Zhicheng
Filter
Showing 31–60 of 85 results
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | ZWYD-2402 |
| Instrument Type | Dual-Unit Stacked Orbital Shaker with Independent Temperature Control |
| Display | LCD (Chinese UI) |
| Control System | PID Microprocessor-Based Environmental Scanning Controller |
| Chamber Count | 2 Independent Units |
| Temperature Range | 4–60 °C |
| Temp. Resolution | 0.1 °C |
| Temp. Stability | ±0.1 °C at 37 °C |
| Temp. Uniformity | ±1.0 °C at 37 °C |
| Orbital Speed Range | 30–300 rpm |
| Speed Accuracy | ±1 rpm |
| Orbit Diameter | 0–50 mm (Continuously Adjustable) |
| Tray Dimensions | 800 × 430 mm |
| Max Load Capacity | 250 mL × 64 or 500 mL × 52 or 1000 mL × 28 or 2000 mL × 16 |
| External Dimensions (W×D×H) | 1100 × 950 × 1310 mm |
| Net Weight | 407 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Total Power Consumption | 2400 W |
| Cooling Method | Air-Cooled R134a Refrigeration System with Frost-Free Operation |
| Safety Features | Dual Independent Over-Temp Protection, Leakage & Over-Current Circuit Breaker, Emergency Shutdown via Backup Actuator, Door Interlock Switch, Low-Water & Sensor-Fault Alarms |
| Programmability | 9-segment / 18-step temperature & speed ramping |
| Timer | 0–9999 min |
| Optional Interfaces | RS-232 Serial Port, Embedded Thermal Printer |
| Construction | 304 Stainless Steel Interior with Rounded Corners |
| Acceleration Profile | Soft-Start Ramp Control |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | ZWYD-2403 |
| Instrument Type | Multi-Unit Stacked Orbital Shaker |
| Display | LCD with Full Chinese UI (Operator Interface) |
| Control System | PID Microprocessor-Based Environmental Scanning Controller |
| Chamber Material | 304 Stainless Steel with Rounded Corners |
| Drive Mechanism | Single-Axis Balanced Drive |
| Air-Cooled Refrigeration | R134a, Frost-Free, Power-Modulated |
| Temperature Range | 4–60 °C |
| Temp. Resolution | 0.1 °C |
| Temp. Uniformity | ±1 °C @ 37 °C |
| Temp. Stability | ±0.5 °C @ 37 °C |
| Orbit Diameter | Φ0–50 mm (Continuously Adjustable) |
| Speed Range | 30–300 rpm |
| Speed Accuracy | ±1 rpm |
| Programmable Ramp/Soak | 999.9 min/segment |
| Timer Range | 9999 min |
| Chamber Count | 3 Independent Units |
| Tray Dimensions | 800 × 430 mm per unit |
| Max Load Capacity | 96 × 250 mL or 78 × 500 mL or 42 × 1000 mL flasks |
| External Dimensions (W×D×H) | 1100 × 950 × 1620 mm |
| Net Weight | 550 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Total Power Consumption | 3600 W |
| Safety Systems | Dual Independent Overtemperature Cutouts (Adjustable & Fixed), Leakage Current Protection, Overcurrent Trip, Motor Overspeed Lockout, Door Interlock, Low-Water Alarm, Sensor Fault Detection, Compressor Overload Protection, Auto-Recovery After Power Failure |
| Optional Accessories | Embedded Thermal Printer, RS232 Communication Port |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Benchtop Incubated Orbital Shaker with In Situ Optical Density Detection |
| Model | ZWYF-290 |
| Pricing Range | USD 28,000 – 70,000 |
| Timer Range | 0–500 h |
| Oscillation Frequency | 30–300 rpm |
| Orbit Diameter | Φ0–50 mm (infinitely adjustable) |
| Temperature Control Range | 4–60 °C |
| Shelf Configuration | Single-tier platform |
| Optical Detection Channels | 4 / 8 / 12 / 16 (user-selectable) |
| Light Source Wavelength | 580–600 nm (narrowband LED or laser diode) |
| OD₆₀₀ Measurement Range | 0.03–2.5 |
| OD₆₀₀ Accuracy at OD = 1.0 | ±0.03 |
| OD Stability (8 h, OD = 1.0) | ≥95% |
| Sampling Interval | Configurable down to 2 min |
| Continuous Data Logging Duration | >10 h |
| Display | 5.6″ 640×480 65K-color TFT touchscreen |
| Control Algorithm | PID with environmental scan microprocessor |
| Air Circulation | Forced convection |
| Cooling System | R134a-based refrigeration, frost-free, power-regulated |
| Safety Features | Dual independent overtemperature cutoffs, overspeed alarm, sensor fault detection, leakage protection, current trip, door–platform interlock, auto-restart after power recovery |
