Combined Temperature Humidity Vibration Test Chamber
Filter
Showing 61–90 of 191 results
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,500 (approx. based on ¥150,000 at 1 USD = ¥6.97) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Vibration Frequency Range | 5–3000 Hz |
| Rated Sinusoidal Force | 14.2 kN |
| Rated Random Force (RMS) | 14.2 kN RMS |
| Maximum Acceleration | 20 g (196 m/s²) |
| Maximum Velocity | 2.00 m/s |
| Maximum Displacement | 51 mm peak-to-peak |
| Maximum Load Capacity | 300 kg |
| Ambient Operating Temperature | 5–40 °C (24-hr avg ≤25 °C) |
| Ambient Humidity | ≤85% RH |
| Power Supply | AC 220 V (±10%) / 50 Hz or AC 380 V (±10%) / 50 Hz |
| Key | Table Size: 350 × 350 mm (customizable) |
|---|---|
| Max Load Capacity | 25 / 50 / 75 / 100 kg |
| Vibration Axis | Vertical, Horizontal, or Dual-Axis (selectable) |
| Frequency Range | 1–600 Hz / 1–3000 Hz / 1–5000 Hz |
| Displacement Peak-to-Peak | 0–5 mm (5 mm max) |
| Max Acceleration | <20 g |
| Vibration Duration | 0–9999 h/min/sec (programmable) |
| Waveform | Sinusoidal |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Compliance | GB/T 2423.10 |
| Key | Brand: OEM/Custom OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Vibration Frequency Range | 0.5–600 Hz |
| Axes Configuration | Simultaneous X/Y/Z (Triaxial), Vertical/Horizontal/Longitudinal |
| Vibration Modes | Sinusoidal (half/full wave), Sweep, Programmable, Octave, Logarithmic, Acceleration/Displacement Control, Time-Controlled, Random (Multi-Order), Road Profile Simulation, 6-DOF Coupled Motion |
| Control System | Digital PID Frequency Controller with Interference-Resistant Circuitry |
| Base Construction | Heavy-Duty Steel Frame with Vibration-Damping Elastomeric Mounts |
| Compliance | Designed to support ASTM D999, IEC 60068-2-64, ISO 16750-3, MIL-STD-810H Method 514.8, GB/T 2423.10, GB/T 2423.3, GB/T 2423.17 |
| Key | Temperature Range: -40°C to +100°C |
|---|---|
| Humidity Range | 30–98% RH |
| Temp. Uniformity | ≤2°C (-40–100°C) |
| Temp. Stability | ±0.5°C |
| Humidity Control Accuracy | ±3% RH |
| Heating/Cooling Rate | ≥1°C/min |
| Internal Chamber Dimensions | 1000 × 900 × 1100 mm (D×W×H) |
| Observation Window | 270 × 320 mm |
| Power Supply | 380 V AC ±10%, 50 Hz, 3-phase 5-wire |
| Total Installed Power | ≥20 kW |
| Refrigeration | Mechanical, Air- or Water-Cooled |
| Compliance | GB/T 2423.1, GB/T 2423.3, GB/T 2423.4, IEC 60068-2-1 (Cold), IEC 60068-2-3 (Dry Heat), IEC 60068-2-30 (Damp Heat Cycle) |
| Key | Platform Dimensions (mm): 250×250 |
|---|---|
| Payload Capacity (kg) | 50 |
| Max Acceleration | 650 g |
| Max Stroke | 1800 mm |
| Max Slew Rate | 7.4 m/s² (HS) |
| Minimum Shock Duration (ms) | 1, 2, 3 / 2 (Optional) |
| Air Pressure Requirement | 6–8 kg/cm² |
| Frequency Range (Programmable) | 1–400 Hz |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Vibration Waveform | Sinusoidal |
| Max Displacement (p-p) | 0–5 mm |
| Programmable Segments | 15 segments per profile, each with independent frequency/time settings |
| Control Mode | Sweep, Fixed Frequency, Random (optional), Time-Controlled |
| Power Supply | 220 V ±20%, 5 A |
| Motor Power | 2.2 kW |
| Compliance | Designed for ASTM D999, ISO 13373-1, IEC 60068-2-6, IEC 60068-2-64, MIL-STD-810H Method 514.8 |
| Brand | Custom OEM / Other Industrial Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70°C to +150°C |
| Humidity Range | 5%–98% RH (standard: 20%–98% RH) |
| Temperature Control Accuracy | ±0.5°C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±2.0°C |
| Humidity Uniformity | ±3.0% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Vibration Interface | Integrated horizontal/vertical shaker mounting platform with sealed mechanical coupling |
| Construction | Inner chamber – SUS#304 stainless steel |
