Environmental Test Chamber
Filter
Showing 331–360 of 3643 results
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Regional Origin | Domestic (PRC) |
| Model Variants | GS-250, GS-500, GS-1000 |
| Pricing | Upon Request |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 28,000 (FOB) |
| Compliance Standards | MIL-STD-810F, MIL-STD-883C, GJB 150A, GJB 360B, GB/T 2423.15, IEC 60068-2-27 |
| Max Acceleration Range | 30–400,000 g |
| Sample Mounting Radius | 200–1000 mm |
| Specimen Height Limit | 200–300 mm |
| Test Axes | X, Y, Z orthogonal directions |
| Payload Capacity | 5–200 kg |
| Power Supply | AC 380 V, 1.5–6.5 kVA |
| Continuous Operation Duration | 30–60 min |
| Control System | Industrial PC with Real-Time PID Regulation |
| Slip Ring Interface | 15-channel, 500 V / 5 A |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C (configurable models) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| Humidity Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Heating Rate | ~4.0 °C/min |
| Cooling Rate | ~1.0 °C/min |
| Controller | 7-inch LCD touchscreen, bilingual (English/Chinese) |
| Refrigeration System | Hermetic dual-stage compressor (R404A/R23) |
| Construction | SUS#304 stainless steel interior & exterior |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Key Features | LCD digital temperature & humidity controller |
|---|---|
| Segment duration | 0–999 h 59 min |
| Loop count | 1–999 partial or 0–999 full cycles |
| Chamber material | seamless fiberglass-reinforced plastic (FRP) |
| Interior components | stainless steel, copper, or corrosion/heat-resistant materials |
| Safety protections | leakage current, short circuit, overtemperature, low-water, end-of-test, overcurrent |
| Compliance | GB/T 2423.17–2022, IEC 60068-2-11, ASTM B117, ISO 9227, DIN 50021 |
| Temperature range | +5°C to 55°C |
| Humidity range | 85–95% RH |
| Temp. uniformity | ≤ ±2°C |
| Temp. stability | ≤ ±0.5°C |
| Salt deposition rate | 1–2 mL / 80 cm²·h |
| Spray modes | continuous or cyclic |
| Timer range | 1–999 (s/min/h) |
| Power supply | AC 220V±10% / 380V±10%, 50 Hz |
| Ambient operating conditions | 5–30°C, ≤85% RH |
| Heating system | independent Ni-Cr alloy heaters |
| Spray system | tower-type atomizer with non-crystallizing nozzles |
| Salt solution pre-heating | thermally balanced with chamber air |
| Filtration | inline water filter on suction line |
| Calibration-ready | PT100 platinum resistance sensors, standard funnel & graduated cylinder for deposition measurement |
| Origin | Italy |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | COFOMEGRA |
| Pricing | Available Upon Request |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,000 (FOB) |
| Compliance Standards | GB/T 2423.17–1993, IEC 60068-2-11, ASTM B117, MIL-STD-810H, DIN 50021 |
| Temperature Range | +10°C to +65°C |
| Humidity Range | 30–98% RH |
| Salt Fog Concentration | 5% NaCl (by weight), pH 6.5–7.2 |
| Chamber Sealing | Water-Sealed Lid Design |
| Construction Material | Fiberglass-Reinforced Polymer (FRP) Monocoque Body |
| Internal Accessories | Stainless Steel V-Type Sample Racks, Dual Precision Nozzles, Calibrated Funnel Assembly |
| Safety Protections | Overtemperature, Low-Water Level, Leakage Current, Short-Circuit, Overcurrent, End-of-Test Auto-Shutdown |
| Brand | Custom OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 21,500 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 5–98% RH |
| Temp. Control Accuracy | ±0.5 °C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Ramp Rate | +4.0 °C/min (heat), −1.0 °C/min (cool) |
| Humidity Resolution | 0.1% RH |
| Temp. Resolution | 0.1 °C |
| Vibration Interface | Integrated electrodynamic or servo-hydraulic shaker mounting with dynamic load transfer optimization |
