Other Brands
Filter
Showing 601–630 of 646 results
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range | −40 °C to +100 °C |
| Humidity Range | 30–98 %RH |
| Temp. Uniformity | ±0.5 °C |
| Temp. Deviation | ≤2 °C |
| Humidity Deviation | +2 to −3 %RH |
| Ramp Rate | 0.5–1.2 °C/min |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | -20°C to +150°C / -40°C to +150°C / -60°C to +150°C / -70°C to +150°C |
| Temperature Uniformity | ≤ ±2.0°C (optional down to ±0.5°C) |
| Temperature Stability | ≤ ±0.5°C (optional down to ±0.1°C) |
| Humidity Range | 30–98% RH (customizable) |
| Humidity Accuracy | +2% / –3% RH |
| Heating Rate | 2–3°C/min (up to ≥10°C/min optional) |
| Cooling Rate | 0.7–1.0°C/min (up to ≥10°C/min optional) |
| Noise Level | ≤65 dB(A) |
| Refrigeration System | Single-stage hermetic compressor (Tecumseh/Tecumseh-certified) |
| Control System | PID self-tuning controller with Pt100 RTD sensors |
| Compliance | Designed per IEC 60068-2, ASTM D4332, MIL-STD-810H (environmental test methods), GLP/GMP-ready data logging |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 11,200 (approx. based on ¥80,000 at 1 USD = ¥7.15) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Reference | USD 3,100 (ex-factory, FOB Shanghai |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Chamber Volume Options | 80 L / 150 L / 225 L / 408 L / 800 L / 1000 L |
| Internal Dimensions (W×D×H, mm) | 400×500×400 to 1000×1000×1000 |
| External Dimensions (W×D×H, mm) | 1200×1650×1150 to 1900×2100×1850 |
| Temperature Range | Ambient +10°C to +150°C (standard) |
| Humidity Range | 20–98% RH (with humidification system) |
| Control System | Korean-made 7-inch TFT LCD touchscreen controller with PID algorithm |
| Power Supply | 3-phase 380–400 V AC ±10%, 50 Hz |
| Total Rated Power | 4.5 kW |
| Standard Features | Double-layer electrically heated observation window (220×300 mm), stainless steel sample racks (2 pcs), desiccant-based anti-condensation duct, dry/wet bulb humidity sensing, RS232-C interface, solid-state relay heating, hermetic refrigeration circuit, left-side 50 mm diameter cable port with thermal isolation and silicone rubber gasket, safety interlock door latch mechanism |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,500 (FOB) |
| Compliance Standards | MIL-STD-810G Method 506.6 (replaces GJB150.8), IEC 60529 IPX1–IPX6, ISO 20653:2013, GB/T 4208–2017, GB/T 2423.38–2008, IEC 60068-2-68, GB/T 4942.1–2006, IEC 60034-5 |
| (在此处输出精准翻译� | �纯英文产品名称。极其重要：仅输出一行名称，严禁输出备选名、严禁换行重复、严禁包含任何中文字符) |
|---|---|
| [Brand | Other Brands |
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -60°C to +80°C (selectable low-temp options: 0°C, -20°C, -40°C, -60°C) |
| Humidity Range | 20–98% RH (optional extended ranges: 5–98%, 10–98%, 20–98% RH) |
| Control System | Microprocessor-based PID + SSR + Timer |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.5, GJB 360.7-87, GJB 367.2-87, IEC 60068-2-14, QC/T 17-92, EIA-364-32 |
| Construction | Inner chamber – SUS304B stainless steel |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,500 (FOB) |
| Compliance Standards | MIL-STD-810G Method 512.5, IEC 60529 IPX1–IPX6, ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8, IEC 60068-2-68, GB/T 4942.1, IEC 60034-5 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | Low Temp Options: +25°C / 0°C / −20°C / −40°C / −60°C / −70°C |
| High Temp Options | 100°C / 150°C |
| Humidity Range | 5–98% RH (optional) |
| Temperature Resolution & Uniformity | 0.1°C / ±2.0°C |
| Humidity Resolution & Uniformity | 0.1% RH / ±3.0% RH |
| Temperature Control Accuracy | ±0.5°C / ±2.5% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Interior/Exterior Material | SUS304 Stainless Steel |
| Refrigeration System | French Tecumseh Compressor with R404A Eco-Friendly Refrigerant |
| Viewing Window | Double-layered, anti-fog heated tempered glass with LED lighting |
| Controller | Imported LCD touchscreen interface supporting multi-segment programmable ramp/slope and step profiles |
| Structural Features | Rounded ergonomic housing, flat non-reactive door handle, double-gasketed airtight door seal, adjustable stainless steel shelves, external test port for signal/power feedthrough, integrated casters with locking mechanism |
| Optional Functions | External water supply system with automatic condensate recovery, humidity control capability |
