPa |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, IEC 60068-2-1, IEC 60068-2-2, GJB 1032A–2021, MIL-STD-2164A |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 3,200 (FOB) |
| Load Capacity | Up to 5 kN (configurable options: 1 kN / 2.5 kN / 5 kN) |
| Force Resolution | 1/100,000 of full scale |
| Force Accuracy | ±0.5% of reading (ISO 7500-1 Class 1) |
| Crosshead Speed Range | 0.001–500 mm/min (programmable, ±0.2% speed accuracy) |
| Displacement Resolution | 0.001 mm |
| Data Acquisition Rate | 1 kHz |
| Compliance | ASTM E4, ASTM D638, ASTM D882, ISO 527-1, ISO 1798, GB/T 16491, GB/T 1040.1–1040.5, GB/T 2792, GB/T 3923.1 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,500 (approx.) |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 5170.2–2017, GB/T 11158–2012, GB/T 10592–2023 |
| Control System | 7" or 10" Touchscreen PID Controller with Ethernet/RS-232/RS-485 Interface |
| Refrigeration | Dual-stage cascade refrigeration system with hermetic Tecumseh (France) compressors |
| Interior Material | Electropolished 304 stainless steel, full TIG-welded seams |
| Exterior Material | Powder-coated or polyurethane-coated structural steel |
| Vibration Integration | Standard mounting interface for electrodynamic or servo-hydraulic shakers |
| Data Logging | Onboard SD/USB storage, email/SMS alarm notifications, audit-trail-capable event logging |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,500 (approx.) |
| Table Size | 450 × 450 mm or 500 × 500 mm |
| Amplitude Range | 0–5 mm (adjustable) |
| Frequency Range | 1–400 Hz / 1–2000 Hz / 1–5000 Hz (selectable) |
| Load Capacity | 150 kg |
| Waveform | Sine (half-wave or full-wave, adjustable) |
| Acceleration Range | 0–20 g (adjustable) |
| Sweep Function | 1–5000 Hz (user-defined upper/lower limits and dwell time) |
| Programmable Mode | Up to 15 segments, each with independent frequency and duration settings |
| Octave Sweep | 15-step, bidirectional (low-to-high, high-to-low, low-to-high-to-high), loopable |
| Logarithmic Sweep | Three modes (low-to-high, high-to-low, low-to-high-to-low), loopable |
| Vibration Axis | Vertical (Y), Horizontal (X/Z), or Triaxial (X/Y/Z) |
| Motor Power | 2.2 kW |
| Supply Voltage | 220 V, 50 Hz |
| Max Current | 10 A |
| Timing Control | User-defined duration (in seconds) |
| Control Interface | Full PC-based control with optional analog/digital I/O |
| Measurement Output | Requires external accelerometer and displacement sensor for quantitative amplitude/acceleration validation |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | Ambient +20°C to 500°C |
| Heating Method | PID-controlled SSR-driven Far-Infrared Ni-Cr Alloy Heater (2 kW × 1) |
| Internal Chamber Material | SUS304 Stainless Steel |
| External Cabinet Material | 1.2 mm Cold-Rolled A3 Steel with Powder-Coated Finish |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Door Insulation | Glass Fiber Wool |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Resistant Turbine Fan |
| Over-Temperature Protection | Dual-Stage Thermal Cut-Off System |
| Compliance | Designed per IEC 60068-2-2, ASTM D3418, and ISO 17025-relevant environmental test infrastructure requirements |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,950 (FOB) |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 %RH |
| Ozone Concentration Range | 50–1500 pphm |
| Temp. Uniformity | ±0.5 °C |
| Sample Rack | 360° continuous rotation at 1 rpm |
| Gas Flow Velocity | 8–16 mm/s |
| Control System | Weilun color touchscreen + Siemens PLC |
| Ozone Sensor | Non-dispersive UV absorption type, ≥5 yr service life |
| Compliance Standards | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 11206–2009, ISO 1431-1:2004 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Ozone Concentration Range | 50–1500 ppm (pphm) |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 % RH |
| Temp. Uniformity | ±0.5 °C |
| Sample Rack | 360° Rotational (1 rpm), Static or Dynamic Mode Optional |
| Ozone Generation | Silent Discharge Tube |
| Ozone Detection | Nondispersive UV Absorption Analyzer (≥5 yr lifespan) |
| Control System | Weilun Color Touchscreen + Siemens PLC |
| Output/Interface | 4–20 mA analog output, RS232 communication port |
| Safety Protection | Leakage current, short-circuit, overtemperature, motor overheat, and overcurrent protection |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Ozone Concentration Range | 50–1500 ppm (pphm) |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 % RH |
| Temp. Uniformity | ±0.5 °C |
| Sample Rotation Speed | 1 rpm (360° continuous rotation) |
| Gas Flow Velocity | 8–16 mm/s |
| Control System | Siemens PLC + Weintek Color Touchscreen HMI |
| Ozone Generation | Silent Discharge Tube |
| Ozone Detection | Non-Dispersive UV Absorption Analyzer (≥5 yr service life) |
| Compliance | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 11206–2009, ISO 1431-1:2004 |
| Safety Features | Leakage/short-circuit/overheat/motor-overcurrent protection |
