Environmental Test Chamber
Filter
Showing 1981–2009 of 2009 results
| Brand | OK |
|---|---|
| Model | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Chamber Type | Benchtop to Floor-Standing Xenon Arc Exposure System |
| Light Source | Long-Arc Air-Cooled Xenon Lamp (Full-Spectrum Solar Simulation) |
| Spectral Range | 300–800 nm (550 W/m² ±10%) and 300–1200 nm (1000 W/m² ±10%) |
| Black Panel Temperature Range | 40–85°C |
| Chamber Temperature Range | 0–150°C |
| Humidity Control | 20–75% RH (light cycle), 20–98% RH (dark cycle) |
| Humidity Accuracy | ±2.0% RH |
| Temperature Accuracy | ±0.5°C |
| Uniformity | ±2.0°C (temp), ±3.0% RH (humidity) |
| Irradiance Control | Closed-loop digital feedback with calibrated broadband sensor |
| Water Spray | Programmable intermittent/continuous mode (1–999 min), pressure 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500 mm diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Lamp Life | ~1500 h at rated irradiance |
| Filter System | Precision daylight-filtered quartz envelope for stable CIE standard solar spectrum replication |
| Compliance | ASTM G155, ISO 4892-2, GB/T 16422.2, GB/T 8427, GB/T 8430, GB/T 14576, GB/T 15102–2006, GB/T 15104–2006, AATCC TM16, JIS D 0205 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (Reference Only) |
| Chamber Models | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Internal Dimensions (W×D×H, cm) | 50×50×40 / 50×75×60 / 80×80×80 / 100×100×100 |
| Temperature Range | 0–150°C (Chamber), 40–85°C (Black Panel) |
| Humidity Range | 20–75% RH (Light Cycle), 20–98% RH (Dark Cycle) |
| Control Accuracy | ±0.5°C / ±2.0% RH |
| Uniformity | ±2.0°C / ±3.0% RH |
| Spectral Range | 300–800 nm (550 W/m² ±10%) and 300–1200 nm (1000 W/m² ±10%) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ~1,500 h |
| Water Spray Duration | 1–999 min (Intermittent or Continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500-mm-diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (Reference Only) |
| Chamber Models | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Internal Dimensions (W×D×H, cm) | 50×50×40 / 50×75×60 / 80×80×80 / 100×100×100 |
| Temperature Range | 0–150°C (Chamber), 40–85°C (Black Panel) |
| Humidity Range | 20–75% RH (Light Cycle), 20–98% RH (Dark Cycle) |
| Control Accuracy | ±0.5°C / ±2.0% RH |
| Uniformity | ±2.0°C / ±3.0% RH |
| Spectral Range | 300–800 nm (550 W/m² ±10%) and 300–1200 nm (1000 W/m² ±10%) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ~1,500 h |
| Spray Duration | 1–999 min (intermittent or continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Mounting | Dual-layer flat mesh rack or 500 mm diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | +10°C to +70°C |
| Humidity Range | ≥95% RH |
| Internal Chamber Dimensions (W×H×D) | 1000 × 1000 × 1000 mm |
| External Dimensions (W×H×D) | 1650 × 2100 × 1500 mm |
| Sample Holder Capacity | 75 × 150 mm (Standard) |
| Chamber Construction | SUS304 Stainless Steel Interior, Cold-Rolled Steel Exterior with Phosphating & Baking Finish |
| Irradiance Control | Adjustable Sample Height for Uniformity Compliance per GB/T 19394–2003 (±15%) |
| Optical Filter | Low-Iron Tempered Glass (5 mm) |
| Reflector Material | High-Purity Aluminum Oxide Plate |
| Circulation Pump | Magnetic Drive Circulating Pump |
| Controller | Fuji Electric PID Temperature Controller, Moeller Programmable Logic Controller (PLC) |
| Sensor | PT100 Platinum Resistance Thermometer |
| Temperature Resolution | 0.1°C |
| Protection Functions | Over-Temperature Protection, Phase-Loss Protection |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Internal Dimensions (W×D×H) | 1000 × 1000 × 1000 mm |
| External Dimensions (W×D×H) | 1850 × 1350 × 1550 mm |
| UV-A Spectral Range | 320–380 nm |
| Irradiance Control Range | 0.7 W/m² @ 340 nm (adjustable) |
| Humidity Range (Irradiation Mode) | 45–80% RH |
| Condensation Humidity | ≥95% RH |