| Insulation | High-density polyurethane foam (CFC-free, temperature-resistant) |
| Cooling System | Air-cooled, single-stage compressor (to −20°C), dual-stage cascade compressor (to −70°C) |
| Safety Protections | Compressor overheat/overload protection, refrigerant high/low pressure cutoff, humidity/temperature over-limit alarms, fuse protection, water shortage detection, fault logging system |
| Controller | Touchscreen LCD interface (English/Chinese selectable), 100 programmable profiles × 1000 segments × 999 cycles, max segment duration 99h 59m, real-time curve display, RS-232/RS-485 serial communication, screen lock function, audit trail-ready data logging |
| Key | Brand: OEM/White-Label |
|---|---|
| Origin | Imported (Non-US/EU Designated Source) |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB Origin, Excl. Customs & Installation) |
| Internal Chamber Dimensions | Customer-Specified |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98 % RH (standard) |
| Temp. Control Accuracy | ±0.5 °C |
| RH Control Accuracy | ±2.5 % RH |
| Temp. Resolution/Distribution | 0.1 °C / ±2.0 °C |
| RH Resolution/Distribution | 0.1 % RH / ±3.0 % RH |
| Heating Rate | ~4.0 °C/min |
| Cooling Rate | ~1.0 °C/min |
| Insulation Material | High-Density Polyisocyanurate Foam (High-Temp Rated) |
| Interior/Exterior Material | SUS304 Stainless Steel |
| Compressor | Tecumseh (France-sourced) |
| Refrigerant | R404A (ASHRAE-certified, non-ozone-depleting) |
| Viewing Window | Double-layer Low-E Tempered Glass with Anti-Fog Heater & LED Illumination |
| Controller | LCD Touch Interface with Multi-Step Programmable Profile Support (QUICK/SLOPE Modes) |
| Optional Features | External Test Port (Power/Signal), Adjustable Shelves, Integrated Water Recovery System, Castor-Mounted Chassis with Locking Mechanism |
| Compliance | UL 1703, IEC 61215, ISO 16750-4, MIL-STD-810H (Vibration Module Configurable per ASTM D4728 & ISO 10326-1) |
| Key | Brand: Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 14,200 (FOB) |
| Compliance | GB/T 2423, GJB 150, IEC 60068 series |
| Control System | Siemens S7-1200 PLC + 10.1″ TFT Touch HMI |
| Vibration Interface | ISO 10816-compliant mechanical coupling |
| Refrigeration | Capillary tube-based auto-capacity modulation |
| Safety | Dual-stage overtemperature, compressor high/low pressure, phase loss, motor overload, door interlock, airflow monitoring |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Frequency Range | 1–5000 Hz |
| Max. Acceleration | 20 g |
| Vibration Amplitude (p-p) | 0–5 mm |
| Vibration Axes | Vertical + Horizontal |
| Waveform | Sine |
| Programmable Segments | Up to 15 segments (frequency & time per segment) |
| Sweep Duration Range | 1 second – 30 days |
| Test Duration Capability | Continuous operation ≥ 90 days |
| Max. Load Capacity | 100 kg (customizable) |
| Table Surface Dimensions | 50 × 50 cm (customizable) |
| Power Supply | 220 V ±20%, 5 A, 2.2 kW |
| Frequency Resolution | 0.01 Hz (display), ±0.1 Hz accuracy |
| Compliance | Designed to support test protocols per ISO 16750-3, IEC 60068-2-6, ASTM D4728, MIL-STD-810H Method 514.8, and GB/T 2423.10–2019 |
| Key | Brand: OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Max. Load Capacity | 100 kg |
| Frequency Range | 1–5000 Hz (0.01 Hz resolution, ±0.1 Hz accuracy) |
| Sweep Range | 1–5000 Hz (programmable duration: 1 s to 30 days) |
| Displacement Peak-to-Peak | 0–5 mm |
| Max. Acceleration | 20 g |
| Vibration Axes | Vertical + Horizontal (dual-axis synchronized control) |
| Waveform | Sine only |
| Programmable Segments | Up to 15 segments per test profile, each with independent frequency/time settings |
| Octave Tracking | 5-step logarithmic sweep (low→high, high→low, low→high→low, repeatable) |
