Combined Temperature Humidity Vibration Test Chamber
Filter
Showing 1–30 of 191 results
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Compliance | GB/T 5170.2–1996, GB/T 2423.1–1989, GB/T 2423.2–1989, GB/T 2423.3–1993, GJB 150.3–1986, GJB 150.4–1986 |
| Brand | ASLI |
|---|---|
| Model | OK-ZTH-408 |
| Temperature Range | -55°C to +150°C |
| Temperature Ramp Rate | 15°C/min |
| Vibration Frequency Range | 1–5000 Hz (with PC-controlled option) |
| Vibration Mode | Vertical, Horizontal, or Combined (Vertical + Horizontal) |
| Max. Load Capacity | 50 kg |
| Effective Table Size | 1.0 m × 1.0 m |
| Peak-to-Peak Amplitude | 25.4 mm |
| Speed Display Resolution | 0.1 RPM |
| Drive Motor Power | 1 HP |
| Power Supply | 220 V, 50 Hz |
| Weight | ~300 kg |
| Compliance | GB/T 2423, IEC 60068-2-6 (FC), JJG 189–1997, GB/T 13309–1991, EN, ANSI, UL, ASTM, ISTA Transport Standards |
| Temperature Range | -20 °C to +130 °C |
|---|---|
| Humidity Range | 40–98% RH |
| Temperature Uniformity | ±2 °C (unloaded) |
| Temperature Fluctuation | ±0.5 °C (unloaded) |
| Humidity Fluctuation | ±2% RH |
| Heating Rate | -20 °C to +120 °C ≤ 60 min |
| Cooling Rate | Ambient to -20 °C ≤ 45 min (unloaded) |
| Vibration Force (Sine) | 2.94 kN (300 kgf) |
| Frequency Range | 5–2000 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Moving Mass | 2.7 kg |
| Payload Capacity | 120 kg |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis) |
| Test Duration Setting | 0–999 h |
| Compliance | GB/T 2423.1, GB/T 2423.3, GB/T 2423.4, IEC 60068-2-1 (Cold), IEC 60068-2-3 (Damp Heat), IEC 60068-2-30 (Cyclic Damp Heat) |
| Key | Temperature Range: −60 °C to +150 °C |
|---|---|
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Ramp Rate | 0.7–1.0 °C/min |
| Time Setting Range | 0–9999 h |
| Refrigeration System | Two-stage cascade mechanical compression |
| Refrigerant | HFC-R404A / HFC-R23 |
| Cooling Method | Water-cooled |
| Control Interface | Color touchscreen + PLC (OYO or TIME) |
| Construction | A3 steel exterior with powder coating |
| Viewing Window | Multi-layer tempered glass with conductive film |
| Cable Port | Ø50 mm (left side) |
| Humidification | Built-in water tank with booster pump |
| Air Circulation | Forced convection via extended-shaft stainless steel centrifugal blower (bottom inlet / top outlet) |
| Sealing | Dual-layer high-tensile high-temp silicone gasket |
| Vibration Integration | Optional electrodynamic or servo-hydraulic shaker system (user-specified) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 30–98 %RH |
| Temp. Uniformity | ≤ ±2.0 °C |
| Temp. Stability | ≤ ±0.5 °C |
| Humidity Stability | +2 / −3 %RH |
| Cooling Rate (no load) | 0.7–1.0 °C/min |
| Heating Rate (no load) | 1.0–3.0 °C/min |
| Refrigeration | Twin-stage cascade system with Tecumseh (France) hermetic piston compressors |
| Refrigerants | R404A / R23 / R14 (ODP-zero, GWP-optimized blend) |
| Expansion Control | Danfoss (Denmark) thermostatic expansion valves + capillary tubes |
| Solenoid Valves | SMC (Italy) |
| Evaporator & Condenser | Stainless-steel finned-tube assemblies, domestically fabricated per ASME BPVC Section VIII compliance |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Internal Chamber Material | SUS304 Stainless Steel |
| External Casing | Cold-Rolled Steel with Electrostatic Powder Coating |
| Insulation | Rigid Polyurethane Foam or Ultra-Fine Glass Wool |
| Sealing | High-Temperature Silicone Gasket |
| Control Method | BTHC (Balanced Temperature & Humidity Control) |