| Condensation Temperature Range | 40–60°C (±3°C tolerance) |
| Light Exposure Temperature Range | 50–60°C (±3°C tolerance) |
| Black Panel Temperature Range | 30–60°C (±1°C tolerance) |
| Temperature Resolution | 0.1°C |
| Water Tray Depth | ≤30 mm with Auto-Water Supply Control |
| Irradiance Measurement | Fixed-position UV radiometer with high-accuracy digital display |
| Cycle Programming | Independent and combined irradiation/condensation cycles, programmable up to 999 hours per segment |
| Electrical Components | Schneider (France) control modules |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Radiation Intensity | ≤50 W/m² (per GB/T 19394–2003, Clause 5) |
| Temperature Range | 40–70 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Chamber Dimensions (W×D×H) | 1000 × 1000 × 1000 mm |
| Xenon Lamp Quantity | 4 pcs |
| Lamp Power | 40 W each |
| Black Panel Thermometer | Aluminum substrate |
| Sample Mounting Options | Rotating turntable or stainless steel shelf (user-selectable) |
| UV Spectral Options | UV-A (295–360 nm) or UV-B (280–315 nm) |
| Control System | TEMI-880 16-bit true-color touchscreen, 100 programmable profiles × 100 segments/profile, PID temperature regulation with overshoot suppression |
| Communication Interface | RS-485 for remote PC-based monitoring and control |
| Spray Nozzle | 1 unit |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Temperature Range | −70 °C to +100 °C |
| Humidity Range | 10–98% RH |
| Humidity Uniformity | ±3% RH |
| Temperature Uniformity | ±2 °C |
| Rainfall Duration | 0–9999 min (continuous) |
| Rainfall Cycle | 0–240 min (intermittent) |
| Xenon Lamp Power | 6 kW ±5% |
| Spectral Range | 290–400 nm |
| Irradiance Control | 0.35–0.65 W/m²/nm @ 340 nm |
| Sample Rack Rotation | 1 rpm, 360° |
| Lamp-to-Sample Distance | 300–375 mm |
| Refrigerant | R404A |
| Cooling System | Air-cooled, hermetic French Tecumseh compressor |
| Humidity Control | Direct steam injection + dew-point contact dehumidification |
| Compliance | ASTM G155, ISO 4892-2, SAE J2527, SAE J2412, GB/T 16422.2, GB/T 1865, IEC 60068-2-5 |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Chamber Dimensions (W×H×D) | 500 × 700 × 600 mm |
| External Dimensions | Custom-Fit Enclosure |
| Total Power Consumption | 9 kW |
| Lamp Configuration | Single Air-Cooled 1.8 kW Xenon Arc Lamp |
| Spectral Range | 290–800 nm |
| Irradiance (290–800 nm) | 550 W/m² |
| Black Panel Temperature Range | 63 °C / 100 °C (selectable) |
| Temperature Range | RT to +80 °C |
| Temp. Uniformity | ±2.0 °C |
| Temp. Stability | ±0.5 °C |
| Humidity Range | 45–90 %RH |
| Humidity Control Accuracy | ≤ ±2 %RH |
| Water Spray Nozzle Diameter | Ø0.8 mm |
| Spray Duration | 0–9999 min (continuous) |
| Spray Cycle Interval | 0–240 min (intermittent) |
| Sample Rack Distance from Lamp | 230–280 mm |
| Heating Power | 3 kW |
| Humidification Power | 1.5 kW |
| Filter | Single Borosilicate Glass Daylight Filter |
| Brand | OEM |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Price | USD 5,300 (Reference Only) |
| Chamber Models | OK-XD-100 / OK-XD-225 / OK-XD-500 / OK-XD-1000 |
| Internal Dimensions (W×D×H, cm) | 50×50×40 / 50×75×60 / 80×80×80 / 100×100×100 |
| Temperature Range | 0–150°C (Chamber), 40–85°C (Black Panel) |
| Humidity Range | 20–75% RH (Light Cycle), 20–98% RH (Dark Cycle) |
| Control Accuracy | ±0.5°C / ±2.0% RH |
| Uniformity | ±2.0°C / ±3.0% RH |
| Spectral Range | 300–800 nm (550 W/m² ±10%), 300–1200 nm (1000 W/m² ±10%) |
| Xenon Lamp Power | 1.8 kW / 2.5 kW / 6 kW |
| Lamp Life | ~1500 h |
| Spray Duration | 1–999 min (Intermittent or Continuous) |
| Spray Pressure | 70–127 kPa |
| Sample Holder | Dual-layer mesh tray or 500 mm diameter rotating turntable (0–3 rpm) |
| Construction | Interior – SUS304 stainless steel |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 5,300 (approx.) |
| [Working Chamber | 400 × 1100 × 400 mm (D×W×H) |
|---|---|
