Electrochemical Instrument Accessories
Filter
Showing all 19 results
| Brand | ALS |
|---|---|
| Origin | Japan |
| Model | 012613 |
| Electrode Type | Rotating Ring-Disk Electrode (RRDE) |
| Ring Outer Diameter | 7 mm |
| Ring Inner Diameter | 5 mm |
| Disk Diameter | 4 mm |
| Insulator Diameter | 12 mm |
| Total Length | 25 mm |
| Insulator Material | PEEK (resistant to organic solvents) |
| Compatible System | ALS RRDE-3A Rotating Ring-Disk Electrode Instrument |
| Polishing Compatibility | PK-3 Electrode Polishing Kit |
| Electrode Material Options | Multiple disk/ring material combinations available (e.g., Pt, Au, GC, Ag, Ni, Cu, and custom bimetallic configurations) |
| Brand | ALS |
|---|---|
| Origin | Japan |
| Model No. | 013491 |
| Disk Material | Glassy Carbon |
| Disk Diameter | 5 mm |
| Insulator Diameter | 12 mm |
| Total Length | 25 mm |
| Insulation | PTFE (Teflon) Sleeve |
| Brand | ALS |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | RHEK/013597 |
| Instrument Type | Reference Electrode for Electrochemical Measurements |
| Electrolyte Compatibility | 1.2 mol/L HCl (pH ≈ 0, [H⁺] ≈ 1 M) |
| Reference Scale | Defined vs. Standard Hydrogen Electrode (SHE) |
| Brand | ChemTron |
|---|---|
| Origin | Germany |
| Model | ScienceLine B 2220+ |
| Electrode Type | Single-Reference Electrode |
| Body Material | Glass |
| Reference System | Ag/AgCl (3 mol/L KCl) |
| Temperature Range | −5 °C to +100 °C |
| pH Range | 0–14 |
| Junction Type | Double-Liquid-Junction |
| Sensing Element | Platinum |
| Connection | L 1 N Cable |
| Compliance | ASTM D1129, ISO 7888, USP <798>, GLP-ready configuration |
| Heating Temperature Range | Ambient to 350 °C |
|---|---|
| Heater Type | Cartridge Heater |
| Max. Sample Volume | <10 mL |
| Carrier Gas | Nitrogen or Dry Air (dry air compressor optional) |
| Gas Flow Rate | 30–300 L/min |
| Inlet Pressure | ≤0.8 MPa |
| Desiccant | Molecular Sieve |
| Power Supply | AC 100–240 V, 50/60 Hz, 100 VA |
| Dimensions (W×D×H) | 220 × 430 × 200 mm |
| Weight | Approx. 8 kg |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Model | EV-2000L |
| Pricing | Available Upon Request |
| Moisture Evaporation Method | Azeotropic Distillation with Inert Carrier Gas |
| Heating Range | Ambient to 200 °C |
| Heater Type | Band Heater |
| Max Sample Volume | ≤10 mL |
| Azeotropic Solvent | Toluene or Xylene (5–10 mL per analysis) |
| Carrier Gas | Nitrogen or Dry Compressed Air (optional integrated air dryer/pump available) |
| Gas Flow Rate | 30–300 L/min |
| Inlet Pressure | ≤0.8 MPa |
| Desiccant | Molecular Sieve (4 Å) |
| Power Supply | AC 100–240 V, 50/60 Hz, 150 VA |
| Dimensions (W×D×H) | 220 × 370 × 265 mm |
| Net Weight | ~7 kg |
| Brand | ALS (Japan) |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | Imported |
| Model | H2G1 |
| Instrument Category | Electrochemical Hydrogen Generator |
| Power Source | 4×AAA batteries (≈30 operations) |
| Electrolysis Time | ~4 min (with 1.2 mol/L HCl solution) |
| Dimensions | 80 mm (W) × 35 mm (H) × 140 mm (D) |
| Heating Temperature | Ambient to 300 °C |
|---|---|
| Heater Type | Band Heater |
| Sample Volume Capacity | ≤20 mL |
| Carrier Gas | Dry Nitrogen or Dry Air |
| Gas Flow Rate | 0–300 L/min |
| Maximum Gas Pressure | ≤0.8 MPa |
| Nitrogen Purity | ≥99.99% (High-Purity Grade) |
| Desiccant | 100 g Molecular Sieve |
| Safety Protections | Overtemperature Protection, Overpressure Gas Safety Cut-off |
| Power Supply | AC 100–240 V, 50/60 Hz, 100 W |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | 800 |
| Pricing | Upon Request |
| Instrument Type | Electrochemical Sample Handler / Reagent Dispenser |
