Pharma-test
Filter
Showing all 17 results
| Brand | Pharma Test |
|---|---|
| Origin | Germany |
| Model | PT-TD300 |
| Standards Compliance | USP <616> Method 1 & 2, EP <2.9.34>, DIN EN ISO 787-11, ASTM B527 |
| Sample Weight Input | Via Connected Balance (RS-232 or USB) |
| Density Calculation | Apparent Density, Tapped Density, Hausner Ratio, Carr Index |
| Output | Integrated Thermal Printer, USB Flash Drive Export (Methods & Reports) |
| Software Architecture | Standalone Embedded System with GLP-Compliant Audit Trail |
| Regulatory Alignment | Designed for GMP/GLP Laboratories, Supports 21 CFR Part 11 Readiness (User Authentication, Electronic Signatures Optional via Firmware Update) |
| Brand | Pharma Test |
|---|---|
| Origin | Germany |
| Model | PTG-S5 |
| Instrument Type | Fully Automated Powder Flowability Analyzer |
| Standards Compliance | USP <1174>, EP <2.9.36>, EP <2.9.16>, ISO 4324 (1983) |
| Funnel Volume | 450 mL |
| Heap Angle Range | 1–65° |
| Heap Volume Range | 0.1–275 mL |
| Bulk Density Range | 0–6.0 g/mL |
| Sample Mass Range | 1 mg–325 g |
| Flow Time Range | 0.1–999 s |
| Nozzle Orifices | 6, 8, 10, 15, 25 mm |
| Display | 7-inch color touchscreen |
| Dimensions (L×W×H) | 50 × 55 × 90 cm |
| Construction | Electropolished stainless steel housing |
| Software | 21 CFR Part 11 compliant with audit trail, electronic signatures, and secure data storage |
| Brand | Pharma Test |
|---|---|
| Origin | Germany |
| Model | SPT-6 |
| Compatibility | PTZ AUTO, PTZ AUTO EZ, PTZ-S tablet disintegration testers |
| Operation Mode | Immersion-based thermal penetration measurement |
| Sample Capacity | 6 positions |
| Bath Integration | Standalone Plexiglas water bath or integrated into PTZ platforms |
| Automation | Auto-detection and reporting of softening time when used with PTZ AUTO EZ series |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | ASP2000 |
| Instrument Type | Offline Dissolution System with Online Detection Capability |
| Sampling Capacity | 50 positions |
| Online Dilution Ratio | up to 1:100 |
| Compatible Detection Methods | UV-Vis Spectrophotometry and HPLC |
| Control Software | WinDiss32 |
| Integration | Designed for seamless coupling with all Pharma-test dissolution testers (e.g., PT-DT series) |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | ADS |
| Configuration | 12-Position Auto-Sampler with Peristaltic Pump & UV-Vis Spectrophotometer Integration |
| Software | Win DISS 32 (21 CFR Part 11 Compliant) |
| UV Cell Options | 8- or 16-cell carousel, pathlengths 0.1–20 mm |
| Pump Type | IPC8/IPC16 Multi-Channel Peristaltic Pump |
| Regulatory Alignment | ASTM USP <711>, EP 2.9.3, JP 17, FDA Guidance for Industry |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | DFC1220SP |
| Instrument Type | Offline Dissolution Tester |
| Configuration | Includes PTWS 1220 dissolution bath, PTFC-16 fraction collector, two PT-SP8 syringe pumps (or optional Ismatec peristaltic / CAT piston pumps), EPE-1220 automated sampling system or in-situ probe, ITM-1220 inline temperature monitoring (optional), TM-1220/TMA-1220 tablet drop alignment module (optional), PT-RP80 thermal printer (optional) |
| Compliance | USP <711>, USP <724>, Ph. Eur. 2.9.3 & 2.9.4 |
| Brand | Pharma-Test |
|---|---|
| Origin | Germany |
| Model | PTB 330 |
| Compliance | USP <1217>, Ph. Eur. 2.9.8 |
| Test Modes | Linear Force Ramp & Linear Speed Ramp |
| Output Parameters | Hardness (N), Thickness (mm), Width (mm), Diameter/Length (mm), Mass (g, via external analytical balance) |
| User Authentication | Integrated Fingerprint Sensor |
| Data Management | Onboard Statistics (Mean, SD, RSD, Min/Max), Force-Profile Printing, Multi-Point Validation Protocol |
| Interface | Graphical Touchscreen GUI with Contextual Guidance |
| Connectivity | Optional Ethernet/Wi-Fi Network Integration |
| Mechanical Design | Dual-axis motorized actuator with calibrated load cell and precision linear encoder |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTB 500 |