| Controller | Korean-Made 7" Touchscreen HMI with PID Auto-Tuning, 0.1°C/0.1%RH Resolution |
| Heating | Stainless Steel Finned Air Heater |
| Humidification | Shallow-Water Tank Steam Generator |
| Refrigeration | Hermetic Compressor(s), Single-Stage or Cascade Cryogenic Circuit |
| Air Circulation | Custom Aluminum Impeller with AC Inverter Motor |
| Observation Window | Reinforced Double-Layer Low-E Glass with LED Illumination |
| Safety System | Redundant Over-Temp/Over-Humidity/Vibration-Interlock Protection |
| Vibration Interface | Motorized Vertical Lift Platform for Precise Alignment with External Shaker Table |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Compliance | GB/T 2423, GJB 150, IEC 60068 |
| Control Interface | 7″ TFT LCD Touchscreen with RS232/RS485 |
| Refrigeration System | Hermetic Scroll Compressor + Dual-Circuit Cascade Cooling |
| Humidity Range | 20–98% RH (non-condensing) |
| Temperature Range | −70°C to +180°C |
| Vibration Integration | Compatible with Electrodynamic Shakers (5–2000 Hz, 100 kN max force) |
| Chamber Volume Options | 150 L to 1000 L |
| Programmable Profiles | Up to 99 segments, 999 cycles per profile |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Max. Load Capacity | 100 kg |
| Table Size | 500 × 500 mm |
| Stroke Amplitude | 0–5 mm |
| Peak Acceleration | 20 g |
| Frequency Range | 1–400 Hz |
| Sweep Range | 1–400 Hz |
| Waveforms | Sine, Half-Sine |
| Power Supply | 220 V ±10%, 5 A |
| Rated Power | 2.2 kW |
| Control Resolution | 0.01 Hz |
| Time Setting Range | Up to 1 year (1-second increment) |
| Chamber Internal Dimensions (V) | 500 × 500 × 160 mm |
| Compliance | Designed per IEC 60068-2-6, IEC 60068-2-64, MIL-STD-810H, GB/T 2423.10, GB/T 2423.3, GB/T 2423.4 |
| Key | Temperature Range: -20°C to +130°C |
|---|---|
| Humidity Range | 40–98% RH |
| Temperature Uniformity | ±2°C (unloaded) |
| Temperature Stability | ±0.5°C (unloaded) |
| Humidity Stability | ±2% RH |
| Temperature Deviation | ≤±2°C |
| Humidity Deviation | ≤±2°C |
| Heating Rate | -20°C to +120°C ≤60 min |
| Cooling Rate | Ambient to -20°C ≤45 min (unloaded) |
| Time Setting Range | 0–999 h |
| Vibration Frequency Range | 5–2000 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Dynamic Load Capacity | 120 kg |
| Moving Mass | 2.7 kg |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis) |
| Excitation Force | 300 kN (300 kgf) |
| Noise Level | Low |
| Power Efficiency | 60% reduction vs. conventional designs |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,000 (approx.) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70°C to +150°C |
| Humidity Range | 5%–98% RH |
| Temperature Control Accuracy | ±0.5°C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±2.0°C |
| RH Uniformity | ±3.0% RH |
| Temp. Resolution | 0.1°C |
| RH Resolution | 0.1% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Construction | Interior & Exterior SUS#304 Stainless Steel |
| Insulation | High-Density Polyurethane Foam (CFC-Free) |
| Refrigeration | Air-Cooled, Single-Stage Compressor (to –20°C), Two-Stage Compressor (to –70°C) |
| Safety Protections | Fuseless Circuit Breaker, Compressor Overload Protection, Refrigerant HP/LP Cut-off, Over-Temp/Over-Humidity Interlock |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Internal Liner | SUS304 Stainless Steel |
| External Casing | Cold-Rolled Steel with Electrostatic Powder Coating |
| Insulation | Rigid Polyurethane Foam or Ultra-Fine Glass Wool |
| Sealing | High-Performance Silicone Gasket |
