Environmental Test Chamber
Filter
Showing 1891–1920 of 2009 results
| Key | Brand: OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Compliance | GB/T 2423.1–2, IEC 60068-2-1, IEC 60068-2-2, ISO 16750-4 |
| Interior Dimensions | Customizable (Typical Range: W2000 × D2000 × H2200 mm) |
| Construction | Sandwich Panel with Polyurethane Foam Insulation (≥100 mm thick) |
| Inner Wall Material | SUS304 Stainless Steel |
| Outer Cladding | Pre-painted Galvanized Steel or Color-Coated Steel |
| Floor Load Capacity | 500 kg/m² (uniformly distributed) |
| Door | Single Swing, W800 × H1800 mm, Triple-Layer Vacuum Insulated Window (450 × 340 × 40 mm) |
| Air Circulation | Top-Mounted Forced Convection System with SIROCCO Fans & Extended-Shaft AC Motors (1.5 HP, 380 V/3-phase) |
| Controller | TEMI 880 Touchscreen PID Controller (5.7″ or 10.4″ LCD, 320×240 resolution, bilingual UI, 100 programs × 1000 segments, segment duration up to 99h59m, loop count up to 999, multi-zone PID tuning) |
| Refrigeration | Dual-Stage Cascade System (Low-stage: R404A |
| High-stage | R23) |
| Compressor | Bitzer or Tecumseh Hermetic/Semi-Hermetic Units |
| Key Components | Danfoss TXV & Pressure Switches, Castel Solenoid Valves, Alco Oil Separators, Parker Filters |
| Safety Protections | Ground Fault Detection, Phase Failure & Undervoltage Protection, Chamber Overtemperature Cut-off, Compressor High/Low Pressure Shutdown, Oil Pressure Monitoring, Heater Overload & Short-Circuit Protection, Leak Current Protection, Water Level Sensing (for Humidity Models) |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range | 0°C to 150°C |
| Humidity Range | 20–98% RH (at 25–80°C) |
| Temperature Uniformity | ±2°C (unloaded) |
| Temperature Fluctuation | ±0.5°C (unloaded) |
| Heating Rate | 1.0–3.0°C/min |
| Cooling Rate | 0.7–1.0°C/min |
| Humidity Deviation | +2 / −3% RH |
| Timer Range | 1–9999 hours |
| Chamber Models | OK-STH-100 (45×45×50 cm), OK-STH-225 (50×60×75 cm), OK-STH-500 (80×70×90 cm), OK-STH-800 (80×100×100 cm), OK-STH-1000 (100×100×100 cm) |
| Key | Temperature Range: -60°C to 100°C (selectable variants: -35°C/–20°C to 100°C) |
|---|---|
| Humidity Range | 15–95% RH |
| Temperature Stability | ±0.5°C |
| Humidity Stability | ±2% RH |
| Temperature Uniformity | ±2°C |
| Humidity Uniformity | ±3% RH |
| Temperature/Humidity Deviation | ≤±2°C / ≤±3% RH |
| Refrigerant | HFC-404A & HFC-23 (zero ozone depletion potential) |
| Construction | Modular PU-insulated panels |
| Inner Chamber | SUS304 stainless steel |
| Outer Shell | Color-coated steel |
| Heating | Stainless finned-tube electric heaters |
| Humidification | Stainless-steel sheathed steam generator |
| Airflow Design | Ceiling-mounted low-velocity discharge for high uniformity and minimal sample disturbance |
| Safety | Overload protection, compressor overheat/overcurrent/overpressure protection, dry-run and low-water alarms, power failure memory |
| Controller | Large LED-based multi-function programmable controller |
| Standard Port | One φ50 mm test port |
| Lighting | Explosion-proof interior lamp |
| Power Supply | AC 3-phase 5-wire 380 V / 50 Hz |
| Compliance | GB/T 5170.2–1996, GB/T 10592–1993, GB/T 2423.2–2008 (IEC 60068-2-2), GJB 150.3–2009, GJB 150.4–2009, GJB 360B–2009 |
| Brand | OEM / Custom Brand |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -70 °C to +150 °C |
| Humidity Range | 30–98 %RH |
