Scientz
Filter
Showing 1–30 of 45 results
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | General-Purpose Ultrasonic Cleaner |
| Tank Capacity | 30 L |
| Ultrasonic Frequency | 40 kHz (Sweep Mode) |
| Ultrasonic Power Output | 840 W |
| Power Adjustment | Yes (40–99% in 1% increments) |
| Heating Range | Ambient to 80 °C |
| Timer Range | 1–999 min |
| Sound-Dampening Lid | Included |
| Auto Fill/Drain Port | Equipped |
| Frequency Options | Four selectable frequencies with independent time settings per frequency |
| Display | Digital LED showing real-time temperature and remaining time |
| Safety | Power interruption memory function |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | SCIENTZ-08-II |
| Instrument Type | Non-contact ultrasonic cell disruptor (cup-horn system) |
| Operating Frequency | 40 kHz |
| Adjustable Ultrasonic Power | 1800 W |
| Sample Volume Range | 5 µL – 15 mL |
| Sample Capacity | 1–16 tubes |
| Power Adjustment Range | 1–99% |
| Timer Range | 1–999 min |
| Duty Cycle | 0.1–99.9% |
| Tank Volume | 1.5 L |
| Compatible Vessel Formats | 1–2 mL × 16 wells, 5 mL × 8 wells, 10–15 mL × 8 wells |
| Temperature Monitoring | Yes |
| Input Voltage | 220/110 V ±0.5%, 50/60 Hz |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Manifold Benchtop Freeze Dryer |
| Application Scale | Pilot-Scale |
| Freeze-Drying Area | 0.12 m² |
| Ultimate Vacuum | ≤5 Pa |
| Condensate Capacity (24 h) | 4 kg/batch |
| Cold Trap Temperature | ≤−56 °C |
| Dimensions (L×W×H) | 600 × 450 × 720 mm + 440 mm (condenser height) |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | Scientz-25T |
| Instrument Type | Standard Shelf-Type Freeze Dryer |
| Application | Laboratory-Scale Lyophilization |
| Freeze-Drying Area | 2.5 m² |
| Ultimate Vacuum | ≤10 Pa |
| Condensate Capacity (24 h) | 15 kg/24 h |
| Cold Trap Temperature | ≤ −85 °C |
| Dimensions (W×D×H) | 2300 × 1200 × 2200 mm |
| Control System | PLC + Touchscreen HMI |
| Data Compliance | FDA 21 CFR Part 11–Ready Audit Trail & Exportable Log Files |
| Refrigeration Technology | Single-Unit Self-Contained Cascade Refrigeration System |
| Valve Actuation | Individual Silicone Rubber Stopper Valves per Flask |
| Optional Accessories | Customizable Flask Racks, Glass Vials, Vacuum Inlet Nozzles, Nitrogen Backfill Valve |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | SCIENTZ-500C |
| Max Ultrasonic Power | 900 W |
| Ultrasonic Frequency | 22 ± 1 kHz |
| Max Heating Power | 1000 W |
| Temperature Range | 0–99 °C |
| Bath Volume | 6 L |
| Probe Diameter | Φ10 mm |
| Power Adjustment Range | 15–100% |
| Sonication Time Setting | 1–999 min (with pulse mode: on-time 1–99 s, off-time 1–99 s) |
| Cooling Compressor Power | 500 W |
| Temperature Stability | ≤ ±1 °C |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | THT-1350 |
| Pricing | Available Upon Request |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | CFU-750W-M1 |
| Instrument Type | Ultrasonic Cell Disruptor |
| Operating Frequency | 20 kHz ± 1 kHz |
| Ultrasonic Power Output | 750 W |
| Temperature Control Range | −30 °C to 100 °C |
| Sample Throughput | 1–50 L/h |
| Reactor Material | SUS316 Stainless Steel |
| Transducer & Horn Material | Titanium Alloy (Grade 5) |