| Controller | 7″ TFT LCD touchscreen, embedded real-time OS, programmable profiles (sine, random, swept-sine, resonance dwell), RS-232/RS-485, optional Ethernet & USB data export |
| Safety Systems | Dual-stage compressor high/low pressure cut-off, over-temperature/over-humidity protection, phase failure detection, water shortage alarm, redundant thermal fuses, fault logging with timestamped event history |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,600 (FOB, indicative only — final quotation subject to configuration, certification, and delivery terms) |
| Key | Temperature Range: -70°C to +150°C |
|---|---|
| Humidity Range (optional) | 20–98% RH |
| Rapid TC Range | -45°C to +85°C |
| Rapid TC Accuracy | ±3.0°C |
| Ramp Rates | 5–30°C/min (selectable A–F types) |
| Temp. Control Accuracy | ±0.5°C |
| Humidity Control Accuracy | ±2.5% RH |
| Temp. Uniformity | ±2.0°C |
| Humidity Uniformity | ±3.0% RH |
| Temp. Resolution | 0.1°C |
| Humidity Resolution | 0.1% RH |
| Construction | SUS304 inner chamber, stainless steel or SECC cold-rolled steel with powder coating outer shell |
| Insulation | High-density polyurethane foam |
| Cooling | Water-cooled |
| Compressor Options | Tecumseh (France), Bitzer (Germany) |
| Power Supply | AC380V, 3-phase 5-wire, 50/60 Hz |
| Weight Range | 950–2300 kg |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.5, GJB 360.7, IEC 60068-2-14 (Test N), QC/T 17, EIA-364-32 |
| Safety Protections | High/low pressure cut-off, over-temperature/over-humidity protection, compressor overload protection, fuse, water shortage alarm, fault warning system |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70°C to +150°C (configurable) |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Temperature Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temperature Fluctuation | ±2°C |
| Humidity Fluctuation | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Construction Material | SUS#304 Stainless Steel |
| Control System | LCD Touchscreen Controller with English/Chinese Interface |
| Compliance | MIL-STD-810G (Method 501.6, 502.6), IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-30 (Damp Heat Cycle), GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.4–1993 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 14,000 (FOB) |
| Vibration Frequency Range | 100–300 rpm (continuous adjustment) |
| Amplitude | 25.4 mm (1 in) peak-to-peak |
| Max Payload Capacity | 100 kg (customizable up to 500 kg) |
| Operating Duration | Up to 9999 h/min/sec |
| Motor Power | 1 HP (746 W) |
| Max Current Draw | 4 A |
| Test Table Dimensions | 100 cm × 120 cm (customizable) |
| Compliance | ASTM D999, ASTM D3580, ISTA 3A/3E/3H, EN 60068-2-6, EN 60068-2-14, ANSI X3.36, UL 60950-1 |
| Key | Temperature Range: -70°C to +150°C |
|---|---|
| Humidity Range | 30–98% RH |
| Temp. Uniformity | ≤ ±2.0°C |
| Temp. Stability | ≤ ±0.5°C |
| Humidity Stability | +2 to –3% RH |
| Cooling Rate (no load) | 0.7–1.0°C/min |
| Heating Rate (no load) | 1.0–3.0°C/min |
| Vibration Type | Electromagnetic Shaker |
| Frequency Range | 2–500 Hz |
| Displacement Amplitude | 0–5 mm |
| Acceleration Capacity | 0–20 gₚₖ |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.3, GB/T 2423.10, GB/T 2423.48, GB/T 2423.49, GB 10586, GB 10589, GB 10592, GB 11158, GB/T 5170.2, GB/T 5170.5 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Engineered (OK-TH Series) |
| Price | USD 2,650 (FOB) |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable (e.g., OK-TH Series) |
| Price | USD 2,650 (FOB) |
| Internal Volume Range | 80 L to 1000 L |
| Temperature Range Options | 0–150°C, –20–150°C, –40–150°C, or –70–150°C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Temp. Uniformity | ±0.5°C |
| RH Uniformity | ±2.5% RH |
| Temp. Stability | ±2.0°C |
| RH Stability | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Ramp Rate | Heating ~4.0°C/min |
| Refrigeration System | Hermetic, low-noise dual-stage compressor with eco-friendly refrigerants (R404A/R23) |
| Controller | Full-color touchscreen HMI with EN/CH language toggle |
| Construction | Interior & exterior SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film for anti-fog observation |
| Port | One 50 mm diameter test port (left side) |
| Accessories | Two adjustable SUS#304 shelves, four casters + four leveling feet |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable (OK-TH Series) |
| Temperature Range | -70 °C to +150 °C (selectable variants: 0 °C, -20 °C, -40 °C lower limits) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH or 10–98 %RH) |
| Uniformity | ±0.5 °C / ±2.5 %RH |
| Stability | ±2 °C / +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | ~4.0 °C/min (heating), ~1.0 °C/min (cooling) |
| Construction | Interior & Exterior – SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Port | One Ø50 mm test port (left side) |
| Refrigeration | Hermetic low-noise dual-stage compressor system with R404A/R23 eco-refrigerants |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable (OK-TH Series) |
| Temperature Range | -70 °C to +150 °C |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Uniformity | ±0.5 °C / ±2.5 %RH |
| Stability | ±2 °C / +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | ~4.0 °C/min (heat-up), ~1.0 °C/min (cool-down) |
| Internal Volume Options | 80 L to 1000 L |
| Construction | Interior & Exterior – SUS#304 Stainless Steel |
| Viewing Window | Multi-layer laminated tempered glass with embedded conductive ITO film |
| Port | One 50 mm diameter test port (left side) |
| Refrigeration System | Hermetic low-noise dual-stage compressor (R404A/R23 eco-refrigerant) |
| Controller | Color TFT touchscreen HMI, bilingual English/Chinese interface |
| Compliance | MIL-STD-810G (Method 501.6, 502.6), IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-78 (Steady-State Damp Heat), IEC 60068-2-30 (Cyclic Damp Heat), GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.4–1993 |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| Temperature Range | −70 °C to +150 °C (selectable sub-ranges A–D) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | +4.0 °C/min (heat-up), −1.0 °C/min (cool-down) |
| Refrigerant | R404A/R23 (environmentally compliant) |
| Controller | Color TFT touchscreen, bilingual (English/Chinese), GLP-compliant data logging interface |
| Construction | Interior & exterior SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Test Port | One 50 mm diameter port (left side) |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Engineered (OK-TH Series) |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| Temperature Range | –70 °C to +150 °C (selectable sub-ranges A–D) |
| Humidity Range | 5–98 %RH (standard 20–98 %RH |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2 to +3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | Heating ~4.0 °C/min |
| Refrigeration | Hermetic dual-stage compressor system with eco-friendly R404A/R23 refrigerant blend |
| Control System | Full-color LCD touchscreen controller with bilingual (English/Chinese) interface |
| Construction | Interior and exterior chambers fabricated from SUS#304 stainless steel |
| Viewing Window | Multi-layer laminated tempered glass with integrated conductive ITO film for anti-fogging and real-time observation |
| Port | One 50 mm diameter test port on left side (sealable, cable-ready) |
| Safety | Comprehensive fault detection — over-temperature, over-humidity, compressor overload, sensor failure — with automatic power cutoff and on-screen alarm logging |
| Compliance | Meets IEC 60068-2-1 (Cold), IEC 60068-2-2 (Dry Heat), IEC 60068-2-78 (Steady-State Damp Heat), IEC 60068-2-30 (Cyclic Damp Heat), GB/T 2423.1–2001, GB/T 2423.2–2001, GB/T 2423.4–1993, MIL-STD-810G Method 502.5 & 507.5, GJB 150.3–1986 & GJB 150.4–1986 |
| Key Features | Microprocessor-based color touchscreen controller with EN/CN language switch |
|---|---|
| Temperature range options | 0 to 150°C, −20 to 150°C, −40 to 150°C, or −70 to 150°C |
| Humidity range | 20–98% RH (optional: 5–98% RH) |
| Temp. uniformity | ±0.5°C |
| Humidity uniformity | ±2.5% RH |
| Temp. fluctuation | ±2°C |
| Humidity fluctuation | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Heating rate | ~4.0°C/min |
| Cooling rate | ~1.0°C/min |
| Standard accessories | Two-tier SUS#304 shelves, four casters + four leveling feet, 2.5 m AC380 V±5%, 50 Hz±0.5 Hz, 3-phase 5-wire power cable |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (approx.) |
| Temperature Range | −20 °C to +80 °C (customizable) |
| Temperature Uniformity | ±2.0 °C |
| Temperature Fluctuation | ±0.5 °C |
| Rainfall Intensity | 25 mm/h |
| Droplet Aperture | Ø0.4 mm |
| Droplet Diameter | 1.0–1.5 mm |
| Ice Accretion Thickness Options | 6 mm, 13 mm, 37 mm, 75 mm |
| Ice Density Range | 0.2–0.9 g/cm³ |
| Water Temperature Control | 0–5 °C |
| Inner Chamber Material | SUS304 Stainless Steel |
| Outer Chamber Material | Galvanized Steel with Powder Coating or Optional SUS304 |
| Controller | 5.7″ TFT Color LCD Touchscreen (Bilingual: English/Chinese) |
| Refrigeration System | Hermetically Sealed Compressor (Tecumseh, France) |
| Heating System | Spiral Nichrome Heater with Ceramic Insulation Mounts |
| Humidification | Embedded Nichrome Electric Humidifier |
| Power Supply | AC 220 V ±5%, 50 Hz ±0.5 Hz, Single-Phase Three-Wire |
| Ambient Operating Conditions | 5–35 °C, RH ≤85% |
| Internal Dimensions (L×W×H, mm) | 500×600×500 / 600×700×600 / 800×900×700 / 1000×1000×1000 |
| External Dimensions (L×W×H, mm) | 1000×1750×1100 / 1100×1900×1100 / 1300×1900×1300 / 1500×2000×1600 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Engineered (OK-TH Series) |
| Price | USD 2,650–12,800 (FOB, based on configuration) |
| Internal Volume Range | 80 L to 1000 L |
| Temperature Range Options | 0°C to +150°C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Temp. Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temp. Stability | ±2.0°C |
| Humidity Stability | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Ramp Rates | Heating ~4.0°C/min |
| Construction | Interior & Exterior — SUS#304 Stainless Steel |
| Viewing Window | Multi-layer tempered glass with conductive ITO film |
| Test Port | One Ø50 mm port (left side), sealed with silicone gasket |
| Safety | Dual-stage over-temperature/over-humidity protection, real-time fault logging, automatic power cutoff |
| Compliance | MIL-STD-810G Method 501.6 / 502.6 / 507.5 |
| Temperature Range | -40 °C to +100 °C |
|---|---|
| Humidity Range | 20–98 %RH (optional down to 5 %RH) |
| Temperature Uniformity | ≤ ±0.5 °C |
| Temperature Deviation | ≤ ±2 °C |
| Humidity Deviation | +2 to –3 %RH |
| Ramp Rate | 0.5–1.2 °C/min |
| Control System | Microprocessor-based PID + SSR + Timer |
| Compliance | IEC 60068-2, ISO 16750-4, ASTM D4332, GB/T 2423.1/2/3/4 |
| Refrigerant | R404A/R507 (ODP = 0, compliant with EU F-Gas Regulation) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 11,200 (approx. ¥80,000) |
| Temperature Range | −40 °C to +150 °C |
| Temperature Accuracy | ±0.5 °C |
| Temperature Uniformity | ±1.5 °C |
| Heating Rate (no-load, avg.) | 3 °C/min |
| Cooling Rate (no-load, avg.) | 1 °C/min |
| Internal Dimensions | 400 × 400 × 500 mm (W × H × D) |
| External Dimensions | 900 × 1400 × 900 mm (W × H × D) |
| Inner Chamber Material | SUS304 Stainless Steel (Grade 1) |
| Outer Casing | Brushed Stainless Steel with Matte Grain Finish |
| Insulation | High-Density Glass Wool (≥100 mm thickness) |
| Control System | PID + SSR/SCR Dual-Directional Temperature & Humidity Controller with RS-232C / RS-485 Interface |
| Safety Protections | Over-Temperature Cut-off, Phase Failure & Reverse-Phase Detection, Compressor High-Pressure & Overheat Protection, Motor Overcurrent Relay, Ceramic Fast-Blow Fuse, Full-Sheathed Terminal Blocks, Audible Alarm |
| Brand | OEM / Private Label |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| External Dimensions (W×H×D) | 100×165×100 cm to 180×200×180 cm |
| Temperature Range | -70 °C to +150 °C (configurable in four standard tiers) |
| Humidity Range | 20–98 %RH (optional extension to 5–98 %RH) |
| Temperature Uniformity | ±0.5 °C |
| Humidity Uniformity | ±2.5 %RH |
| Temperature Fluctuation | ±2 °C |
| Humidity Fluctuation | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | Heating ≈4.0 °C/min |
| Refrigeration System | Hermetic dual-stage compressor with eco-friendly R404A/R23 refrigerant blend |
| Control Interface | Full-color LCD touchscreen controller with bilingual (English/Chinese) UI |
| Construction Material | Interior & exterior panels — AISI 304 stainless steel |
| Viewing Window | Multi-layer laminated tempered glass with conductive ITO film for anti-fog observation |
| Test Port | One Ø50 mm pass-through port (left side) |
| Standard Accessories | Two-tier 304 stainless steel shelves, four swivel casters with leveling feet, 2.5 m power cord (3-phase 5-wire, AC 380 V ±5 %, 50 Hz ±0.5 Hz) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | 0°C to 80°C (Standard) |
| Optional Low-Temp Models | −20°C, −40°C, or −60°C |
| Humidity Range | 20–98% RH (Custom Options: 5–98% RH, 10–98% RH, or 20–98% RH) |
| Control System | Microprocessor-Based PID + SSR + Timer |
| Safety Protections | Compressor Overheat/Overcurrent/High-Pressure Protection, Condenser Fan Overheat, Oil Pressure Monitoring, Phase Sequence & Phase Loss Detection, Earth Leakage Protection, Dry-Heating Prevention, Overload & Short-Circuit Protection, Overtemperature Cut-off, Sample Power Interface: Relay-Controlled AC220V ≤2A |
| Data Logging | PC Connectivity Supported (Optional External Recorder) |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Configurable |
| Price | USD 2,650 (FOB) |
| Internal Dimensions (W×H×D) | 40×50×40 cm to 100×100×100 cm |
| Temperature Range | −70 °C to +150 °C (selectable sub-ranges A–D) |
| Humidity Range | 20–98 %RH (optional 5–98 %RH) |
| Temp. Uniformity | ±0.5 °C |
| RH Uniformity | ±2.5 %RH |
| Temp. Stability | ±2 °C |
| RH Stability | +2–3 %RH |
| Resolution | 0.1 °C / 0.1 %RH |
| Ramp Rate | +4.0 °C/min (heat-up), −1.0 °C/min (cool-down) |
| Refrigeration | Hermetic dual-stage compressor with R404A/R23 eco-refrigerant blend |
| Controller | Full-color TFT touch screen, bilingual (English/Chinese) interface |
| Construction | Interior & exterior SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with embedded conductive ITO film |
| Sealing | Dual high-tensile silicone gasket |
| Access Port | One 50 mm diameter test port (left side) |
| Standard Accessories | Two-tier SUS#304 shelves, four casters + leveling feet |
| Power Supply | AC 380 V ±5 %, 50 Hz ±0.5 Hz, 3-phase 5-wire, 2.5 m cable |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Model | Custom-Engineered (OK-TH Series) |
| Price | USD 2,600–12,500 (FOB, based on configuration) |
| Internal Dimensions Range | 40×50×40 cm to 100×100×100 cm |
| Temperature Range Options | 0 to +150°C |
| Humidity Range | 20–98% RH (optional: 5–98% RH or 10–98% RH) |
| Temp. Uniformity | ±0.5°C |
| RH Uniformity | ±2.5% RH |
| Temp. Stability | ±2.0°C |