| Power Input | AC 220 V, 50/60 Hz |
| Rated Power | 1400 W |
| Net Weight | 93 kg |
| Internal Chamber Dimensions (L×W×H) | 937 × 572 × 420 mm |
| External Dimensions (L×W×H) | 1320 × 960 × 590 mm |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZWYR-200D |
| Display | 4.3" 480×272-pixel 65K-color capacitive touchscreen |
| Control System | PID-based microprocessor with environmental scanning algorithm |
| Temperature Range | 4–60 °C |
| Temp. Resolution | 0.1 °C |
| Temp. Uniformity | ≤±1 °C (at 37 °C) |
| Temp. Stability | ≤±0.1 °C (at 37 °C) |
| Orbit Speed | 30–600 rpm |
| Speed Accuracy | ±1 rpm |
| Orbit Diameter | Φ0–50 mm (infinitely adjustable) |
| Chamber Volume | 69 L |
| Shelf Dimensions | 400 × 370 mm |
| Internal Chamber | 490 × 450 × 315 mm |
| External Dimensions | 774 × 732 × 605 mm |
| Power Supply | AC 220 V, 50/60 Hz |
| Power Consumption | 700 W |
| Cooling Method | Air-cooled, R134a refrigerant, frost-free, power-regulated compressor |
| Programmability | 9-segment / 18-step program with ramp-hold logic, up to 99 cycles per program |
| Timer Range | 0–9999 min |
| Safety Systems | Dual independent overtemperature cutoff (main + mechanical backup), overspeed alarm, door-open stop, leakage current protection, compressor overload protection, fire-resistant heating cutoff |
| Data Interface | RS-232 serial port |
| Compliance | Designed for GLP-compliant labs |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | ZWYR-2102 |
| Instrument Type | Refrigerated Orbital Incubator Shaker |
| Display | 4.3-inch 480×272-pixel 65K-color TFT capacitive touchscreen |
| Control System | PID microprocessor with environmental scanning algorithm |
| Temperature Range | 4–60 °C |
| Temp. Resolution | ±0.1 °C |
| Temp. Uniformity | ≤±1 °C (at 37 °C) |
| Temp. Stability | ≤±0.1 °C (at 37 °C) |
| Oscillation Mode | Orbital (circular motion) |
| Speed Range | 30–300 rpm |
| Speed Accuracy | ±1 rpm |
| Orbit Diameter | Φ35 mm |
| Programmability | 9-segment / 18-step ramp-and-hold protocol (each segment: 0–999.9 min |
| Chamber Volume | 332 L |
| Dual-Shelf Capacity | 2 independent platforms (734 × 458 mm each) |
| Internal Dimensions | 837 × 543 × 797 mm (W×D×H) |
| External Dimensions | 1180 × 760 × 1530 mm |
| Cooling System | Air-cooled R134a compressor with frost-free, power-modulated operation |
| Safety Systems | Independent overtemperature cutoff, door-open stop, leakage current protection, motor overcurrent shutdown, refrigeration overload protection, dual-limit speed/temperature deviation alarms |
| Data Interface | Built-in thermal printer + RS-232 serial port |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1200 W |
| Net Weight | 235 kg |
| Gross Weight | 272 kg |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM Manufacturer |
| Product Category | Domestic |
| Model | ZWYR-2102C |
| Pricing Range | USD 2,800–7,000 (FOB Shanghai) |
| Instrument Type | Orbital Shaker |
| Timer Range | 0–9999 min |
| Oscillation Frequency | 30–300 rpm |
| Orbit Diameter | Φ26 mm |
| Temperature Range | 4–60 °C |
| Shelf Count | 2 |
| Display | 4.3″ 480×272-pixel 65K-color TFT touch screen |
| Control System | PID microprocessor with environmental scanning algorithm |
| Air Circulation | Forced convection |
| Oscillation Mode | Orbital |
| Drive Mechanism | Multi-dimensional balanced drive |
| Temp. Resolution | ±0.1 °C |
| Temp. Stability | ≤±0.1 °C at 37 °C |
| Temp. Uniformity | ≤±1.0 °C at 37 °C |
| Speed Accuracy | ±1 rpm |
| Safety Features | Dual over-temperature cutoff (independent mechanical & electronic), door-open stop, leakage current protection, compressor overload protection, speed deviation alarm, temperature deviation alarm |
| Programming | 9-segment / 18-step program with ramp-hold cycles, up to 99 repeats per segment |
| Data Interface | RS-232 serial port |
| Power | 950 W |
| Voltage/Frequency | AC 220 V, 50/60 Hz |
| Internal Chamber Volume | 173 L |