| Control Interface | 10-inch Capacitive Touchscreen |
| Data Logging | Internal storage with USB export |
| Communication Protocol | Modbus-TCP over RJ45 Ethernet |
| User Access Control | Three-tier permission system (Admin / Operator / Guest) |
| Sterilization Compatibility | In-situ steam sterilization (SIP) or offline autoclaving (121 °C, 2 bar, 30 min) |
| Cooling Architecture | Double-jacketed reactor with external chiller integration (e.g., DC-3006) |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | CSD01 |
| Pricing | Available Upon Request |
| Drum Internal Diameter | 286 mm |
| Drum Depth | 39 mm |
| Rotational Speed | 25 ± 1 rpm |
| Arc Baffle Inner Diameter | 80 ± 1 mm |
| Test Duration Range | 0–9 h 59 min 00 s |
| Rotation Count Range | 0–99,999 revolutions |
| Time Resolution | 1 second |
| Revolution Resolution | 1 revolution |
| Power Consumption | 20 W |
| Supply Voltage | AC 220 V, 50 Hz |
| Dimensions (W × D × H) | 440 × 286 × 350 mm |
| Net Weight | 10 kg |
| Brand | SCIENTZ |
|---|---|
| Origin | Zhejiang, China |
| Model | DC-0520 |
| Bath Volume | 20 L |
| Temperature Range | −5 to 100 °C |
| Temperature Stability | ±0.1 °C |
| Control Mode | PID with Microprocessor |
| Display | 7-inch Tilted Touchscreen |
| Pump Flow Rate | 0–15 L/min (adjustable) |
| Maximum Pump Pressure | 0.45 bar |
| Refrigeration Capacity (at 25 °C) | 1.25 kW |
| Heating Power | 3.6 kW |
| Total Power Consumption | 3.6 kW/h |
| External Dimensions (L×W×H) | 455×430×935 mm |
| Safety Features | Compressor Overheat & Overload Protection |
| Environmental Refrigerant | R134a or equivalent HFC-based refrigerant compliant with EU F-Gas Regulation |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | DC-4015 |
| Temperature Range | −40 to 100 °C |
| Bath Volume | 15 L |
| Temperature Stability | ±0.1 °C |
| Control System | Microprocessor-based PID with 7-inch touchscreen interface |
| Refrigerant | Environmentally compliant (R-404A or equivalent) |
| Pump Flow Rate | 0–15 L/min (adjustable) |
| Maximum Pump Pressure | 0.45 bar |
| Cooling Capacity at 25 °C | 1.24 kW |
| Heating Power | 1.55 kW |
| Total Power Consumption | 2.5 kW |
| External Dimensions (L×W×H) | 455×430×865 mm |
| Safety Features | Compressor overheat and overload protection, auto-restart after power recovery, programmable timer shutdown |
| Brand | SCIENTZ |
|---|---|
| Origin | Zhejiang, China |
| Model | DLK-2003 |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Water-Cooled |
| Temperature Range | −20 °C to +45 °C |
| Temperature Stability | ±2 °C |
| Refrigeration Capacity | 782 W (at 25 °C ambient) |
| Circulation Pump Flow Rate | 20 L/min |
| Maximum Pump Pressure | 1.2 bar |
| Display Resolution | 0.1 °C |
| Reservoir Volume | 3 L |
| Noise Level | ≤57 dB(A) |
| Power Consumption | 0.55 kW |
| Dimensions (L×W×H) | 390×423×445 mm |
| Weight | 29 kg |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | DLK-5001 |
| Instrument Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled |
| Temperature Range | –10 °C to 25 °C |
| Refrigeration Capacity | 1000 W at 20 °C |
| Temperature Stability | ±0.5 °C |
| Circulation Pump Pressure | 0.04 MPa |
| Circulation Flow Rate | 15 L/min |