| Control Method | BTHC (Balanced Temperature & Humidity Control) |
| Controller | Korean-Made 7" Touchscreen HMI with PID Auto-Tuning, 0.1°C/0.1%RH Accuracy |
| Heating | Stainless Steel Finned Air Heater |
| Humidification | Shallow-Water Pan Steam Generator |
| Refrigeration | Hermetic Compressor, Single-Stage or Cascade Cryogenic Circuit |
| Water Purification System | Integrated Deionized Water Filter |
| Auto-Fill Function | Power-On Water Intake |
| Air Circulation | Custom Aluminum Impeller with AC Motor |
| Observation Window | Reinforced Double-Layer Tempered Glass with LED Illumination |
| Vibration Interface | Motorized Vertical Height Adjustment Mechanism (±150 mm Range) |
| Compliance | GB/T 5170.2–1996, GB/T 5170.5–1996, GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 2423.4–2023, GB/T 2423.22–2023 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Frequency Range | 50 Hz, 1–600 Hz, 1–3000 Hz, 1–5000 Hz |
| Max. Acceleration | <20 g |
| Vibration Amplitude Range | 0–5 mm |
| Payload Capacity | 100 kg |
| Temperature Control Accuracy | ±0.1 °C |
| Temp. Resolution | 0.1 °C |
| Control System | PID + SSR with Auto-Tuning |
| Vibration Waveform | Sine (Half/Full Cycle) |
| Vibration Axes | Vertical (Z) + Horizontal (X/Y) |
| Test Duration Range | 1–65,000 s |
| Cycle Count Range | 1–65,000 cycles |
| Frequency Display Resolution | 0.01 Hz |
| Frequency Precision | 0.1 Hz |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Chamber Dimensions (mm) | Vertical Unit 500 × 500 × 150 |
| Key | Temperature Range: −70 °C to +150 °C |
|---|---|
| Humidity Range | 20–98% RH |
| Temp. Uniformity | ≤ ±2.0 °C |
| Temp. Stability | ≤ ±0.5 °C |
| Humidity Stability | +2/−3% RH |
| Cooling Rate (unloaded) | 0.7–1.0 °C/min |
| Heating Rate (unloaded) | 1.0–3.0 °C/min |
| Vibration Type | Electromagnetic Shaker |
| Frequency Range | 2–500 Hz |
| Displacement Amplitude | 0–5 mm |
| Acceleration Range | 0–20 g |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.3, GB/T 2423.10, GB/T 2423.48, GB/T 2423.49, GB 10586, GB 10589, GB 10592, GB 11158, GB/T 5170.2, GB/T 5170.5 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,000 (approx.) |
| Internal Volume | Customizable per user requirement |
| Temperature Range | −70 °C to +150 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ 2 °C |
| Temperature Deviation | ≤ ±2 °C |
| Humidity Range | 20 %RH to 98 %RH (at +20 °C to +80 °C) |
| Humidity Deviation | ≤ ±3 %RH (≤75 %RH), ≤ ±5 %RH (>75 %RH) |
| Rapid Temperature Range | −55 °C to +85 °C |
| Ramp Rate | 5 °C/min or 10 °C/min (average or linear mode) |
| Refrigeration System | Semi-hermetic Copeland (Germany) compressors |
| Refrigeration Method | Dual-stage mechanical cascade |
| Refrigerants | HFC-R404A / HFC-R23 |
| Condenser | Stainless steel brazed plate heat exchanger |
| Cooler | Finned-tube air cooler |
| Cooling Method | Water-cooled |
| Air Circulation | Wide-band forced convection, bottom-in top-out, extended-shaft stainless steel centrifugal blower |
| Humidification | Integrated water tank with booster pump |
| Control System | Bilingual (English/Chinese) color touchscreen + PLC controller (OYO Japan or TIME Korea) |
| Vibration Subsystem | Optional electrodynamic or servo-hydraulic shaker (user-specified model & capacity) |
| Chamber Construction | Interior – mirror-finish SUS304 stainless steel |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range | RT to +80°C / 0°C to +80°C / −10°C to +80°C |
| Humidity Range | 20–98% RH |
| Temp. Control Accuracy | ±0.5°C |
| RH Control Accuracy | ±2.0% RH |