| Compliance | USP <1217>, EP <2.9.8> |
| Test Modes | Dual-force (linear speed increase & linear force increase) |
| Measured Parameters | Hardness, Thickness, Width, Diameter/Length, Weight (via external analytical balance) |
| Integrated Components | Sample carousel, GUI-controlled actuation, statistical engine, network interface |
| Validation | Built-in multi-point validation protocol |
| Output | Force–displacement curve, full statistical summary (mean, SD, RSD, min/max), configurable print/export |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTF 10E / PTF 20E |
| Drum Configuration | Single-drum (PTF 10E) or Dual-drum (PTF 20E) |
| Rotation Speed | Fixed at 25 rpm (standard), adjustable 1–9999 rpm (ER variants) |
| Test Duration Range | 1–9999 seconds |
| Rotation Count Range | 1–9999 revolutions |
| Drum Material | Acrylic glass (PMMA), optional anti-static coating |
| Drum Angle | Standard 0° |
| Compliance | USP <1216>, Ph. Eur. <2.9.7>, JP <6.07> |
| Construction | Full stainless-steel housing (AISI 304) |
| Documentation | Factory-supplied IQ/OQ protocols included |
| Interfaces | RS232 serial port, parallel printer interface |
| GMP/GLP Conformance | Designed and validated for regulated pharmaceutical QC environments |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTF 200 |
| Drum Configuration | Dual-drum |
| Speed Range | 15–100 rpm |
| Operating Modes | Fixed revolutions or fixed time |
| Calibration Reminder | Programmable interval timer |
| Data Export | USB flash drive support |
| Sample Discharge | Automatic |
| Balance Interface | RS-232/USB for analytical balance integration |
| Compliance | USP <1216>, Ph. Eur. <2.9.7>, JP <14> |
| Optional | Built-in thermal printer |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTF 110 / PTF 210 / PTF 310 / PTF 610 |
| Drum Configuration | 1 / 2 / 3 / 6 drums |
| Construction | Brushed stainless steel housing |
| Drum interchangeability | Fully compatible across PTF 100–600 and PTF 110–610 generations |
| Compliance | Designed to meet USP <1216>, EP 2.9.7, and JP 6.05 requirements |
| Connectivity | PT-Node network adapter optional |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTS 3E |
| Sample Capacity | 3 units simultaneously |
| Temperature Range | 30–40 °C |
| Temperature Accuracy | ±0.5 °C (typical for pharmacopeial disintegration systems) |
| Water Bath Volume per Station | 1.2 L |
| Test Duration Range | 1 min – 10 h |
| Flip Cycle Interval | 1–10 min (programmable 180° rotation) |
| Acoustic Emission | <35 dB(A) (fully silent operation) |
| Heating System | PTC ceramic with overheat protection |
| Grease-Resistant Sealing | Integrated hydrophobic barrier at sample holder interface |
| Compliance | Designed to meet USP <701>, Ph. Eur. 2.9.1, and JP 6.05 disintegration requirements |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTWS 1420 |
| Instrument Type | Offline Dissolution Tester |
| Number of Vessels | 14 |
| Temperature Range | 25–45 °C |
| Temperature Accuracy | ±0.2 °C |
| Rotational Speed Range | 25–250 rpm |
| Paddle Wobble | ≤0.2 mm |
| Basket Wobble | ≤0.2 mm |
| Water Bath Temperature Resolution | ±0.2 °C |
| Water Bath Volume | 0.5 m³ |
| Brand | Pharma-test |
|---|---|
| Origin | USA |
| Model | PTWS 1420 |
| Configuration | Dual-motor independent paddle/stirrer control |
| Test Stations | 14 dissolution vessels + 2 auxiliary heating/medium reservoir vessels |
| Compliance | USP <711>, <724>, EP 2.9.3 & 2.9.4, BP, DAB, JP 15 |
| Temperature Monitoring | Individual cup-level ITM sensors |
| Automated Sampling | EPE robotic arm with precise Z-axis immersion and positioning |
| Dosing | TMA automatic tablet/capsule drop module |
| Drive System | Monoshaft™ single-shaft universal adapter for USP Apparatus 1 (basket), 2 (paddle), 5 (paddle-over-disk), and 6 (cylinder) |
| Method Storage | Unlimited protocols via SD card |
| Calibration & Qualification | Built-in OQ/PQ reminder, pre-run self-diagnostic (optical + audible feedback) |