| Chamber Dimensions (W×D×H) | 615×440×640 mm |
| Deck Size (W×D) | 496×350 mm |
| Net Weight | 165 kg |
| Gross Weight | 190 kg |
| External Dimensions (W×D×H) | 720×650×1310 mm |
| Packaging Dimensions (W×D×H) | 840×770×1480 mm |
| Refrigeration | Air-cooled R134a compressor with frost-free, power-modulated cooling |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | ZWYR-2112B |
| Instrument Type | Refrigerated Orbital Incubator Shaker |
| Display | 5.6-inch 640×480-pixel 65K-color resistive touchscreen HMI |
| Control System | PID-based microprocessor with environmental scanning logic |
| Temperature Range | 4–60 °C |
| Temperature Resolution | ±0.1 °C |
| Temp. Uniformity | ≤±1 °C (at 37 °C) |
| Temp. Stability | ≤±0.1 °C (at 37 °C) |
| Orbit Diameter | Φ35 mm |
| Speed Range | 30–300 rpm |
| Speed Accuracy | ±1 rpm |
| Programmability | 9-segment / 18-step ramp-and-hold protocol (each segment: 0–999.9 min |
| Chamber Volume | 582 L |
| Dual Shaking Platforms | 2 × 970 × 560 mm |
| Refrigeration | R134a-based air-cooled system with frost-free operation |
| Safety | Triple-layer protection (personnel, sample, equipment), independent overtemperature cutoff, door-safety interlock, leakage current protection, compressor overload protection, speed/temperature deviation alarms |
| Data Interface | RS-232 serial port + embedded thermal printer |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1420 W |
| Net Weight | 456 kg |
| Overall Dimensions (W×D×H) | 1430 × 865 × 1710 mm |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Category | Domestic |
| Model | ZWYR-211C |
| Instrument Type | Orbital Incubator Shaker |
| Timer Range | 0–9999 min |
| Oscillation Frequency | 30–300 rpm |
| Orbit Diameter | Φ26 mm |
| Temperature Range | 4–60 °C |
| Shelf Quantity | 1 |
| Display | 4.3″ 480×272-pixel 65K-color TFT capacitive touchscreen |
| Control System | PID microprocessor with environmental scanning algorithm |
| Programming | 9-segment / 18-step programmable sequence (each segment: 0–999.9 min |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤±1 °C at 37 °C |
| Temperature Stability | ≤±0.1 °C at 37 °C |
| Air Circulation | Forced convection |
| Drive Mechanism | Multi-dimensional balanced drive |
| Cooling System | R134a-based air-cooled refrigeration with frost-free operation and auto-load modulation |
| Safety Features | Dual independent overtemperature cutoff (main + backup), door-open stop, leakage current protection, overcurrent trip, motor overspeed detection, refrigeration overload protection |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1120 W |
| Chamber Volume | 256 L |
| Interior Dimensions (W×D×H) | 975 × 565 × 465 mm |
| Shelf Dimensions (W×D) | 920 × 500 mm |
| Net Weight | 183 kg |
| Gross Weight | 228 kg |
| External Dimensions (W×D×H) | 1230 × 760 × 1050 mm |
| Packaging Dimensions (W×D×H) | 1350 × 880 × 1220 mm |
| Data Interface | RS-232 serial port |
| Optional Output | Built-in thermal printer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Benchtop Incubator Shaker |
| Model | ZWYR-211D |
| Temperature Range | 4–60 °C |
| Temperature Uniformity | ≤±1 °C (at 37 °C) |
| Temperature Stability | ≤±0.1 °C (at 37 °C) |
| Temperature Resolution | 0.1 °C |
| Orbital Speed Range | 30–300 rpm |
| Speed Accuracy | ±1 rpm |
| Orbit Diameter | Φ26 mm |
| Chamber Volume | 304 L |
| Shelf Dimensions | 940 × 584 mm |
| Internal Dimensions | 1000 × 655 × 465 mm |
| External Dimensions | 1290 × 850 × 1050 mm |
| Net Weight | 263 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Power Consumption | 1340 W |
| Cooling System | Air-cooled R134a compressor with frost-free operation |
| Programmability | 9-segment, 18-step ramp-and-hold protocol |
| Timer Range | 0–9999 min |
| Safety Features | Dual independent overtemperature cutoff, door-open shutdown, leakage current protection, motor overspeed monitoring, refrigeration overload protection |
