ZOLIX
Filter
Showing 301–330 of 556 results
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | NXP-3M / NXP-3P / NXP-3NP / NXP-6M / NXP-6P / NXP-6NP |
| Price Range | USD 1,950 – 11,200 (FOB Beijing) |
| Drive Options | Manual (DNXP-M) or Stepper Motor–Driven (DNXP-A, 28-step, 1.8° step angle) |
| Linear Travel (X/Y/Z) | 4 mm |
| Angular Travel (Rx/Ry/Rz) | ±70 mrad (±4°) |
| Transmission Ratio | X/Y = 1:1.5, Z = 1:1, Rotational Axes = 1 µm input → 17 µrad output |
| Resolution | Linear (Open/Closed-Loop Piezo): 1 nm |
| Angular | 0.018 µrad |
| Max Load | 1 kg |
| Resonant Frequency | >130 Hz (±10%) |
| Thermal Drift | ≤1 µm/°C |
| Parallelism of Top Plate | <100 µm |
| Cross-Axis Coupling Error | ≤100 µm |
| Piezo Option | Integrated open-loop or closed-loop piezoelectric actuators (19 µm stroke) |
| Structural Design | Monolithic flexure-based, bearingless, coaxial rotation center architecture |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | OBCL |
| Pricing | Available Upon Request |
| Beam Splitting Ratio | 50% R / 50% T |
| Surface Flatness | λ/4 @ specified wavelength |
| Cube Edge Lengths | 10 mm, 20 mm |
| Coating Design | Laser-line specific, non-polarizing, dielectric multilayer |
| Substrate Material | UV-grade fused silica (for UV models), BK7 (for visible/NIR), or custom IR-grade substrates |
| Angular Deviation | ≤10 arcminutes |
| Wavelength Options | 266 nm, 355 nm, 405 nm, 488 nm, 514 nm, 532 nm, 632.8 nm, 1064 nm, 1300 nm, 1550 nm |
| Broadband Models | OBCB series covering 450–1550 nm in defined bands |
| Brand | ZOLIX |
|---|---|
| Model | OBHS Series |
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Diameter Options | 25.4 mm, 30 mm, 50 mm, 50.8 mm |
| Thickness Options | 5 mm, 6.35 mm, 8 mm |
| High-Reflectance Wavelengths | 355 nm, 532 nm, 1064 nm |
| High-Transmission Wavelengths | Complementary harmonic pairs (e.g., HR @ 1064 nm / HT @ 532 nm) |
| Reflectance (HR) | ≥99.5% |
| Transmission (HT) | ≥85% (for 355/532/1064 nm combinations), ≥95% (for 532/1064 pairs) |
| Substrate Material | Fused silica or BK7 (standard) |
| Surface Quality | 20–10 scratch-dig |
| Wavefront Distortion | λ/4 @ 633 nm (typ.) |
| Damage Threshold | >5 J/cm² @ 10 ns, 10 Hz, 1064 nm (tested) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | OBPL Series |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Model | OIS |
| Type | Polarization-Based Faraday-Free Optical Isolator |
| Core Components | Polarizing Beam Splitter Cube + Zero-Order Quarter-Wave Plate (λ/4 @ 632.8 nm) |
| Waveplate Orientation | Fast Axis at 45° to Incident P-Polarization |
| Isolation Ratio | >20 dB |
| Transmission (P-Pol) | >95% |
| Extinction Ratio (S-Pol Leakage) | <1% |
| Reflectivity (S-Pol) | >99% |
| Material Substrates | K9 Glass & Fused Silica |
| Surface Flatness | λ/4 @ 632.8 nm |
| Surface Quality | 60–40 Scratch-Dig |
| Dimensional Tolerance | ±0.2 mm |
| AR Coating | Broadband Antireflection Coating on All Input/Output Faces (R < 0.25% per surface, 400–1100 nm) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Domestic (China) |
| Model | OLB / OLA / OLBQ / OLAQ / OLBC |
| Pricing | Available Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Origin | Domestic (China) |
| Model Series | OLB |
| Component Category | Optical Lens (Not Light Source) |
| Material Options | K9 Optical Glass (BK7) or UV Fused Silica |
| Surface Quality | 40–20 scratch-dig |
| Focal Length Tolerance | ±2% EFL |
| Diameter Tolerance | +0.0 / –0.1 mm |
| Center Thickness Tolerance | ±0.2 mm |