| Table Surface | 50 × 50 cm (customizable) |
| Amplifier Power Rating | 2.2 kW |
| Input Voltage | 220 V ±20% AC |
| Max. Current Draw | 5 A |
| Control Interface | Full PC-based real-time control with waveform synthesis, data logging, and event-triggered sequencing |
| Calibration Traceability | NIST-traceable reference available upon request |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Load Capacity | 25 / 50 / 75 / 100 kg |
| Table Size | 350 × 350 mm (customizable) |
| Vibration Axis | Vertical, Horizontal, or Dual-Axis (selectable) |
| Frequency Range | 1–600 Hz / 1–3000 Hz / 1–5000 Hz |
| Displacement Peak-to-Peak | 0–5 mm |
| Max Acceleration | <20 g |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Test Duration | 0–9999 h/min/sec (programmable) |
| Waveform | Sine |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Compliance | GB/T 2423.10 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 21,500 (approx.) |
| Vibration Table Size | 350 × 350 mm (customizable) |
| Max Load Capacity | 25 / 50 / 75 / 100 kg |
| Vibration Axis | Vertical, Horizontal, or Dual-Axis (selectable) |
| Frequency Range | 1–600 Hz / 1–3000 Hz / 1–5000 Hz |
| Displacement Amplitude | 0–5 mm peak-to-peak |
| Max Acceleration | <20 g |
| Test Duration | 0–9999 h/min/sec (programmable) |
| Waveform | Sine |
| Frequency Resolution | 0.01 Hz |
| Accuracy | ±0.1 Hz |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Key | Temperature Range: -70°C to +150°C |
|---|---|
| Humidity Range | 5–98% RH (standard: 20–98% RH) |
| Temp. Control Accuracy | ±0.5°C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±2.0°C |
| Humidity Uniformity | ±3.0% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Construction | Interior & Exterior SUS304 Stainless Steel |
| Insulation | High-Density Polyurethane Foam with Ethyl Chloroformate Base |
| Cooling System | Air-Cooled, Single-Stage (to -20°C) or Twin-Stage Compressor (to -70°C) |
| Safety Protections | Fuseless Circuit Breaker, Compressor Overload Protection, Refrigerant HP/LP Cut-off, Over-Temp/Over-Humidity Interlocks |
| Controller | Color LCD Touchscreen with Programmable Temp/Humidity Profiles, RS-232 Interface |
| Vibration Integration | Designed for External Electrodynamic or Hydraulic Shaker Table Coupling (User-Specified) |
| Key | Brand: OEM/White-Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Control | Fuji PXR3 Digital PID Controller (±0.1 °C accuracy, PT100 sensor) |
| Frequency Range | 50 Hz fixed |
| Vibration Axes | Vertical + Horizontal (Dual-Axis Simultaneous) |
| Max Load Capacity | 100 kg |
| Max Acceleration | <20 g |
| Displacement Amplitude | 0–5 mm peak-to-peak |
| Waveform | Sinusoidal (half/full cycle) |
| Sweep & Dwell Modes | Programmable (1–65,000 cycles, 1–65,000 s duration) |
| Frequency Resolution | 0.01 Hz |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Key | Temperature Range: -40°C to +100°C |
|---|---|
| Humidity Range | 30–98% RH |
| Temp. Uniformity | ≤±2°C |
| Temp. Fluctuation | ±0.5°C |
| Humidity Deviation | +2 to −3% RH |
| Ramp Rate | 0.5–1.2°C/min |
| Chamber Models | OK-ZTH-408 (60×85×80 cm), OK-ZTH-800 (100×100×80 cm), OK-ZTH-1000 (100×100×100 cm) |
| Safety Protections | Overload, Ground Fault, Overtemperature, Compressor High-Pressure, Motor Overload, Auto Power Cut-off with Audible Alert |
| Compliance | Designed per IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14, ISO 16750-4, MIL-STD-810H (Temperature & Humidity Sections), and ASTM D4332 |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 5–98% RH |
| Vibration Axes | X, Y, Z (Triaxial Electromagnetic Shaker Integration) |
| Control Resolution | 0.1 °C / 0.1% RH |
| Temp. Uniformity | ±2.0 °C |
| Humidity Uniformity | ±3.0% RH |
| Temp. Stability | ±0.5 °C / ±2.5% RH |
