Other Brands
Filter
Showing 181–210 of 646 results
| [Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,500 (approx.) |
| Internal Chamber | Ø300 × 450 mm (cylindrical) |
| External Dimensions | 660 × 950 × 600 mm (W×H×D) |
| Interior Material | SUS304 Stainless Steel |
| Exterior Finish | Powder-Coated Steel |
| Temperature Range | 100–132°C |
| Humidity | 100% RH (saturated steam) |
| Pressure Range | 0.0–3.0 kg/cm² absolute (max. safety rating: 3.0 kg/cm² gauge = 1 atm + 2.0 kg/cm²) |
| Time Range | 0–1000 h |
| Temp. Uniformity | ±2.0°C at 100°C |
| Temp. Accuracy | ±0.5°C |
| Temp. Resolution | 0.1°C |
| Pressure Accuracy | ±0.15 kg/cm² |
| Heating Rate | RT to 121°C in ≤35 min |
| Pressurization Rate | 0.0 to 1.0 kg/cm² in ≤35 min |
| Control System | Microprocessor-based PID + SSR with LED display for temperature/time |
| Sensor | PT-100 RTD (Class A) |
| Heating Element | Insulated high-voltage resistant sheathed heater |
| Air Circulation | Natural convection of saturated steam] |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions | Ø250 × 400 mm |
| External Dimensions | W560 × H1000 × D650 mm |
| Temperature Range | +100°C to +132°C |
| Relative Humidity | 100% RH (saturated steam) |
| Control System | Microprocessor-based PID controller with LED display, SSR output |
| Temperature Sensor | Pt100 platinum resistance thermometer |
| Heating | Stainless steel finned heater |
| Humidification | Electric surface-evaporation type with drain port |
| Inner Chamber Material | SUS#304 mirror-finish stainless steel |
| Outer Cabinet | SUS#304 stainless steel with electrostatic powder coating |
| Safety Protections | Fuseless overcurrent protection, compressor overload protection, overtemperature cut-off, low-water level alarm, dry-heater burnout prevention, fast-acting thermal fuse |
| Power Supply | 1Φ 220 V, 8 A, 50 Hz ±10% |
| Water Requirement | RO-purified or distilled water |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions | Ø250 × 400 mm |
| External Dimensions | W560 × H1000 × D650 mm |
| Temperature Range | +100°C to +132°C |
| Humidity Range | 75–100% RH |
| Control System | Microprocessor-based PID controller with LED display |
| Temperature Sensor | Pt100 Platinum Resistance Thermometer |
| Heating | Stainless Steel Finned Heater |
| Humidification | Electric Surface Evaporation System |
| Chamber Material | Interior – Mirror-Finish SUS#304 Stainless Steel |
| Safety Protections | Fuseless Overload Protector, Compressor Overcurrent Protector, Overtemperature Cut-off, Low-Water Level Detection, Dry-Run Protection for Heater/Humidifier, Fast-Acting Thermal Fuse |
| Power Supply | 1φ 220 V, 8 A, 50 Hz ±10% |
| Water Requirement | RO Purified or Distilled Water |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Pressure Range | 0–6 kg/cm² (0–0.6 MPa) |
| Operating Pressure | 2.0 kg/cm² (≈200 kPa gauge) |
| Temperature Range | +100°C to +132°C (saturated steam) |
| Humidity Range | 75–100% RH (saturated vapor) |
| Temperature Control Accuracy | ±0.5°C |
| Time Setting Range | 0.00–999.99 hours |
| Chamber Structure | Horizontal cylindrical test chamber with vacuum-assisted air purge |
| Compliance | ASTM D2244, IEC 60068-2-66, JIS C 60068-2-66, MIL-STD-202, ISO 16750-4, UL 746, NACE TM0177, CNS 12527, BS EN 60068-2-66 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +105.0°C to +142.9°C |
| Humidity Range | 75–100% RH |
| Temperature Stability | ±0.5°C |
| Humidity Stability | ±3% RH |
| Temperature Uniformity | ±1.0°C |
| Pressure Range | 0.2–2.0 kg/cm²G (Optional: 0.2–4.0 kg/cm²G) |
| Ramp Time | ~120 min (from ambient to 140°C) |
| Internal Chamber Dimensions | Ø45×45 cm or Ø65×60 cm |
| Construction Material | Inner & Outer Chamber – SUS316 Stainless Steel (Body), SUS304 Stainless Steel (Exterior Casing) |
| Power Supply | 1φ 220V 60Hz / 3φ 380V 50Hz, 20A |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 13,500 (FOB) |
| Internal Dimensions (Ø × H) | Φ250×300 mm to Φ650×600 mm |
| External Dimensions (W×H×D) | 500×500×700 mm to 950×900×1100 mm |
| Operating Temperature Range | 105–135 °C (143 °C optional) |
| Relative Humidity Range | 70–100 % RH |
| Steam Pressure Range | 0–2.0 kg/cm² (gauge), up to 3.0 kg/cm² on special order |
| Power Supply | AC 220 V / 380 V, 50/60 Hz |
