Thermoprobe
Filter
Showing all 8 results
| Brand | Thermoprobe |
|---|---|
| Origin | USA |
| Model | TL1-A |
| Temperature Range | -10°C to 160°C |
| Accuracy | ±0.07°C (-10°C to 160°C), ±0.1°F (14°F to 320°F) |
| Resolution | 0.01°C |
| Operating Ambient Temperature | -20°C to 54°C (-4°F to 130°F) |
| Display | 0.25" LCD |
| Power Supply | 3V CR2032 coin cell battery |
| Probe Length | 20 cm (8"), Probe Diameter: 6.35 mm (1/4"), Tip Diameter: 4.76 mm (3/16") |
| Enclosure | Anodized aluminum housing (3.5" × 12"), silicone-sealed |
| Weight | 93 g (3.3 oz) |
| Auto-off | After 20 minutes of inactivity or continuous operation |
| Units | Switchable °C / °F |
| Sensor Material | Stainless steel |
| Thermal Response Time (in water bath) | 14 seconds |
| Battery Life | ~400 hours at 21°C (70°F) |
| Brand | Thermoprobe |
|---|---|
| Origin | USA |
| Model | TL1-R |
| Temperature Range | -18°C to 150°C |
| Accuracy | ±0.04°C or ±0.07°F |
| Resolution | 0.001°C |
| Operating Ambient Temperature | -20°C to 54°C (-4°F to 130°F) |
| Display | 0.25-inch LCD |
| Power Supply | 3V CR2032 lithium coin cell |
| Probe Length | 20 cm (8 in), Diameter: 6.35 mm (1/4 in) |
| Weight | 124 g |
| Sensor Type | 200 Ω wound-wire Pt RTD |
| Immersion Depth | 11 cm (4 in) |
| Response Time | ≤3 min to ±0.1°C in water bath (0–50°C) |
| Auto-off | After 20 min idle or continuous operation |
| Units | Switchable °C/°F |
| Enclosure | Anodized aluminum housing (3.5" × 12"), silicone-sealed |
| Battery Life | 400 hours at 21°C (70°F) |
| Brand | Thermoprobe |
|---|---|
| Origin | USA |
| Model | TL1-W |
| Temperature Range | -10°C to 160°C |
| Accuracy | ±0.1°F |
| Resolution | 0.01°C |
| Operating Ambient Temperature | -20°C to 54°C (-4°F to 130°F) |
| Display | 0.25-inch LCD |
| Power | 3V CR2032 lithium coin cell battery |
| Probe Length | 20 cm (8 in), Probe Diameter: 6.35 mm (1/4 in), Tip Diameter: 4.76 mm (3/16 in) |
| Enclosure | Aluminum housing (3.5" × 12"), silicone-sealed |
| Weight | 180 g |
| Sensor Type | 100 Ω, Class A 1/3 DIN RTD |
| Immersion Depth | 11 cm (4 in) |
| Stabilization Time in Water Bath | 14 s |
| Battery Life | 400 h at 21°C (70°F) |
| Intrinsic Safety Rating | II 2 G EEx ib IIB T4 |
| Brand | Thermoprobe |
|---|---|
| Origin | USA |
| Model | TL2 |
| Temperature Range | -20 to 150°C |
| Accuracy | ±0.03°C (at ambient, NIST-traceable) |
| Resolution | 0.001°C |
| Display | LCD |
| Power Supply | Internal rechargeable battery (50 h typical life) |
| Operating Ambient Temperature | -20°C to +54°C |
| Enclosure | Powder-coated steel, IP65-rated |
| Dimensions | 184 × 133 × 57 mm (7.25" × 5.25" × 2.25") |
| Weight | 1000 g |
| Sensor Interface | Standard 5-pin DIN connector, compatible with 200 Ω 4-wire RTD probes |
| Compliance | NIST-traceable calibration certificate included |
| Brand | ThermoProbe |
|---|---|
| Origin | Germany |
| Model | TL3 |
| Temperature Range | -40 °C to 204 °C ±0.06 °C |
| Accuracy | ±0.06 °C |
| Resolution | 0.01 °C |
| Operating Ambient Temperature | -20 °C to 54 °C |
| Display | 0.5-inch LCD with low-battery and error indicators |
| Power | CR2032 3 V lithium coin cell |
| Probe Length | 200 mm or 300 mm |
| Probe Diameter | 6.35 mm (shaft), 4.76 mm (tip) |
| Weight | 150 g |
| Stabilization Time in Water Bath | 6.5 s |
| Battery Life | >100 h at 21 °C |
| Battery Operating Temp Range | -20 °C to 54 °C |
| Compliance | NIST-traceable 4-point calibration certificate included |
| Warranty | 1 year |
| Brand | Thermoprobe |
|---|---|
| Origin | USA |
| Model | TP5C |
| Temperature Range | -40°C to +204°C |
| Accuracy | ±0.2°F (-40°F to 200°F), ±0.5°F (200°F to 400°F) |
| Resolution | 0.1°C |
| Operating Ambient Temperature | -20°C to +54°C (-4°F to 130°F) |
| Display | LCD |
| Power Supply | 3V CR2032 coin cell battery |
| Dimensions | 9.5"L × 7.2"H × 1.76"W in (241 mm × 183 mm × 45 mm) |
| Weight | 124 g |
| Probe Material | 304 Stainless Steel |
| Safety Certification | UL Listed for Class I, Division 1, Groups B, C, D |
| Calibration | NIST-traceable 4-point calibration report |
| Brand | Thermoprobe |
|---|---|
| Origin | USA |
| Model | TP7-C |
| Temperature Range | −10 °C to 188 °C (14 °F to 370 °F) |
| Accuracy | ±0.2 °F (32–200 °F), ±0.5 °F (200–300 °F) |
| Resolution | 0.1 °C |
| Operating Ambient Temperature | −20 °C to 54 °C |
| Display | LCD |
| Power | 9 V alkaline battery (≈50 h life) |
| Dimensions | 34.3 × 18.4 × 11.4 cm |
| Weight | 1.4 kg (with 23 m cable) |
| Sensor | Pt100 platinum RTD in stainless steel sheath |
| Cable | FEP/PFA-insulated, aramid-reinforced, static-dissipative jacket |
| Enclosure Materials | Polypropylene blend, stainless steel, aluminum |
| Safety Certification | ATEX II 2 (1) EEx ib[ia] IIB T4 |
| Compliance | API RP 14C, IEC 60079-0/-11, UL 913 Class I, Div 1, Groups B, C, D |
| Brand | Thermoprobe |
|---|---|
| Origin | USA |
| Model | TP9 |
| Temperature Range | -40°C to 204°C |
| Accuracy (Calibrated) | ±0.1°C (0–100°C), ±0.3°C (100–200°C), ±0.5°C (200–204°C) |
| Long-Term Drift | ≤0.05%/year |
| Resolution | 0.1°C |
| Operating Ambient Temperature | -20°C to +54°C |
| Display | LCD |
| Power Supply | 3V CR2032 coin cell battery |
| Dimensions | 254 mm L × 108 mm H × 163 mm W |
| Weight | 2.0 kg |
| Enclosure Material | Anodized aluminum housing with stainless steel fasteners |
| Probe Construction | 304 stainless steel sensor tip, reinforced aramid fiber cable jacket (FEP or PFA), coaxial design |
| Certification | ATEX II 2 (1) EEx ib[ia] IIB T4 |
| Compliance | API RP 14C, NIST-traceable 4-point calibration certificate included |