X-rayVision
Filter
Showing all 4 results
| Brand | X-rayVision |
|---|---|
| Model | SpotCam-E |
| Sensor Type | Back-illuminated scientific CMOS (sCMOS) |
| Detection Range | EUV to soft/hard X-rays (0.05–20 keV) |
| Readout Architecture | Custom low-noise charge-integration + single-photon counting mode (pixel-level event extraction) |
| Operating Environment | External vacuum or fully internal vacuum configurations available |
| Frame Rate | Up to 100 fps at full resolution (depending on region-of-interest and binning) |
| Energy Resolution | FWHM < 200 eV at 5.894 keV (⁵⁵Fe source, 20 °C, no cooling) |
| Pixel Pitch | 6.5 µm |
| Active Area | 12.8 mm × 12.8 mm (2048 × 2048) |
| Interface | Camera Link HS or CoaXPress 2.0 |
| Compliance | RoHS, CE, ISO 9001-manufactured design |
| Software Support | SDK for C/C++, Python, MATLAB |
| Brand | X-rayVision |
|---|---|
| Model | SpotCam-M |
| Type | Lens-Coupled sCMOS X-ray Detection Camera |
| Detector Technology | Scintillator–sCMOS Optical Coupling |
| Spatial Resolution (Measured) | 0.6 µm (with MH20 lens) |
| Voltage Range Compatibility | 20–70 kV |
| Pixel Array | ≥6200 × 4100 |
| Read Noise | 2 e⁻ (typ.) |
| Dark Current | 0.001 e⁻/pixel/sec @ −17°C (typ.) |
| Cooling | Water-cooled, down to −23°C (@ 20°C ambient) |
| A/D Conversion | 16-bit |
| Exposure Time | 1 ms – 1000 s |
| Interface | USB 3.0 |
| Dimensions | 470 mm × 226 mm × 120 mm |
| Weight | 11.5 kg |
| Lens Options | Manual or Motorized Turret (customizable) |
| Field of View (FoV) | 1.17 mm × 0.78 mm (MH20), 2.34 mm × 1.56 mm (MM10), 5.85 mm × 3.9 mm (ML04) |
| Effective Pixel Size | 0.19 µm / 0.38 µm / 0.95 µm (lens-dependent) |
| Binning Modes | 1×1, 2×2, 3×3, 4×4 |
| Brand | X-rayVision |
|---|---|
| Model | SpotCooler |
| Type | Integrated Circulating Chiller |
| Cooling Method | Air-Cooled Thermoelectric (Peltier) |
| Temperature Range | 10–60 °C |
| Temperature Stability | ±0.1 °C |
| Cooling Capacity | 100 W |
| Heating Capacity | 100 W |
| Pump Flow Rate | 0.5–1 L/min |
| Reservoir Volume | 147 mL |
| Power Supply | DC 24 V ±10%, 12.5 A (peak 14 A) |
| Dimensions | 251 × 157 × 213 mm |
| Weight | 5 kg |
| Noise Level | 30–48 dB(A) |
| Compatible Fluids | Deionized water, distilled water, ≤20% ethylene glycol aqueous solution |
| Wetted Materials | Stainless steel, EPDM, NBR, PPS |
| Communication Interface | Optional RS232 / RS485 |
| Operating Environment | 10–35 °C, 35–70% RH (non-condensing) |
| Continuous Operation | Yes |
| Brand | X-rayVision |
|---|---|
| Model | SpotLight-P |
| Type | Polycapillary-Focused Microfocus X-ray Source |
| Target Materials | Cu, Mo, Rh, Ag, W (customizable) |
| Max. Tube Voltage | ≤50 kV |
| Max. Tube Current | ≤1 mA |
| Cooling | Air + Water |
| Dimensions (w/ capillary adjuster) | 261 × 186 × 110 mm |
| Weight | 10 kg |
| Focal Spot Size (Mo-Kα, FWHM) | down to 8 µm |
| Beam Divergence (collimated) | ≤0.2° |
| Output Flux (Mo-Kα) | up to >8.1×10⁷ ph/s |
| Output Flux (Cu-Kα) | up to >8.5×10⁹ ph/s |
| Compliance | CE-marked for industrial & laboratory use |
| Software Interface | RS-232 / USB / Ethernet (SCPI-compatible) |