| Reservoir Volume | 15 L |
| Operating Mode | Continuous Duty |
| Display Resolution | 0.1 °C |
| Max. Flow Rate | 20 L/min |
| Max. Pump Pressure | 1.2 bar |
| Noise Level | ≤55 dB(A) |
| Power Input | 0.2 kW |
| Dimensions (L×W×H) | 260×340×300 mm |
| Weight | 18 kg |
| Power Supply | 220 V / 50 Hz |
| Brand | Scientz |
|---|---|
| Origin | Shanghai, China |
| Model | DLK-5003 |
| Cooling Type | Water-cooled |
| Temperature Range | −5 °C to 45 °C |
| Refrigeration Capacity | 0.76 kW at 45 °C |
| Pump Pressure | 1.2 bar |
| Flow Rate | 20 L/min |
| Reservoir Volume | 3 L |
| Temperature Stability | ±2 °C |
| Display Resolution | 0.1 °C |
| Power Input | 0.55 kW |
| Voltage/Frequency | 220 V / 50 Hz |
| Noise Level | ≤57 dB(A) |
| Dimensions (W×L×H) | 390 × 423 × 445 mm |
| Weight | 29 kg |
| Connection Port | G1/2″ internal thread |
| Brand | SCIENTZ |
|---|---|
| Origin | Zhejiang, China |
| Model | FY-SPRAY Mini |
| Max. Feed Rate | 1800 mL/h |
| Inlet Temp. Range | 30–250 °C ±1 °C |
| Outlet Temp. Range | 30–150 °C ±1 °C |
| Particle Size Range | 5–50 µm |
| Heating Power | 3.0 kW (220 V) |
| Dryer Tower Material | Borosilicate Glass & AISI 316L Stainless Steel |
| Atomizer | Imported Dual-Fluid Nozzle (0.7 mm Orifice) |
| Drying Time | 1.0–1.5 s |
| Automatic Needle Clearing Cycle | 0–60 s Adjustable |
| Dimensions (H×W×D) | 922 × 570 × 470 mm |
| Weight | 58 kg |
| Power Supply | 220/230 V, 50–60 Hz |
| Total Rated Power | 3.6 kW |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | HL25-220-2T Series |
| Temperature Control Range | -25 °C to 200 °C |
| Temperature Stability (Bath Medium) | ±0.5 °C |
| Temperature Accuracy (Process Load) | ±1 °C |
| Control Interface | 7-inch Color Touchscreen with Real-time Temperature Curve Display & Logging |
| Control Algorithm | PID Fuzzy Logic |
| Communication Protocol | MODBUS RTU over RS-485 |
| Temperature Feedback Points | Three PT100 Sensors (Unit Internal Temp, Outlet Temp, External Process Temp) |
| Programmability | Up to 5 Programs, Each with 30 Segments |
| Differential Temperature Control | Adjustable ΔT between Jacket and Process Material |
| Safety Protections | Compressor Overload Protection, High-Pressure Switch, Thermal Overload Relay, Low-Level Fluid Sensor, Over-Temperature Cut-off, Sensor Fault Detection |
| System Design | Fully Sealed Closed-Loop Circulation (No Oil Mist at High Temp |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | HL25W-820 Series |
| Temperature Control Range | −80 °C to 200 °C |
| Temperature Accuracy (Heat Transfer Medium) | ±0.5 °C |
| Temperature Accuracy (Process Material) | ±1.0 °C |
| Display Interface | 7-inch color touchscreen with real-time temperature curve visualization and logging |
| Control Algorithm | PID-based fuzzy logic control |
| Communication Protocol | MODBUS RTU over RS-485 |
| Max. Operating Medium Temperature | 200 °C |
| Min. Operating Medium Temperature | −25 °C |
| Programmability | Up to 5 multi-step programs, each supporting up to 30 segments |
| Temperature Feedback Points | Three PT100 sensors — chiller internal temperature, outlet fluid temperature, and external process material temperature |