| Brand | Other brands |
|---|---|
| Origin | South Korea |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | NFAD Series |
| Pricing | Upon Request |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Pressure Control Accuracy | ±0.15 kg/cm² |
| Temperature Uniformity | ±2.0 % at 100 °C |
| Heating Time | RT to 121 °C in ≤35 min |
| Pressurization Time | 0.0 to 1.00 kg/cm² in ≤35 min |
| Test Duration Range | 0–1000 h |
| Vacuum Pre-treatment | Yes, with HEPA-filtered air intake (<1 µm particle retention) |
| Water Supply Mode | Manual + Automatic (up to 999 h continuous operation) |
| Safety Features | Dual-pressure interlocked door, patented self-sealing gasket, overpressure protection, LIMIT-based fault detection, auto-depressurization at test end, timed drying function |
| Compliance Standards | CNS, ISO 9001/17025 (applicable test methods), JIS C 0045, ASTM D3418, DIN EN 60068-2-66, IEC 60068-2-66, MIL-STD-810H, NACE TM0177, UL 746C, BS EN 60068-2-66 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (approx.) |
| Internal Dimensions (mm) | 500×500×400 to 1000×1000×1000 |
| Temperature Range | 0–100°C (optional up to 150°C) |
| Black Panel Temperature | 40–85°C |
| Humidity Range (Light Cycle) | 20–75% RH |
| (Dark Cycle) | 20–98% RH |
| Temperature Uniformity | ±2.0°C |
| Temperature Stability | ±0.5°C |
| Humidity Uniformity | ±3.0% RH |
| Humidity Stability | ±2.0% RH |
| Irradiance | 550 W/m² ±10% (300–800 nm), 1120 W/m² ±10% (300–1200 nm or 300–3000 nm) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ~1500 h |
| Spray Duration | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500 mm diameter rotating turntable (0–3 rpm) |
| Construction | Interior – 1.2 mm SUS304 stainless steel |
| Safety Protections | Over-temperature, compressor high/low pressure, short-circuit, overload, oil-pressure, travel limit, and leakage current protection |
| Optional Accessories | Ø50 mm cable port, SUS316 sample trays, liquid nitrogen inlet |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,800 (Reference Only) |
| Internal Volume | 80–1000 L |
| Temperature Range | RT+10°C to 70°C |
| Humidity Range | 65–98% RH |
| Rainfall Duration | 1–9999 min 59 sec (adjustable) |
| Rainfall Cycle | 1–240 min (interval programmable) |
| Irradiance Control | ≤300 W/m² (at 340 nm) |
| Xenon Lamp Power | 12.0 kW (rated life: ~1600 h) |
| Temperature Control Accuracy | ±0.1°C |
| Humidity Control Accuracy | ±1% RH |
| Black Panel Temperature Sensor | Bimetallic |
| Controller | Color Touchscreen + Siemens PLC |
| Heating System | Independent Ni-Cr Alloy Heaters |
| Humidification | External Stainless Steel Surface-Evaporation Type |
| Construction | Cold-Rolled Carbon Steel (Phosphated & Powder-Coated) / SUS304 Stainless Steel Interior |
| Safety Protections | Overtemperature, Dry-Out, Leakage, Short-Circuit, Motor Overload, Current Overload |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 5,300 (Reference Only) |
| Power Supply | AC 220 V, 50 Hz, Single-Phase |
| Ground Resistance | ≤4 Ω |
| Lamp Type | Q-Panel OEM Xenon Arc Lamp Tube (UVA-340 or UVB-313) |
| Ballast | Electronic Ignition & Constant-Power Regulated Ballast |
| Protection Systems | Leakage Current Protection, Over-Temperature Alarm, Short-Circuit Protection, Power Failure Safeguard |
| Test Cycle Modes | Light–Heat–Dark–Moisture (Condensation/Spray) |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (Reference Only) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (Reference Only) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 5,200 (Reference Only) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 5,300 (FOB) |
| Chamber Volume Options | 100 L / 225 L / 500 L / 1000 L |
| Light Source | Long-Arc Air-Cooled Xenon Lamp |
| Spectral Range | 300–1200 nm |
| Irradiance Control | 300–800 nm @ 550 W/m² ±10% |
| Black Panel Temperature Range | 40–85 °C |
| Chamber Temperature Range | 0–150 °C |
| Humidity Range (Light Cycle) | 20–75 %RH |
| Humidity Range (Dark Cycle) | 20–98 %RH |
| Temp. Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0 %RH |
| Temp. Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.0 %RH |
| Water Spray Duration | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer mesh tray or 500 mm rotary turntable (0–3 rpm) |
