YSEI
Filter
Showing 61–80 of 80 results
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-SD Series |
| Price Range | USD 2,800 – 7,000 |
| Temperature Range | 0°C to 60°C (standard), extended capability to 40°C at 20% RH |
| Humidity Range | 10%–85% RH |
| Uniformity | ±0.5°C temperature / ±3% RH humidity (at setpoint, within working volume) |
| Control Accuracy | ±0.3°C / ±2% RH |
| Power Consumption | ≤1.8 kW (typical at 40°C/75% RH with single compressor active) |
| Ambient Operating Conditions | 5–35°C ambient temperature, ≤85% RH non-condensing |
| Noise Level | ≤55 dB(A) at 1 m |
| Data Recording | Integrated thermal printer with user-adjustable print interval (1 min to 24 h) |
| Safety Protections | Independent overtemperature cutoff, dry-run protection for humidifier, compressor overload relay, dual-stage door switch interlock |
| Remote Alerting | GSM-based SMS alarm for power failure, temperature deviation (>±2°C), humidity deviation (>±5% RH), configurable per chamber and scalable to multi-unit fleet management |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-SD-2T |
| Compliance | FDA 21 CFR Part 11, ICH Q1–Q5, USP <1150>, Chinese Pharmacopoeia (2020 Ed.), GB/T 10586–2025 |
| Temperature Range | 0°C to 60°C (±0.5°C uniformity, ±0.3°C stability) |
| Humidity Range | 10% to 95% RH (±2% RH uniformity, ±1.5% RH stability) |
| Data Logging | Internal 64 MB buffer + removable SD card |
| Connectivity | RS485, USB, Ethernet, Wi-Fi (via SIMS remote platform) |
| Alarm System | SMS alert for power failure, temperature/humidity deviation, door open, and system fault |
| Dual-door Structure | Tempered glass inner door + keyed outer door |
| Safety Protections | Independent overtemperature cutoff, dry-run protection for humidifier, compressor overload protection |
| Power Consumption | ≤1.8 kW (at 40°C/75% RH, single-compressor operation) |
| Ambient Requirements | 5–35°C, ≤85% RH |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-SD-2TA Series |
| Pricing | Upon Request |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SD-2TA |
| Heating Method | Air-Jacketed |
| Cooling Method | Compressor-Based |
| Humidification Water Reservoir | External Tank |
| Temperature Range (with Humidification) | 15–65°C |
| Temperature Range (without Humidification) | 15–65°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±1.0°C |
| Humidity Range | 15–95% RH |
| Humidity Accuracy | ±3% RH |
| Chamber Capacities Available | 220 L, 500 L, 800 L, 1000 L, 2000 L, 3000 L |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-SD-2TD Series |
| Price Range | USD 7,000 – 11,200 (FOB) |
| Compliance | GB/T 10586–2025, JJF 1101–2019, ICH Q1–Q5, USP <1151>, FDA 21 CFR Part 11 (software-enabled), GMP Annex 15 (Validation) |
| Temperature Range | 0°C to 60°C |
| Humidity Range | 10% to 95% RH |
| Temperature Uniformity | ±0.5°C (at 25°C, 60% RH) |
| Humidity Uniformity | ±3% RH (at 25°C, 60% RH) |
| Data Logging Interval | Adjustable from 1 min to 15 min |
| Internal Memory | 64 MB (circular buffer) + SD card (up to 32 GB) |
| Data Retention | ≥3 years at 15-min intervals |
| Communication | RS485, USB, SD card export, Ethernet (via optional Sims remote module) |
| Alarm System | SMS alerts for power failure, temperature/humidity deviation, door breach, and system faults |
| Safety Protections | Independent overtemperature cutoff, dry-run protection for humidifier, compressor overload protection, electromagnetic door lock with key override |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-SDF |
| Price Range | USD 11,200 – 14,000 (FOB) |
| Chamber Configuration | Multi-chamber (independently controlled) |
| Temperature Range | 0°C to 60°C (±0.5°C uniformity) |
| Humidity Range | 10% to 95% RH (±3% RH uniformity, down to 20% RH at 40°C) |