| Interface | Built-in thermal printer, RS-232 serial port, 4.3" 480×272-pixel 65K-color capacitive touchscreen HMI |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZWYR-240 |
| Instrument Type | Orbital Incubator Shaker |
| Timer Range | 0–9999 min |
| Oscillation Frequency | 30–400 rpm |
| Orbit Diameter | Φ0–50 mm (infinitely adjustable) |
| Temperature Range | 4–60 °C |
| Shelf Quantity | 1 |
| Display | 4.3″ TFT color touchscreen (480×272 pixels, 65K colors) |
| Control System | PID microprocessor with environmental scanning algorithm |
| Programming | 9 segments × 18 steps (each segment supports ramp/hold |
| time per step | 0–999.9 min |
| Temperature Uniformity | ≤±1 °C at 37 °C |
| Temperature Stability | ≤±0.1 °C at 37 °C |
| Temperature Resolution | 0.1 °C |
| Speed Accuracy | ±1 rpm |
| Chamber Volume | 69 L |
| Interior Dimensions (W×D×H) | 490×450×335 mm |
| Shelf Size | 400×370 mm |
| Power | 700 W |
| Voltage/Frequency | AC 220 V, 50/60 Hz |
| Safety Features | Dual overtemperature cutoff (independent mechanical & electronic), door-open stop, leakage current protection, overload current cutoff, compressor overheat protection, refrigerant: R134a |
| Data Interface | RS-232 port |
| Cooling Method | Air-cooled, frost-free, power-regulated compressor cooling |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | ZWYR-C2403 |
| Instrument Type | Multi-Zone Stackable Incubator Shaker |
| Display | 5.6-inch 640×480-pixel 65K-color capacitive touchscreen |
| Control System | PID microprocessor-based environmental scanning controller |
| Programmability | 9-segment / 18-step programmable protocol (temperature ramping, cycling, stepwise profiles) |
| Chamber Configuration | 3 independent incubation zones |
| Temperature Range | 4–60 °C |
| Temp. Resolution | 0.1 °C |
| Temp. Stability | ±0.5 °C at 37 °C |
| Temp. Uniformity | ±1.0 °C at 37 °C |
| Orbital Speed Range | 30–300 rpm |
| Speed Accuracy | ±1 rpm |
| Orbit Diameter | 0–50 mm (continuously adjustable) |
| Chamber Volume per Zone | 192 L |
| Tray Dimensions | 800 × 430 mm (3 trays total) |
| Internal Dimensions per Zone | 920 × 532 × 393 mm |
| External Dimensions | 1300 × 950 × 1890 mm |
| Net Weight | 610 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Total Power Consumption | 3600 W |
| Cooling Method | Air-cooled, R134a refrigerant, frost-free, zone-independent cooling |
| Safety Systems | Dual independent overtemperature cutoffs (adjustable and fixed), leakage current protection, overcurrent circuit breaker, motor overspeed monitoring, low-water level detection, sensor fault diagnostics, independent overheat prevention hardware, door interlock safety switch |
| Optional Modules | CO₂ concentration control (0–20% v/v), humidity control (20–95% RH, ±3% RH accuracy), embedded thermal printer, RS-232 serial interface |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | ZWYR-D2401 |
| Instrument Type | Stackable Orbital Shaker |
| Timer Range | 0–9999 min |
| Oscillation Frequency | 30–300 rpm |
| Amplitude | Φ0–50 mm, infinitely adjustable |
| Temperature Control Range | 4–60 °C |
| Number of Shaking Platforms | 1 |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZWYR-D2402 |
| Instrument Type | Dual-Deck Orbital Incubator Shaker |
| Timer Range | 0–9999 min |
| Oscillation Frequency | 30–300 rpm |
| Oscillation Amplitude | Ø0–50 mm (continuously adjustable) |
| Temperature Control Range | 4–60 °C |
| Number of Shaking Platforms | 2 |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2050 |
| Pricing | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric (Air-Jacketed) |
| Display | LCD |
| Air Circulation | Top-Mounted Micro-Airflow System |
| Door Configuration | Dual Doors (Inner Tempered Glass Observation Door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | RT + 5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programming Capacity | 10 Segments / 18 Steps |
| Step Duration Range | 1–999 minutes per step |
| Chamber Volume | 50 L |
| Interior Dimensions (W×D×H) | 350 × 350 × 410 mm |
| External Dimensions (W×D×H) | 470 × 465 × 760 mm |