| Ramp Rate | +4.0 °C/min (heat-up), −1.0 °C/min (cool-down) |
| Refrigeration | Twin-stage cascade system with original Tecumseh/Tecumseh-derived hermetic compressors |
| Internal Construction | Mirror-finished SUS304 stainless steel |
| Insulation | High-density polyurethane foam (HCFC-free, thermal conductivity ≤0.022 W/m·K) |
| Interface | 7″ TFT-LCD touchscreen controller with RS-232/RS-485 and Ethernet (optional) |
| Compliance | Designed per IEC 60068-2-1, -2-2, -2-14, -2-64 |
| Temperature Range | -20 °C to 130 °C |
|---|---|
| Humidity Range | 40–98 % RH |
| Temperature Uniformity | ±2 °C (unloaded) |
| Temperature Fluctuation | ±0.5 °C (unloaded) |
| Humidity Fluctuation | ±2 % RH |
| Heating Rate | -20 °C to 120 °C ≤ 60 min |
| Cooling Rate | Ambient to -20 °C ≤ 45 min (unloaded) |
| Vibration Force (Sine) | 2.94 kN (300 kgf) |
| Frequency Range | 5–2000 Hz |
| Max Acceleration | 980 m/s² (100 g) |
| Max Velocity | 1.1 m/s |
| Max Displacement | 25 mm p-p |
| Moving Mass | 2.7 kg |
| Payload Capacity | 120 kg |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis) |
| Time Setting Range | 0–999 h |
| Compliance | GB/T 2423.1, GB/T 2423.3, GB/T 2423.4, IEC 60068-2-1, IEC 60068-2-3, IEC 60068-2-30 |
| Key | Temperature Range: -70°C to +150°C |
|---|---|
| Humidity Range | 5–98% RH (standard: 20–98% RH) |
| Temp. Control Accuracy | ±0.5°C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±2.0°C |
| Humidity Uniformity | ±3.0% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Chamber Interior/Exterior Material | SUS304 Stainless Steel |
| Insulation | High-Density Polyurethane Foam with Closed-Cell Structure |
| Cooling Method | Air-Cooled, Single-Stage or Two-Stage Refrigeration System (selected per low-temp requirement) |
| Safety Protections | Overcurrent Protection, Compressor Overload Protection, Refrigerant HP/LP Cut-off, Over-Temp/Over-Humidity Interlock |
| Controller | Full-Color LCD Touchscreen with Programmable Ramp-Soak Profiles & RS-232 Interface |
| Vibration Integration | Modular Interface for External Electrodynamic or Hydraulic Shaker Systems (user-specified model) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Table Size | 350 × 350 mm (customizable) |
| Frequency Range | 1–600 Hz / 1–3000 Hz / 1–5000 Hz |
| Peak-to-Peak Amplitude | 0–5 mm |
| Max Acceleration | <20 g |
| Load Capacity | 25 kg / 50 kg / 75 kg / 100 kg |
| Vibration Direction | Vertical, Horizontal, or Dual-Axis (selectable) |
| Waveform | Sinusoidal |
| Frequency Resolution | 0.01 Hz |
| Frequency Accuracy | ±0.1 Hz |
| Test Duration | 0–9999 h/min/sec (programmable) |
| Power Supply | AC 220 V / 50 Hz or AC 380 V / 50 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Thrust Range | 2–5,000 kgf (optional up to 10,000 kgf) |
| Frequency Response | DC–2,000 Hz (optional up to 20,000 Hz) |
| Maximum Velocity | 1.8–2.3 m/s |
| Maximum Payload | 80–400 kg (configurable) |
| Voice Coil Mass | 9–18 kg |
| Rated Thrust | 400–1,000 kgf |
| Frequency Range | 2–2,500 Hz or 2–3,000 Hz |
| Peak Acceleration | 44–66.6 g |
| Maximum Displacement | 30–75 mm |
| Voice Coil Diameter | 150–260 mm |
| Air Supply Requirement | 6–8 kgf/cm² |
| Brand | Other brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General distributor |
| Price | USD 14,000 (approx. based on ¥100,000 at 1:7.1 exchange rate) |
| Frequency Range | 5–3000 Hz |
| Rated Sinusoidal Force | 14.2 kN |
| Rated Random Force (RMS) | 14.2 kN |
| Max Acceleration | 784 m/s² |
| Max Velocity | 2.00 m/s |
| Max Displacement (p-p) | 51 mm |
| Payload Capacity | 300 kg |
| Refrigeration | Twin-stage or cascade low-temperature circuit with Tecumseh (France) hermetic compressors |
| Humidity Control Range | 20–98% RH |
| Temperature Range | −70°C to +180°C (typical, system-dependent) |