| Interface | 4–20 mA analog output, RS232 communication port |
| Calibration Port | Integrated metrology interface |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 6,300 (approx.) |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 %RH |
| Ozone Concentration Range | 50–1500 pphm |
| Temp. Uniformity | ±0.5 °C |
| Sample Rack | 360° continuous rotation at 1 rpm |
| Gas Flow Velocity | 8–16 mm/s |
| Control System | Weilun color touchscreen + Siemens PLC |
| Ozone Generation | Silent discharge tube |
| Ozone Detection | Nondispersive UV absorption sensor (≥5 yr lifespan) |
| Compliance | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 11206–2009, ISO 1431-1:2004 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 6,300 (FOB) |
| Chamber Volume Options | 80 L / 225 L / 500 L / 1000 L |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 % RH |
| Ozone Concentration Range | 50–1500 pphm |
| Ozone Control Accuracy | ±10 pphm |
| Temperature Uniformity | ±0.5 °C |
| Sample Rotation | 360° continuous, 1 rpm |
| Gas Flow Velocity | 8–16 mm/s |
| Ozone Generation | Silent Discharge Tube |
| Ozone Detection | Non-Dispersive UV Absorption Analyzer (Lifespan ≥5 years) |
| Control System | Weilun Color Touchscreen + Siemens PLC |
| Compliance Standards | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 11206–2009, ISO 1431-1:2004 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 6,300 (approx.) |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 %RH |
| Ozone Concentration | 50–1500 pphm |
| Temp. Uniformity | ±0.5 °C |
| Sample Rack | 360° rotation at 1 rpm |
| Gas Flow Velocity | 8–16 mm/s |
| Control System | Weilun color touchscreen + Siemens PLC |
| Ozone Sensor | Nondispersive UV absorption type, ≥5-year service life |
| Compliance | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 11206–2009, ISO 1431-1:2004 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,950 (FOB) |
| Chamber Volume Options | 80 L / 225 L / 500 L / 1000 L |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 % RH |
| Ozone Concentration Range | 50–1500 pphm |
| Temperature Uniformity | ±0.5 °C |
| Sample Rack | 360° continuous rotation at 1 rpm |
| Gas Flow Velocity | 8–16 mm/s |
| Ozone Generation Method | Silent Discharge Tube |
| Ozone Detection | Nondispersive UV Absorption Analyzer (≥5 yr service life) |
| Control System | Weilun Color Touchscreen + Siemens PLC |
| Safety Protections | Leakage, Short-Circuit, Overtemperature, Motor Overheat, Overcurrent |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 6,300 (approx.) |
| Chamber Volume Options | 80 L / 225 L / 500 L / 1000 L |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 % RH |
| Ozone Concentration Range | 50–1500 pphm |
| Temp. Uniformity | ±0.5 °C |
| Sample Rack | 360° continuous rotation at 1 rpm |
| Gas Flow Velocity | 8–16 mm/s |
| Ozone Generation | Silent Discharge Tube |
| Ozone Detection | Non-Dispersive UV Absorption Analyzer (≥5 yr lifespan) |
| Control System | Weilun Color Touchscreen + Siemens PLC |
| Compliance Standards | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 11206–2009, ISO 1431-1:2004 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 6,200 (approx.) |
| Chamber Volume Options | 80 L / 225 L / 500 L / 1000 L |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 % RH |
| Ozone Concentration Range | 50–1500 pphm |
| Ozone Generation Method | Silent Discharge Tube |
| Ozone Monitoring | Non-Dispersive UV Sensor (≥5 yr lifespan) |
| Control System | Siemens PLC + Weintek Color Touchscreen |
| Temperature Stability | ±0.5 °C |
| Sample Rotation | 360° motorized rack, 1 rpm |
| Gas Flow Velocity | 8–16 mm/s |
| Compliance Standards | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 11206–2009, ISO 1431-1:2004 |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Ozone Concentration Range | 50–1500 ppm (pphm) |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 % RH |
| Temp. Uniformity | ±0.5 °C |
| Sample Mounting | Dynamic (360° rotation at 1 rpm) & Static options |
| Gas Flow Velocity | 8–16 mm/s |
| Control System | Siemens PLC + Weintek Color Touchscreen |
| Ozone Detection | Non-dispersive UV Sensor (≥5 yr lifespan) |
| Compliance | GB/T 7762–2003, GB/T 2951.21–2008, GB/T 11206–2009, ISO 1431-1:2004 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (approx.) |
| Chamber Volume Options | 80 L / 225 L / 500 L / 1000 L |
| Temperature Range | 25–40 °C |
| Humidity Range | 30–65 % RH |
| Ozone Concentration Range | 50–1500 pphm |
| Temperature Uniformity | ±0.5 °C |
| Sample Rack | 360° continuous rotation at 1 rpm |
| Gas Flow Velocity | 8–16 mm/s |
| Ozone Generation | Silent Discharge Tube |
| Detection Method | Non-Dispersive UV Absorption |
| Sensor Lifetime | ≥5 years |
| Control System | Weilun Color Touchscreen + Siemens PLC |
| Output Interface | 4–20 mA analog output, RS232 serial communication |
| Safety Protections | Leakage current, short-circuit, overtemperature, motor overheat, overcurrent |