- All
- Favorite
- Popular
- Most rated
| Brand | Ceyear |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Line | 3672A (10 MHz–13.5 GHz), 3672B (10 MHz–26.5 GHz), 3672C (10 MHz–43.5 GHz), 3672D (10 MHz–50 GHz), 3672E (10 MHz–67 GHz) |
| Calibration Methods | Frequency Response, One-Port, Response-Isolation, Enhanced Response, Full Two-Port SOLT, TRL, Electronic Calibration (ECal) |
| Display Formats | Log Magnitude, Linear Magnitude, VSWR, Phase, Group Delay, Smith Chart, Polar Plot |
| Interfaces | USB 2.0/3.0, LAN (10/100/1000BASE-T), GPIB (IEEE-488.2), VGA |
| Operating System | Embedded Windows Platform |
| Dynamic Range | >130 dB (typ. at 10 GHz, depending on model and IF bandwidth) |
| Trace Noise | <0.005 dBrms (1 kHz IFBW, 3672B typical) |
| Channel Capacity | Up to 64 measurement channels |
| Window Capacity | Up to 32 simultaneous display windows, 16 traces per window |
| Optional Features | Pulse S-parameter Measurement, Mixer/Converter Characterization, Gain Compression (Pout vs. Pin & Freq), Time-Domain Reflectometry (TDR), Advanced Time-Domain Analysis (ATDA), Fixture De-embedding (Single-ended & Differential), Virtual Eye Diagram Generation (with PRBS emulation), Jitter/Noise Injection, Pre-emphasis & Equalization Simulation |
| Brand | Ceyear |
|---|---|
| Origin | China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Model | 5201 |
| Supported Data Rates | 1 Gbps, 10 Gbps, 25 Gbps, 40 Gbps, 50 Gbps, 100 Gbps |
| Max Port Density | 80 × 100G ports (across 4 slots) |
| Layer Coverage | L2–L3 |
| Compliance | RFC 2544, RFC 2889, RFC 3918 |
| Synchronization | Precision PTP/IEEE 1588 v2 and SyncE support |
| Scalability | Multi-chassis clustering with deterministic latency synchronization |
| Software Architecture | Modular test application framework with CLI, GUI, and RESTful API interfaces |
| Pricing | Available upon technical evaluation and configuration quote |
| Brand | Ceyear |
|---|---|
| Model | 1466 Series |
| Type | Analog Microwave Signal Generator |
| Frequency Range | 6 kHz to 110 GHz (coaxial, standard) |
| Phase Noise | –132 dBc/Hz @ 10 GHz carrier, 10 kHz offset (typ.) |
| Spurious | < –80 dBc @ 10 GHz carrier |
| Harmonics | < –55 dBc |
| Output Power Range | –150 dBm to +25 dBm (configurable, >170 dB dynamic range) |
| Modulation | AM, FM, ΦM, Pulse (min. pulse width 20 ns), complex pulse modes (dual-pulse, burst, PRI stagger/jitter/ramp) |
| Scan Modes | Stepped, List, Analog (ramp), Power Sweep |
| Touchscreen Interface | 11.6″ HD capacitive display |
| Remote Control | SCPI-compliant, web browser & cross-platform client support, SCPI script recording & auto-generation for C++, C#, Qt, MATLAB, LabVIEW |
| Brand | Ceyear |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Country of Origin | China |
| Model | 3671 Series (3671C: 100 kHz–14 GHz |
| 3671D | 100 kHz–20 GHz |
| 3671E | 100 kHz–26.5 GHz |
| 3671G | 10 MHz–43.5 GHz) |
| Calibration Options | Response, One-Port, Response-Isolation, Enhanced Response, Full Two-Port SOLT, TRL, Electronic Calibration (ECal) |
| Display Formats | Log Magnitude, Linear Magnitude, SWR, Phase, Group Delay, Smith Chart, Polar Plot |
| Interfaces | USB 2.0/3.0, LAN (10/100/1000BASE-T), GPIB (IEEE-488.2), VGA, HDMI |
| Dynamic Range | >120 dB (typ. at 1 GHz, 10 Hz IFBW) |
| Sweep Speed | 43 ms for 201 points across full frequency range (600 kHz IF bandwidth, typical) |
| Software Compliance | Supports ASTM E29, ISO/IEC 17025 traceability workflows, GLP/GMP audit trail logging (via optional secure firmware mode) |
| Optional Modules | Time-Domain Reflectometry (TDR), Advanced Time-Domain Analysis (including virtual eye diagram generation, jitter/noise injection, pre-emphasis/CTLE equalization simulation), Automatic Fixture Removal (AFR) |
| Brand | Ceyear |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Model | 6935DE |
| Pricing | Available Upon Request |
Show next