YAMATO
Filter
Showing all 16 results
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | DKN313C |
| Instrument Type | Benchtop |
| Temperature Range | Ambient +10°C to 260°C |
| Temperature Uniformity | ±1.0°C (at setpoint) |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ~60 min (from ambient to 210°C) |
| Chamber Volume | 27 L |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | DL410 |
| Maximum Water Evaporation Rate | 3000 mL/h |
| Atomization Method | Two-Fluid Nozzle (Orifice Diameter: 0.7 mm) |
| Drying Configuration | Co-Current Downward Spray |
| Inlet Air Temperature Range | 0–300 °C |
| Outlet Air Temperature Monitoring | K-Type Thermocouple |
| Drying Chamber Dimensions | Ø457 mm × H975 mm (Borosilicate Glass) |
| Chamber & Cyclone Material | Ultra-Hard Borosilicate Glass |
| Feed Pump | Precision Peristaltic Type, 0–70 mL/min Adjustable |
| Hot Air Flow Control | DC Brushless Blower, 0.3–1.0 m³/min |
| Heating System | Dual Stainless Steel Heaters, 2.0 kW × 2 |
| Nozzle Maintenance | Automated Pulse Cleaning (Probe Tapping + Purge Air) |
| Safety Features | Independent Over-Temperature Cut-Off, Leakage Current Protection, Feed Pump Reverse Rotation Detection, Electrostatic Discharge Brush, Integrated Safety Enclosure |
| Power Supply | AC 220 V, 50/60 Hz, 24 A |
| Dimensions (W×D×H) | 1060 × 880 × 1770 mm |
| Weight | ~180 kg |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | GB210-A |
| Input Voltage Range | AC 200–240 V (50/60 Hz) |
| Inlet Air Temperature Range | 40–220 °C (±1 °C PID control) |
| Outlet Air Temperature Range | 0–60 °C |
| Drying Air Flow | 0–0.7 m³/min |
| Atomizing Air Pressure | 0–0.6 MPa |
| Feed Pump Flow Rate | 0–26 mL/min |
| Power Consumption | 2.0–2.88 kW |
| Dimensions (W×D×H) | 760 × 420 × 1350 mm |
| Weight | 110 kg |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | IC612C |
| Temperature Range | Ambient +5°C to 80°C |
| Temperature Uniformity | ±1.0°C |
| Capacity | 159 L |
| Humidity Control | Not equipped |
| Configuration | Air-jacketed, Dual-door, Reinforced Glass Inner Door |
| Safety Features | Self-diagnostic Circuit (temperature sensor failure, heater open-circuit, SSR short-circuit, over-temperature prevention), Independent Over-Temperature Protector, Earth Leakage Circuit Breaker, Keypad Lock |
| Control Modes | Setpoint Operation, Auto Start/Stop, Rapid Stop, Offset Calibration |
| Brand | Yamato |
|---|---|
| Origin | Japan |
| Model | ICF410C |
| Temperature Range | Ambient +5°C to 80°C |
| Temperature Uniformity | ±1.0°C at 37°C |
| Chamber Volume | 89 L |
| Temperature Stability | ±0.1°C at 37°C (JIS/GB compliant) |
| Construction | Interior – SUS304 Stainless Steel |
| Heating System | Ni-Cr Wire Heater (360 W), Air Jacket with Adjustable Fan Speed (including off mode) |
| Safety Features | Dual Over-Temperature Protection (PID-based auto cut-off + independent mechanical over-heat preventer), Leakage Current Circuit Breaker, Self-Diagnostic Circuit (sensor fault, heater open, SSR short), Keypad Lock |
| Controller | PID Digital Microprocessor with Dual 4-Digit LED Display (Green for Actual Temp, Red for Setpoint), Programmable Timer (1 min–999 h 50 min), Deviation Correction Function, Power Failure Recovery |
| Dimensions (W×D×H mm) | 560×606×820 (External) |
| Net Weight | ~45 kg |
| Power Supply | AC 220 V, 50/60 Hz, 2 A |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | RE301 |
| Capacity | 1 L |
| Rotation Speed | 20–250 rpm |
| Lift Stroke | 130 mm |