| External Dimensions | 850 × 1330 × 1000 mm (D×W×H) |
| UV-A Spectral Range | 320–380 nm |
| Irradiance Control | Adjustable up to 0.7 W/m² @ 340 nm |
| Humidity Range (Irradiation Phase) | 45–80 %RH |
| Condensation Humidity | ≥95 %RH |
| Condensation Temperature | 40–60 °C (±3 °C tolerance) |
| Light Exposure Temperature | 50–60 °C (±3 °C tolerance) |
| Black Panel Temperature Range | 30–60 °C (±1 °C tolerance) |
| Temperature Resolution | 0.1 °C |
| Water Tray Depth | ≤30 mm with Auto-Fill Control |
| Control Logic | Independent & Cyclic Programmable Irradiation/Condensation Phases (up to 999 h per segment)] |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | Authorized Distributor |
| Irradiance | ≤50 W/m² (per GB/T 19394–2003, Clause 5) |
| Chamber Dimensions (W×D×H) | 1000 × 1000 × 1000 mm |
| Temperature Range | 40–70 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Xenon Lamps | 4 pcs × 40 W |
| Spray Nozzle | 1 unit |
| Black Panel Thermometer | Aluminum substrate |
| Sample Mounting | Rotating turntable or stainless-steel static rack (user-selectable) |
| UV Filter Options | UV-A (295–360 nm) or UV-B (280–315 nm) |
| Brand | YAMATO |
|---|---|
| Origin | Japan |
| Model | DKN313C |
| Instrument Type | Benchtop |
| Temperature Range | Ambient +10°C to 260°C |
| Temperature Uniformity | ±1.0°C (at setpoint) |
| Temperature Fluctuation | ±0.5°C |
| Heating Rate | ~60 min (from ambient to 210°C) |
| Chamber Volume | 27 L |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 14,000 (Reference Only) |
| Temperature Range | −70 °C to +150 °C |
| Humidity Range | 20–98% RH (optional: 5–98% RH) |
| Rapid TC Range | −45 °C to +85 °C or −20 °C to +85 °C |
| Ramp Rates | 5–25 °C/min (customizable) |
| Temperature Uniformity | ±2 °C |
| Temperature Stability | ±0.5 °C |
| Humidity Uniformity | ±3.0% RH (at ≥75% RH) |
| Humidity Stability | ±2.5% RH |
| Interior Material | SUS#304 Stainless Steel |
| Refrigeration System | Hermetic Dual-Stage Compressor with Eco-Friendly Refrigerants (R404A/R23) |
| Controller | Touchscreen LCD with English/Chinese Interface |
| Power Supply | AC 380 V ±5%, 50 Hz ±0.5 Hz, 3-Phase 5-Wire |
| Brand | Yi Heng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Model | BPH Series / BPHJ Series |
| Temperature Range | −20 °C to 130 °C (A), −40 °C to 130 °C (B), −60 °C to 130 °C (C) |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Refrigerant | R134a (non-ozone-depleting) |
| Internal Chamber Material | AISI 304 mirror-finish stainless steel |
| Control System | Microprocessor-based digital controller (BPH) or 7-inch color TFT touchscreen with programmable logic (BPHJ) |
| Programmability | Up to 120 programs × 99 segments × 999 cycles |
| Communication Interface | RS-232 / RS-485 standard |
| Safety Protections | Independent over-temperature cut-off, compressor overheat/overcurrent/overload protection, fan overheat protection, dual-stage temperature deviation alarms |
| Brand | YiHeng (Shanghai Yi Heng) |
|---|---|
| Origin | Shanghai, China |
| Model | BPHJS Series |
| Temperature Range | −60 °C to +130 °C |
| Humidity Range | 30–95 %RH |
| Temperature Uniformity | ±2 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Fluctuation | ±3 %RH |
| Refrigerant | R134a (ozone-friendly) |
| Inner Chamber Material | AISI 304 mirror-finish stainless steel |
| Control System | Color TFT touchscreen with programmable logic (120 programs × 99 segments, up to 999 cycles) |
| Communication Interface | RS-232/RS-485, USB data export (SD card), optional 485 printer interface |
| Safety Protections | Independent over-temperature cutoff, compressor overheat/overcurrent/overload protection, fan overheat protection, low-water alarm |
| Power Supply | AC 380 V, 50 Hz (models with −40 °C or −60 °C capability) |
| Brand | YiHeng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region Category | Domestic (China) |
| Model | LHS Series |
| Price Range | USD 3,300 – 10,500 (FOB Shanghai) |