| Safety Features | Dual overheat protection, door interlock, pressure relief valve, low-water cutoff, automatic steam purge, auto-fill and manual drain functions |
| Compliance | Designed per JESD22-A110, JEDEC Standard for HAST |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +100°C to +132°C |
| Temp. Uniformity | ±1.5°C |
| Temp. Stability | ±0.5°C |
| Humidity Range | 75–100% RH (Saturated Steam) |
| Humidity Uniformity | ±3.0% RH |
| Humidity Stability | ±1.5% RH |
| Pressure Range | 0–4 kg/cm² (gauge), with operating range 1.0–3.0 kg/cm² |
| Max. Safety Pressure Capacity | 4 kg/cm² (≈490 kPa gauge, equivalent to ~5 atm absolute) |
| Test Duration | 0–999 hours |
| Pressurization Time | ~45 min (0 → 2.00 kg/cm²) |
| Heating Time | ~10 min (+100°C → +132°C, no-load, air temperature average) |
| Circulation Method | Natural convection of saturated steam |
| Control System | Microprocessor-based PID controller with PT-100 RTD sensing, LED time display, analog pressure gauge, and manual water inlet valve with auto-refill capability |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Internal Chamber Dimensions | Φ25×35 cm, Φ30×45 cm, Φ40×55 cm, Φ50×60 cm |
| Temperature Range | 105–132°C, 105–142.9°C, 105–155°C |
| Pressure Range | 0.2–2.0 kg/cm² (gauge), 0.2–3.0 kg/cm² (gauge), 0.2–3.5 kg/cm² (gauge) |
| Humidity Range | 65–100% RH (adjustable) |
| Controller | Dual-language (English/Chinese), USB & RS-232C interfaces, real-time data logging and curve export |
| Resolution | Temperature: 0.1°C, Humidity: 0.1% RH, Pressure: 0.1 kg/cm² |
| Temperature/Humidity Stability (Unsaturated Mode) | ±0.5°C / ±2.5% RH |
| Temperature/Humidity Stability (Saturated Mode) | ±0.5°C / 100% RH |
| Uniformity | ±0.5°C / ±5% RH |
| Bias Terminals | Standard: 8 channels (optional: 8–55 channels), AC/DC 125 V / 1 A |
| Pressurization Time | ~45–55 min depending on configuration |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Internal Dimensions (Ø × L) | 30 cm × 50 cm |
| External Dimensions (W × H × D) | 56 cm × 45 cm × 82 cm |
| Operating Pressure Range | Up to 3 atm (gauge) |
| Temperature Range | 100 °C to 130 °C |
| Humidity Range | 85–100% RH (saturated steam environment) |
| Water Supply | Automatic float-controlled stainless steel reservoir |
| Safety Compliance | Meets IEC 60068-2-66, JESD22-A102D, MIL-STD-202 Method 108, and JEDEC JESD22-A110 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Internal Chamber Dimensions | Φ250×450 mm / Φ300×450 mm / Φ400×450 mm |
| Temperature Range | 100–132 °C |
| Humidity Range | 75–100 % RH (saturated steam) |
| Pressure Range | 0–2.5 kg/cm² above ambient atmospheric pressure |
| Circulation Method | Natural convection of saturated steam |
| Temperature Sensor | PT-100 Ω RTD (platinum resistance thermometer) |
| Heating Element | Insulated, high-voltage-rated resistive heater |
| Chamber Material | Stainless steel cylindrical inner chamber with arc-shaped interior walls |
| Sealing Mechanism | Self-tightening elastomeric packing under internal pressure |
| Pre-test Vacuum Function | Integrated vacuum pump with ≤1 µm particulate filtration |
| Safety Protection | Critical-point limit monitoring with fault indication and automatic shutdown |
| Auxiliary Functions | Timed post-test drying cycle |
| Water Management | Automatic water replenishment and controlled pressure release at test completion |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Temperature Range | 105–132 °C |
| Temperature Uniformity | ±2.0 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Range | 75–100 % RH |
| Humidity Stability | ±2.5 % RH |
| Humidity Uniformity | ±5.0 % RH |
| Pressure Range | 0.05–0.196 MPa (0.5–2.0 kgf/cm²) |
| Ramp Time (Temp) | ≤35 min (25→132 °C) |
| Ramp Time (Pressure) | ≤40 min (0→0.196 MPa) |
| Safety | Overpressure, overtemperature, and vacuum-failure interlocks |
| Compliance | Designed per JESD22-A110, JEDEC Standard, MIL-STD-883 Method 1030, and IEC 60068-2-66 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Temperature Range | 105–132 °C (control point) |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Range | 75–100 % RH (control point) |
| Humidity Fluctuation | ±2.5 % RH |
| Humidity Uniformity | ±5.0 % RH |
