Tongtailian (TTL)
Filter
Showing all 6 results
| Brand | Tongtailian (TTL) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Region of Origin | Domestic (PRC) |
| Model | TTL-100 |
| Chamber Volume | 18 L |
| Heating Power Supply | AC 220 V, 50 Hz |
| Operating Wash Temperature | 35 °C |
| Compatible Vial Outer Diameter | 11.05 ± 0.5 mm |
| Max. Vial Height | 32 ± 1 mm |
| Max. Batch Capacity | ≤97 vials per cycle |
| Ultrasonic Tank Volume | 10 L |
| External Dimensions (L×W×D) | 540 × 550 × 845 mm |
| Control Interface | LCD with Chinese-language UI |
| Water Source | Municipal tap water |
| Conductivity of Output Rinse Water | ≤0.067 µS/cm (equivalent to ≥15 MΩ·cm resistivity) |
| Safety Protections | Low-water-level cutoff, dry-run prevention, inlet pressure monitoring, automatic valve interlock, audible alarm, fault-code display |
| Brand | Tongtailian (TTL) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TTL-500E |
| Instrument Type | Knife Mill |
| Sample Suitability | Hard, Semi-hard, Elastic, Moist/Fatty/Oily Materials |
| Output Particle Size | ≤ 300 µm |
| Feed Particle Size | 10–40 mm |
| Batch Processing Capacity | 500 g (for fruits/vegetables) |
| Motor Power | 2.2 kW |
| Max. Rotational Speed | 18,000 rpm |
| Grinding Principle | High-shear Cutting |
| Grinding Modes | Dry & Wet |
| Predefined Programs | 8 standard + 64 editable custom protocols |
| Rotor Types | Stainless Steel & Titanium Alloy |
| Rotor Configuration | Dual-blade, single-layer |
| Grinding Vessel Options | 1 L / 2.2 L / 3.2 L (stainless steel or PP) |
| Control Interface | 7-inch color touchscreen |
| Operating System | Embedded Linux |
| Cleaning System | Dedicated wash chamber with detergent auto-dosing, three-stage cleaning (tap water rinse, high-power ultrasonic, hot-air drying) |
| Safety Features | Dual interlock system, emergency stop, rotor misalignment detection, low-water-pressure and dry-run protection, motor overcurrent/overvoltage/overheat/overload protection |
| Brand | Tongtailian (TTL) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | TTL-500S |
| Instrument Type | Knife Mill |
| Sample Applicability | Soft to moderately hard, elastic, high-moisture/fat/oil content samples |
| Output Particle Size | ≤ 300 µm |
| Feed Particle Size | ≤ 40 mm |
| Batch Processing Capacity | 1.2–2.0 kg |
| Motor Power | 2.2 kW |
| Max. Rotational Speed | 18,000 rpm |
| Grinding Principle | High-shear cutting |
| Grinding Modes | Dry & Wet |
| Programmable Grinding Time | User-defined |
| Preloaded Programs | 8 standard protocols |
| Customizable Protocols | 64 editable methods |
| Rotor Material Options | Stainless steel, titanium alloy |
| Rotor Configuration | Dual-blade, single-layer |
| Grinding Vessel Capacities | 1 L / 2.2 L / 3.2 L (stainless steel or PP) |
| Control Interface | 7-inch color touchscreen |
| Operating System | Embedded Linux |
| Cleaning System | Dedicated wash basin with detergent dispensing, 3-stage cleaning (tap water rinse, high-power ultrasonic cleaning, hot-air drying) |
| Safety Features | Dual interlock system, emergency stop, rotor misalignment detection, low-water-pressure cutoff, motor overcurrent/overvoltage/overheat/overload protection |
| Brand | Tongtailian (TTL) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | TTL-580 |
| Instrument Type | Knife Mill |
| Sample Suitability | Hard, Semi-hard, Elastic, Moist, Oily, or Fatty Materials |
| Output Particle Size | ≤ 300 µm (typical, sample-dependent) |
| Feed Particle Size | 10–40 mm |
| Batch Processing Capacity | 500 g (for fruits/vegetables), 300 g (for meat/fish) |
| Grinding Principle | High-shear mechanical comminution via rotating blades |
| Motor Power | 2.2 kW |
| Motor Speed | 18,000 rpm |
| Grinding Vessel Volume | 2.2 L (stainless steel or PP) |
| Blade Configuration | Dual-layer, 4-blade assembly (stainless steel or titanium alloy) |
| Control Interface | 7-inch color touchscreen |
| Operating System | Embedded Linux |
| Cleaning System | Dedicated external cleaning chamber with peristaltic detergent dosing, three-stage cleaning (tap water → high-power ultrasonic → hot-air drying) |
| Safety Features | Dual interlock system, emergency stop, blade misalignment detection, low-water-pressure cutoff, motor overcurrent/overvoltage/overheat/overload protection |
| Dimensions | 950 W × 450 D × 815 H mm |
| Brand | Tongtailian (TTL) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TTL-6SS |
| Instrument Type | Laboratory Benchtop System |
| Price Range | USD 2,800 – 7,000 (FOB China) |
| Brand | Tongtailian (TTL) |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | TTL-DCI |
| Price Range | USD 1,400 – 4,200 |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 99.9 °C |
| Temperature Stability | ±1 °C |
| Sample Tube Diameter Compatibility | 10–29 mm |
| Gas Flow Rate | 0–10 L/min |
| Sample Positions | 12 |
| Heating Power | 600 W |
| Display | Digital LED |
| Temperature Accuracy | ±2 °C |
| Nitrogen Consumption per Position | 330 mL/min |
| Material Construction | Stainless Steel Frame with PTFE-Coated Components |
| Gas Control | Individual Needle Valve per Channel + Master Flow Meter with Digital Readout |
| Sample Holder | Motorized Vertical Lift |
| Sample Holder Rotation | 360° Adjustable Orientation |