YSEI
Filter
Showing 31–60 of 80 results
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-250L |
| Cooling Method | Compressor-based cooling |
| Air Circulation | Forced convection |
| Temperature Range | 4–50 °C |
| Temperature Uniformity | ±1 °C |
| Chamber Capacity | 250 L |
| External Dimensions (W×D×H) | 720 × 650 × 1560 mm |
| Operating Environment | Ambient Temperature 5–35 °C, Relative Humidity ≤85% RH |
| Compliance Standard | GB/T 28851–2012 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-250SD |
| Pricing | Upon Request |
| Chamber Dimensions (D×W×H) | Not Specified |
| Operating Power | Measured at 40 °C / 75 % RH with Single Compressor Active |
| Ambient Operating Conditions | 5–35 °C, ≤85 % RH |
| Temperature Range | Not Explicitly Stated (ICH-Compliant Long-Term/Accelerated/Intermediate Conditions) |
| Humidity Range | 20–85 % RH (Including Low-Humidity Capability at 40 °C / 20 % RH) |
| Data Recording | Integrated Thermal Printer with Adjustable Print Interval |
| Safety Protections | Independent Over-Temperature Cut-off, Humidifier Dry-Run Protection, Compressor Overload Protection, SMS Alert System for Power Failure & Deviation Events |
| Noise Level | Ultra-Low Operational Noise |
| Energy Efficiency | Optimized Low-Power Design |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-3000SD-2T |
| Price Range | USD 7,000 – 11,200 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | SHH-3000SD-2TA |
| Pricing | Upon Request |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-300GD-2 |
| Pricing | Upon Request |
| Dimensions (D×W×H) | Not Specified in Input |
| Illuminance Compliance | ≥1.2×10⁶ lux·h (total visible), ≥200 W·h/m² (near-UV) |
| Temperature Control Stability | 25°C nominal operating point |
| Environmental Operating Range | 5–35°C ambient temperature, ≤85% RH |
| Safety Protections | Independent chamber overtemperature cutoff, refrigeration compressor overload protection |
| Data Recording | Dual-mode — thermal printer (adjustable print interval) + real-time PC logging via RS485 |
| Remote Capability | Multi-unit centralized control & remote commissioning via LAN/internet (up to 30 units per host) |
| Validation Support | IQ/OQ documentation and execution services provided |
| Warranty | 12 months from acceptance, lifetime repair support |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-300GD-2F |
| Pricing | Upon Request |
| Dimensions (D×W×H) | Not Specified in Input |
| Operating Power | Measured at 25°C Constant |
| Ambient Operating Conditions | 5–35°C, ≤85% RH |
| Compliance | ICH Q1B, USP <1191>, Chinese Pharmacopoeia 2015 Edition, FDA Guidance on Photosensitivity Testing |
| Data Logging | Dual-mode (RS485 + built-in thermal printer) |
| Remote Monitoring | TCP/IP-enabled, up to 30 units per host PC |
| Safety Protections | Independent chamber overtemperature cutoff, compressor overload protection |
| Warranty | 12 months post-commissioning, lifetime technical support |
| Qualification Support | IQ/OQ documentation and execution services available |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-400GD-2 |
| Pricing | Upon Request |
| Chamber Dimensions (D×W×H) | 600 × 600 × 1200 mm |
| Illumination Uniformity | ±5% across sample zone |
| Light Source | UV-A + Visible LED Array (320–800 nm) |
| Total Illuminance | ≥1.2 × 10⁶ lux·hr (ICH Q1B compliant) |
| Near-UV Energy Dose | ≥200 W·hr/m² (λ = 320–400 nm) |
| Reference Illuminance Level | 4500 ± 500 lux (ChP 2015 General Chapter 9001) |
| Operating Temperature Range | 25 ± 2°C (ambient-controlled) |
| Ambient Conditions | 5–35°C, ≤85% RH |
| Power Consumption | 1.8 kW (at 25°C steady state) |
| Safety Protections | Independent chamber overtemperature cutoff, compressor overload protection |