| Instrument Type | Vertical Chamber |
| Temperature Range | Type I: −5 to 80°C |
| Type II | −10 to 70°C |
| Humidity Range | Type I: 40–85% RH |
| Type II | 40–95% RH |
| Temperature Uniformity | ±0.5°C (high-temp), ±1.0°C (low-temp) |
| Humidity Deviation | ±3% RH |
| Heating Rate | 1.0–3.0°C/min |
| Internal Chamber Dimensions | See Technical Datasheet |
| Brand | Yoyi |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | GDW-225L(A/B/C) |
| Temperature Range | A: −20 °C to 150 °C |
| B | −40 °C to 150 °C |
| C | −60 °C to 150 °C |
| Humidity Range | 20–98% RH |
| Humidity Deviation | ±3–5% RH |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2 °C |
| Temperature Resolution | 0.1 °C |
| Heating Method | Nickel-Chromium Alloy Heater |
| Refrigeration System | Hermetic Imported Compressor with Eco-Friendly Refrigerant (R404A/R23) |
| Control System | TEMI PID-Based Intelligent Controller |
| Programmability | 100-Stage Multi-Segment Program |
| Power Supply | AC380V 50Hz |
| Internal Volume | 225 L |
| Internal Dimensions (W×D×H) | 600×500×750 mm |
| External Dimensions (W×D×H) | 1115×1085×1885 mm |
| Standard Accessories | 2 Fixed + 10 Adjustable 304 Stainless Steel Shelves, Left-Side Test Port, Triple-Layer Insulated Observation Window with Defrosting & Illumination, Silicone Door Seal, RS485/USB Interface (Optional) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-XXW-SD Series |
| Price Range | USD 28,000 – 70,000 (FOB) |
| Internal Dimensions (D×W×H) | Customizable per client specification |
| Temperature Range | 20–50 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Heating Rate | 0.5 °C/min (customizable) |
| Humidity Range | 50–90 % RH |
| Humidity Uniformity | ±3 % RH |
| Power Supply | 220 V / 50 Hz |
| Data Storage | 64 MB internal cyclic memory + SD card export + optional real-time PC logging via RS485 |
| Remote Monitoring | Supported via Sims software over LAN/internet (up to 30 units per host) |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Origin | Domestic (China) |
| Model | SHH-XXW-SD Series |
| Price Range | USD 28,000 – 70,000 (FOB) |
| Internal Dimensions (D×W×H) | Custom-engineered per client specification |
| Temperature Range | 20–50 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Control Accuracy | ±0.5 °C |
| Heating Rate | 0.5 °C/min (adjustable per configuration) |
| Humidity Range | 50–90 % RH |
| Humidity Uniformity | ±3 % RH |
| Power Supply | 220 V / 50 Hz |
| Brand | Yuelian |
|---|---|
| Origin | Guangdong, China |
| Model | YL-2231 |
| Temperature Range (High/Low Zones) | +60°C to +200°C / −10°C to −70°C |
| Shock Transition Time (2-tank mode) | ≤5 min (RT to −65°C or RT to +150°C) |
| Temperature Uniformity | ±2.00°C |
| Internal Chamber Material | SUS#304 Stainless Steel |
| Refrigeration System | Dual-stage cascade refrigeration with eco-friendly refrigerant |
| Control System | OYO-8226 PID controller with 320×240 LCD interface |
| Programmable Cycles | Up to 9999 cycles |
| Data Interface | RS-232 with PC software support |
| Power Supply | AC 3φ 380 V, 50 Hz |
| Cooling Method | Water-cooled |
| Brand | Other Brands |
|---|---|
| Origin | Imported |
| Manufacturer Type | General Distributor |
| Price | USD 4,050 (approx.) |
| Chamber Dimensions | Ø300 mm × L500 mm (cylindrical) |
| Inner Tank Material | SUS316 stainless steel (3 mm thick) |
| Outer Casing Material | SUS316 stainless steel (1 mm thick) |
| Insulation | Rock wool + rigid polyurethane foam |
| Heating Element | Finned-tube seamless stainless steel electric heater with platinum-plated surface |
| Safety Systems | Fuseless circuit breaker, over-temperature limiter, ceramic E-16 fast-acting fuse, compressor high/low-pressure and overheat protection, short-term water shortage alarm + long-term water shortage auto-shutdown, zero-crossing thyristor-based temperature/humidity power controller |