| Net Weight | 33 kg |
| Power Consumption | 350 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Shelving | 2 Standard Stainless Steel Electropolished Shelves (Expandable to 4) |
| Interior Material | Mirror-Finish Stainless Steel |
| Safety Systems | Independent Over-Temperature Protection (Adjustable 30–80 °C), Independent Over-Heat Prevention Device, Leakage Current & Over-Current Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Data Interface | RS-232 Serial Port |
| Optional Output | Embedded Thermal Printer |
| Additional Functions | Auto Start/Stop, Clock Display, Parameter Memory with Password Protection, Temperature Display Calibration, Power Recovery After Interruption, Monitoring Timer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2080 |
| Pricing | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric (Air-Jacketed) |
| Display | LCD |
| Air Circulation | Top-Mounted Micro-Airflow System |
| Door Configuration | Dual Doors (Inner Tempered Glass Viewing Door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Setpoint Modes | Fixed-Value or Stepwise Programming |
| Program Structure | 10 Segments (Segment “0” = Pre-Set Standby |
| Step Duration Range | 1–999 Minutes per Step |
| Temperature Range | Ambient +5 °C to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C at 37 °C |
| Chamber Capacity | 80 L |
| Interior Dimensions (W×D×H) | 400 × 400 × 500 mm |
| External Dimensions (W×D×H) | 520 × 515 × 850 mm |
| Net Weight | 40 kg |
| Power Consumption | 400 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Shelf Quantity | 2 Standard (Expandable to 4) |
| Safety Systems | Independent Over-Temperature Protection (Adjustable 30–80 °C), Independent Over-Heat Prevention Device, Leakage Current & Over-Current Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Data Interface | RS-232 Serial Port |
| Optional Output | Embedded Micro-Printer |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Finish | Electro-Polished Stainless Steel |
| Airflow Design | Optimized 3D Convection Pathway |
| Surface Finish | Aesthetic, High-Gloss Exterior Enclosure |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2120 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric Heating |
| Display | LCD |
| Air Circulation | Top-mounted Micro-airflow System |
| Door Configuration | Dual-door (inner tempered glass observation door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | RT + 5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programmable Stages | 10 segments (Segment “0” = preset timing |
| Total Steps | 18 |
| Step Duration Range | 1–999 minutes per step |
| Chamber Capacity | 120 L |
| Interior Dimensions (W×D×H) | 450 × 450 × 600 mm |
| External Dimensions (W×D×H) | 570 × 565 × 950 mm |
| Net Weight | 51 kg |
| Power Consumption | 500 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Safety Features | Independent over-temperature cut-off (adjustable 30–80 °C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Data Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Interior Material | Mirror-finish stainless steel |
| Shelf Finish | Electro-polished stainless steel |
| Airflow Design | Optimized 3D laminar micro-circulation duct system |
| Diagnostic Functions | Self-diagnostic firmware with real-time status logging |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2160 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric Heating |
| Display | LCD |
| Air Circulation | Top-mounted Micro-airflow System |
| Door Configuration | Dual-door (inner tempered glass observation door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | RT + 5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programmable Segments/Steps | 10 segments (Segment “0” = pre-scheduled standby |
| Step Duration Range | 1–999 minutes per step |
| Chamber Capacity | 160 L |
| Interior Dimensions (W×D×H) | 500 × 500 × 650 mm |
| External Dimensions (W×D×H) | 620 × 615 × 1000 mm |
| Net Weight | 57 kg |