| Internal Construction | SUS304 stainless steel |
| External Construction | SUS304 stainless steel or powder-coated steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Lamp Life | ~1,500 hours (at standard irradiance setpoint) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 5,300 (FOB, ex-works reference only |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Range | USD 5,300–15,800 (FOB) |
| Chamber Models | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Internal Dimensions (W×D×H, cm) | 50×50×40 |
| Temperature Range | 0–150°C (chamber), 40–85°C (black panel) |
| Humidity Range | 20–75% RH (light cycle), 20–98% RH (dark cycle) |
| Control Accuracy | ±0.5°C (temp), ±2.0% RH (humidity) |
| Uniformity | ±2.0°C (temp), ±3.0% RH (humidity) |
| Spectral Irradiance | 300–800 nm @ 550 W/m² ±10% |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ≥1500 h |
| Spray Cycle | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500-mm-diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 5,200 (Reference Only) |
| Light Source | Air-Cooled Long-Arc Xenon Lamp |
| Spectral Range | 290–800 nm (Full Solar Spectrum) |
| Irradiance Control | 0.35–0.65 W/m² @ 340 nm |
| Temperature Range | RT +10°C to 80°C |
| Humidity Range | 10–95% RH |
| Water Spray Cycle | Programmable On/Off |
| Sample Rotation | Dual-axis (Orbital + Self-rotation) |
| Filter Options | Daylight-Q, Window-Glass, Extended UV |
| Lamp Life | ~1600 h at 0.55 W/m² @ 340 nm |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, AATCC TM16, GB/T 16422.2 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Rainfall Intensity | 600–3600 mm/h |
| Spray Arm Radius | 375 mm |
| Spray Arm Diameter | φ15 mm |
| Spray Arm Oscillation Angle | ±45° to ±90° |
| Nozzle Diameter | φ0.4 mm or φ0.8 mm |
| Nozzle Spacing | 50 mm |
| Turntable Speed | 1–10 rpm |
| Timer Range | 1 s – 99 h 99 min 99 s |
| Rain Cycle Setting | 1 s – 99 h |
| Internal Chamber Dimensions | 800 × 800 × 800 mm |
| Construction | ST12 Cold-Rolled Steel Outer Shell + Phosphated & Powder-Coated Finish |
| Interior | Seamless Welded SUS304 Stainless Steel |
| Spray Pipes | SUS304 Stainless Steel |
| Turntable Material | Stainless Steel Plate |
| Water Filtration | Ultra-Fine Stainless Steel Mesh Filter |
| Water Lift System | Pump-Based |
| Water Level Control | Float Switch |
| Radiation Measurement | Fiber-Optic Coupled Radiometer |
| Lamp Cooling | Closed-Loop Chilled Water Circulation System |
| Temperature Monitoring | Wireless Black Panel Thermometer (BPT) / Black Standard Thermometer (BST) |
| Safety Interlock | Coolant Flow–Dependent Xenon Lamp Ignition & Auto-Shutdown on Failure |
| Compliance | GB/T 2423.23–1990, GB/T 2423.38–1990, GB/T 4208–1993, GB/T 10485–1993, GB/T 4857.9–1992, GB/T 2014.9 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (approx. based on ¥38,000) |
| Chamber Models | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Internal Dimensions (W×D×H, cm) | 50×50×40 / 50×75×60 / 80×80×80 / 100×100×100 |
| Temperature Range | 0–150°C (chamber), 40–85°C (black panel) |
| Humidity Range | 20–75% RH (light cycle), 20–98% RH (dark cycle) |
| Control Accuracy | ±0.5°C / ±2.0% RH |
| Uniformity | ±2.0°C / ±3.0% RH |
| Irradiance | 550 W/m² ±10% (300–800 nm) or 1000 W/m² ±10% (300–1200 nm) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ~1500 h |
| Spray Cycle | 1–999 min (intermittent/continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500 mm diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (Reference Only) |
| Chamber Models | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Internal Dimensions (W×D×H, cm) | 50×50×40 / 50×75×60 / 80×80×80 / 100×100×100 |
| Overall Dimensions (W×D×H, cm) | 100×170×90 / 110×190×100 / 140×190×130 / 165×210×150 |
| Temperature Range | 0–150 °C (Chamber), 40–85 °C (Black Panel) |
| Humidity Range | 20–75% RH (Light Cycle), 20–98% RH (Dark Cycle) |
| Control Accuracy | ±0.5 °C (Temp), ±2.0% RH (Humidity) |
| Uniformity | ±2.0 °C (Temp), ±3.0% RH (Humidity) |
| Irradiance | 550 W/m² ±10% (300–800 nm), 1000 W/m² ±10% (300–1200 nm) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ≈1500 h |
| Spray Duration | 1–999 min (Intermittent or Continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Holder | Dual-layer flat mesh rack or 500 mm diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (Reference Only) |