| Temperature Uniformity | ±0.5 °C |
| Temperature Deviation | ≤2 °C |
| Humidity Deviation | +2 to –3 %RH |
| Ramp Rate | 0.7–1.0 °C/min |
| Control Accuracy | ±0.1 °C (PID, 0.1-class) |
| Display | Korean-made TFT Touchscreen LCD |
| Interface | RS485/RS232, Ethernet (optional) |
| Programming Capacity | Up to 1000 segments, 999 cycles |
| Compliance | Designed per IEC 60068-2, ISO 16750-4, ASTM D4332, MIL-STD-810H (environmental conditioning) |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | −70 °C to +120 °C |
| Humidity Range | 10–98% RH |
| Control System | PLC-based with LCD touch interface (English/Chinese) |
| Sensor | Platinum RTD (PT-100, Class A) |
| Interface | RS-232C / RS-485 |
| Construction | Sandwich-panel design with pre-painted outer skin, SUS304 stainless steel inner chamber, and high-efficiency glass fiber insulation |
| Door Options | Hinged, sliding, swing, or motorized |
| Compliance | Designed to support ASTM D4332, ISO 6270, IEC 60068-2 series, and GLP/GMP-aligned validation protocols |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | −40°C to +150°C |
| Humidity Range | 20%–98% RH |
| Internal Dimensions (L×W×H, mm) | 450×450×500 to 1000×1000×1000 |
| External Dimensions (L×W×H, mm) | 1150×900×1650 to 1650×1480×2300 |
| Uniformity (Temp/Humidity) | ±1.0°C / ±3.0% RH (per GB 5170.18) |
| Compliance | GB/T 2423.1–2023, GB/T 2423.2–2023, GB/T 2423.3–2016, GB/T 5170.18–2017 |
| Key | Temperature Range: -60°C to 100°C (selectable variants: -35°C/–20°C to 100°C) |
|---|---|
| Humidity Range | 15–95% RH (standard: 20–95% RH) |
| Temperature Stability | ±0.5°C |
| Humidity Stability | ±2% RH |
| Temperature Uniformity | ±2°C |
| Humidity Uniformity | ±3% RH |
| Temp/Humidity Deviation | ≤±2°C / ±3% RH |
| Refrigerant | R404A & R23 (zero-ozone-depletion HFC blend) |
| Construction | Modular PU-insulated walk-in panels (inner: SUS304 stainless steel |
| outer | color-coated steel) |
| Air Distribution | Ceiling-mounted low-velocity laminar airflow system |
| Control System | Large LED multifunctional controller with expandable I/O |
| Compliance | GB/T 5170.2–1996, GB/T 2423.2–2008 (IEC 60068-2-2), GJB 150.3–2009, GJB 150.4–2009, GJB 360.8–1987 |
| Safety | Overcurrent protection, compressor overheat/overpressure cutoff, dry-heater/steam-generator burnout prevention, low-water alarm, explosion-proof interior lighting, power-fail memory retention |
| Power Supply | AC 3φ 5W 380 V / 50 Hz |
| Optional | Data logging interface, RS485/RS232 or Ethernet connectivity for remote monitoring |
| Key | Brand: Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 12,500 (FOB) |
| Temperature Range | −40 °C to +100 °C |
| Humidity Range | 30–98 %RH |
| Temp. Uniformity | ±0.5 °C |
| Temp. Deviation | ≤2 °C |
| Humidity Deviation | +2 to −3 %RH |
| Ramp Rate | 0.5–1.2 °C/min |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Temperature Range | -20°C to +150°C / -40°C to +150°C / -60°C to +150°C / -70°C to +150°C |
| Temperature Uniformity | ≤ ±2.0°C (optional down to ±0.5°C) |
| Temperature Stability | ≤ ±0.5°C (optional down to ±0.1°C) |
| Humidity Range | 30–98% RH (customizable) |
| Humidity Accuracy | +2% / –3% RH |
| Heating Rate | 2–3°C/min (up to ≥10°C/min optional) |
| Cooling Rate | 0.7–1.0°C/min (up to ≥10°C/min optional) |
| Noise Level | ≤65 dB(A) |
| Refrigeration System | Single-stage hermetic compressor (Tecumseh/Tecumseh-certified) |