| Brand | Metrohm |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Model | 814 |
| Instrument Type | Electrochemical Sample Processor |
| Sample Capacity | 12–48 positions (75 mL vials) |
| Sample Volume Range | 75–250 mL |
| Sample Tray Recognition | Optical identification sensor for interchangeable trays |
| Fluid Handling | Single-tower architecture with optional 1 or 2 peristaltic pumps |
| Positioning System | Single movable arm (left- or right-configurable) + single external titration position |
| Functional Capabilities | Liquid handling, precise aspiration/dispensing, automated Karl Fischer coulometric/microcoulometric water determination |
| Method Storage | Up to 999 user-programmable methods |
| Method Structure | Three-phase workflow (Start → Sample Analysis → End), each phase supporting up to 99 sequential steps |
| Interfaces | 1 × USB port, 3 × MSB (Metrohm Serial Bus) ports |
| Host Integration | Designed exclusively for seamless control by Metrohm Titrando series titrators |
| Brand | Metrohm |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Imported Instrument |
| Models | 814, 815 |
| Instrument Type | Electrochemical Sample Processor |
| Sample Capacity (814) | 12–48 positions (75 mL vials) |
| Sample Capacity (815) | 28–141 positions (75 mL vials) |
| Sample Volume Range (814) | 75–250 mL |
| Sample Volume Range (815) | 11–250 mL |
| Sample Tray Recognition | Optical cup identification sensor |
| Pump Configuration (814) | 1–2 peristaltic pumps |
| Pump Configuration (815) | 2–4 peristaltic pumps |
| Robotic Arm Configuration (814) | Single arm (left- or right-mounted) |
| Robotic Arm Configuration (815) | Dual arms (independently configurable left/right) |
| Dispensing Positions (814) | One external titration position |
| Dispensing Positions (815) | Two external titration positions |
| Method Storage | Up to 999 user-programmable methods |
| Method Structure | Three-phase architecture (Start → Sample Analysis → End), each phase supporting up to 99 programmable steps |
| Interface | USB 2.0 + 3× MSB (Metrohm Serial Bus) ports |
| Host Integration | Fully controlled by Titrando series titrators |
| Brand | Metrohm |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | 815 |
| Instrument Category | Electrochemical Sample Processor |
| Sample Capacity | 28–141 positions (75 mL vials) |
| Sample Volume Range | 11–250 mL |
| Modular Configuration | Single or dual work towers |
| Fluid Handling | Up to four peristaltic pumps (configurable) |
| Robotic Arms | Dual movable arms (left/right orientation) |
| External Titration Positioning | Dual external titration stations |
| Detection | Optical sample cup identification sensor |
| Method Storage | 999 programmable methods |
| Method Structure | Three-phase architecture (Start / Sample Analysis / End), each phase supporting up to 99 discrete steps |
| Interfaces | 1× USB 2.0, 3× MSB (Metrohm Serial Bus) |
| Brand | Metrohm |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | 865 |
| Instrument Type | Electrochemical Sample Processor |
| Dosing Modes | DOS, XDOS, CNTD, LQT |
| Interface | USB (native), RS-232/USB Box (optional) |
| Display | Large graphical LCD |
| Connectivity | Supports USB Hub for concurrent peripherals (keyboard, mouse, printer, USB storage) |
| Compliance | Designed for GLP-compliant workflows |
| Brand | Metrohm |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Manufacturer |
| Origin Category | Imported |
| Model | 869 |
| Instrument Type | Electrochemical Sample Processor |
| Sample Positions | 12 (120 mL vials) |