| Power Supply | AC 100–240 V, 50/60 Hz |
| Dimensions (with Glass Assembly A) | 828 × 400 × 586 mm (H716 mm with lift raised) |
| Weight | 14.4 kg (main unit only, excluding glassware and bath) |
| Motor Type | Brushless DC (rotation), DC (lift) |
| Control | Potentiometer-based digital speed setting and display |
| Safety Features | Mechanical lower limit stop, motor overload protection |
| Lift Function | Motorized lift with power-failure auto-retract |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | RE601 |
| Capacity | 1 L |
| Rotation Speed | 20–250 rpm |
| Vertical Travel | 130 mm |
| Vacuum Set Range | 0–981 hPa |
| Vacuum Measurement Range | 0–1033 hPa |
| Vacuum Resolution | 1 hPa |
| Hysteresis Setting | 1–50 hPa |
| Vapor Temperature Display Resolution | 0.1 °C or 1 °C (selectable) |
| Power Supply | AC 100–240 V, 50/60 Hz, 1.5 A (unit only) |
| Dimensions (w/d/h) | 828 × 400 × 727 mm (with Glass Assembly A) |
| Weight | ~15 kg (excluding glassware and bath) |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | RE801 |
| Capacity | 1 L |
| Rotation Speed | 20–250 rpm |
| Vertical Travel | 130 mm |
| Vacuum Set Range | 0–981 hPa |
| Vacuum Measurement Range | 0–1033 hPa |
| Vacuum Resolution | 1 hPa |
| Hysteresis Setting | 1–50 hPa |
| Vapor Temperature Display Resolution | 0.1 °C or 1 °C (selectable) |
| Power Supply | AC 100–240 V, 50/60 Hz, 1.5 A (unit only) |
| Dimensions (with Glass Assembly A) | 828 × 400 × 727 mm (H: 857 mm with lift raised) |
| Weight | ~15 kg (excluding glassware and bath) |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SA300 |
| Oscillation Mode | Horizontal/Vertical Reciprocal |
| Speed Range | 20–300 rpm (both modes) |
| Timer | 0–60 min (5-min increments) |
| Motor | 90 W DC Brush Motor |
| Dimensions (W×D×H) | 425 × 460 × 425 mm |
| Weight | ~40 kg |
| Power Supply | AC 100 V, 2.2 A |
| Max Load Capacity | 3 × 1000 mL or 2 × 2000 mL Separatory Funnel Racks |
| Control | Analog Speed Knob + Mechanical Timer Dial + Continuous Operation Toggle Switch |
| Accessories | 1 Fuse, 1 Set of Carbon Brushes |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SI411C |
| Heating Method | Natural Convection |
| Temperature Range | Ambient +5°C to 260°C |
| Temperature Control Accuracy | ±2°C (at 260°C) |
| Temperature Uniformity | ±20°C (at 260°C) |
| Heating Power | 1.2 kW |
| Internal Dimensions (W×D×H) | 450 × 430 × 400 mm |
| Chamber Volume | 77 L |
| Shelf Load Capacity | 15 kg per shelf |
| Number of Adjustable Shelves | 10 |
| Shelf Spacing | 30 mm |
| Power Supply | AC 220 V, 6 A, 50/60 Hz |
| Net Weight | ~42 kg |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SI611C |
| Convection Type | Natural Convection |
| Temperature Range | Ambient +5°C to 260°C |
| Temperature Control Accuracy | ±2°C (at 260°C) |
| Internal Dimensions (W×D×H) | 600 × 530 × 500 mm |
| Chamber Volume | 159 L |
| Shelf Load Capacity | 15 kg per shelf |
| Number of Shelves | 13 (adjustable at 30 mm intervals) |
| Power Supply | AC 220 V, 6.5 A, 50/60 Hz |
| Heating Power | 1.36 kW |
| Safety Features | Dual independent over-temperature protection (PID controller + mechanical overheat limiter), self-diagnostic circuitry (sensor fault, heater open-circuit, SSR short-circuit), earth leakage circuit breaker, key lock function |
| Controller | 4-digit LED display (green for actual temperature, red for setpoint), 3-segment PID control, programmable timer (1 min–99 h 59 min |
| extended mode | 100–999 h 50 min with standby), 30-step program memory (configurable as 30×1, 15×2, or 10×3 segments) |
