PMM
Filter
Showing all 5 results
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 1000 |
| Processor | Motorola DSP56002 & Intel 80C186/187 |
| Input Resolution | 18-bit per channel |
| ADC Interface | IEEE-488 (GPIB) |
| Self-test | On power-up |
| Power Supply | 180–250 VAC / 90–125 VAC, 50–60 Hz |
| Max Power Consumption | 40 W |
| Dimensions | 460 × 448 × 132 mm |
| Weight | 12 kg |
| Operating Temperature | 0–50 °C |
| Storage Temperature | −20–80 °C |
| Storage Humidity | ≤92% RH, non-condensing |
| Software Platform | Windows-based |
| Harmonic Standards Compliance | IEC 61000-3-2, IEC 61000-3-4, IEC 61000-4-7, IEC 555-2 |
| Flicker Standards Compliance | IEC 61000-3-3 (replaces IEC 1000-3-3), IEC 60468 (Amend. 1), IEC 60555-3 (Amend. 1), IEC 60868 (Amend. 1) |
| Voltage Input Range | 90–300 Vrms (flicker: 40–504 Vrms) |
| Current Input Range | 5 mA–16 A (shunt ranges: 0.16 / 0.8 / 4 / 20 A) |
| Voltage Channel Input Impedance | >8 MΩ |
| Current Channel Impedance | <3.03 mΩ (max range) |
| Max Potential Difference | 150 mV |
| Accuracy | Better than ±0.2% for harmonics |
| Anti-aliasing Filter Attenuation | 70 dB |
| Transient Harmonic Smoothing | Low-pass filter, 1° phase shift (1.5 s period) |
| Measurement Modes | Single-shot, time-limited, continuous |
| Data Storage | Ring-buffer architecture retaining last 2.5 minutes of continuous measurement |
| FFT Points | 2048 |
| Frequency Range | 45–65 Hz (extendable to 16–2500 Hz) |
| Flicker Metrics | Pst, Plt, Pmax, P50%, P10%, P3%, P1%, P0.1%, CPF, d(t), dmax, dc |
| Voltage Fluctuation Resolution | ±2% error for d(t) and dmax |
| AC Power Supply Options | TPS 1500 (1-phase, 1.5 kVA), TPS-K10 (3-phase, 10 kVA), TPS-K20 (3-phase, 20 kVA) |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 1008 |
| Generator Output | 160 A (continuous), 1200 A (transient) |
| Continuous Field Levels | 1–100 A/m (IEC/EN 61000-4-8 Classes 1–5) |
| Transient Field Levels | 300–1000 A/m |
| Coil Dimensions | 1.035 m × 1.035 m × 35 mm |
| Antenna Factor | 0.87 |
| Coil Inductance | ~0.6 µH |
| Coil Resistance | 670 µΩ |
| Generator Dimensions (W×D×H) | 385 × 215 × 400 mm |
| Generator Weight | 28 kg |
| Coil + Trolley + Stand Total Weight | 50 kg |
| Power Supply | 198–264 V AC, 50/60 Hz |
| Interface | RS232/RS485 (DB9) |
| Safety | Interlock-enabled, thermal cutoff, ≤4 Vrms open-circuit voltage |
| Compliance | IEC/EN 61000-4-8, EU Directives 89/336/EEC & 73/23/EEC |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM 9010 |
| Frequency Range | 10 Hz – 30 MHz (expandable to 3 GHz / 6 GHz) |
| Weight | 4 kg (main unit) |
| Power Supply | DC battery-operated (integrated Li-ion) |
| Compliance | Fully compliant with CISPR 16-1-1:2023, EN 55016-1-1, MIL-STD-461G, DO-160G, FCC Part 15/18 |
| Calibration Architecture | Fully digital signal path with built-in RF self-calibration source |
| Detection Modes | Peak, Quasi-Peak, Average, RMS, CISPR-Average, CISPR-RMS |
| RBW Filters | Digital implementation per CISPR 16-1-1 (200 Hz, 9 kHz, 120 kHz, 1 MHz) |
| Software Control | Native Narda STS EMCO software |
| Module Architecture | Pre-calibrated hot-swap functional modules (e.g., click noise analyzer, LISN interface, near-field probes) |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Model | PMM CA0010 |
| Frequency Range | 150 kHz – 30 MHz |
| Frequency Accuracy | ±100 Hz |
| Amplitude Range | 20 dBµV – 95 dBµV |
| Amplitude Accuracy | ±0.1 dB |
| Pulse Rise Time | ≥100 µs |
| Pulse Interval | ≥100 µs |
| Time Step Resolution | 10 µs |
| Pulse Repetition Rate | 1 Hz – 500 Hz |
| Repetition Rate Accuracy | ±1 Hz |
| Amplitude Flatness | ≤1.8 dB (150 kHz – 30 MHz) |
| Amplitude Resolution | 0.1 dB |
| Max Input Level | 140 dBµV (2 W) |
| Built-in LISN | Single-phase, 16 A, compliant with CISPR 16-1-2 (150 kHz – 30 MHz) |
| RF Connector | BNC (F) |
| Operating Temperature | −5 °C to +45 °C |
| Dimensions | 235 mm × 105 mm × 335 mm |
| Weight | 4.1 kg |
| Standards Compliance | CISPR 16-1-1, CISPR 16-1-2, CISPR 14-1 |
| Dynamic Range Enhancement | Integrated preselector |
| Signal Generation Capabilities | CW, click, and CISPR pulse signals |
| Software Resolution | 500 µs QP detection, full IF bandwidth display |
| Brand | PMM |
|---|---|
| Origin | Italy |
| Type | RF Power Amplifier |
| Power Range | 15 W to 10,000 W |
| Compression Point | 1 dB typical |
| Stability | High long-term amplitude and phase stability |
| Configuration | Benchtop or rack-mountable (model-dependent) |