| Compliance | Meets USP <1150>, ICH Q1A–Q1E, FDA 21 CFR Part 11 (with optional audit trail), and Chinese Pharmacopoeia (2020 Ed.) stability testing requirements |
| Data Recording | Built-in thermal printer (adjustable print interval), real-time temperature/humidity curve logging with ≥180-day onboard memory |
| Safety Protections | Independent chamber over-temperature cutoff, humidifier dry-run protection, compressor overload protection, SMS-based alarm system (power failure, deviation >±2°C/±5% RH) |
| Power Consumption | ≤2.8 kW per chamber (measured at 40°C / 75% RH with single refrigeration unit active) |
| Ambient Operating Conditions | 5–35°C ambient, ≤85% RH non-condensing |
| Structural Design | Stainless steel interior, double-glazed insulated doors, forced-air circulation with PID-controlled dual-loop HVAC |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | OEM Manufacturer |
| Region of Origin | Domestic (China) |
| Model | SHH-SDF-2TA |
| Pricing | Upon Request |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SDT |
| Price Range | USD 11,200 – 14,000 (FOB China) |
| Chamber Independence | Fully Independent Control per Chamber |
| Temperature Range | 0°C to 60°C (±0.5°C uniformity) |
| Humidity Range | 10% to 95% RH (±3% RH accuracy) |
| Low-Humidity Capability | 20% RH @ 40°C |
| Data Recording | Integrated thermal printer with adjustable print interval |
| Compliance | Meets USP <1150>, ICH Q1A(R2), Q1B, Q5C, FDA 21 CFR Part 11 (audit trail enabled), and Chinese Pharmacopoeia 2020 Edition Vol. IV General Chapter 9001 |
| Safety Protections | Independent chamber overtemperature cutoff, humidifier dry-run protection, compressor overload protection, SMS-based alarm system for power failure and out-of-spec temperature/humidity events |
| Power Consumption | ≤2.8 kW (per chamber, measured at 40°C / 75% RH with one refrigeration unit active) |
| Ambient Operating Conditions | 5–35°C ambient temperature, ≤85% RH non-condensing |
| Structural Configuration | Modular multi-chamber architecture (standard configuration: 3–6 independently conditioned chambers |
| Data Output | Time-stamped温湿度 history curves + tabular CSV export via USB port |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SDT-2TA |
| Heating Method | Air-Jacketed |
| Cooling Method | Compressor-Based |
| Humidification Water Tank | External |
| Temperature Range (with Humidification) | 15–65 °C |
| Temperature Range (without Humidification) | 15–65 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±1 °C |
| Humidity Range | 15–95 %RH |
| Humidity Accuracy | ±3 %RH |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-SSD |
| Price Range | USD 11,200 – 14,000 (FOB) |
| Chamber Independence | Fully Independent Control per Chamber |
| Temperature Range | 0°C to 60°C (±0.5°C uniformity) |
| Humidity Range | 10%–95% RH (±3% RH accuracy) |
| Low-Humidity Capability | 20% RH @ 40°C |
| Data Recording | Built-in thermal printer with adjustable print interval |
| Compliance | Meets USP <1150>, ICH Q1A(R3), Q5C, FDA 21 CFR Part 11 (audit trail enabled), and Chinese Pharmacopoeia 2020 Edition Vol. IV General Chapter <9001> |
| Safety Protections | Independent chamber overtemperature cutoff, dry-run protection for humidifier, compressor overload protection, SMS-based real-time alarm (power failure, T/RH deviation, multi-unit monitoring) |
| Power Consumption | ≤2.8 kW (per chamber, at 40°C/75% RH, single-compressor operation) |
| Ambient Operating Conditions | 5–35°C ambient, ≤85% RH non-condensing |
| Structural Configuration | Modular stacked chambers (standard 2–4 chambers), each with dedicated sensor array, PID-controlled heating/cooling/humidification/dehumidification systems |
