TAMASAKI (Kyoto)
Filter
Showing all 4 results
| Brand | TAMASAKI (Kyoto) |
|---|---|
| Origin | Japan |
| Model | AMS-115 |
| Measurement Principle | Digital Current/Voltage/Time Synchronization |
| Measurement Range | 50 A – 999 kA (selectable) |
| Time Resolution | 1 ms |
| Max Monitoring Duration | 9,000 cycles (180 s for AMS-116) |
| Sampling Frequency | Up to 600 Hz |
| Input Channels | Primary current, secondary voltage, electrode displacement (optional), trigger signal |
| Output Interfaces | RS-232C (standard), digital I/O (optional) |
| Configuration Memory | 32 programmable welding condition sets |
| Compliance | Designed for ISO 14001 & JIS B 8711-compliant resistance welding process validation |
| Brand | TAMASAKI (Kyoto) |
|---|---|
| Origin | Japan |
| Model | SP-270-F200N |
| Measurement Principle | Strain-gauge-based force transduction |
| Measurement Range | 20–200 N (F200N variant) |
| Accuracy | ±1% F.S. |
| Overload Capacity | 120% of rated load |
| Output | DC ±2 V F.S. |
| Display | 4-inch TFT color LCD (Japanese/English selectable) |
| Data Sampling | Up to 1 kHz (1 ms interval) via USB |
| Power Supply | Rechargeable battery or USB bus power |
| Auto-power-off | Configurable timeout |
| Operating Temperature | 5–40 °C |
| Sensor Interchangeable | Yes (F200N, F1000N, F10kN, F30kN, F50kN variants) |
| Dimensions (H×W×D) | 140 × 85 × 35 mm |
| Weight (unit + sensor) | 600 g |
| Compliance | Designed for industrial welding process validation per JIS Z 3140 and ISO 14324 Annex B |
| Brand | TAMASAKI (Kyoto) |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 12 mL, Series 3-52, 100 pcs/box |
| Capacity | 12 mL |
| Material | Polypropylene (PP) |
| Color | White |
| Packaging Dimensions | 195 × 195 × 85 mm |
| Net Weight per Box | 570 g |
| Sterilization Status | Non-sterile |
| Bottom Geometry | Rounded, Low-Residue Design |
| Brand | TAMASAKI (Kyoto) |
|---|---|
| Origin | Japan |
| Model | M6×1.0 GP2-DS2 |
| Thread Type | Metric ISO/JIS General Purpose (M), Pitch: 1.0 mm |
| Class | JIS B 1341 Grade 2 (equivalent to ISO 965-3 Class 2H/2G) |
| Nominal Size | M6×1.0 |
| Gage Body Material | Gauge Steel (SUJ2 hardened and stabilized) |
| Sleeve Material | Anodized Aluminum Alloy |
| Mass | 27.7 g |
| Compliance | JIS B 1341, ISO 965-3, ISO 1502 |
| Application Scope | In-process verification of threaded holes in semiconductor packaging substrates, printed electronics interconnect components, and fine-pitch SMT fixture hardware |