Parker
Filter
Showing all 8 results
| Brand | Parker |
|---|---|
| Origin | USA |
| Model | CDAS HL 65 |
| Flow Rate | 55–300 m³/h |
| Operating Pressure | 4–16 bar |
| Pressure Dew Point | –20 °C to –70 °C |
| Filter Certification | ISO 8573-1 compliant (OIL-X series) |
| Desiccant Cartridge Lifetime | 5 years |
| Warranty | 10 years |
| Installation | Pallet-truck compatible |
| End Cap Type | Threaded |
| Purge Control | Tool-free adjustable minimum operating pressure setting |
| Flow Optimization | Low-pressure-drop valve architecture with robust cylinder design |
| Brand | Parker |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Import Status | Imported |
| Model | 20H / 40H / 60H |
| Hydrogen Generation Principle | Pure Water Electrolysis |
| Output Flow Rate | 160–500 mL/min (model-dependent) |
| Output Pressure | 5–100 psi (adjustable) |
| Hydrogen Purity | ≥99.9999% |
| Power Consumption | 50 W (at nominal load) |
| Gas Outlet | 1/8″ Swagelok® compression fitting |
| Dimensions (W×H×D) | 245 × 643 × 724 mm |
| Weight | 34 kg |
| Dryer Type | Integrated desiccant-based purification module |
| Safety Certifications | CE, UKCA, UL-compliant design architecture |
| Compliance | Designed to meet ISO 8573-1:2010 Class 1 for gaseous impurities (H₂O, O₂, total hydrocarbons), compatible with GLP/GMP laboratory environments and FDA 21 CFR Part 11 data integrity requirements when integrated with validated software |
| Brand | Parker |
|---|---|
| Origin | United Kingdom |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | UHPZN2-1000C-E |
| Nitrogen Generation Principle | Pressure Swing Adsorption (PSA) |
| Output Flow Rate | 1.0 L/min |
| Output Pressure | 5–7 bar (adjustable) |
| Nitrogen Purity | ≥99.9995% (v/v) |
| Hydrocarbon Content | <0.1 ppm (as CH₄ equivalent) |
| Dew Point | ≤–70 °C (at 5 bar) |
| Integrated Oil-Free Compressor | Yes |
| Dimensions (W×H×D) | 534 × 586 × 966 mm |
| Weight | 79.6 kg |
| Brand | Parker |
|---|---|
| Origin | USA |
| Model | FID-2500 |
| Output Purity | 99.9995% H₂ |
| Zero Air THC | <0.1 ppm |
| Capacity | Supports up to 11 FID detectors |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Dimensions | 483 × 584 × 356 mm (W × D × H) |
| Weight | 42 kg |
| Compliance | CE, UL 61010-1, ISO 8573-1 Class 1 for compressed air feed |
| Brand | Parker |
|---|---|
| Origin | USA |
| Model | MGG-400 |
| Gas Purity | <0.05 ppm THC (as methane) |
| Output Capacity | Sufficient for 5–6 FID detectors |
| Regulatory Compliance | Designed for GLP/GMP-aligned laboratories |
| Noise Level | <45 dB(A) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Dimensions | 43.2 × 48.3 × 27.9 cm (W×D×H) |
| Weight | 22.7 kg |
| Brand | Parker |
|---|---|
| Origin | USA |
| Model Series | NitroFlow Lab, N2-04 / N2-14 / N2-22 / N2-35 / N2-45 / N2-80 / N2-135 |
| Flow Rate Range | 4–467 L/min |
| Nitrogen Purity | ≥99.5% (standard models), up to 99.999% (LCMS-SF series) |
| Technology | Hollow-Fiber Membrane Separation |
| Power Requirement | None (for air-fed split-system configurations) |
| Compliance | Phthalate-free, VOC-free, MS-compatible design |
| Brand | Parker |
|---|---|
| Origin | USA |
| Model | TOC-1250 |
| Gas Output Purity | < 0.1 ppm HC, < 0.5 ppm CO₂ |
| Flow Rate | Up to 12 L/min |
| Operating Pressure | 5–10 bar (adjustable) |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Dimensions (W×D×H) | 320 × 500 × 580 mm |
| Weight | 28 kg |
| Compliance | CE, UL 61010-1, ISO 8573-1 Class 1 for hydrocarbons and CO₂ |
| Brand | Parker |
|---|---|
| Origin | USA |
| Model | UHPN2-1100UK / HPN2-2000UK |
| Flow Rate | 1.1 L/min (UHPN2-1100UK), 2.0 L/min (HPN2-2000UK) |
| Purity | 99.9999% (UHPN2-1100UK), 99.99% (HPN2-2000UK) |
| Input | Compressed Air |
| Certification | CE, UKCA, ISO 9001-compliant design |
| Dimensions | Compact benchtop footprint (<450 mm W × 400 mm D × 500 mm H) |
| Power Supply | 100–240 VAC, 50/60 Hz |