| Chamber Models | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Internal Dimensions (W×D×H, cm) | 50×50×40 / 50×75×60 / 80×80×80 / 100×100×100 |
| Temperature Range | 0–150°C (Chamber), 40–85°C (Black Panel) |
| Humidity Range | 20–75% RH (Light Cycle), 20–98% RH (Dark Cycle) |
| Temp. Control Accuracy | ±0.5°C |
| Humidity Control Accuracy | ±2.0% RH |
| Temp./RH Uniformity | ±2.0°C / ±3.0% RH |
| Spectral Range | 300–800 nm (550 W/m² ±10%) and 300–1200 nm (1000 W/m² ±10%) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ≈1,500 h |
| Spray Duration | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500 mm diameter rotating turntable (0–3 rpm) |
| Interior Material | SUS304 stainless steel |
| Exterior Material | SUS304 stainless steel or powder-coated steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (Reference Only) |
| Chamber Models | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Internal Dimensions (W×D×H, cm) | 50×50×40 / 50×75×60 / 80×80×80 / 100×100×100 |
| External Dimensions (W×D×H, cm) | 100×170×90 / 110×190×100 / 140×190×130 / 165×210×150 |
| Temperature Range | 0–150°C (Chamber), 40–85°C (Black Panel) |
| Humidity Range | 20–75% RH (Light Cycle), 20–98% RH (Dark Cycle) |
| Temp. Control Accuracy | ±0.5°C |
| Humidity Control Accuracy | ±2.0% RH |
| Temp. Uniformity | ±2.0°C |
| Humidity Uniformity | ±3.0% RH |
| Irradiance | 550 W/m² ±10% (300–800 nm) or 1000 W/m² ±10% (300–1200 nm) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ~1,500 h |
| Spray Duration | 1–999 min (Intermittent or Continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer mesh tray or 500-mm-diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (approx.) |
| Chamber Models | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Internal Dimensions (cm) | 50×50×40 / 50×75×60 / 80×80×80 / 100×100×100 |
| Temperature Range | 0–150°C (chamber), 40–85°C (black panel) |
| Humidity Range | 20–75% RH (light cycle), 20–98% RH (dark cycle) |
| Control Accuracy | ±0.5°C / ±2.0% RH |
| Uniformity | ±2.0°C / ±3.0% RH |
| Spectral Range | 300–800 nm (550 W/m² ±10%) and 300–1200 nm (1000 W/m² ±10%) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ~1,500 h |
| Spray Duration | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500-mm-diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (approx.) |
| Temperature Range | 0–150°C (chamber), 40–85°C (black panel) |
| Humidity Range | 20–75% RH (light cycle), 20–98% RH (dark cycle) |
| Irradiance | 550 W/m² ±10% (300–800 nm), 1000 W/m² ±10% (300–1200 nm) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ≈1500 h |
| Spray Duration | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500 mm diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Compliance | GB/T 8427, GB/T 16422-2, GB/T 8430, ISO 4892-2, ASTM D529, GB/T 14576, GB/T 15102-2006, GB/T 15104-2006 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (approx.) |
| Temperature Range | 0–150°C (chamber), 40–85°C (black panel) |
| Humidity Range | 20–75% RH (light cycle), 20–98% RH (dark cycle) |
| Irradiance | 550 W/m² ±10% (300–800 nm), 1000 W/m² ±10% (300–1200 nm) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ~1,500 hours |
| Spray Duration | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500 mm diameter rotating turntable (0–3 rpm) |
| Internal Dimensions (cm) | 50×50×40 (OK-XD-100) to 100×100×100 (OK-XD-1000) |
| Construction | Interior — SUS304 stainless steel |
| Control Accuracy | ±0.5°C (temperature), ±2.0% RH (humidity) |
| Uniformity | ±2.0°C (temperature), ±3.0% RH (humidity) |
| Compliance Standards | GB/T 8427, GB/T 16422-2, ISO 4892-2, ASTM D529, GB/T 14576, GB/T 15102-2006, GB/T 15104-2006 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (approx.) |
| Internal Dimensions (cm) | 50×50×40 / 50×75×60 / 80×80×80 / 100×100×100 |
| Temperature Range | 0–150°C (chamber), 40–85°C (black panel) |
| Humidity Range | 20–75% RH (light cycle), 20–98% RH (dark cycle) |
| Control Accuracy | ±0.5°C / ±2.0% RH |
| Uniformity | ±2.0°C / ±3.0% RH |
| Irradiance | 550 W/m² ±10% (300–800 nm) or 1000 W/m² ±10% (300–1200 nm) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ~1500 h |
| Spray Duration | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500-mm-diameter rotating drum (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |