ZOLIX
Filter
Showing 121–150 of 556 results
| Brand | ZOLIX |
|---|---|
| Model | DInAs3800-TE |
| Active Area Diameter | 2 mm |
| Spectral Range | 1–3.8 µm |
| Peak Responsivity | 1.5 A/W @ λₚₑₐₖ |
| Specific Detectivity (D*) | 9.1 × 10¹² cm·Hz¹ᐟ²/W @ λₚₑₐₖ, 1 kHz |
| Noise-Equivalent Power (NEP) | 4.4 pW/Hz¹ᐟ² @ λₚₑₐₖ, 1 kHz |
| Operating Temperature | −40 °C |
| Temperature Stability | ±0.5 °C |
| Output Mode | Current (Positive Polarity) |
| Required Temperature Controller | ZTC (Two-Stage TE Cooler, Fixed Cooling Power) |
| Recommended Preamp | ZAMP |
| Integrated Amplification Compatibility | DCS300PA Data Acquisition System (Dual-Channel, Built-in I-V Conversion) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Origin | Domestic (China) |
| Model | DInGaAs1650 / DInGaAs1700-R03M / DInGaAs2600-R03M |
| Pricing | Upon Request |
| Active Area Diameter | 3 mm |
| Spectral Range | 800–1700 nm (DInGaAs1650 & DInGaAs1700-R03M), 800–2600 nm (DInGaAs2600-R03M) |
| Peak Responsivity | ≥0.85 A/W (DInGaAs1650), ≥0.9 A/W (DInGaAs1700-R03M), ≥1.1 A/W (DInGaAs2600-R03M) |
| Max Dark Current | 200 nA (DInGaAs1650), 100 nA (DInGaAs1700-R03M), 1 mA (DInGaAs2600-R03M) |
| Typical D* | 2.3×10¹² cm·Hz¹ᐟ²/W (DInGaAs1650), 4.1×10¹⁰ cm·Hz¹ᐟ²/W (DInGaAs1700-R03M), — (DInGaAs2600-R03M) |
| Typical NEP | 1.2×10⁻¹³ W/Hz¹ᐟ² (DInGaAs1650), 6.5×10⁻¹² W/Hz¹ᐟ² (DInGaAs1700-R03M) |
| Shunt Resistance | 1 MΩ (DInGaAs1650), 1.5 MΩ (DInGaAs1700-R03M), 320 Ω (DInGaAs2600-R03M) |
| Capacitance | 1500 pF (DInGaAs1650), 800 pF (DInGaAs1700-R03M), 9000 pF (DInGaAs2600-R03M) |
| Rise Time | 160 ns (DInGaAs1650), 100 ns (DInGaAs1700-R03M), 1 μs (DInGaAs2600-R03M) |
| Output Mode | Photocurrent (unamplified, positive polarity) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Line | DInGaAs-TE Series |
| Cooling Method | Thermoelectric (TE) Staged Cooling |
| Spectral Range | 800–1700 nm / 800–2600 nm (model-dependent) |
| Active Area Diameter | 3 mm |
| Peak Responsivity | 0.9–1.3 A/W |
| Typical D* | 4.5×10¹¹–8.4×10¹³ cm·Hz½/W |
| Typical NEP | 3.2×10⁻¹⁵–6.0×10⁻¹³ W/Hz½ |
| Operating Detector Temperature | –20 °C to –40 °C |
| Temperature Stability | ±0.5 °C |
| Ambient Operating Temperature | +10 °C to +40 °C |
| Output Mode | Current (positive polarity) |
| Compatible Preamp Models | ZPA-7, ZPA-7P, ZAMP |
| Required Temperature Controller | ZTC or ZTC-H (model-specific) |
| Brand | ZOLIX |
|---|---|
| Model | DInSb5-De02 / DInSb5-HS |
| Origin | Beijing, China |
| Manufacturer | ZOLIX Photonics Inc. |
| Cooling Method | Liquid Nitrogen (77 K) |
| Spectral Range | 1–5.5 µm |
| Photosensitive Area Options | Ø1 mm, Ø2 mm (standard for DInSb5-De02), 1×1 mm² (square, DInSb5-HS), Ø4 mm, Ø7 mm |
| Peak Detectivity (D*, 1 kHz) | 1 × 10¹¹ cm·Hz¹ᐟ²/W |
| NEP (@λ� | ₑₐₖ, 1 kHz): 1.6 pW/Hz¹ᐟ² |
| Dark Current (77 K) | ≤30 µA |
| Response Time (DInSb5-HS) | <25 ns |
| Integrated Preamplifier (DInSb5-HS) | Yes, 20 MHz bandwidth |
| Output Signal Polarity | Positive (P) |
| Housing | DEC-Series Dewar Detector Chamber (DEC-M204 for DInSb5-De02 |
| Compliance | Designed for integration with ISO/IEC 17025-compliant spectroscopic systems |
| Brand | ZOLIX |
|---|---|
| Model | DMCT12-De01 |
| Detector Type | Liquid-nitrogen-cooled HgCdTe photovoltaic detector |
| Spectral Range | 2–12 µm |
| Active Area | 1 × 1 mm² |
| Peak Responsivity | 3 × 10³ V/W @ λₚₑₐₖ |
| Response Time | <25 ns |
| Detectivity (D*) | ≥3 × 10¹⁰ cm·Hz¹ᐟ²/W |
| Output Polarity | Positive (P) |
| Output Mode | Voltage |
| Cooling Requirement | Liquid nitrogen (LN₂), user-supplied |
| Housing | DEC-12 dewar assembly for spectrometer slit coupling |
| Amplification | External preamplifier required (e.g., ZPA-101 or ZPA-300) |
| Compliance | Designed for integration with FTIR, dispersive IR spectrometers, and time-resolved IR systems operating under GLP/GMP-aligned laboratory conditions |
| Brand | ZOLIX |
|---|---|
| Model | DPe Series |
| Type | Room-Temperature Pyroelectric Detector |
| Origin | Beijing, China |
| Manufacturer | ZOLIX (Producer) |
| Spectral Range | 2–16 µm (DPe16) / 2–22 µm (DPe22) |
| Active Area | 1.65 × 1.65 mm² |
| Photosensitive Diameter | 3.7 mm |
| Window Material Options | A4 (for DPe16), A3 (for DPe22) |
| Responsivity | 2.75 × 10⁵ V/W (typ., 10 Hz, 500 K blackbody) |
| Detectivity (D*) | 4.32 × 10⁸ cm·Hz¹ᐟ²/W (typ., 10 Hz, 1 Hz bandwidth) |
| NEP | 3.82 × 10⁻¹⁰ W/Hz¹ᐟ² (typ.) |
| Feedback Resistance | 10 GΩ |
| Feedback Capacitance | 200 ± 50 fF |
| Operating Voltage | ±2.2 to ±8 V |
| Operating Temperature | –10 to +50 °C |
| Output Polarity | Positive (P) |
| Required Signal Conditioning | Lock-in amplifier (e.g., DCS500PA recommended) |
| Optimal Modulation Frequency | ~10 Hz |
| Output Mode | Voltage |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | DPE12 |
| Price | USD 2,100 (FOB Beijing) |
| Operating Temperature Range | −20 °C to +55 °C |
| Spectral Range | 1.5–12 µm |
| Active Area | 2 mm × 2 mm |
| Responsivity | ≥80,000 V/W (at 10 Hz, λ = 10.6 µm) |
| Detectivity (D*) | ≥3 × 10⁸ cm·√Hz/W (at 10 Hz, λ = 10.6 µm) |
| Shunt Resistance (R<sub>d</sub>) | 0.1–0.3 MΩ |
| Recommended Modulation Frequency | 10 Hz |
| Frequency Response Bandwidth | 5–100 Hz |
| Output Signal Type | Voltage |
| Bias Voltage | 3 V DC |
| Rise Time | <100 ms (typ.) |
| Brand | ZOLIX |
|---|---|
| Model | DPe22 |
| Detector Type | Room-Temperature Pyroelectric Detector |
| Spectral Range | 500 nm – 22 µm |
| Active Area | 0.5 mm × 2 mm |
| Window Material | ZnSe (standard) |
| Responsivity @ 500 Hz, 12.5 µm | 2×10⁵ V/W |
| Specific Detectivity D* @ 500 Hz, 12.5 µm | 1×10⁹ cm·Hz¹ᐟ²/W |
| NEP @ 500 Hz, 12.5 µm | 9×10⁻¹¹ W/Hz¹ᐟ² |
| Max. Incident Power | 1 µW |
| Max. Output Voltage | 4 V |
| Output Mode | Voltage |
| Polarity | Positive (P) |
| Recommended Modulation Frequency | ~70 Hz |
| Pre-amplifier Integrated | Yes |
| Sensing Element | LATGS Crystal |
| Structural Design | Thermocouple-inspired architecture |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | DRR |
| Price | USD 3,950 (FOB Beijing) |
| Brand | ZOLIX |
|---|---|
| Model | DSi Series |
| Type | Silicon Photodiode Detector (Room-Temperature, Current-Output) |
| Spectral Range | DSi200: 200–1100 nm (UV-enhanced) |
| DSi300 | 350–1100 nm (Blue-enhanced) |
| Active Area | 100 mm² (Φ11.28 mm) |
| Peak Responsivity | DSi200: 0.52 A/W @ 820 nm |
| DSi300 | ≥0.55 A/W @ 970 nm |
| UV Responsivity | DSi200: ≥0.09 A/W @ 254 nm |
| DSi300 | ≥0.15 A/W @ 410 nm |
| Rise Time | 5.9 µs |
| Operating Temperature | −10 to +60 °C |
| Storage Temperature | −20 to +70 °C |
| Shunt Resistance | DSi200: >5 MΩ |
| DSi300 | >10 MΩ |
| NEP | DSi200: 4.5×10⁻¹³ W/√Hz |
| DSi300 | 2.0×10⁻¹³ W/√Hz |
| Max. Bias-Free Current | DSi200: 0.11 mA |
| DSi300 | 0.0 mA |
| Junction Capacitance @ 0 V | DSi200: 4500 pF |
| DSi300 | 8800 pF |
| Output Polarity | Positive (P-type anode) |
| Output Mode | Photocurrent (unamplified, high-impedance current source) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | DSR100 |
| Pricing | Upon Request |
| Wavelength Range | 200–2500 nm (UV-VIS-NIR) / 1–14 µm (MIR-FIR) |
| Beam Type | Uniform Collimated or Focused |
| Beam Diameter | Ø2–20 mm (collimated), Ø0.3–3 mm (focused) |
| Light Source | Deuterium + Tungsten-Halogen (UV-A/VIS-NIR) / Tungsten-Halogen + SiC (MIR-FIR) |
| Intensity Stability | ≤0.8% (UV-A/VIS-NIR), ≤2% (MIR-FIR) |
| Monochromator | Triple-Grating, Resolution: <0.1 nm @ 435.8 nm (1200 g/mm grating), <2.5 nm @ 2615 nm (75 g/mm grating) |
| Scan Step | Down to 0.005 nm |
| Output Bandwidth | <5 nm (UV-VIS-NIR), <10 nm (MIR-FIR) |
| Stray Light Suppression | Motorized Filter Wheel with Order-Sorting Filters |
| Modulation Frequency | 4–400 Hz |
| Detection | Lock-in Amplifier (2 nV sensitivity, 100 dB dynamic range) |
| Reference Detectors | NIST-traceable Si photodiode (200–1100 nm), Pyroelectric detector (1–14 µm) |
| Repeatability | ≤±1.5% (UV-VIS-NIR), ≤±5% (MIR-FIR) |
| Optical Center Height | 305 mm |
| System Dimensions | 1500 × 1200 × 560 mm |
| Control Enclosure | Standard 4U rack-mount cabinet with embedded industrial PC |
| Brand | ZOLIX |
|---|---|
| Model | DSR300 Series |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Automation Level | Semi-Automatic |
| Effective Test Area | > Ø40 µm |
| Current Measurement Resolution | 10 pA |
| Light Spot Size | 40 µm (diffraction-limited) |
| Compatible Light Sources | Supercontinuum White-Light Laser, Picosecond Pulsed Lasers, Semiconductor Lasers, Halogen Lamps, Xenon Arc Lamps |
| Key Measurement Functions | Spectral Responsivity (A/W), Monochromatic & Power-Variable I–V, Irradiance-Dependent I–t (200 ms resolution), Bias-Dependent I–t, LBIC Mapping, Linearity Analysis, Response Speed (Transient Photovoltage/Photocurrent) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Country of Origin | China |
| Model | DSR300-DUV |
| Pricing | Upon Request |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | DSR500-LBIC |
| Laser Wavelength (Standard) | 532 nm |
| Laser Power Stability | ≤1% over 4 h |
| Maximum Scan Range (20× objective) | 260 × 200 µm |
| Positional Repeatability | <1 µm |
| Minimum Step Size | 0.2 µm |
| Laser Spot Size | ~2 µm |
| Microscope Objective | Olympus 20×, WD = 7.5 mm, VIS range (350–750 nm) |
| Current Measurement | Keithley 2450 SourceMeter®, Range: 1 nA – 1 A, Noise Floor: 50 pA, Resolution: 20 fA, Accuracy: 0.03% |
| Probe Stage | 65 mm vacuum chuck, XYZ probe motion (12 mm travel, 0.7 µm resolution), sample XY translation (25 mm travel, 5 µm resolution) |