| Control System | PID self-tuning controller with Pt100 RTD sensors |
| Compliance | Designed per IEC 60068-2, ASTM D4332, MIL-STD-810H (environmental test methods), GLP/GMP-ready data logging |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 11,200 (approx. based on ¥80,000 at 1 USD = ¥7.15) |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price Reference | USD 3,100 (ex-factory, FOB Shanghai |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 11,200 (FOB) |
| Chamber Volume Options | 80 L / 150 L / 225 L / 408 L / 800 L / 1000 L |
| Internal Dimensions (W×D×H, mm) | 400×500×400 to 1000×1000×1000 |
| External Dimensions (W×D×H, mm) | 1200×1650×1150 to 1900×2100×1850 |
| Temperature Range | Ambient +10°C to +150°C (standard) |
| Humidity Range | 20–98% RH (with humidification system) |
| Control System | Korean-made 7-inch TFT LCD touchscreen controller with PID algorithm |
| Power Supply | 3-phase 380–400 V AC ±10%, 50 Hz |
| Total Rated Power | 4.5 kW |
| Standard Features | Double-layer electrically heated observation window (220×300 mm), stainless steel sample racks (2 pcs), desiccant-based anti-condensation duct, dry/wet bulb humidity sensing, RS232-C interface, solid-state relay heating, hermetic refrigeration circuit, left-side 50 mm diameter cable port with thermal isolation and silicone rubber gasket, safety interlock door latch mechanism |
| Brand | OK Instrumentation |
|---|---|
| Model | OK-STH Series |
| Type | Walk-in Environmental Stress Screening (ESS) Chamber |
| Temperature Range | 0°C to +200°C |
| Humidity Range | 30–98% RH |
| Temp. Uniformity | ≤ ±2.0°C (empty chamber) |
| Humidity Uniformity | ≤ ±3.0% RH (empty chamber) |
| Temp. Stability | ≤ ±0.5°C |
| Humidity Stability | ≤ ±1.0% RH |
| Internal Dimensions (W×D×H) | 600 × 600 × 800 mm |
| Construction | Interior – AISI 304 mirror-finish stainless steel |
| Refrigeration System | Hermetically sealed Tecumseh (France) compressor, R502 refrigerant, Danfoss expansion valve, Alco filter-drier, Castel solenoid valve |
| Heating | Stainless steel finned-tube heaters |
| Humidification | Surface-evaporation shallow-tray system with stainless steel heating elements |
| Control System | uPLC-based controller with HMI interface (keyboard/display or PC/software options) |
| Compliance | GB/T 2423.1–2423.4, IEC 60068-2-1/2/3/30, MIL-STD-810D (GJB150.3/4/9), GJB 367.2, GB 10592, GB 10586, GB/T 5170.2/5 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,500 (FOB) |
| Compliance Standards | MIL-STD-810G Method 506.6 (replaces GJB150.8), IEC 60529 IPX1–IPX6, ISO 20653:2013, GB/T 4208–2017, GB/T 2423.38–2008, IEC 60068-2-68, GB/T 4942.1–2006, IEC 60034-5 |
| Brand | OEM / Custom Manufacturer |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,500 (FOB) |
| Construction | Stainless Steel (SUS304) Inner Chamber + A3 Steel Outer Casing (t=1.2 mm) |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Turntable | PVC Hardboard Platform |
| Water Contact Components | 304 Stainless Steel or Copper |
| Nozzle System | Precision German-Made High-Pressure Spray Nozzles with Adjustable Angle & Auto-Leveling Water Surface |
| Filtration | Dual-Stage Water Purification System |
| Control Options | Programmable Logic Controller (PLC) or Touchscreen HMI (Full-Color, User-Configurable Profiles) |
