Capacitance Moisture Analyzer
Filter
Showing all 7 results
| Brand | AA OPTO Electronic |
|---|---|
| Origin | Japan |
| Model | PM-888-X (Upgraded successor to PM-8188-A) |
| Measurement Principle | Radio-frequency capacitance |
| Accuracy | ±0.5% w/w (within specified moisture ranges) |
| Sample Handling | Auto-feed hopper (for grains) or cup loading (for seeds, beans, tea, spices) |
| Moisture Range Coverage | 0–45% w/w, segmented by pre-programmed material-specific calibration curves |
| Brand | Bigdipper |
|---|---|
| Origin | Beijing, China |
| Manufacturer | Bigdipper Instruments Co., Ltd. |
| Model | T-BD5 MS1204p |
| Measurement Principle | Microwave attenuation (MS1204 sensor technology) |
| Operating Temperature | 100–350 °C |
| Pressure Rating | 1.6–4.0 MPa |
| Water Content Range | 0.02–101% w/w |
| Resolution | 0.02–0.1% |
| Repeatability | ±0.05% to ±1.0% FS |
| Output | 4–20 mA analog, RS232/RS485, Modbus RTU, IEEE 1451.2 STIM |
| Enclosure Rating | NEMA 7/8/9 |
| Intrinsic Safety | Ex ia IICT6 |
| Flameproof Protection | Ex d ia IIC T5 |
| Wetted Materials | 1Cr18Ni9Ti stainless steel, polyimide |
| Installation Options | Threaded (ZG1", NPT), flanged, clamp-type, bypass |
| Flow Orientation | Counter-flow (frontal insertion) |
| Sensor Geometry | Insertion-type probe with optimized electromagnetic field distribution |
| Compliance | ASTM D4006, ISO 9001, GB/T 11141-2014, ATEX Directive 2014/34/EU (via third-party certification), IEC 60079-0/-11/-14, FDA 21 CFR Part 11 (data integrity support via audit trail in BD5xCMD firmware) |
| Brand | Brookfield |
|---|---|
| Origin | USA |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | Computrac Vapor Pro XL |
| Application | Multi-purpose moisture analyzer |
| Moisture Range | 10 ppm to 100% |
| Resolution | 0.1 ppm |
| Repeatability | ≤10% C.V. (for samples >0.1% moisture), ≤15% C.V. (for samples <0.1% moisture) |
| Temperature Range | 25–300°C |
| Sample Weight | 0.01–8 g |
| Display Units | %, ppm, µg |
| Storage Capacity | 250 methods, 1000 results, 100 moisture curves |
| End Criteria | Predictive, Rate, Time, Time-Rate |
| Calibration | NIST-traceable capillary |
| Power | 100–120 V~ / 220–240 V~, 50/60 Hz |
| Dimensions | 17.2 × 47 × 27.9 cm |
| Weight | 8.0 kg |
| Certifications | UL, CE |
| Compliance Options | 21 CFR Part 11 (optional), ASTM D7191-10, ASTM D7546-15 |
| Brand | GBPI |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | China |
| Model | W202-1 |
| Application | Multi-purpose WVTR analyzer for films, sheets, and packaging containers |
| Test Range | 0.001–100 g/(m²·24h) |
| Test Resolution | 0.001 g/(m²·24h) |
| Temperature Control Range | 15–45°C (optional 5–55°C) |
| Temperature Control Accuracy | ±0.1°C |
| Humidity Control Range | 0%RH, 30–95%RH |
| Humidity Control Accuracy | ±1%RH |
| Test Area | 50.24 cm² |
| Specimen Diameter | Φ100 mm |
| Max Specimen Thickness | ≤2 mm |
| Sample Capacity | 2 chambers (independent operation) |
| Carrier Gas | ≥99.999% N₂, pressure ≥0.1 MPa, flow rate 5–100 mL/min |
| Gas Inlet | 1/8″ stainless steel tubing |
| Dimensions | 700 × 585 × 485 mm |
| Weight | 80 kg |
| Power | 750 W, AC 220 V / 50 Hz |
| Compliance | GB/T 21529-2008, YBB 00092003-2015, BS EN ISO 15106-3:2005, ASTM E398-2013, DIN 53122-2 |
| Brand | KPM Sensortech |
|---|---|
| Origin | USA |
| Model | PMT-330 |
| Type | Capacitance-Based RF Moisture Analyzer |
| Application | Non-Destructive In-Line and Spot Measurement in Lumber, Plywood, Particleboard, Corrugated Paperboard, and Gypsum Wallboard |
| Compliance | Meets ASTM D4442 (Wood), ISO 8781-3 (Paper & Board), and ASTM C117 (Gypsum) moisture test method principles |
| Brand | Red Sun Instrument |
|---|---|
| Origin | Hebei, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HRDZT-380 |
| Application | Wood Moisture & Insulation Resistance Testing |
| Resistance Range | 10² Ω to 10¹⁶ Ω (extendable to 10²⁰ Ω via current extrapolation) |
| Resistivity Range | up to 10²² Ω·cm |
| Voltage Accuracy | ±0.5% ±1 V |
| Measurement Speed | Fast mode — 5 readings/sec |
| Display | 4.3″ high-resolution TFT LCD |
| Interface | Banana jacks, BNC connectors |
| Compliance Reference | GB/T 10580–2003, IEC 60260, ASTM D257, ISO 3915 |
| Brand | ZRTB |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZB-305A |
| Maximum Capacity | 120 g |
| Readability | 0.001 g |
| Moisture Resolution | 0.01% |
| Heating Source | Halogen Lamp (Room Temp–180 °C, 1 °C Increments) |
| Drying Modes | Standard / Rapid / Gentle |
| Termination Modes | Auto-Stop / Timed Stop / Manual Stop |
| Weighing Sensor | HBM (Germany) |
| Processor | ARM (UK) |
| Calibration Weight | 100 g |
| Pan Diameter | φ110 mm |
| Interface | RS232 |
| Dimensions (L×W×H) | 330 × 205 × 165 mm |
| Application | Multi-industry moisture determination in plastics, polymers, pharmaceuticals, food, and chemicals |