| Software Functions | LBIC mapping, I-V curve point-by-point acquisition, region-of-interest selection, thresholding, contour/3D visualization, spectral responsivity (optional, 200–2500 nm), EQE calculation, data export (TXT/Excel) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Origin Category | Domestic (China) |
| Model | DSR600 |
| Pricing | Upon Request |
| Spectral Range | 200–2400 nm (configurable per variant) |
| Calibration Method | Substitution Method (NIM-traceable) |
| Optical Design | All-reflective, dual off-axis parabolic beam path |
| Spot Size | 1 mm (uniform across spectrum) |
| Measurement Capabilities | Spectral Responsivity (R(λ)), Bias-dependent R(λ), External Quantum Efficiency (EQE), Internal Quantum Efficiency (IQE), Reflectance/Transmittance, Short-Circuit Current Density (J<sub>sc</sub>), I–V Characterization |
| Light Sources | 150 W Xe lamp, 250 W Tungsten-Halogen lamp, EQ-99XFC broadband source |
| Detection | Lock-in amplifier (Stanford Research Systems SR240/SR830 compatible) |
| Imaging Aid | Integrated CCD-based monitoring optical path for real-time beam visualization and sample alignment |
| Brand | ZOLIX |
|---|---|
| Model | DSR600-PDE |
| Origin | Beijing, China |
| Manufacturer Type | Manufacturer |
| Product Category | Domestic |
| Quotation | Upon Request |
| Spectral Range (Source + Monochromator) | 300–1100 nm (extendable to 2500 nm) |
| Standard Detector Options | Si (300–1100 nm), InGaAs (900–1700 nm or 2500 nm), NIST-traceable calibration certificates provided |
| Data Acquisition | 2/4-channel, time resolution selectable down to 400 ps, sampling rate up to 2.5 GS/s, record length 10 M points, input impedance 1 MΩ / 50 Ω |
| Precision Source Measure Unit (SMU) | current range 10 nA–1 A, resolution 100 fA, voltage source 0–200 V |
| Programmable Dual-Channel Power Supply | 0–32 V, 1 mV resolution |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | DSR800 |
| Instrument Class | Laser Flash Photolysis System |
| Spectral Range | Configurable (300–1700 nm with optional extensions) |
| Spectral Resolution | Dependent on monochromator & detector selection |
| Temporal Resolution | Down to 400 ps (selectable: 4 ns / 2 ns / 1.14 ns / 800 ps / 400 ps) |
| Light Sources | Nanosecond pulsed lasers (375–1310 nm), semiconductor lasers (266–2200 nm), high-stability programmable LED (flash response ≤100 ns |
| Microscopy Module | Four objective mounting ports |
| Sample Stage | Motorized XYZ translation stage |
| Data Acquisition | 2 or 4 channels |
| input impedance | 1 MΩ / 50 Ω |
| Measurement Modes | Steady-state I–V, transient photovoltage (TPV), transient photocurrent (TPC), open-circuit voltage decay (OCVD), time-resolved charge extraction (TRCE), electrically modulated TPV/TPC, user-defined protocols |
| IPCE Extension | 300–1100 nm standard |
| Brand | ZOLIX |
|---|---|
| Model | DSR900 |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Compliance | EMVA 1288:2020 & GB/T 17444–2013 |
| Light Source Spectral Range | 200–2500 nm |
| Monochromator Resolution | 0.08 nm @ 1200 grooves/mm grating |
| Integrating Sphere Diameter (Monochrome) | 200 mm, Reflectivity >95% (F4 coating, 250–2500 nm) |
| White-light Integrating Sphere | Up to 1100 mm diameter, Output Port ≥100 mm, Uniformity ≤1% (Ø100 mm), Stability ≤1% (30 min) |
| Darkroom Suppression Ratio | >10⁴ (80 dB) across 300–1700 nm |
| Darkroom Dimensions | ≥2000 × 1500 × 1450 mm |
| Motion Control | Motorized XYZ stage (X >100 mm, Z = 100 mm) |
| Data Interface | RS422, LVDS, Camera Link, USB |
| Acquisition Rate | 30 Hz |
| Uncertainty (k=2) | U<sub>rel</sub> = (0.9–4.0)% (800–2500 nm), (1.1–0.9)% (400–800 nm), (2.1–1.1)% (250–400 nm) |
| Brand | ZOLIX |
|---|---|
| Model | DVIA |
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Platform Construction | Triple-layer honeycomb core with inertial six-degree-of-freedom (6-DOF) active feedback control |
| Active Isolation Band | 0.5–10 Hz (≥90% transmissibility reduction) |
| Natural Frequency Range | 0.5–100 Hz |
| Top Surface | 4.0 mm thick 430-series high-permeability nickel-chromium stainless steel |
| Base Plate | 4.0 mm carbon steel with black oxide finish |
| Side Walls | 2.0 mm carbon steel encapsulated with high-damping polyethylene |
| Honeycomb Core | Steel-based, 0.25 mm wall thickness, 3.2 cm² cell area |
| Surface Flatness | ±0.1 mm over 600 mm² |
| Mounting Pattern | M6 threaded holes on 25 mm × 25 mm grid (imperial options available), edge margin 37.5 mm |
| Threaded Hole Sealing | Cylindrical isolation cup beneath each M6 thread for contamination control |
| Damping Mechanism | Broadband passive damping integrated with real-time active compensation |
| Brand | ZOLIX |
|---|---|
| Model | DVID-C Series |
| Origin | South Korea |
| Manufacturer | ZOLIX (OEM Production) |
| Type | Pneumatic Air-Damped Optical Isolation Table |
| Construction | 304 Stainless Steel Frame & Top Plate |
| Operating Medium | Compressed Air (3–5 kg/cm²) or Liquid Nitrogen |
| Natural Frequency | 1.2–2.0 Hz |
| Isolation Efficiency | 75–95% @ 10 Hz, 85–98% @ 20 Hz |
| Horizontal Repeatability | ±0.1 mm |
| Static Load Capacity | 500 kg |
| Mass | 150–250 kg |
| Damping Mechanism | Orifice-Type Pneumatic Damping |
| Cleanroom Compatibility | ISO Class 1 (Fed. Std. 209E Class 1) |
| Surface Finish | Electropolished Weld Seam-Free Top Plate with Perforated Upper Deck |
| Brand | ZOLIX |
|---|---|
| Origin | South Korea |
| Manufacturer Type | OEM Manufacturer |
| Origin Category | Imported |
| Model | DVID-H Series |
| Vibration Isolation Natural Frequency | 1.2–1.5 Hz |
| Damping Mechanism | Orifice-Type Pneumatic Damping |
| Leveling System | 3-Axis Automatic Air-Leveling Valves |
| Leveling Repeatability | ±0.1 mm (static), ±1.2 mm (dynamic) |
| Static Load Capacity | 300–800 kg |
| Operating Air Supply | 3–5 kgf/cm² Compressed Air or Nitrogen |
| Top Plate Construction | 3-Layer Honeycomb Sandwich |
| Core Material | Reinforced Steel Foil Honeycomb (0.25 mm thickness, 3.2 cm² cell area) |
| Top Skin | 4.0 mm 430-Series Magnetic Stainless Steel, Sandblasted Finish |
| Bottom Skin | 4.0 mm Carbon Steel, Oxidized Surface |
| Surface Flatness | ±0.1 mm per 600 mm × 600 mm |
| Threaded Mounting Holes | M6 @ 25 mm Grid (Metric), 1/4"-20 @ 1" Grid (Imperial) |
| Edge Offset | 37.5 mm (Metric), 1.5" (Imperial) |
| Optional Top Plate Thickness | 50 mm or 100 mm |
| Mounting Pattern | Standard Optical Breadboard Layout |
| Brand | ZOLIX |
|---|---|
| Model | DVID-L Series |
| Type | Active Pneumatic Vibration Isolation Platform |
| Origin | South Korea |
| Manufacturer | ZOLIX (Producer) |
| Natural Frequency | 1.2–2.0 Hz |
| Vibration Isolation Efficiency | 75–95% @ 10 Hz, 85–98% @ 20 Hz |
| Horizontal Re-centering Accuracy | ±0.05 mm |
| Static Load Capacity | 500 kg |
| Platform Weight | 150–250 kg |
| Top Surface Material | Polished Melamine Laminate + Precision Ground Steel Plate |
| Frame Material | Sandblasted Structural Steel Tubing |
| Operating Air Supply | 3–5 kg/cm² Compressed Air or Liquid Nitrogen |
| Compliance | Designed for ISO 20486 Class 2 and SEMI S2-0213 compatible environments |
| Brand | ZOLIX |
|---|---|
| Origin | Korea |
| Manufacturer | DAEIL Co., Ltd. |
| Type | Imported Optical Platform Surface |
| Model | DVIO-B Series |
| Structure | Triple-layer sandwich with steel honeycomb core |
| Top Plate | 4.0 mm thick ASTM A240 430 stainless steel (low thermal expansion, high magnetic permeability) |
| Base Plate | 4.0 mm thick carbon steel, black oxide finish |
| Side Walls | 2.0 mm carbon steel clad with high-damping polyethylene |
| Thickness Options | 50 / 100 / 200 / 300 mm |
| Surface Flatness | ±0.1 mm over 600 mm × 600 mm |
| Hole Pattern | M6 threaded holes on 25 mm × 25 mm grid (imperial 1" grid optional) |
| Edge Margin | 37.5 mm from outermost hole to platform edge |
| Isolation Cups | Individual cylindrical sealing cups beneath each M6 thread |
| Honeycomb Core | 0.25 mm gauge steel, cell area 3.2 cm² |
| Weight Density | 87 kg/m² (50 mm), 122 kg/m² (100 mm), 139 kg/m² (200 mm), 165 kg/m² (300 mm) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Category | Domestic |
| Model | EC-TERS |
| Pricing | Upon Request |
| Instrument Type | Confocal Micro-Raman Spectrometer |
| Spectral Resolution | <2 cm⁻¹ |
| Spatial Resolution | <1 µm (XY) |
| Excitation Sources | 532 nm (100 mW), 633 nm (>15 mW) |
| Spectrograph Focal Length | 320 mm with Triple Grating Turret |
| Detector | ≥2000×256 pixels, 300–1000 nm spectral range, >90% peak QE, deep-cooled to −60 °C |
| Brand | ZOLIX |
|---|---|
| Model | EMC Series |
| Material | 6061-T6 Aluminum Alloy |
| Surface Finish | Sandblasted Black Anodized |
| Optical Element Mounting | POM-tipped Set Screws |
| Mounting Hole Pattern | Dual M4 Tapped Holes |
| Adjustment Axes | Pitch & Yaw |
| Angular Range | ±4° per Axis |
| Resolution | 0.75°/rev, 0.38°/rev, or 0.25°/rev (model-dependent) |
| Locking Mechanism | Brass Nut Locking |
| Return Spring | Dual Stainless Steel Tension Springs |
| Optical Center Height | 18 mm / 31.8 mm / 47 mm (model-dependent) |
| Minimum Optic Thickness | 3 mm |
| Alignment Design | Optical Center Coaxial with Mount Base Plane |
| Compliance | Designed for ISO-standard optical breadboard integration (M4 pitch, 25 mm grid) |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Line | EMHS Series |
| Material Options | 6061-T6 & 7075-T6 Aluminum Alloys |
| Adjustment Axes | 2-Axis (Pitch/Yaw) or 3-Axis (Pitch/Yaw + Z-Translation) |
| Angular Resolution | 0.78°/rev, 0.39°/rev, or 0.24°/rev |
| Max Angular Range | ±3.5° or ±4° (Pitch/Yaw) |
| Z-Axis Travel | ±2 mm to ±3.2 mm |
| Mounting Hole Pattern | M4 threaded or countersunk holes (2×) |