| Standards Compliance | MIL-STD-810G Method 506.6, IEC 60529 (IPX1–IPX9K), ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8, IEC 60068-2-68, GB/T 4942.1, IEC 60034-5 |
| Brand | OEM / Custom Brand Available |
|---|---|
| Origin | Imported |
| Supplier Type | Authorized Distributor |
| Price | USD 3,500 (FOB) |
| Compliance Standards | MIL-STD-810G Method 506.6, IEC 60529 (IPX1–IPX6), ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8, IEC 60068-2-68, GB/T 4942.1, IEC 60034-5 |
| Chamber Interior Material | SUS304 Stainless Steel |
| Insulation | Rigid Polyurethane Foam + Glass Fiber |
| Turntable Surface | PVC Hardboard (Corrosion-Resistant) |
| Water Contact Components | 304 Stainless Steel or Brass |
| Water Filtration | Dual-Stage Particulate Filter System |
| Nozzle Type | Adjustable-Angle Precision Spray Nozzles (Non-Diffusing Jet) |
| Water Level Control | Motorized Auto-Adjustable Immersion Height |
| Heating | Electric Immersion Heater with PID Temperature Regulation |
| Pump | High-Pressure Stainless Steel Centrifugal Pump |
| Viewing Window | Tempered Safety Glass with Anti-Fog Coating |
| Control System | Optional — Basic Programmable Logic Controller (PLC) or Full-Color TFT Touch HMI with Data Logging & USB Export |
| Brand | OEM / Custom-Built |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | –40 °C to +150 °C (optional down to –120 °C) |
| Humidity Range | 30–98% RH (optional 5–98% RH) |
| Temperature Resolution | 0.01 °C |
| Humidity Resolution | 0.1% RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Deviation | ±2.5% RH |
| Cooling Rate | 0.7–1.0 °C/min |
| Heating Rate | 2.0–3.0 °C/min |
| Control System | TEMI880 Color LCD Touchscreen Controller |
| Power Supply | 380 V ±5%, 50 Hz, 3P+N+G |
| Cooling Water Requirements | 10–28 °C, 0.1–0.3 MPa |
| Internal Chamber Material | SUS304 Stainless Steel |
| External Casing | SUS304 Stainless Steel or Powder-Coated A3 Steel |
| (在此处输出精准翻译� | �纯英文产品名称。极其重要：仅输出一行名称，严禁输出备选名、严禁换行重复、严禁包含任何中文字符) |
|---|---|
| [Brand | Other Brands |
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | -60°C to +80°C (selectable low-temp options: 0°C, -20°C, -40°C, -60°C) |
| Humidity Range | 20–98% RH (optional extended ranges: 5–98%, 10–98%, 20–98% RH) |
| Control System | Microprocessor-based PID + SSR + Timer |
| Compliance | GB/T 2423.1, GB/T 2423.2, GB/T 2423.22, GJB 150.5, GJB 360.7-87, GJB 367.2-87, IEC 60068-2-14, QC/T 17-92, EIA-364-32 |
| Construction | Inner chamber – SUS304B stainless steel |
| Key | Temperature Range: 0°C to 100°C |
|---|---|
| Humidity Range | 30–98% RH |
| Temperature Uniformity | ±0.1°C |
| Humidity Uniformity | ±1% RH |
| Chamber Volume | 2 m³ to 300 m³ |
| Power Supply | AC 380 V (±10%), 50 Hz, 3-phase 5-wire |
| Total Power Consumption | 12 kW |
| Ambient Operating Conditions | 5°C–28°C (24-hr avg ≤28°C), RH ≤85% |
| Compliance | GB/T 10592–2008, GB/T 10586–2012, GB/T 2423.1–2022, GB/T 2423.2–2022, GB/T 2423.3–2016, GB/T 2423.4–2016 |
| Key | Cooling Method: Water-cooled |
|---|---|
| Light Source | Full-spectrum xenon arc lamp |
| Radiation Range | 300–800 nm (550 W/m² ±10%) / 300–1200 nm (1000 W/m² ±10%) |
| Black Panel Temperature Range | 40–85°C |
| Chamber Temperature Range | 0–150°C |
| Humidity Range | 20–75% RH (light cycle), 20–98% RH (dark cycle) |
| Humidity Control Accuracy | ±2.0% RH |
| Temperature Control Accuracy | ±0.5°C |
| Temperature Uniformity | ±2.0°C |
| Humidity Uniformity | ±3.0% RH |