| Temp. Uniformity | ±2.0°C |
| RH Uniformity | ±3.0% RH |
| Salt Spray Temp. (NSS/ACSS) | 35±1°C |
| CASS Test Temp. | 50±1°C |
| Pressure Tank Temp. (NSS/ACSS) | 47±1°C |
| CASS Pressure Tank Temp. | 63±1°C |
| Salt Solution | 5% NaCl or 5% NaCl + 0.26 g/L CuCl₂·2H₂O |
| Compressed Air Pressure | 1.00±0.01 kgf/cm² |
| Fog Deposition Rate | 1.0–2.0 mL/80 cm²/h (avg. over ≥16 h) |
| Refrigeration System | Hermetic dual-stage compressor with R404A/R23 eco-refrigerants |
| Controller | 7″ color TFT touchscreen, bilingual (EN/CN), RS232 interface |
| Program Capacity | 140 patterns × 1400 steps, max. 99 repeats per segment, full-cycle repeat up to 999× |
| Power Supply | 220V±5% / 50±0.5 Hz or 380V±5% / 50±0.5 Hz AC |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | -40 °C to +150 °C |
| Humidity Range | 20–98% RH |
| Temperature Uniformity | ±0.3 °C |
| Humidity Uniformity | ±2.5% RH |
| Temperature Resolution | 0.1 °C |
| Humidity Resolution | 0.1% RH |
| Internal Dimensions (W×H×D) | 500 × 750 × 600 mm |
| External Dimensions (W×H×D) | 1070 × 1750 × 1100 mm |
| Inner Chamber Material | SUS#304 Stainless Steel |
| Outer Casing Material | SUS#304 High-Tensile Stainless Steel with Multi-Layer Surface Treatment |
| Insulation | High-Density Glass Wool + Rigid Polyurethane Foam |
| Cooling System | Twin-Stage Refrigeration with R404A Refrigerant |
| Heating System | U-Type High-Speed Electric Heaters |
| Humidification System | Stainless Steel Steam Generator with Dual Reed Switch Control |
| Dehumidification Method | ADP (Apparatus Dew Point) Contact Cooling via Evaporator Coil |
| Air Circulation | Multi-Blade Centrifugal Fan with Adjustable Horizontal/Vertical Flow Path |
| Control Interface | TEMI 880 Touchscreen Controller (Bilingual English/Chinese) |
| Compliance | Designed per IEC 60068-2 series, ASTM D4332, ISO 16750-4, and GB/T 2423.1–2423.3 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Vibration Table Size (L×W) | 50×50 cm |
| Max Load Capacity | 100 kg |
| Vibration Direction | Vertical |
| Frequency Range | 1–600 Hz |
| Max Acceleration | 20 g |
| Peak-to-Peak Amplitude Range | 0–5 mm |
| Vibration Waveform | Sinusoidal |
| Power Supply | 220 V ±20%, 10 A |
| Motor Power | 2.2 kW |
| Control Resolution | 0.01 Hz (display), ±0.1 Hz (accuracy) |
| Programmable Modes | Fixed-frequency, Sweep, Step, Logarithmic, Octave, Cyclic Sequencing (15-segment per profile) |
| Optional Accessories | Real-time acceleration/amplitude measurement module, PC-based control & data logging system with thermal/humidity/vibration synchronization |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 to +150 °C |
| Humidity Range | 10–98 %RH |
| Temperature Uniformity | ≤ ±2 °C |
| Humidity Uniformity | ≤ ±3 %RH (>75 %RH), ≤ ±5 %RH (≤75 %RH) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Humidity Fluctuation | ≤ ±2 %RH |
| Vibration Table Size | 350 × 350 mm (customizable) |
| Payload Capacity | 25 / 50 / 75 / 100 kg |
| Vibration Axis | Vertical, Horizontal, or Dual-Axis (selectable) |
| Frequency Range | 1–600 Hz, 1–3000 Hz, or 1–5000 Hz (model-dependent) |
| Displacement Peak-to-Peak | 0–5 mm |
| Maximum Acceleration | <20 g |
| Waveform | Sine |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Test Duration | 0–9999 h/min/sec (programmable) |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 5–98% RH |
| Temp. Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Heating System | Stainless Steel Finned Heaters with Infrared Ni-Cr Alloy Elements |