| Included Accessories | SM05/SM1/M30 retaining rings, M4 cap screws, reset springs (4×), 2 mm hex key compatibility |
| Brand | ZOLIX |
|---|---|
| Model | EMLH-Z Series |
| Material | 6061-T6 Aluminum Alloy |
| Surface Finish | Black Anodized |
| Adjustment Axes | 2-Axis (Pitch/Yaw) or 3-Axis (Pitch/Yaw + Z-Translation) |
| Angular Range | ±4° (Pitch & Yaw) |
| Angular Resolution | 0.39° per Revolution |
| Z-Axis Travel | ±3.25 mm (3-Axis Models Only) |
| Clamping Height Max | 32 mm |
| Rubber Pad Dimensions | 6.7 mm × 18.5 mm |
| Mounting Hole Pattern | Dual M4 Counterbore + Dual M6 Threaded Holes (Co-located) |
| Adjustment Screw | M6×0.25, 2 or 3 pcs |
| Included Hardware | M4 Socket Head Cap Screw (1 pc), M3 Threaded Rod Mount (Ø6 mm, extendable), Dual Reset Tension Springs |
| Compatibility | Left-Handed or Right-Handed Configuration |
| Brand | ZOLIX |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | OEM Manufacturer |
| Product Line | EMR Series |
| Material | 6061-T6 Aluminum Alloy |
| Surface Finish | Sandblasted Black Anodized |
| Adjustment Axes | 2-Axis (Pitch/Yaw) or 3-Axis (Pitch/Yaw + Z-Translation) |
| Mounting Compatibility | Rectangular/Square Optics (12.7 mm, 25.4 mm, 50.8 mm height) |
| Angular Range | ±4° (Pitch & Yaw) |
| Z-Axis Travel | 0–3.2 mm (model-dependent) |
| Adjustment Resolution | 0.25°/rev, 0.39°/rev, or 0.78°/rev |
| Locking Mechanism | Lever Lock (2-axis models) |
| Fixation Method | Top-Access Set-Screw Clamping |
| Minimum Optic Thickness | 3–4 mm |
| Mounting Holes | Dual M4 Threaded or Counterbored Holes |
| Included Hardware | M4 Set Screws or Socket Head Cap Screws (1 per unit) |
| Return Springs | 2 or 4 stainless steel tension springs |
| Hex Drive | 2 mm Allen Key Interface |
| Brand | ZOLIX |
|---|---|
| Model | Faraday Series |
| Sensor Probe Types | Flat (FLT), Cylindrical (CYL), Stud (SCR) |
| Measurable Gap Range | 0.2–3 mm |
| Resolution | ≤0.32 nm RMS |
| Linearity Error | <0.01% FSO (laser interferometer calibrated) |
| Analog Bandwidth Options | 20 Hz / 1 kHz / 10 kHz |
| Digital Sampling Rate | 50 kSa/s per channel (up to 8 channels parallel) |
| Output Voltage Options | 0–10 V (default), ±5 V, ±10 V |
| Zero Offset | Adjustable as % of full scale |
| Temperature Drift | 20 ppm/°C |
| Communication Interfaces | Gigabit Ethernet, SPI (20 µs update interval) |
| Vacuum Compatibility | HV, UHV, and Non-Magnetic (NM) variants available |
| Enclosure Options | Faraday.03 (max 3 channels), Faraday.08 (max 8 channels) |
| OEM Customization | Supported for probes, signal conditioning, and board-level integration |
| Brand | ZOLIX |
|---|---|
| Model | FC Series |
| Type | Multi-Channel Gated Intensified Framing Camera |
| Channel Count | 2 / 4 / 8 |
| Spatial Resolution | >30 lp/mm |
| Spectral Response | 350–850 nm |
| Gating Width | 3 ns to DC |
| Gating & Delay Precision | 1 ns |
| Delay Range | 0–10 s |
| Intrinsic Trigger Latency | <120 ns |
| Image Intensifier Cathode Diameter | 18 mm |
| Max Intensifier Gain | 1×10⁴ |
| Sensor | 2048×2048 sCMOS, 6.5 µm pixel pitch, 13.3×13.3 mm active area |
| ADC Depth | 16-bit |
| Software | Integrated Acquisition & Synchronization Suite |