| Vibration Table Diameter | Ø280 mm |
| Table Moving Mass | 18 kg |
| Amplifier Output Power | 20 kVA |
| System Weight | ~2,000 kg (total) |
| Key | Brand: OEM/Third-Party Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Frequency Range | 5–3000 Hz |
| Max Acceleration | 980 m/s² (100 g, unloaded) |
| Max Velocity | 1.85 m/s |
| Peak-to-Peak Displacement | 51 mm |
| Max Payload | 300 kg |
| Moving Mass | 22 kg |
| Continuous Operation Duration | 20 h |
| Ambient Operating Conditions | 0–40 °C, ≤90% RH (at 25 °C) |
| Compliance | GB/T 13310-2007, GB/T 2423.10-2008, GJB 150.3–1986, GJB 150.16–1986, GJB 360A–1996 (Methods 204, 213, 214), IEC 60068-2-6 |
| Brand | OEM / Custom-Built System |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Range | −70 °C to +200 °C |
| Humidity Range | 30–98 % RH |
| Climate Chamber Volume | 225–800 L |
| Vibration Force Capacity | 980 N to 49 kN |
| Frequency Range | 2–2500 Hz |
| Max. Acceleration | 100 g (980 m/s²) |
| Max. Displacement | ±12.5 mm (25 mm pk–pk) |
| Max. Load Mass | 190 kg |
| Max. Velocity | 1.5 m/s |
| Armature Mass | 6 kg |
| Waveform Distortion | <5 % THD |
| Leakage Flux | <10 Gauss at 10 cm from coil surface |
| Dimensions (L×W×H) | 800×600×710 mm |
| System Weight | 700 kg |
| Key Features | Sinusoidal vibration |
|---|---|
| Frequency range | 1–200 Hz |
| Max acceleration | 10 g (peak) |
| Max displacement | 0–5 mm p-p |
| Test table size | 450 × 450 × 46 mm |
| Payload capacity | 40 kg |
| Power supply | 220 V ±10%, 2.2 kW |
| Frequency resolution | ±1 Hz |
| Compliance | ASTM D999, ISO 8767, ISTA 3A/3E, GB/T 4857.7, GB/T 4857.10 |
| Key | Temperature Range: -70 °C to +200 °C |
|---|---|
| Humidity Range | 30–98% RH |
| Climate Chamber Volume | 225–800 L |
| Vibration Force | 980 N to 49 kN |
| Frequency Range | 2–2500 Hz |
| Max Acceleration | 100 g (980 m/s²) |
| Max Displacement | 25 mm (pk-pk) |
| Max Velocity | 1.5 m/s |
| Moving Mass | 6 kg |
| Payload Capacity | 190 kg |
| Distortion | <5% THD |
| Residual Magnetic Field | <10 Gauss (at 10 cm from armature) |
| Dimensions (L×W×H) | 800×600×710 mm |
| Weight | 700 kg |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.3, GJB 150.3, GJB 150.4, IEC 60068-2-3 (Test Ca), IEC 60068-2-30 |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Frequency Range | 1–5000 Hz |
| Max. Acceleration | 20 g |
| Vibration Amplitude | 0–5 mm p-p |
| Sweep Duration | 1 sec – 30 days |
| Programmable Segments | 15 segments, each with user-defined frequency & dwell time |
| Vibration Axes | Vertical + Horizontal |
| Waveform | Sinusoidal |
| Control Mode | Full PC-based digital control with real-time feedback |
| Power Supply | 220 V ±20%, 5 A, 2.2 kW |
| Table Surface | 50 × 50 cm (customizable) |
| Max. Load Capacity | 100 kg |
| Operating Temperature Range | –70°C to +180°C (integrated chamber) |
| Humidity Range | 10–98% RH (non-condensing) |
| Compliance | ASTM D4728, ISO 16750-3, IEC 60068-2-64, MIL-STD-810H Method 514.8 |
| Temperature Range | -20 °C to +130 °C |
|---|---|
| Humidity Range | 40–98% RH |
| Temperature Uniformity | ±2 °C (unloaded) |
| Temperature Fluctuation | ±0.5 °C (unloaded) |
| Temperature Deviation | ≤±2 °C |
| Humidity Fluctuation | ±2% RH |
| Humidity Deviation | ≤±2% RH |
| Heating Rate | -20 °C to +120 °C ≤ 60 min (unloaded) |
| Cooling Rate | Ambient to -20 °C ≤ 45 min (unloaded) |
| Vibration Mode | Sinusoidal |
| Frequency Range | 5–2000 Hz |
| Max. Acceleration | 980 m/s² (100 g) |
| Max. Velocity | 1.1 m/s |
| Max. Displacement | 25 mm p-p |
| Force Capacity | 2.94 kN (300 kgf) |
| Effective Moving Mass | 2.7 kg |
| Max. Payload | 120 kg |
| Table Diameter | 150 mm |
| Vibration Axis | Vertical (Z-axis) |
| Test Duration Setting | 0–999 hours |
| Power Efficiency | 60% reduction vs. conventional controllers |