| Coating | Uncoated (Optional AR Coating Available per Request) |
| Available Diameters | 12.7 mm, 20 mm, 25 mm, 25.4 mm, 38.1 mm, 50 mm, 50.8 mm |
| Available EFLs | 25.4 mm to 500 mm |
| Brand | ZOLIX |
|---|---|
| Material | K9 Optical Glass |
| Focal Length Tolerance (EFL) | ±2% |
| Dimensional Tolerance | +0.0 / −0.2 mm |
| Coating | Uncoated |
| Product Category | Optical Component |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (OEM/ODM Capable) |
| Brand | ZOLIX |
|---|---|
| Model Series | OLD (K9 BK7) / OLDQ (UV Fused Silica) |
| Material | Optical Grade K9 Glass (BK7) or UV Fused Silica |
| Diameter Tolerance | +0.0 / −0.1 mm |
| Effective Focal Length (EFL) Tolerance | ±2% |
| Coating | Uncoated |
| Standard Diameters | 25 mm, 25.4 mm |
| Available EFLs | −50 mm, −100 mm, −200 mm |
| Component Category | Optical Element |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (Beijing Zolix Instruments Co., Ltd.) |
| Brand | ZOLIX |
|---|---|
| Model | Lifetime Aging Test System |
| Type | Integrated Automated OLED Degradation Monitoring Platform |
| Origin | Beijing, China |
| Power Supply | 5 kW / 380 V AC |
| Temperature Range Options | −40 °C to 150 °C, −20 °C to 150 °C, or 0 °C to 150 °C |
| Heating Rate | 2–4 °C/min (nonlinear, no-load) |
| Cooling Rate | 0.7–1.0 °C/min (nonlinear, no-load) |
| Temp. Resolution | ±0.01 °C |
| Humidity Range | 20–98% RH (within 25–85 °C) |
| Humidity Resolution | ±0.1% RH |
| Temp. Uniformity | ±2.0 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Stability | ±2.0% RH |
| Humidity Deviation | ±3% RH (at >75% RH) |
| Channel Configurations | Up to 128 independent current/voltage monitoring channels |
| Control Interface | Touchscreen HMI with programmable temperature/humidity profiles |
| Compliance | Designed for GLP-aligned operational traceability and ASTM D7602-22 (Standard Practice for Accelerated Aging of Organic Light-Emitting Diode Devices) support |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM/ODM Manufacturer |
| Product Origin | Domestic (China) |
| Models | OLPA25.4-050, OLPA25.4-060, OLPA25.4-080, OLPA25.4-100, OLPA25.4-120, OLNA25.4-050 |
| Diameter | 25.4 mm |
| Focal Lengths | +50 mm to +120 mm (Positive), –50 mm (Negative) |
| Center Thickness (TC1/TC2) | 2–7.8 mm |
| Back Focal Length (fb) | 44.5–117.1 mm (Positive), –53.3 mm (Negative) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | OM512 |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Yes |
| Type | Domestic Optical Component |
| Coating Options | Aluminum (Al), Protected Aluminum (Al+MgF₂), Enhanced Aluminum (EAV), UV-Enhanced Aluminum (PAUV), Silver (Ag), Protected Silver (PS), Gold (Au), Protected Gold (Au+SiO₂), Rhodium (Rh) |
| Surface Accuracy | λ/4 (standard), λ/10 (high-precision imported variants) |
| Substrate Material | Fused Silica or BK7 (standard), optional CaF₂ or IR-grade substrates |
| Diameter Range | 12.7 mm to 101.6 mm |
| Thickness Range | 4 mm to 12.7 mm |
| Brand | ZOLIX |
|---|---|
| Model | OMB Series |
| Substrate Material | BK7 |
| Surface Accuracy | λ/8 (visible), λ/4 (UV), λ/10 (IR & ultra-broadband) |
| Parallelism | ≤3 arcmin |
| Coating Type | Multi-layer dielectric |
| Reflectance | ≥97% (avg., 245–400 nm), ≥98% (avg., 400–1100 nm & 400–2000 nm), ≥97% (avg., 300–2000 nm) |
| Operating Angle of Incidence | 45° ± 3° |
| Back Surface | Polished (uncoated) |
| Diameter Options | 12.5–50 mm |
| Thickness Options | 4–10 mm |