| Spray Duration | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500 mm diameter rotating turntable (0–3 rpm) |
| Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Lifetime | ~1500 h |
| Construction | Interior: SUS304 stainless steel |
| Exterior | SUS34 stainless steel or powder-coated steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Compliance Standards | GB/T 8427, GB/T 16422-2, GB/T 8430, ISO 4892-2, GB/T 14576, ASTM D529, GB/T 15102-2006, GB/T 15104-2006 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 3,500 (FOB) |
| Compliance Standards | MIL-STD-810G Method 512.5, IEC 60529 IPX1–IPX6, ISO 20653, GB/T 4208, GB/T 2423.38, GJB 150.8, IEC 60068-2-68, GB/T 4942.1, IEC 60034-5 |
| Brand | WEISS |
|---|---|
| Origin | Germany |
| Model | WK-Series |
| Chamber Volume Options | 4 m³, 10 m³, 15 m³, 25 m³, 32 m³, 41 m³ |
| Temperature Range | +20 °C to +45 °C |
| Temperature Uniformity | ≤ ±1 °C |
| Humidity Range | 20 % r.H. to 80 % r.H. |
| Humidity Stability (over time) | ≤ ±3 % r.H. |
| Insulation | CFC-free polyurethane (PU) foam |
| Control System | Microprocessor-based, compliant with GAMP 5 and FDA 21 CFR Part 11 |
| Humidification | Ultrasonic |
| Dehumidification | Refrigerant-based |
| Safety Features | Dual independent temperature safety cut-offs, sample temperature monitoring, emergency door release mechanism |
| Brand | WEISS |
|---|---|
| Origin | Germany |
| Model | WK |
| Chamber Volume Options | 4–41 m³ |
| Temperature Range | +20 °C to +45 °C |
| Temperature Uniformity | ≤ ±1 °C |
| Humidity Range | 20–80 % RH |
| Humidity Stability (over time) | ≤ ±3 % RH |
| Insulation | CFC-free polyurethane (PU) |
| Control System | Microprocessor-based, compliant with GAMP 5 and FDA 21 CFR Part 11 |
| Humidification | Ultrasonic |
| Dehumidification | Refrigerant-based |
| Heating | Electric |
| Cooling | Air-cooled refrigeration |
| Safety Features | Dual independent temperature safety cut-offs, sample temperature monitoring, emergency door release |
| Brand | WEISS |
|---|---|
| Origin | Germany |
| Model | WK |
| Chamber Volume Options | 4, 10, 15, 25, 32, 41 m³ |
| Temperature Range | +20 to +45 °C |
| Temperature Uniformity | ≤ ±1 °C |
| Humidity Range | 20–80 %RH |
| Humidity Stability (over time) | ≤ ±3 %RH |
| Insulation | CFC-free polyurethane (PU) |
| Control System | Microprocessor-based, compliant with GAMP 5 and FDA 21 CFR Part 11 |
| Humidification | Ultrasonic |
| Dehumidification | Refrigerant-based |
| Heating | Electric |
| Cooling | Air-cooled refrigeration |
| Safety Features | Dual temperature monitoring, sample temperature protection, emergency door release |
| Brand | WEISS |
|---|---|
| Origin | Germany |
| Model | WK |
| Chamber Volume Options | 4, 10, 15, 25, 32, 41 m³ |
| Temperature Range | +20 to +45 °C |
| Temperature Uniformity | ≤ ±1 °C |
| Humidity Range | 20–80 %RH |
| Humidity Stability (over time) | ≤ ±3 %RH |
| Insulation | CFC-free polyurethane (PU) |
| Control System | Microprocessor-based, compliant with GAMP 5 and FDA 21 CFR Part 11 |
| Humidification | Ultrasonic |
| Dehumidification | Refrigerated |
| Heating | Electric |
| Cooling | Air-cooled refrigeration |
| Safety Features | Dual temperature safety cutoffs, sample temperature monitoring, emergency door release |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Temperature Range | Low Temp Options: +25°C / 0°C / −20°C / −40°C / −60°C / −70°C |