| Power Consumption | 500 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Safety Features | Independent over-temperature prevention (adjustable 30–80 °C), independent thermal cutoff, leakage current protection, over-current trip, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Auxiliary Functions | Auto-start/auto-stop, elapsed time monitoring timer, power recovery mode, parameter memory with password protection, display calibration, RS-232 serial interface, built-in micro-printer output |
| Interior Construction | Mirror-finish stainless steel chamber, electropolished stainless steel shelves (standard 2, max 4), optimized cleanroom-grade cavity geometry |
| Airflow Design | Balanced 3D laminar micro-circulation ducting |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2270 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric Heating |
| Display | LCD |
| Air Circulation | Top-mounted Micro-airflow System |
| Door Configuration | Dual-door (inner tempered glass observation door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | Ambient +5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programming Capacity | 10 Segments / 18 Steps (Segment “0” = Pre-set Timing |
| Step Duration Range | 1–999 minutes per step |
| Chamber Volume | 270 L |
| Interior Dimensions (W×D×H) | 600 × 550 × 820 mm |
| External Dimensions (W×D×H) | 720 × 665 × 1170 mm |
| Net Weight | 90 kg |
| Power Consumption | 700 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Safety Features | Independent Over-temperature Prevention (adjustable 30–80 °C), Independent Overheat Protection, Leakage Current & Overcurrent Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Auxiliary Functions | Auto Start/Stop, Monitoring Timer, Power Recovery Mode, Parameter Memory, Temperature Display Calibration, RS-232 Communication Interface, Embedded Thermal Printer Output |
| Interior Material | Mirror-finish Stainless Steel |
| Shelf Configuration | 2 standard shelves (expandable to 4) |
| Airflow Design | Optimized 3D laminar micro-circulation duct system |
| Surface Finish | Electropolished stainless steel shelving, Cleanroom-compatible cavity geometry |
| Brand | ZHICHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | ZXDR-2430 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZXDR-2800 |
| Display | 7-inch 800×480-pixel 65K-color touchscreen |
| Control System | PID microprocessor-based environmental scanning controller |
| Temperature Range | Ambient +5°C to 65°C |
| Temp. Resolution | ≤±0.1°C |
| Temp. Uniformity | ≤±0.3–1.0°C |
| Temp. Stability (Fluctuation) | ≤±0.1°C |
| Chamber Volume | 800 L |
| Internal Dimensions (W×D×H) | 840×800×1200 mm |
| External Dimensions (W×D×H) | 990×905×1690 mm |
| Net Weight | 168 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Heating Power | 1500 W |
| Air Circulation | Forced convection with optimized micro-airflow duct design |
| Door | Double-layer door with inner safety glass panel |
| Safety Features | Triple independent protection — leakage/overcurrent cutoff, backup thermal cut-off, adjustable overtemperature limiter, self-diagnostic alarm system |
| Programmability | 9-segment / 18-step programmable cycle with ramp-hold capability (max. 999.9 min per segment) |
| Compliance | Designed for GLP-compliant laboratories |
| Optional Interfaces | RS-232 serial port |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5090 |
| Pricing | Upon Request |
| Capacity | 90 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Programmability | 10 segments / 18 steps |
| Segment Duration | 1–999 minutes per step |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward forced convection from bottom heater |
| Internal Chamber Dimensions (W×D×H) | 400 × 445 × 485 mm |
| External Dimensions (W×D×H) | 590 × 575 × 865 mm |
| Net Weight | 55 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1100 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Data Interface | RS-232 port |
| Optional Output | Embedded thermal microprinter |