| Compliance | Designed and manufactured in accordance with JIS B 8701 (Japanese Industrial Standard for Dry Heat Sterilizers), compatible with ISO 17665-1 and ASTM F1055 requirements for thermal validation of dry heat sterilization processes |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SL-21 |
| Operating Temperature Range | 800–850 °C |
| Temperature Attainment Time | ≤10 min |
| Heating Power | 130 W |
| Internal Chamber Dimensions (W×D×H) | 95 × 170 × 200 mm |
| Aperture Diameter | 15 mm |
| Power Supply | AC 100 V, 1.5 A |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SN310C |
| Type | Vertical Sterilizer |
| Max Temperature | 135 °C |
| Max Pressure | 0.255 MPa |
| Operating Temperature Range | 45–135 °C (with programmable sub-ranges: 45–80 °C preheat, 45–60 °C keep-warm, 65–100 °C dissolution, 105–135 °C sterilization) |
| Heating Power | 2 × 800 W (100 V) |
| Cooling | Integrated axial-flow fan |
| Safety | Triple mechanical pressure-lid interlock system |
| Voltage Options | AC 100–120 V or AC 200–240 V |
| Ambient Operating Temperature | 5–35 °C |
| Control System | Microprocessor-based PID temperature control with digital keypad interface and real-time display |
| Interface Ports | 1/4″ sample sensor port, 1/4″ chart recorder port, pressure gauge port with solenoid valve branch |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SQ510C |
| Instrument Type | Vertical Sterilizer |
| Max Temperature | 135 °C |
| Max Pressure | 0.255 MPa |
| Chamber Dimensions | Ø370 × 465 mm (H) |
| External Dimensions | 520 × 660 × 901 mm (W × D × H) |
| Chamber Volume | 50 L |
| Heating Power | 2 × 1000 W |
| Cooling | Integrated Axial Fan |
| Operating Ambient Temperature | 5–35 °C |
| Power Supply Options | AC 100–120 V (20.5–24.5 A) or AC 200–240 V (10.5–12.5 A) |
| Safety | Triple Interlocked Lid Lock System |
| Control | Microprocessor-based PID with Digital Keypad Interface |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | SQ810C |
| Instrument Type | Vertical |
| Max Temperature | 135 °C |
| Max Pressure | 0.255 MPa |
| Chamber Dimensions | Ø370 × 744 mm |
| External Dimensions | 520 × 660 × 1125 mm |
| Chamber Volume | 80 L |
| Heating Power | 4000 W |
| Operating Ambient Temperature | 5–35 °C |
| Standard Cooling Fan | Yes |
| Safety Locks | Triple Interlocked Lid Mechanism |
| Voltage Options | AC 100–120 V (20.5–24.5 A) / AC 200–240 V (10.5–12.5 A) |
| Temperature Control | Microprocessor-based PID with Digital Keypad Interface |
| Programmable Stages | Preheating (45–80 °C), Holding (45–60 °C), Dissolution (65–100 °C), Sterilization (105–135 °C) |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | TE100 |
| Compliance | ISO 4825-1:2023-01 |
| Sample Size | 30 × 30 mm |
| Load Force | 10 kg |
| Temperature Resolution | ≥0.01 °C |
| Electrical Resistance Measurement Error | ±0.1 mΩ (70–130 Ω) |
| Sampling Rate | up to 100 samples/sec |
| Power Supply | AC 100 V, 50/60 Hz |
| Controller Dimensions | W380 × D470 × H180 mm |
| Measurement Unit Dimensions | W380 × D400 × H320 mm |
| TEG Chip Dimensions | W5 × D5 × H0.35 mm |
| TEG Heat Generation Density | 1 kW/cm² |
| Max Input Power | ~250 W |
| Thermal Ramp Rate | 1.4 × 10⁴ K/sec |
| External Circulator Model | NeoCool CFA302 |
| Circulation Type | External Closed-Loop System |
| Cooling Method | Air-Cooled |
| Temperature Control Range | −10 to +60 °C |
| Circulator Power Supply | AC 100 V, 13.8 A |
| Circulator Dimensions | W380 × D565 × H725 mm |