| Data Integrity | Time-stamped, tamper-evident digital + paper logs |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SSD Series |
| Price Range | USD 11,200 – 14,000 (FOB) |
| Chamber Independence | Fully Independent Control per Chamber |
| Temperature Range | 0°C to 60°C (±0.5°C uniformity) |
| Humidity Range | 10% to 95% RH (±3% RH accuracy) |
| Low-Humidity Capability | 20% RH @ 40°C |
| Compliance | ICH Q1A(R3), Q1B, Q5C |
| Data Recording | Integrated thermal printer with adjustable print interval (1 min–24 h) |
| Safety Systems | Independent chamber overtemperature cutoff |
| Power Consumption | ≤2.8 kW (per chamber, typical at 40°C/75% RH) |
| Ambient Operating Conditions | 5–35°C ambient, ≤85% RH non-condensing |
| Structural Design | Modular stacked chassis with removable single-layer photo-sensitive shelving (standard configuration) |
| Acoustic Performance | ≤52 dB(A) at 1 m distance |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SSD-2STA |
| Price Range | USD 14,000 – 21,000 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-SSD-2STA Series |
| Price Range | USD 14,000 – 21,000 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-SSD-2TA |
| Price Range | USD 21,000 – 28,000 (FOB) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SSD-2TA Series |
| Price Range | USD 21,000 – 28,000 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-SSGD |
| Price Range | USD 11,200 – 14,000 (FOB) |
| Chamber Independence | Fully Independent Control per Chamber |
| Temperature Range | 0°C to 60°C (±0.5°C uniformity) |
| Humidity Range | 10% to 95% RH (±3% RH accuracy) |
| Low-Humidity Capability | 20% RH at 40°C |
| Data Recording | Built-in thermal printer with adjustable print interval |
| Compliance | Meets USP <1150>, ICH Q1A–Q1E, FDA 21 CFR Part 11 (audit trail enabled), and Chinese Pharmacopoeia 2020 Edition Chapter 9001 |
| Safety Protections | Independent chamber overtemperature cutoff, dry-run protection for humidifier, compressor overload protection, SMS-based real-time alarm (temperature/humidity deviation, power failure) |
| Power Consumption | ≤2.8 kW per chamber (measured at 40°C / 75% RH with one refrigeration unit active) |
| Ambient Operating Conditions | 5–35°C ambient temperature, ≤85% RH non-condensing |
| Structural Configuration | Modular multi-chamber architecture with optional 1–4 independently controlled chambers |
| Data Output | Time-stamped温湿度 history curves + tabular CSV export via USB port |
| Validation Support | IQ/OQ protocols included |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | SHH-SSGD-2STA |
| Price Range | USD 14,000 – 21,000 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-SSGD-2TA |
| Price Range | USD 21,000 – 28,000 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-XXW-SD Series |
| Price Range | USD 28,000 – 70,000 (FOB) |
| Internal Dimensions (D×W×H) | Customizable per client specification |
| Temperature Range | 20–50 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Heating Rate | 0.5 °C/min (customizable) |
| Humidity Range | 50–90 % RH |
| Humidity Uniformity | ±3 % RH |
| Power Supply | 220 V / 50 Hz |
| Data Storage | 64 MB internal cyclic memory + SD card export + optional real-time PC logging via RS485 |
| Remote Monitoring | Supported via Sims software over LAN/internet (up to 30 units per host) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-XXW-SD Series |
| Price Range | USD 28,000 – 70,000 (FOB) |
| Internal Dimensions (D×W×H) | Custom-engineered per client specification |
| Temperature Range | 20–50 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Heating Rate | 0.5 °C/min (adjustable per configuration) |
| Humidity Range | 50–90 % RH |
| Humidity Uniformity | ±3 % RH |
| Power Supply | 220 V / 50 Hz |