| High Temp Options | 100°C / 150°C |
| Humidity Range | 5–98% RH (optional) |
| Temperature Resolution & Uniformity | 0.1°C / ±2.0°C |
| Humidity Resolution & Uniformity | 0.1% RH / ±3.0% RH |
| Temperature Control Accuracy | ±0.5°C / ±2.5% RH |
| Heating Rate | ~4.0°C/min |
| Cooling Rate | ~1.0°C/min |
| Interior/Exterior Material | SUS304 Stainless Steel |
| Refrigeration System | French Tecumseh Compressor with R404A Eco-Friendly Refrigerant |
| Viewing Window | Double-layered, anti-fog heated tempered glass with LED lighting |
| Controller | Imported LCD touchscreen interface supporting multi-segment programmable ramp/slope and step profiles |
| Structural Features | Rounded ergonomic housing, flat non-reactive door handle, double-gasketed airtight door seal, adjustable stainless steel shelves, external test port for signal/power feedthrough, integrated casters with locking mechanism |
| Optional Functions | External water supply system with automatic condensate recovery, humidity control capability |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,100 (approx.) |
| Temperature Control Accuracy | ±0.5 °C |
| Temperature Resolution | 0.1 °C |
| Pressure Control Accuracy | ±0.15 kg/cm² |
| Temperature Uniformity | ±2.0 % at 100 °C |
| Heating Time | RT to 121 °C in ≤35 min |
| Pressurization Time | 0.0 to 1.00 kg/cm² in ≤35 min |
| Test Duration Range | 0–1000 h |
| Vacuum Pre-treatment | Yes, with HEPA-filtered air intake (<1 µm particle retention) |
| Water Supply Mode | Manual + Automatic (up to 999 h continuous operation) |
| Safety Features | Dual-pressure interlocked door, patented self-sealing gasket, overpressure protection, LIMIT-based fault detection, auto-depressurization at test end, timed drying function |
| Compliance Standards | CNS, ISO 9001/17025 (applicable test methods), JIS C 0045, ASTM D3418, DIN EN 60068-2-66, IEC 60068-2-66, MIL-STD-810H, NACE TM0177, UL 746C, BS EN 60068-2-66 |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 5,200 (Reference Only) |
| Internal Dimensions (D×W×H) | 500 × 760 × 500 mm |
| External Dimensions (D×W×H) | 1020 × 1090 × 1566 mm |
| Temperature Range | 0–80 °C (adjustable) |
| Humidity Range | 65–98% RH (adjustable) |
| Rainfall Duration | 0–9999 min (adjustable) |
| Rainfall Cycle | 1–240 min (interval adjustable) |
| Spectral Range | 290–800 nm |
| Xenon Lamp Total Power | 9.9 kW (rated life: 1600 h) |
| Temperature Control Accuracy | ±0.1 °C (setpoint & display) |
| Humidity Control Accuracy | ±1% RH (setpoint & display) |
| Black Panel Temperature Sensor | Dual-metal thermometric sensor |
| Heating System | Independent Ni-Cr alloy resistive heaters |
| Humidification System | External stainless-steel shallow-surface evaporative humidifier |
| Air Circulation | Low-noise, high-temp-rated centrifugal blower with multi-blade impeller |
| Construction | Exterior — cold-rolled steel with phosphating & electrostatic powder coating OR optional SUS304 brushed stainless steel |
| Standard Accessories | Radiation-resistant quartz viewport (1 pc), Xenon arc lamps (4 pcs) |
| Safety Protections | Leakage current protection, short-circuit interruption, overtemperature cutoff, low-water-level detection, motor thermal overload protection, overcurrent trip, controller power-loss memory |
| Power Supply | AC 380 V ±10%, 50 ±0.5 Hz, 3-phase 5-wire |
| Operating Environment | Ambient 5–30 °C, ≤85% RH |