| Built-in Method Storage | Up to 100 user-editable methods |
| Interface | USB |
| Compatibility | Titrino Plus series titrators (direct connection, no external controller or PC required) |
| Optional Accessory | 843 Pump Unit for automated rinsing and drainage |
| Emergency Sample Slot | Yes |
| Control Interface | Integrated membrane keypad with large LCD display |
| Brand | Metrohm |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Origin Category | Imported |
| Model | 876 |
| Instrument Type | Electrochemical Liquid Handler / Semi-Automatic Titration System |
| Connectivity | USB interface (supports USB Hub for multi-device integration), optional RS-232/USB Box for balance interfacing |
| Dosing Modes | DOS (Manual Dosing with Endpoint Monitoring), XDOS (Extended Dosing with preset volume, time, or flow rate control) |
| Compatibility | Fully interoperable with Metrohm 805 Dosimat for continuous reagent dispensing |
| Brand | Metrohm |
|---|---|
| Origin | Switzerland |
| Manufacturer | Metrohm AG |
| Import Category | Imported Instrument |
| Model | OMNIS KF Oven |
| Instrument Type | Automated Sample Processor for Electrochemical Moisture Analysis |
| Maximum Heating Temperature | 300 °C |
| Sample Capacity | Up to 100 × 6 mL vials (unattended) |
| Compatible Vial Standards | ISO 8362 (2R–30R), plus standard 6 mL crimp-top and 8 mL screw-cap vials |
| Heating Modules | Configurable with 1 or 2 independent oven modules |
| Carrier Gas Options | Dry ambient air or nitrogen, with integrated large-capacity molecular sieve dryer |
| Needle Depth Adjustment | Motorized, programmable syringe needle extension for optimal vial penetration |
| Optional Integration | OMNIS Liquid Handling Module for automatic reagent replenishment (KF reagent and methanol) |
| Brand | NorECs |
|---|---|
| Origin | Norway |
| Model | ProboStat |
| Instrument Type | Electrochemical Sample Holder |
| Operating Temperature (Long-term) | Up to 1400 °C |
| Operating Temperature (Short-term) | Up to 1600 °C |
| Sample Geometry | Disc-shaped (Ø 10–24 mm, thickness 25–50 mm) or Rod-shaped (Ø up to 24 mm, length 30–1500 mm) |
| Electrode Configurations | 2-, 3-, or 4-electrode setups |
| Gas Environment | Oxidizing, inert, reducing, corrosive, humid/dry |
| pressure range | 10⁻² mbar to 1 bar (up to 25 bar in sealed steel tube) |
| Dual-chamber capability | Yes |
| Van der Pauw measurement | Supported (4-point) |
| Seebeck coefficient measurement | Supported (rod geometry) |
| Electrical measurements | DC conductivity, impedance spectroscopy, polarization, dielectric breakdown (HV version), concentration cell, transference number, permeability, fuel cell testing |
| Brand | Pine Instruments (Pine Test Equipment, Inc.) |
|---|---|
| Origin | USA |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Model | AFMSRCE / MSR |
| Rotation Speed Range | 0–10,990 rpm |
| Motor Power | 20 W |
| Speed Display Accuracy | ±1% |
| Control Architecture | Separated Motor & Controller Units |
| Electrical Protection | Integrated Surge and Voltage Instability Protection |
| Interface | Analog Input/Output (0–10 V) for External Speed Command and Tachometer Signal Output |
| Electrode Compatibility | Standard RDE, RRDE, and Rotating Ring-Disk Electrode (RRDE) configurations |
| Brand | dc-energies |
|---|---|
| Disk Diameter | 5.61 mm |
| Ring Outer Diameter | 15.0 mm |
| Material | Glassy Carbon Disk / Platinum Ring |
| Insulator | PTFE Shroud |
| Max Rotation Speed | 3000 rpm |
| Collection Efficiency | 37% |
| Operating Temperature | ≤25 °C |
| Origin | Hubei, China |
| Instrument Type | Electrochemical Working Electrode |