| Wavelength Ranges | 245–400 nm (UV), 400–700 nm (VIS), 670–905 / 1200–1310 / 1408–1550 nm (NIR), 245–700 / 400–1100 / 400–2000 / 300–2000 nm (ultra-broadband) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | OMFM-2 |
| Pricing | Upon Request |
| Mounting Aperture Width | 40–80 mm |
| Max. Optical Element Thickness | ≤3 mm |
| Base Mounting Holes | Three symmetric M6 threaded holes |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Domestic (China) |
| Model | OMHS Series |
| Price | USD 140 (approx. based on ¥1000 at 1:7.14 exchange rate) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OMHS-LBE22/WJ/CMount |
| Mounting Interfaces | M22×0.75 (LBE22), 4/5″–1/36 (WJ), 1″–1/32 (CMount) |
| Angular Adjustment Range | ±3° per axis |
| Translation Adjustment | Axial (Z-axis) fine translation integrated |
| Compliance | Designed for ISO 10110 optical mounting standards and compatible with standard optomechanical breadboards (e.g., Thorlabs, Newport) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | OMHS20(25/25.4/30)-CS |
| Price | Upon Request |
| Clamp Diameter (A) | 20 mm / 25 mm / 25.4 mm / 30 mm |
| Clear Aperture (B) | 18 mm / 23 mm / 23 mm / 27 mm |
| Tilt Range | ±3° |
| Adjustment Axes | Tip/Tilt + Axial Translation |
| Mounting Interface | Dual-orientation threaded holes (M4 & M6) |
| Retention Mechanism | Spring-loaded retaining ring with PTFE-lined contact surface |
| Locking | Dual-stage mechanical lock (coarse pre-load + fine locking screw) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | OMHS20(25/30)-BS |
| Pricing | Upon Request |
| Mounting Aperture (A) | 20 mm / 25 mm / 30 mm |
| Clear Aperture (B) | 18 mm / 23 mm / 27 mm |
| Angular Adjustment Range | ±3° (Pitch & Yaw) |
| Axial Translation Range | ±1.5 mm (via precision differential micrometer) |
| Base Material | Anodized 6061-T6 aluminum |
| Contact Surface | PTFE-tipped kinematic supports (3-point) |
| Mounting Options | Dual-axis threaded hole pattern (M4 and 1/4"-20) |
| Locking Mechanism | Dual-stage locking (coarse clamp + fine-set screw) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Line | Domestic Optical Mounts |
| Model | OMHS20-S / OMHS25-S / OMHS30-S |
| Clamp Diameter (A) | 20 mm / 25 mm / 30 mm |
| Clear Aperture (B) | 18 mm / 23 mm / 27 mm |
| Tilt Range | ±3° per axis (X/Y) |
| Axial Translation Range | ±1.5 mm (Z-axis, fine-adjustment via precision lead screw) |
| Mounting Interface | Dual-direction threaded holes (M4 and M6, configurable) |
| Locking Mechanism | Dual-stage knurled locking thumbscrews with PTFE-faced contact pads |
| Material | Anodized 6061-T6 aluminum alloy |
| Surface Finish | Hard-anodized black matte (Ra ≤ 0.8 µm) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OMHS38.1/50-BS |
| Clamping Diameter A | 38.1 mm / 50 mm |
| Clear Aperture B | 35 mm / 47 mm |
| Angular Adjustment Range | ±3° |
| Translation Travel Tx | 6 mm |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer | ZOLIX Optics |
| Product Type | Domestic Optical Mount |
| Model | OMHS38.1/50-S |
| Mounting Aperture Diameter A | 38.1 mm / 50 mm |
| Clear Aperture B | 35 mm / 47 mm |
| Angular Adjustment Range | ±3° |
| Translational Travel (Tx) | 6 mm |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | OMHS38.1/50/50.8-CS |
| Clamping Diameter (A) | 38.1 mm / 50 mm / 50.8 mm |
| Clear Aperture (B) | 35 mm / 47 mm / 47 mm |
| Angular Adjustment Range | ±3° |
| Translational Travel (Tx) | 6 mm |
| Material | Stainless Steel (Standard) |
| Mounting Base Compatibility | Standard M6 or 1/4"-20 threaded holes |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Line | OMHSxx-B Series |