| Safety Protections | Compressor overload protection, high-pressure switch, thermal relay, overtemperature sensor fault detection, low-fluid-level alarm, and integrated self-diagnostic system |
| System Design | Fully sealed closed-loop circulation |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | HSC-2015L |
| Instrument Type | Benchtop Centrifuge |
| Cooling Function | Refrigerated Centrifuge |
| Rotor Configuration | Horizontal (Swinging-Bucket) Rotor |
| Max. Capacity | 24 × 1.5/2.0 mL tubes, 4 × PCR 8-tube strips, 12 × 5 mL tubes |
| Max. Speed | 15,000 rpm |
| Max. RCF | 21,400 × g (at 15,000 rpm) |
| Temperature Range | –10 °C to +40 °C |
| Cooling Performance | Reaches 4 °C from ambient in <6 min |
| Acceleration Time (0→15,000 rpm) | ≤15 s (Soft Off mode), ≤45 s (Soft On mode) |
| Deceleration Time (15,000 rpm→0) | ≤15 s (Soft On mode), ≤45 s (Soft Off mode) |
| Speed Increment | 100 rpm steps (500–15,000 rpm) |
| Timer Range | 1 s – 99 min 59 s |
| Noise Level | <58 dB(A) |
| Dimensions (L×W×H) | 385 × 608 × 318 mm |
| Power Supply | 1000 W max / 500 W nominal |
| Rotor Lid | Metal, hermetically sealed |
| Chamber Finish | Corrosion-resistant electrostatically coated surface |
| Braking Mode | SOFT deceleration for sensitive sample integrity |
| Safety Features | Automatic rotor recognition (optional), lid interlock, overspeed/overtemperature/failure self-diagnosis, emergency door release under power loss |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | JY88-IIN |
| Instrument Type | Ultrasonic Cell Disruptor |
| Temperature Range | 0–99.9 °C |
| Operating Frequency | 20–25 kHz |
| Ultrasonic Power Output | 250 W (adjustable from 1% to 100%) |
| Sample Volume Capacity | 10–200 mL |
| Display | 7-inch Touchscreen Interface |
| Duty Cycle Range | 0.1–99.9% |
| Standard Probe | 6 mm titanium alloy (TC4) horn |
| Optional Probes | 2 mm, 3 mm, 10 mm |
| Safety Features | Overtemperature, overload, and timer alarms |
| Dimensions (Main Unit) | 430 × 245 × 300 mm |
| Weight (Unit + Transducer) | 8.5 kg |
| Optional Acoustic Enclosure Dimensions | 345 × 345 × 535 mm |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | LGW-280 |
| Chamber Volume | 307 L |
| Heating Power | 6 kW |
| Temperature Range | Ambient to 95 °C |
| External Dimensions (L×W×D) | 710 × 933 × 1445 mm |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | MDS-2008DS |
| Instrument Type | Offline Dissolution Tester |
| Vessel Capacity | 6 or 8 vessels |
| Temperature Accuracy | ±0.2°C |
| Temperature Resolution | 0.1°C |
| Water Bath Range | Ambient to 45.0°C |
| Rotational Speed Range | 10.0–300.0 rpm |
| Rotational Speed Resolution | 0.1 rpm |
| Rotational Speed Accuracy | ±0.5 rpm |
| Basket/Shaft Wobble | ≤0.5 mm |
| Basket Wobble | ≤1.0 mm |
| Shaft-to-Vessel Axis Deviation | ≤±1.5 mm |
| Levelness | ≤0.2° |
| Shaft Verticality | 90° ±0.5° |
| Vessel Options | 250 mL and 1000 mL (amber option available) |
| Compliance | USP <711>, EP 2.9.3, ChP 0931 |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | MGC-500 |
| Pricing | Available Upon Request |
| Brand | Scientz |
|---|---|
| Model | RTD-2010 |
| Heating Range | 25–45.0 °C (Max ΔT = 15 °C) |
| Temperature Resolution | 0.1 °C |
| Temperature Control Accuracy | ±2 °C |
| Volume Resolution | 0.1 mL |