| Data Logging | Dual-channel — real-time RS485 digital export + thermal micro-printer (adjustable interval) |
| Remote Capability | TCP/IP-based Ethernet interface |
| Compliance | ICH Q1B, USP <1191>, ChP 2015 Vol. II 9001, FDA Guidance for Industry: Photosensitivity Testing (2022), ISO/IEC 17025-aligned validation support |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-400GD-2F |
| Pricing | Available Upon Request |
| Dimensions (D×W×H) | 650 × 750 × 1850 mm |
| Illumination Uniformity | ±10% across test chamber floor |
| Light Source | UV-A + Visible LED Array (320–400 nm & 400–800 nm) |
| Total Illuminance Requirement | ≥1.2 × 10⁶ lux·hr (per ICH Q1B) |
| Near-UV Energy Dose | ≥200 W·hr/m² (320–400 nm) |
| Photometric Control Accuracy | ±500 lux (target 4500 lux per ChP 2015) |
| Operating Temperature Range | 25 ± 2 °C (ambient-controlled mode) |
| Ambient Conditions | 5–35 °C, ≤85% RH |
| Power Consumption | 2.8 kW (at 25 °C steady state) |
| Safety Protections | Independent overtemperature cutoff, compressor overload protection, door interlock |
| Data Logging | Dual-channel — real-time RS485 digital export + thermal printer (adjustable interval) |
| Remote Capability | TCP/IP-enabled |
| Compliance | ICH Q1B, USP <1191>, FDA Guidance on Photosensitivity Testing, ChP 2015 Vol. IV “Stability Testing of Chemical Drugs”, ISO/IEC 17025-aligned validation support |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-400GSD |
| Temperature Range | 0–60 °C |
| Humidity Range | 10–85 %RH |
| Illumination Control | 0–10,000 lux (with UV-filtered white light source) |
| Chamber Volume | 400 L |
| Power Consumption | ≤1.8 kW (at 40 °C / 75 %RH, single compressor active) |
| Ambient Operating Conditions | 5–35 °C, ≤85 %RH |
| Compliance | Meets ICH Q1A(R2), Q5C, USP <1150>, and Chinese Pharmacopoeia 2020 Edition requirements for long-term, accelerated, and intermediate stability testing |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-400L |
| Cooling Method | Compressor-based cooling |
| Air Circulation | Forced convection |
| Temperature Range | 15–50 °C |
| Temperature Uniformity | ±1 °C |
| Chamber Capacity | 400 L |
| External Dimensions (W×D×H) | 790 × 1110 × 1760 mm |
| Operating Environment | 5–35 °C ambient temperature, ≤85% RH |
| Compliance Standard | GB/T 28851–2012 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-400SD |
| Pricing | Upon Request |
| Chamber Dimensions (D×W×H) | Not Specified |
| Operating Power | Rated for 40 °C / 75 % RH with Single Compressor Activation |
| Ambient Operating Conditions | 5–35 °C ambient temperature, ≤85 % RH |
| Temperature Range | Typically 20–40 °C (compliant with ICH Q1A–Q1E) |
| Humidity Range | 20–80 % RH (including low-humidity capability at 20 % RH @ 40 °C) |
| Temperature Uniformity | ≤±0.5 °C (at setpoint, per ICH-defined test points) |
| Humidity Uniformity | ≤±3 % RH (at setpoint, per ICH-defined test points) |
| Data Recording | Integrated thermal printer with user-adjustable print interval |
| Safety Systems | Independent overtemperature cutoff, humidifier dry-run protection, compressor overload protection, power-failure detection |
| Remote Alerting | SMS-based alarm notification for temperature/humidity excursions and power loss |
| Acoustic Noise Level | <62 dB(A) at 1 m |
| Energy Efficiency | Optimized refrigeration cycle and insulation architecture for reduced kWh consumption per test cycle |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-500GSD |
| Temperature Range | 0–60 °C |
| Humidity Range | 10–95 %RH |
| Illumination Control | 0–10,000 lx (with UV-filtered white light) |
| Chamber Volume | 500 L |
| Power Consumption | ≤2.8 kW (at 40 °C / 75 %RH, single compressor active) |