| Mounting Aperture (A) | 12.7–50.8 mm |
| Clear Aperture (B) | 11–47 mm |
| Tilt Range | ±3° |
| Adjustment Axes | Tip/Tilt + Axial Translation |
| Structural Design | Open-frame with PTFE Tri-point Support |
| Mounting Options | Dual-axis threaded hole pattern (M4 & M6) |
| Compliance | Designed for ISO/IEC 17025-aligned optical alignment workflows |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Line | OMHSxx-C Series |
| Mounting Aperture (A) | 12.7–50.8 mm |
| Clear Aperture (B) | 11–47 mm |
| Tilt Range | ±3° |
| Axial Translation | Integrated via Precision Threaded Actuator |
| Material | Anodized Aluminum Alloy |
| Contact Interface | PTFE-lined Retaining Ring |
| Mounting Options | Dual-Orientation Base Holes (M4 & M6) |
| Compliance | ISO 10110-7 Compatible Mounting Geometry |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | OminFluo990-DUV |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Model | OML Series |
| Substrate | BK7 |
| Surface Accuracy (pre-coating) | λ/10 (for OML25.4-355-6.35) |
| Diameter Options | 20 mm, 25 mm, 25.4 mm, 30 mm, 50 mm |
| Thickness Options | 4 mm, 5 mm, 6.35 mm |
| Design Wavelengths | 355 nm, 441 nm, 488 nm, 532 nm, 632.8 nm |
| Angle of Incidence | 45° ± 3° |
| Parallelism | ≤ 3 arcminutes |
| Coating Type | Multilayer dielectric stack |
| Laser Damage Threshold | High (optimized for CW and pulsed laser applications) |
| Compliance | ISO 10110-7 (surface form), ISO 14997 (laser damage testing methodology) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | OMLH120 / OMLH120-160 |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | Omni-fs-TA |
| Instrument Type | Transient Absorption Spectrometer |
| Temporal Resolution | 1.5 × Laser Pulse Width |
| Sensitivity | 0.1 ΔmOD (broadband), 0.01 ΔmOD (single-wavelength) |
| Pump Wavelength Ranges | 240–480 nm, 475–1160 nm, 1160–1600 nm, 1600–2600 nm |
| Probe Wavelength Ranges | 300–700 nm |
| Detection Time Window | 4 ns / 8 ns |
| Laser Sources | 800 ± 10 nm, 1030 ± 3 nm |
| Sample Formats | Liquid, Powder, Thin Film |
| Measurement Modes | Transmission, Reflection, Back-Excitation |
| Software Features | Probe Stability Monitoring, Real-Time Spectral Preview, Spectral Calibration, Smoothing, Global & Target Data Fitting |
| Optional Modules | Micro-area Spectroscopy, Wide-field Transient Absorption Imaging, TCSPC (2 ps min. time step, 100 ps min. lifetime range, 0.08 nm spectral resolution), Femtosecond Kerr-Gated Time-Resolved Fluorescence (400–900 nm, 50 fs pulse width, 4 ns window) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | Omni-Imager |
| Price Range | USD 70,000 – 140,000 |
| Operating Principle | Push-broom scanning |
| Imaging Method | Filter-based |
| Deployment Mode | Ground-based and airborne compatible |
| Spectral Resolution | 2.8 nm @ 30 µm slit, 2 nm @ 18 µm slit |
| Detector Types | CCD (1392×1040), sCMOS (2048×2048), EMCCD (512×512), InGaAs (320×256 / 640×512) |
| Spectral Ranges | 400–1000 nm (Vis-NIR), 900–1700 nm (NIR) |
| Numerical Aperture | f/2.4 (Vis-NIR), f/2.0 (NIR) |
| Slit Dimensions | 30 µm × 14.2 mm (standard), 18 µm × 14.2 mm (optional) |
| Data Depth | 12-bit / 16-bit |
| Interface | USB 2.0 / USB 3.0 |
| Lens Mount | C-mount |
| Cooling | Air-cooled to −0 °C (CCD/sCMOS), TE-cooled to −80 °C (EMCCD), TE3-cooled (InGaAs) |
| Software | Proprietary acquisition & analysis suite with ENVI/Evince/SpecSight export compatibility |
| Optional Onboard Processing | Intel Core i7, 16 GB RAM, 256 GB SSD |