| Fluid Handling | DSR-M 13-channel piston pump with LCD display, 20-sample capacity, HPLC vial/tube rack compatibility |
| Thermal System | 1500 W rapid-heating water bath with removable tank, diffuser-assisted uniformity, low-volatility vessel lids |
| Connectivity | USB remote control, RS232 printer interface |
| Acoustic Design | Low-noise, vibration-damped recirculating pump |
| Software Features | User management, method management, stepwise manual start, audit-ready event logging |
| Brand | Pharma-test |
|---|---|
| Origin | USA |
| Model | PTWS 1420 |
| Configuration | Dual-drive, 14-vessel dissolution system with independent paddle/stirrer speed control per side |
| Compliance | Fully compliant with USP <711>, <724>, EP <2.9.3>, <2.9.4>, BP, DAB, and JP <15> |
| Vessel capacity | 14 test positions + 2 auxiliary temperature-controlled media reservoirs |
| Temperature monitoring | Individual cup-level ITM sensors (±0.2 °C accuracy) |
| Automated dosing | TMA tablet drop module |
| Sampling system | EPE robotic autosampler with precise XYZ positioning and immersion depth control |
| Drive architecture | Monoshaft™ single-shaft design for seamless USP Apparatus 1 (basket), 2 (paddle), 5 (paddle-over-disk), and 6 (cylinder) interchangeability without re-heighting |
| Method storage | Unlimited methods via SD card with user-accessible encryption and audit trail metadata |
| Pump system | DSR-M 13-channel piston pump with LCD interface, 20-sample programmable sequence, compatible with standard HPLC vials and tube racks (2–20 mL) |
| Water bath | 1500 W rapid-heating stainless-steel bath with detachable design, integrated diffuser for ±0.1 °C thermal uniformity across all vessels |
| Acoustic & vibration performance | Low-noise circulation pump with anti-vibration mounting |
| Pre-run diagnostics | Integrated self-test with visual LED indicators and audible status tones |
| Qualification support | Built-in OQ/PQ checklist prompts and timestamped event logging |
| Connectivity | USB host for PC remote operation |
| Safety & ergonomics | Low-volatility vessel lids, step-start manual mode, dual-motor left/right independent drive control |
| Software compliance | Audit-trail-enabled method execution logs meeting FDA 21 CFR Part 11 requirements for electronic records and signatures |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTWS 610 |
| Configuration | 8-position, single-drive dissolution apparatus |
| Regulatory Compliance | USP <711>, USP <724>, Ph. Eur. 2.9.3 & 2.9.4, JP <15>, ChP |
| Temperature Control Range | 37.0 ± 0.2 °C (typical operating condition) |
| Sampling Mechanism | Automated timed sampling with optical/audible alerts |
| Data Storage | SD card (user-replaceable, FAT32 formatted) |
| User Access Control | Role-based login (administrator, operator, reviewer) |
| System Diagnostics | Power-on self-test (POST), real-time status monitoring via tri-color LED indicator |
| Calibration & Qualification Support | Built-in OQ/PQ reminder logic, audit-ready event logging |
| Brand | Pharma-test |
|---|---|
| Origin | Germany |
| Model | PTWS 820D |
| Instrument Type | Online Dissolution Tester |
| Compliance | USP <711>, USP <724>, EP 2.9.3/2.9.4, ChP (Chinese Pharmacopoeia), JP |
| Vessel Options | 250 mL, 1 L, 2 L, 4 L |
| Construction | Stainless Steel (GLP-compliant) |
| Automation Level | Fully Automated Online System with Integrated Sampling |
| Sampling Mechanism | EPE Robotic Arm with Precise Z-axis Positioning |
| Stirring Stations | 8 Independent Vessels |
| Method Storage | Unlimited Methods via USB |
| Validation Support | IQ/OQ/PQ Documentation & Services Available |
| Temperature Uniformity | Optimized Water Bath with Diffuser & Low-Noise Circulation Pump |
| Connectivity | USB (Remote Control & Data Export), RS232 (Printer Interface) |
| User Management | Password-Protected Role-Based Access |
| System Diagnostics | Pre-run Self-Check Routine |
| Alert System | Visual (LED) and Audible Status Indication |
| Cleaning | Removable Bath Assembly & Dedicated System Rinse Kit |