| Pressure Range | 0.05–0.196 MPa (0.5–2 kgf/cm²) |
| Ramp Time (Ambient to 132 °C) | ≤35 min |
| Pressure Ramp Time (Ambient to 2 kgf/cm²) | ≤40 min |
| Water Level Auto-Replenishment | Yes |
| Post-Test Drying Function | Electric Heating Dry Mode |
| Compliance | ASTM B809, JESD22-A102, JEDEC JESD22-A110, IEC 60068-2-66 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price Reference | USD 3,100 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Reference | USD 3,100 (ex-works, subject to configuration and certification requirements) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Reference | USD 3,100 (FOB) |
| Compliance Standards | GB/T 5170.2–1996, GB/T 10592–1993, GB/T 2423.2–2008 (IEC 60068-2-2), GJB 150.3A–2009, GJB 150.4A–2009, MIL-STD-810G |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Reference | USD 3,100 (excl. tax & freight) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 920 (approx. based on ¥6500 at 1:7.07 exchange rate) |
| Temperature Range | Ambient +20°C to 500°C |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | 1.2 mm A3 Cold-Rolled Steel with Powder Coating |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Heating System | PID + Solid-State Relay (SSR) Controlled Resistive Heating |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Turbine Fan |
| Temperature Sensor | Pt100 Platinum Resistance Thermometer |
| Compliance | GB/T 2423.2-2008 (Equivalent to IEC 60068-2-2) |
| Safety Features | Overtemperature Cut-off, Leakage Current Protection, Audible/Visual Alarm |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 920 (FOB) |
| Temperature Range | Ambient +20°C to 500°C |
| Chamber Construction | External SECC steel with powder-coated finish |
| Insulation | Rigid polyurethane foam + glass fiber (walls & door) |
| Air Circulation | Forced horizontal airflow via high-temp resistant centrifugal fan |
| Heating System | PID + SSR controlled far-infrared Ni-Cr alloy heaters (2 kW × 1) |
| Safety | Dual-stage overtemperature protection, automatic load cutoff, thermal fuse |
| Compliance | Designed per GB/T 2423.2-2008 (IEC 60068-2-2:2007 equivalent) |
| Control Interface | Digital PID controller with auto-tuning, real-time temperature display, and deviation alarm |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+20°C to 500°C (customizable) |
| Control Accuracy | ±0.5°C |
| Uniformity | ±1.5°C |
| Internal Construction | SUS304 Stainless Steel |
| External Construction | 1.2 mm A3 Steel with Powder-Coated Finish |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Air Circulation | Forced Horizontal Airflow via High-Temperature Turbine Fan |
| Heating System | PID + Solid-State Relay (SSR) Control |
| Safety Protections | Over-Temperature Cut-Off, Leakage Current Protection, Audible/Visual Alarm |
| Compliance | GB/T 2423.2 (Equivalent to IEC 60068-2-2), GLP-Compatible Operation |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT to 200 °C (standard), up to 300 °C or 500 °C (custom) |
| Control Accuracy | ±0.5 °C |
| Temperature Uniformity | ±1.5 °C |
| Interior Material | SUS304 Stainless Steel |
| Exterior Material | 1.2 mm A3 Cold-Rolled Steel with Powder Coating |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Heating System | 2 kW Far-Infrared Ni-Cr Alloy Heater |
| Controller | Fuji PID Digital Microprocessor Controller with Auto-Tuning |
| Sensor | Pt100 Platinum Resistance Thermometer |
| Safety Features | Over-Temperature Alarm, Over-Temperature Cut-Off, Earth Leakage Protection |
| Compliance | GB/T 2423.2 (High-Temperature Environmental Testing for Electrical and Electronic Products) |
| Power Supply | AC 220 V ±5% / 50 Hz or AC 380 V ±5% / 50 Hz |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | RT+10°C to 200°C / 300°C |
| Uniformity | ±2°C |
| Temperature Fluctuation | ±0.5°C |
| Air Exchange Rate | 2–100 cycles/h |
| Adjustable Exchange Time | 1 min – 99 h |
| Chamber Volume Options | 100 L to 800 L |
| Power Consumption | 4.0–9.0 kW |
| Compliance | ASTM D5423-09 (Type II), ASTM D5374-93 (2005), UL 1581, GB/T 2423.2, IEC 60068-2-2, JIS C 0068, VDE 0470-1 |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Internal Dimensions | Ø30 × L50 cm |
| External Dimensions | W56 × H45 × D82 cm |
| Chamber Material | SUS#304 Stainless Steel (Exterior), SECC + Powder-Coated (Interior) |