| RH Stability | +2 to +3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Ramp Rate | Heating ~4.0°C/min |
| Refrigeration System | Hermetic low-noise dual-stage compressor with eco-friendly refrigerants (R404A/R23) |
| Controller | Full-color TFT touchscreen interface with bilingual (English/Chinese) navigation |
| Construction | Interior & exterior chambers fabricated from SUS#304 stainless steel |
| Viewing Window | Multi-layer tempered glass with embedded conductive ITO film for anti-fog observation |
| Sealing | Dual-layer high-tension silicone gasket at door interface |
| Access Port | One Ø50 mm test port (left side), pre-installed with brass gland fitting |
| Safety Systems | Real-time fault detection, over-temperature/over-humidity cutoff, compressor high-pressure protection, phase-sequence monitoring, and emergency power disconnect |
| Key | Controller: Siemens PLC + color LCD touch panel |
|---|---|
| Temp. setpoint accuracy | ±0.1 °C |
| Temp. indication accuracy | ±0.1 °C |
| Sensor | PT100 Ω platinum RTD |
| Heating | independent Ni-Cr alloy resistive heaters |
| Refrigeration | French Tecumseh hermetic air-cooled single-stage or cascade compressor system |
| Air circulation | low-noise HVAC-grade motor with multi-blade centrifugal impeller |
| Internal dimensions | 600 × 500 × 500 mm (W×H×D) |
| External dimensions | 1500 × 2100 × 2250 mm (W×H×D) |
| Construction | SUS304 stainless steel interior & exterior |
| Insulation | high-density glass wool + rigid polyurethane foam |
| Door | single pneumatic-assisted access door |
| Accessories | cryo/heat-resistant silicone packing (−200 °C to +400 °C), dual-zone auto-switching mechanism, two adjustable stainless steel test trays |
| Compliance | Designed per IEC 60068-3-5, ASTM D3418, and ISO 16750-4 environmental stress testing protocols |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Range | USD 14,000–25,000 (FOB) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Ramp Rates | 5–25 °C/min (selectable) |
| Temp. Uniformity | ±2 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0% RH (at ≥75% RH) |
| Humidity Stability | ±2.5% RH |
| Internal Dimensions (W×H×D, cm) | 50×75×60 / 60×85×80 / 100×100×80 / 100×100×100 |
| Test Port | Ø50 mm (left-side, sealed feedthrough) |
| Refrigerant | R507/R23 (zero ODP, low GWP HFC blend) |
| Control System | 7-inch color LCD touchscreen, bilingual (EN/CN), PID auto-tuning, 96 programmable test profiles |
| Safety Protections | Overcurrent, ground fault, compressor high-pressure/overheat, door interlock, over-temperature, leakage current, phase failure detection |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 2423.22–2012, GJB 150.3A–2009, GJB 150.4A–2009, GB/T 10589–2018, GB/T 11158–2012, GB/T 10592–2023 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Model | Custom-Configurable |
| Price | USD 2,600 (approx.) |
| Internal Dimensions (W×H×D, cm) | 40×50×40 to 100×100×100 |
| External Dimensions (W×H×D, cm) | 100×165×100 to 180×200×180 |
| Temperature Range | 0°C to +150°C (Standard) |
| Humidity Range | 20–98% RH (Standard) |
| Temperature Uniformity | ±0.5°C |
| Humidity Uniformity | ±2.5% RH |
| Temperature Fluctuation | ±2.0°C |
| Humidity Fluctuation | +2–3% RH |
| Resolution | 0.1°C / 0.1% RH |
| Ramp Rate | Heating ~4.0°C/min |
| Refrigeration System | Hermetic, Low-Noise Dual-Stage Compressor with Eco-Friendly Refrigerants (R404A/R23) |
| Controller | Color Touchscreen LCD with English/Chinese Interface |
| Construction Material | SUS#304 Stainless Steel (Interior & Exterior) |
| Viewing Window | Multi-Layer Tempered Glass with Conductive Film |
| Test Port | One Ø50 mm Port (Left Side) |
| Safety Protection | Real-Time Fault Detection, Auto Power Cut-off, Over-Temperature/Humidity/Pressure Alarms |