| Insulation | Double-wall insulated chamber with outer door glass compliant with EN 61000-3-2 and EN 61000-6-3 safety standards |
| Interior Material | Mirror-finish stainless steel |
| Door | Tempered double-glazed inner door |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5140 |
| Quotation | Upon Request |
| Capacity | 140 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward convection from bottom-mounted heater |
| Programming | 10 segments / 18 steps (Segment 0 = pre-set timing |
| Step Duration | 1–999 minutes per step |
| Internal Dimensions (W×D×H) | 500×470×600 mm |
| External Dimensions (W×D×H) | 690×600×980 mm |
| Net Weight | 80 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1600 W |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Insulation | High-efficiency mineral wool with double-wall construction |
| Interior Material | Mirror-finish stainless steel |
| Door | Double-glazed tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5250 |
| Quotation | Upon Request |
| Capacity | 250 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Mode | Vertical Forced Convection from Bottom |
| Programmability | 10 Segments / 18 Steps |
| Time per Step | 1–999 min |
| Interior Dimensions (W×D×H) | 600 × 550 × 750 mm |
| External Dimensions (W×D×H) | 790 × 680 × 1220 mm |
| Net Weight | 108 kg |
| Power Rating | 2100 W |
| Voltage/Frequency | AC 220 V, 50/60 Hz |
| Safety Features | Independent Over-Temperature Protection (adjustable 30–80°C), Overheat Prevention Device, Leakage Current & Overcurrent Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Connectivity | RS-232 Interface, Embedded Micro-Printer Output |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Insulation | High-Efficiency Ceramic Fiber with Triple-Layer Door Sealing |
| Compliance | Designed per IEC 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use) |
| Brand | ZhiCheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXFD-A5430 |
| Pricing | Upon Request |
| Capacity | 430 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward convection from bottom-mounted blower |
| Programming | 10 segments / 18 steps (Segment 0 = pre-set timing |
| Step Duration | 1–999 minutes per step |
| Internal Dimensions (W×D×H) | 700 × 650 × 950 mm |
| External Dimensions (W×D×H) | 890 × 780 × 1420 mm |
| Net Weight | 170 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 3100 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms, self-diagnostic system |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal microprinter |
| Insulation | High-efficiency ceramic fiber + double-wall construction |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Double-glazed tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Heating System | Full-perimeter, bottom-mounted heating elements with 360° radiant and convective heat distribution |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5600 |
| Pricing | Upon Request |
| Capacity | 600 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward from bottom |
| Programmability | 10 segments / 18 steps (Segment 0 = pre-set timer |
| Step Duration | 1–999 minutes per step |
| Interior Dimensions (W×D×H) | 800 × 780 × 1000 mm |
| External Dimensions (W×D×H) | 990 × 910 × 1470 mm |
| Net Weight | 210 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 3700 W |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent over-temperature protection (adjustable 30–80°C), independent overheat prevention device, leakage current & overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Connectivity | RS-232 interface, embedded micro-printer output |
| Insulation | Dual-layer door with outer tempered glass compliant with EN 61000-3-2 and EN 60529 IP20 safety requirements |
| Interior Material | Mirror-finish stainless steel |
| Door | Double-glazed tempered glass inner door |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXGP-A2050 |
| Quotation | Available Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±1.0°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.5°C |