| Water Capacity | Manual Refill → 1 h Continuous Operation |
| Safety Features | Vacuum Preconditioning, Dual-Stage Pressure Relief, Over-Pressure Interlock, Filtered Air Inlet (Particle <1 µm) |
| Compliance | Designed per JESD22-A110, JESD22-A118, and IEC 60068-2-66 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Frequency Range | 1–5000 Hz (±0.1%) |
| Max. Load Capacity | 100 kg |
| Peak Force Output | 2000 kgf |
| Table Surface Dimensions | 500 × 500 × 6 mm (L × W × H) |
| Table Mounting | 25 × M10 threaded holes + 16 × hook slots (70 mm length) |
| Motion Axes | 6-DOF simultaneous vibration |
| Control Modes | Sine, Random (multi-stage), Road Profile Simulation, Swept Sine, Programmable (15-segment), Octave, Logarithmic, Constant Acceleration, Constant Displacement |
| Display Resolution | 0.01 Hz frequency resolution |
| Communication Interface | RS-485 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,000 (approx.) |
| Temperature Range | –70°C to +180°C |
| Humidity Range | 10–98% RH |
| Vibration System | Electromagnetic Shaker (Optional: 3-axis or 6-DOF) |
| Control Interface | RS232 & USB Data Export |
| Cooling Technology | PWM-Controlled Refrigerant Flow Regulation |
| Compliance | IEC 60068-2, MIL-STD-810H, GB/T 2423 (equivalent to ISO 16750-4), GLP/GMP-ready data logging |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 7,000 (approx.) |
| Construction | External Pressure-Bearing Cabinet with Stainless Steel Interior |
| Insulation | Ultra-Fine Glass Wool + Rigid Polyurethane Foam |
| Refrigeration System | Air-Cooled Hermetic Compressor (Tecumseh/France) |
| Heating System | Stainless Steel Finned Heater |
| Air Circulation | Multi-Blade Fan with HVAC-Grade Motor |
| Temperature Sensor | PT100 Platinum Resistance Thermometer |
| Controller | 7-Inch Touchscreen HMI with PID Algorithm |
| Safety Protections | Over-Temperature (Chamber), Compressor Overload/High-Pressure/Oil-Pressure Fault, Fan Overload, Phase Loss, Compressor Delay Start |
| Optional | PC-Based Remote Monitoring Software & Ethernet Interface |
| Compliance | Designed per IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-78 (Damp Heat), MIL-STD-810H Method 502.6/503.5 |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | -70°C to +150°C (configurable variants: -20/-40/-60°C to +150°C) |
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ±2.0°C (ambient, unloaded) |
| Temperature Stability | ±0.5°C (ambient, unloaded) |
| Temperature Deviation | ±3.0°C (ambient, unloaded) |
| Heating Rate | 1.0–3.0°C/min (unloaded) |
| Cooling Rate | 0.7–1.0°C/min (unloaded) |
| Pressure Range | Ambient to 0.5 kPa |
| Pressure Accuracy | ±1.8 kPa (ambient–40 kPa), ±4.5% (40–4 kPa), ±0.1 kPa (4–0.5 kPa) |
| Depressurization Time | ≤45 min (ambient → 0.5 kPa) |
| Compliance Standards | GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.3–1993, GB 10586–2006, GB 10589–2006, GB 10592–2006, GB 11158–2006, GB/T 5170.2–1996, GB/T 5170.5–1996 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 500×600×500 mm to 1000×1000×1000 mm |
| External Dimensions (W×H×D) | 1750×2250×2350 mm to 2350×2800×3000 mm |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range (optional) | 20–98% RH |
| Rapid Thermal Cycling Range | −45 °C to +85 °C |
| Rapid Thermal Cycling Accuracy | ±3.0 °C |
| Ramp Rates | 5–30 °C/min (linear or non-linear, selectable) |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Temperature Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.5% RH |
| Construction | Interior – SUS304 stainless steel |
| Insulation | High-density polyurethane foam (CFC-free, high-temperature resistant) |
| Cooling System | Water-cooled |
| Compressor | Tecumseh (France) or Bitzer (Germany) |
| Power Supply | AC 380 V, 3-phase 5-wire, 50/60 Hz |
| Weight | 950–2300 kg |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| High-Temp Zone Range | RT to +150 °C |
| Low-Temp Zone Range | RT to −40 °C |
| Transfer Time Between Zones | ≤15 s |
| Temperature Recovery Time | ≤5 min |
| Dwell Time per Zone | ≥1 h or until specimen thermal stabilization |
| Compliance Standards | MIL-STD-810H (Method 503.5), GJB 150.3A–2009, GJB 150.4A–2009, GB/T 2423.1–2023, GB/T 2423.2–2023, GB 10592–2023 |