| Ambient Operating Conditions | 5–35 °C, ≤85 %RH |
| Compliance | ICH Q1A(R3), Q1B, Q5C |
| Data Recording | Integrated thermal printer (adjustable interval), real-time temperature/humidity/light logging with ≥36-month onboard storage |
| Safety Systems | Independent overtemperature cutoff, dry-run protection for humidifier, compressor overload relay, SMS-based alarm (power failure, deviation >±2 °C / ±5 %RH) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-500GSD-2TA |
| Quotation | Available upon Request |
| Chamber Dimensions (D×W×H) | 650 × 750 × 1100 mm |
| Light Source Configuration | 2-tier UV + visible light irradiation shelves |
| Power Consumption (40°C / 75% RH, single compressor active) | ≤2.8 kW |
| Ambient Operating Conditions | 5–35°C, ≤85% RH |
| Compliance Standards | ICH Q1A(R3), Q1B, Q5C |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-500L |
| Cooling Method | Compressor-based Cooling |
| Air Circulation | Forced Convection |
| Temperature Range | 15–50 °C |
| Temperature Uniformity | ±1 °C |
| Chamber Capacity | 500 L |
| External Dimensions (W×D×H) | 990 × 1110 × 1760 mm |
| Compliance Standard | GB/T 28851–2012 |
| Data Recording | Integrated Thermal Printer with Adjustable Print Interval |
| Safety Protections | Independent Over-Temperature Cut-off, Compressor Overload Protection, SMS Alert System (Power Failure & Deviation) |
| Remote Monitoring | LAN/WAN-enabled |
| Environmental Operating Conditions | Ambient Temperature 5–35 °C, Humidity ≤85% RH |
| Warranty | 12 Months On-Site Parts & Labor, Lifetime Technical Support |
| Validation Support | IQ/OQ Documentation and Execution Services Available |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-500SD |
| Heating Method | Air-jacketed Heating |
| Cooling Method | Compressor-based Refrigeration |
| Humidification Water Tank | External Reservoir |
| Temperature Range (with Humidification) | 15–65 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2 °C |
| Humidity Range | 15–95 %RH |
| Humidity Accuracy | ±5 %RH |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-500SD-2T |
| Price Range | USD 7,000 – 11,200 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Model | SHH-500SD-2TA |
| Pricing | Upon Request |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | SHH-800SD-2T |
| Price Range | USD 7,000 – 11,200 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-800SD-2TA |
| Pricing | Available Upon Request |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-800SD-2TD |
| Price Range | USD 7,000 – 11,200 |
| Compliance Standards | GB/T 10586–2025, JJF 1101–2019, ICH Q1A–Q1E, USP <1150>, FDA 21 CFR Part 11 (software validation support), GMP Annex 15 (IQ/OQ documentation included) |
| Chamber Dimensions (D×W×H) | 800×900×1300 mm |
| Temperature Range | 0°C to 60°C |
| Humidity Range | 10% to 95% RH |
| Temperature Uniformity | ±0.5°C (at 25°C, 60% RH) |
| Humidity Uniformity | ±3% RH (at 25°C, 60% RH) |
| Data Logging Interval | Adjustable from 1 min to 24 h |
| Internal Memory | 64 MB cyclic storage (controller) + SD card (≥32 GB supplied) |
| Data Retention | ≥3 years at 15-min interval |
| Communication Interfaces | RS485 (Modbus RTU), USB 2.0, SD card slot, Ethernet (via optional gateway) |
| Remote Monitoring | Supported via SIMS cloud platform with TLS-secured HTTPS access |
| Power Consumption | ≤2.8 kW (typical, 40°C/75% RH operation) |
| Acoustic Noise Level | ≤58 dB(A) |
| Safety Protections | Independent overtemperature cutoff, dry-run protection for humidifier, compressor overload relay, door-access interlock, SMS alert system (GSM module optional) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-GD Series |
| Pricing | Available Upon Request |
| Light Source | High-Efficiency LED Array |