| Chamber Capacity | 50 L |
| Internal Dimensions (W×D×H) | 350 × 350 × 410 mm |
| External Dimensions (W×D×H) | 510 × 475 × 780 mm |
| Net Weight | 35 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 510 W |
| Control System | Fuzzy Logic Microprocessor |
| Display | LCD |
| Air Circulation | Top-mounted micro-airflow circulation |
| Door Configuration | Dual-door (outer insulated door + inner tempered glass observation door) |
| Programmability | 10 segments / 18 steps, segment time adjustable from 1–999 minutes |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Data Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Interior Material | Mirror-finish 304 stainless steel |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXGP-A2080 |
| Quotation | Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±1.0°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.5°C |
| Chamber Capacity | 80 L |
| Internal Dimensions (W×D×H) | 400 × 400 × 500 mm |
| External Dimensions (W×D×H) | 560 × 525 × 870 mm |
| Net Weight | 45 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 810 W |
| Control Logic | Fuzzy Logic Algorithm |
| Display | LCD |
| Air Circulation | Top-mounted micro-airflow system |
| Door Configuration | Dual-door (outer insulated door + inner tempered glass observation door) |
| Programming Capability | 10 segments / 18 steps, step duration 1–999 minutes |
| Safety Systems | Independent over-temperature protection (adjustable 30–80°C), independent overheat prevention device, leakage current & overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Data Interface | RS-232 serial port |
| Optional Output | Embedded thermal printer |
| Additional Functions | Auto-start/auto-stop, clock display, power recovery mode, parameter memory with password protection, temperature display calibration, monitoring timer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXGP-A2160 |
| Pricing | Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±1.0°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.5°C |
| Chamber Capacity | 160 L |
| Interior Dimensions (W×D×H) | 500 × 500 × 650 mm |
| External Dimensions (W×D×H) | 660 × 625 × 1020 mm |
| Net Weight | 78 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1210 W |
| Door Configuration | Dual-door (outer insulated door + inner tempered glass observation door) |
| Air Circulation | Top-mounted micro-airflow circulation |
| Control Logic | Fuzzy logic algorithm |
| Programming Capability | 10 segments / 18 steps (Segment “0” = pre-set standby |
| Step Duration Range | 1–999 minutes per step |
| Display | LCD with real-time parameter readout |
| Communication Interface | RS-232 |
| Data Output | Embedded thermal mini-printer |
| Safety Systems | Independent overtemperature cutoff (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms, self-diagnostic monitoring timer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | ZXGP-A2270 |
| Quotation | Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±1.0°C at 37°C |
| Temperature Fluctuation | ≤±0.5°C |
| Programming Capacity | 10 segments / 18 steps |
| Time per Step | 1–999 minutes |
| Display | LCD |
| Air Circulation | Top-mounted micro-airflow system |
| Chamber Volume | 270 L |
| Interior Dimensions (W×D×H) | 600×600×750 mm |
| External Dimensions (W×D×H) | 760×725×1120 mm |
| Net Weight | 115 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1800 W |
| Safety Features | Independent overtemperature cutoff (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power-failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal printer |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Interior Material | Mirror-finish stainless steel |
| Door Configuration | Dual-door design with inner tempered glass observation window |
| Control Algorithm | Fuzzy logic control |
| Operating Ambient | 5–35°C |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | ZXJD-A1160 |
| Pricing | Upon Request |