| Cooling System | Dual-Stage Hermetic Compressor (Tecumseh/Tecumseh-derived), Refrigerant R404A/R23 |
| Humidity Generation | Electric Steam Generator |
| Vibration Interface | Removable/Reconfigurable Platform with Epoxy-Silicone Sealed Coupling |
| Control System | Touchscreen PID Controller with RS232/RS485 Communication, Power Failure Recovery, Audit Trail Logging Capability |
| Brand | OEM / Custom-Branded |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,500 (approx.) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 5–98% RH |
| Temp. Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Heating Rate | ~4.0 °C/min |
| Cooling Rate | ~1.0 °C/min |
| Controller Memory | 100 programs × 1000 segments × 999 cycles |
| Communication Interface | RS-232 / RS-485 |
| Construction | Inner chamber – SUS#304 stainless steel |
| Vibration Integration | Removable vibration table on precision linear rails |
| Safety Protections | Compressor overload, refrigerant HP/LP cutoff, over-temperature/over-humidity cutout, dry-run protection, fuse, fault alarm system |
| Key Features | Platform Size: 1000 × 1000 mm |
|---|---|
| Chamber Dimensions (W×D×H) | 1100 × 1200 × 650 mm |
| Weight | ~350 kg |
| Power Supply | AC 220 V, Single-Phase, 15 A |
| Drive Mechanism | Motor-Cam Actuation |
| Max. Amplitude | 25.4 mm (1 in) |
| Rotational Speed Range | 120–300 rpm |
| Frequency Range | 2.00–5.00 Hz |
| Test Duration | Up to 80 min per cycle |
| Cycle Count | Up to 14,500 cycles per run |
| Operating Ambient | 23 °C ± 5 °C, RH < 80 % (non-condensing) |
| Sound Pressure Level | <74 dB(A) at 5 Hz |
| 台面材质 translated as Top Plate Material | 19-mm (3/4″) Structural Plywood |
| Display | Dual independent digital displays for simultaneous frequency and rpm readout |
| Control Modes | Timer-based and counter-based operation |
| Vibration Modes | Vertical-only, Horizontal-only, Dual-axis synchronous, Dual-axis alternating |
| Compliance | ISTA 3A, ISTA 3B, ASTM D999, ASTM D4169, ASTM D3580 |
| Key Specifications | Temperature Range: -40°C to +130°C |
|---|---|
| Humidity Range | 40–98% RH |
| Temp. Uniformity | ±2°C (unloaded) |
| Temp. Stability | ±0.5°C (unloaded) |
| Humidity Stability | ±2% RH |
| Heating Rate | ≤60 min (-20°C → +120°C) |
| Cooling Rate | ≤45 min (ambient → -20°C, unloaded) |
| Vibration Force | 2.94 kN (300 kgf) |
| Frequency Range | 5–2000 Hz |
| Max. Acceleration | 980 m/s² (100 g) |
| Max. Velocity | 1.1 m/s |
| Max. Displacement | 25 mm p-p |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis only) |
| Payload Capacity | 120 kg |
| Control Timer | 0–999 h |
| Compliance Standards | ASTM D999, ASTM D3580, ISTA 2A/3A, EN 60068-2-6 & -2-78, ANSI/UL 60950, ISO 16750-3 |
| Temperature Range | -20 °C to 150 °C |
|---|---|
| Temperature Uniformity | ≤ ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Ramp Rate | 0.7–1.0 °C/min |
| Test Duration Setting | 0–9999 hours |
| Sinusoidal Force Capacity | 2.94 kN (300 kgf) |
| Frequency Range | 5–500 Hz |
| Maximum Acceleration | 980 m/s² (100 g) |
| Maximum Velocity | 1.1 m/s |
| Maximum Displacement | 25 mm peak-to-peak |
| Moving Mass | 2.7 kg |
| Maximum Payload | 120 kg |
| Table Surface Dimensions | 150 mm × 150 mm |
| Vibration Axis | Vertical (Z-axis only) |
| Power Supply | AC 380 V ±10%, 50 Hz, 3-phase 5-wire |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Temperature Range | −40 °C to +100 °C |
| Humidity Range | 30–98 %RH |
| Temperature Uniformity | ≤2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Deviation | +2 to −3 %RH |
| Ramp Rate | 0.5–1.2 °C/min |