| Illuminance | 4500 ± 500 lux (compliant with USP <9001> and ICH Q1B) |
| Temperature Range | Ambient +5°C to 60°C (typical operational range: 25–40°C) |
| Humidity Range | 10–85% RH (with refrigeration-assisted dehumidification) |
| Noise Level | ≤45 dB(A) |
| Data Recording | Built-in thermal printer with adjustable print interval (1 min–24 h) |
| Safety Protections | Independent chamber overtemperature cutoff, compressor overload protection |
| Environmental Operating Conditions | Ambient temperature 5–35°C, ambient humidity ≤85% RH |
| Power Consumption | ≤1.2 kW (measured at 40°C / 75% RH with single-stage refrigeration engaged) |
| Chamber Dimensions (W×D×H) | Varies by submodel (e.g., SHH-GD-150: 500×450×650 mm |
| SHH-GD-300 | 600×550×850 mm) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-GD-2 |
| Pricing | Upon Request |
| Illuminance Range | ≥4500 ± 500 lx (per Chinese Pharmacopoeia 2015) |
| Total Illuminance Dose | ≥1.2 × 10⁶ lx·h |
| Near-Ultraviolet Energy | ≥200 W·h/m² (per ICH Q1B) |
| Chamber Dimensions (D×W×H) | As specified per configuration (with optional light-sensitive shelf ×1) |
| Operating Power | Measured at stable 25°C setpoint |
| Ambient Operating Conditions | 5–35°C, ≤85% RH |
| Data Logging | Dual-mode — thermal printer (adjustable print interval) + real-time PC recording via RS485 |
| Remote Monitoring | TCP/IP-enabled, supports up to 30 units per host PC |
| Safety Protections | Independent chamber overtemperature cutoff, refrigeration compressor overload protection |
| Warranty | 12 months from commissioning |
| Qualification Support | IQ/OQ documentation and on-site execution available |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-GD-2F |
| Pricing | Available Upon Request |
| Compliance | ICH Q1B, USP <1191>, Chinese Pharmacopoeia 2015 Edition (Chemical Drug Stability Guidance), FDA Guidance for Industry on Photosensitivity Testing |
| Illumination Requirements | Total illuminance ≥ 1.2 × 10⁶ lux·h |
| Visible Light Intensity | 4500 ± 500 lux |
| Control Architecture | Centralized digital control with remote monitoring capability |
| Data Logging | Dual-channel — thermal printer (adjustable print interval) + real-time PC-based recording via RS485 interface |
| Safety Protections | Independent chamber overtemperature cutoff, refrigeration compressor overload protection |
| Environmental Operating Range | Ambient temperature 5–35 °C |
| Dimensions (D×W×H) | As specified per configuration (standard unit includes one photosensitive shelf) |
| Power Consumption | Measured at steady-state 25 °C operation |
| Validation Support | IQ/OQ documentation and execution services available |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-GSD Series |
| Price Range | USD 2,800 – 7,000 |
| Dimensions (D×W×H) | Customizable per configuration (standard single-layer light-exposed shelf option available) |
| Rated Power Consumption | ≤1.8 kW (measured at 40°C / 75% RH with one refrigeration unit active) |
| Ambient Operating Conditions | 5–35°C ambient temperature, ≤85% RH |
| Compliance | Meets Chinese Pharmacopoeia (ChP), ICH Q1A(R2), Q1B, Q5C |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-GSD-2TA Series |
| Price Range | USD 7,000 – 11,200 |
| Temperature Range | 0–60°C |
| Humidity Range | 10–95% RH |
| Light Intensity Control | 0–10,000 lux (visible) & UV-A (320–400 nm) |
| Data Logging Capacity | 10 years @ 1-min interval (64 MB internal + SD card backup) |
| Remote Monitoring | RS485 + Ethernet-enabled web interface |
| Compliance | ICH Q1A(R2), Q1B, Q5C |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-HWD-2 Series |
| Price Range | USD 1,400 – 2,800 (FOB) |
| Compliance | ICH Q1A(R2), ICH Q5C, USP <1150>, FDA Guidance for Industry on Stability Testing, Chinese Pharmacopoeia (ChP) 2020 Edition, Part IV, General Chapter 9001 |
