TOMY
Filter
Showing all 4 results
| Brand | TOMY |
|---|---|
| Origin | Japan |
| Model | MS-100 |
| Drive Type | Brushless Inverter Motor |
| Speed Range | 2000–5500 rpm (100 rpm increments) |
| Time Setting | 1–300 s (1–100 s above 5100 rpm) |
| Sample Capacity | 12 × 2.0 mL tubes |
| Motion Principle | Microprocessor-Controlled 3D Rotational High-Speed Motion (Patented) |
| Safety Features | Lid-Open Detection, Motor Overheat Protection, Abnormal Rotation Detection |
| Display | Backlit LCD |
| Dimensions | 280 W × 320 D × 305 H mm |
| Weight | ~17 kg |
| Power Supply | AC 120 V, 3 A, 50/60 Hz, 1P |
| Brand | TOMY |
|---|---|
| Origin | Japan |
| Model | MV-100 |
| Maximum Speed | 2,600 rpm (50 Hz) / 2,800 rpm (60 Hz) |
| Maximum RCF | 400 × g (50 Hz) / 465 × g (60 Hz) |
| Capacity | 12 × 1.5 mL tubes |
| Drive System | Magnetic coupling drive |
| Vacuum Pump | Integrated oil-free vacuum pump |
| Ultimate Vacuum | 27 hPa (20 Torr) |
| Vacuum Range | 0–0.1 MPa (0–76 cmHg) |
| Heating Capability | Ambient to 55 °C (adjustable, with thermal cutoff) |
| Chamber Material | SUS-304 stainless steel |
| Lid Material | Transparent acrylic resin |
| Inlet Filter | 0.2 µm hydrophobic membrane |
| Exhaust Filter | Aerosol trap |
| Safety Interlock | Lid-open/stop motor interlock + 5 A fuse |
| Net Weight | 7.2 kg |
| Dimensions (W×D×H) | 200 × 205 × 230 mm |
| Power Input | AC 110–120 V, 50/60 Hz, 3 A |
| Brand | TOMY |
|---|---|
| Origin | Japan |
| Model | Suprema25 / Suprema23 / Suprema21 |
| Max Speed | 25,000 rpm / 23,000 rpm / 21,000 rpm |
| Max RCF | 60,110 × g / 51,420 × g / 46,850 × g |
| Max Capacity | 6 × 1000 mL / 4 × 1000 mL / — |
| Temperature Range | −9 to +35 °C |
| Acceleration/Deceleration | 10-step each |
| Drive System | Direct-drive induction motor |
| Refrigerant | HFC R404A |
| Power Supply | AC 220–240 V, 50/60 Hz, 30 A |
| Dimensions (W×D×H) | 715×794×1017 mm (Suprema25) / 570×794×1017 mm (Suprema23/21) |
| Net Weight | 265 kg / 265 kg / 215 kg |
| Safety | Rotor recognition, lid interlock, imbalance detection, overspeed protection, motor current & temperature monitoring |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | TOMY |
|---|---|
| Origin | Japan |
| Model(s) | SX300, SX500, SX700 |
| Sterilization Temp Range | 105–135°C (0.019–0.212 MPa) |
| Heating Temp Range | 45–104°C (0–0.015 MPa) |
| Holding Temp Range | 45–95°C |
| Max Working Pressure | 0.25–0.263 MPa |
| Chamber Capacity | 44 L / 58 L / 79 L (effective volume) |
| Chamber Material | SUS304 stainless steel |
| Temperature Sensor | Separated-type RTD probe positioned at chamber center |
| Pressure Sensor | Dual-balance diaphragm pressure transducer system |
| Water Level Detection | Conductivity-based automatic low-water sensor with auto-shutdown |
| Cooling System | Two-stage adjustable forced-air fan (reduces 121°C → 97°C in ≤12 min for 3 L load) |
| Safety Features | Dual interlocked lid mechanism, overpressure relief valve, thermal cut-off, ground-fault circuit interrupter, lid-temperature sensor, pressure safety valve |
| Power Supply | 230 VAC, 50 Hz |
| Input Power | 1.5 kW / 2.0 kW / 3.0 kW |
| Compliance | JIS B 8225, Japanese Pressure Vessel Safety Regulations (Type Approval certified), GLP/GMP-ready data traceability support |