| Volumetric Accuracy | ≤±1 % @ 1000 mL |
| Degassing Rate | ≈1000 mL/min |
| Vacuum Resolution | 0.1 kPa |
| Ultimate Vacuum | ≤−90 kPa |
| Power Supply | 220 VAC ±10%, 1100 W |
| Dimensions | 530 × 300 × 560 mm |
| Weight | 23 kg |
| Dissolved Oxygen Target | ≤2.8 mg/L |
| EMC Compliance | IEC 61000-4-2, -4-4, -4-5, -4-11 |
| Operating Temp | 5–40 °C |
| Storage Temp | −20–60 °C |
| Operating Humidity | 20–80 % RH |
| Storage Humidity | 5–95 % RH |
| Brand | Scientz |
|---|---|
| Model | RTD-2010 |
| Technology | Hydrophobic Hollow-Fiber Vacuum Membrane Degassing |
| Temperature Control Range | Ambient to 45 °C (±0.5 °C) |
| Degassing Efficiency | >95% dissolved O₂ removal |
| Flow Rate | Up to 2.0 L/min |
| Capacity | 1000 mL per cycle (±1% volumetric accuracy) |
| Compliance | Meets ChP <0901> for Dissolution Medium Preparation |
| Data Integrity | Audit Trail Enabled |
| Interface | 7-inch TFT Color Touchscreen with Local Log Storage |
| Power Supply | 220 V AC, 50/60 Hz |
| Brand | SCIENTZ |
|---|---|
| Origin | Zhejiang, China |
| Model | SB-100DT |
| Tank Capacity | 4.5 L |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 100 W |
| Heating Power | 200 W |
| Temperature Range | Ambient to 80 °C |
| Timer Range | 1–99 min |
| Drain Port | Yes |
| Brand | Scientz |
|---|---|
| Origin | Tianjin, China |
| Model | SB-1800DT |
| Tank Capacity | 108 L |
| Ultrasonic Frequency | 28 kHz |
| Ultrasonic Power Output | 1800 W |
| Heating Range | Ambient to 80 °C |
| Timer Range | 1–99 min |
| Heating Power | 4000 W |
| Tank Dimensions (L×W×H) | 600 × 600 × 300 mm |
| Drain Valve | Yes |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | SB-3200D |
| Tank Capacity | 6 L |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 180 W |
| Timer Range | 1–999 min |
| Construction | Stainless Steel Inner & Outer Tank with Sound-Dampening Lid |
| Safety Feature | Auto Power-Off Protection with Parameter Memory |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | SB-4200DT |
| Tank Capacity | 14.4 L |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 480 W |
| Heating Range | Ambient to 80 °C |
| Timer Range | 1–999 min |
| Heating Power | 800 W |
| Tank Dimensions (L×W×H) | 300 × 240 × 200 mm |
| Drain Valve | Yes |
| Brand | SCIENTZ |
|---|---|
| Origin | Zhejiang, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | SB-50 |
| Instrument Type | General-Purpose |
| Tank Capacity | 0.8 L |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power Output | 50 W |
| Timer Range | 1–120 min |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | SB-5200DTD |
| Tank Capacity | 10 L |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power Output | 360 W |
| Power Adjustment Range | 40–100% |
| Heating Temperature Range | Ambient to 80 °C |
| Timer Setting Range | 1–999 minutes |
| Built-in Drain Valve | Yes |
| Heating Power | 500 W |
| Brand | Scientz |
|---|---|
| Origin | Zhejiang, China |
| Model | SB25-12D |
| Tank Capacity | 22.5 L |
| Ultrasonic Frequency | 40 kHz |
| Ultrasonic Power | 600 W |
| Timer Range | 1–999 min |
| Drain Valve | Yes |
| External Dimensions | 640 × 395 × 375 mm |
| Construction | Stainless Steel Inner & Outer Tank with Sound-Dampening Lid |