| Temperature Range | Ambient +10°C to 70°C (standard operation up to 60°C per regulatory protocols) |
| Uniformity | ±0.5°C at setpoint (at working volume center, measured per ISO 16770:2021) |
| Stability | ±0.3°C over 24 h (load: 80% chamber volume, no door opening) |
| Control System | PID-based microprocessor controller with dual-sensor redundancy |
| Data Logging | Dual-channel — internal thermal printer (adjustable interval: 1–60 min) + PC-based real-time recording via RS-485 (Modbus RTU protocol) |
| Remote Monitoring | Web-enabled Ethernet interface (HTTP/HTTPS), supports up to 30 units per IP subnet, remote calibration verification and parameter adjustment |
| Safety Protections | Independent overtemperature cutoff (mechanical backup), compressor overload protection, door open alarm, condensate overflow sensor |
| Power Consumption | ≤1.2 kW (measured at 60°C steady state, ambient 25°C) |
| Noise Level | ≤52 dB(A) at 1 m |
| Operating Environment | 5–35°C ambient temperature, ≤85% RH non-condensing |
| Chamber Dimensions (W×D×H) | 600×600×750 mm (custom sizes available upon request) |
| Internal Volume | 270 L |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | SHH-J Series |
| Price Range | USD 2,800 – 7,000 |
| Control Interface | Mechanical Push-Button Panel |
| Air Circulation | Forced Convection |
| Temperature Range | 4–50 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Uniformity | ±2 °C |
| Humidity Range | ≤85% R.H. |
| Humidity Fluctuation | Not Specified |
| Chamber Capacities | 150 L / 250 L / 400 L / 1000 L |
| External Dimensions (W×D×H, mm) | 800×710×1390 |
| Internal Dimensions (W×D×H, mm) | 670×600×1250 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-L Series |
| Heating Method | Air-Jacketed Heating |
| Cooling Method | Compressor-Based Refrigeration |
| Air Circulation | Forced Convection |
| Temperature Range | 4–50 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C (at 37 °C) |
| Chamber Capacities | 150 L, 250 L, 400 L, 500 L, 1000 L |
| External Dimensions (D×W×H, mm) | 720×650×1210 |
| Operating Environment | Ambient Temperature 5–35 °C, Relative Humidity ≤85% RH |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-MD Series |
| Price Range | USD 2,800 – 7,000 |
| Temperature Range | ≤ −20 °C (Long-term & Accelerated Stability Storage) |
| Compliance | ICH Q1–Q5, USP <1151>, Chinese Pharmacopoeia (ChP) General Chapter 9001, FDA Guidance for Industry on Stability Testing |
| Data Recording | Integrated Thermal Printer (Adjustable Print Interval), Real-time Temperature Curve Logging |
| Safety Protections | Independent Overtemperature Cut-off, Compressor Overload Protection, SMS Alert System (Power Failure & Temp/Humidity Deviation), Multi-Unit Remote Monitoring Support |
| Operational Features | Frost-Free Operation, Low Energy Consumption, Noise Level <45 dB(A) |
| Ambient Requirements | 5–35 °C, ≤85% RH |
| Dimensions | Depth × Width × Height (Model-Dependent |
| Standard Units | 600 × 650 × 1700 mm) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-MP Series |
| Price Range | USD 2,800 – 7,000 |
| Temperature Range | 6 ± 3 °C |
| Internal Dimensions (W×D×H) | Customizable per configuration |
| Ambient Operating Conditions | 5–35 °C, ≤85% RH |
| Data Recording | Dual-channel (digital + thermal printer), adjustable print interval |
| Safety Protections | Independent over-temperature cutoff, compressor overload protection |
| Compliance | ICH Q1–Q5, USP <1150>, Chinese Pharmacopoeia (2020 Ed.) Chapter 9001, FDA 21 CFR Part 11 (audit trail enabled in software mode) |
| Validation Support | IQ/OQ documentation package and on-site execution service available |