| Air Circulation | Multi-wing centrifugal fan with sealed motor |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (China) |
| Model | ZLHS-150-CY |
| Price | USD 5,400 (FOB Shanghai) |
| Internal Chamber Dimensions (W×H×D) | 500 × 600 × 500 mm |
| External Dimensions | 700 × 1720 × 1480 mm |
| Power Consumption | 4.0 kW |
| Temperature Range | 0–70 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Range | 30–65 %RH |
| Ozone Concentration Range | 50–500 pphm (parts per hundred million) |
| Gas Flow Velocity | 12–16 mm/s |
| Sample Rack | 360° continuous rotation at 1 rpm |
| Ozone Generation | Silent discharge tube type (standard), UV absorption type optional |
| Ozone Monitoring | QUA non-dispersive UV ozone analyzer (trace-level accuracy per ISO 1431-1) |
| Measurement Principle | Beer-Lambert law-based optical absorption |
| Air Purification System | Activated carbon adsorption + silica gel drying tower + thermal constant-temperature bath |
| Gas Path Design | Parallel ozone flow relative to specimen surface |
| Control System | AI digital PID controller with SSR output |
| Timer Resolution | 0.1 s (programmable up to 9999 h 59 min 59 s) |
| Data Interface | RS232 serial port, 4–20 mA analog output |
| Optional | PC-based real-time monitoring & data logging software with print/export capability |
| Electrical Supply | 220 VAC ±10%, 50/60 Hz |
| Safety Protections | Leakage current protection, over-temperature cutoff, motor overheat detection, over-current circuit breaker |
| Origin | Shanghai, China |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Domestic (PRC) |
| Model | ZLHS-250-SC |
| Sand/Dust Composition | Dry talc powder, silicate cement, fly ash |
| Sand Blowing Concentration | 2–4 kg/m³ |
| Sand Blowing Velocity | 2 m/s |
| Dust Blowing Concentration | 2–4 kg/m³ |
| Dust Blowing Velocity | 2 m/s |
| Test Volume (W×H×D) | 600 × 750 × 550 mm |
| Max Test Duration | 99 h 59 min |
| Vacuum Pressure Range | Adjustable, with analog gauge |
| Control System | Imported programmable microcomputer controller (Moeller/Klockner) |
| Filtration | Integrated air filter + pressure regulator + lubricator (FRL unit) |
| Fan Type | Enclosed alloy low-noise centrifugal blower |
| Heating System | Stainless steel mica-sheathed heating elements |
| Safety Protections | Leakage current protection, short-circuit protection, overtemperature cutoff, motor overheat & overload protection |
| Compliance | GB/T 2423.37–2006 (Test L), GB 7000.1–2007, GB 12085.6–1989, IEC 60529 (IP Code reference), EN 60529 |
| Brand | Zhulan Technology |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Manufacturer |
| Model | ZLHS-60-WSH |
| Spray Mode | Continuous Spray |
| Spray Rate | 1.0–2.0 mL/80 cm²/hr |
| Nozzle Pressure | 0.8–2.0 bar |
| De-misting Method | Air Compression |
| Temperature Range | +5°C to 60°C |
| Brand | ZOLLO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MJX-2000S |
| Capacity | 2000 L |
| External Dimensions (W×D×H) | 2395 × 760 × 1880 mm |
| Temperature Control Range | 0–50 °C |
| Temperature Uniformity | ±1 °C |
| Humidity Control Range | 30–95 %RH |
| Humidity Uniformity | ±2 %RH |
| Heating/Cooling System | Imported Compressor + PID-Controlled Heating |
| Humidification Method | Ultrasonic Humidifier |
| Inner Chamber Material | Stainless Steel (304) |
| Door Structure | Quadruple Door with Triple-Layer Hollow Insulated Glass |
| Safety Features | Over-Temperature Protection, Sensor Fault Detection |
| Control Interface | Microprocessor-Based Touch Panel with Dual Digital Displays (Temp & RH) |
| Optional Functions | 30-Stage Programmable Cycle, RS485/USB PC Connectivity for Data Logging and Remote Control |
| Brand | ZOLLO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MJX-350S |
| Capacity | 350 L |
| Temperature Range | 0–50 °C |
| Temp. Uniformity & Accuracy | ±0.8 °C |
| Humidity Range | 30–95 %RH |
| Humidity Accuracy | ±2 %RH |
| Humidification Method | Ultrasonic |
| Construction | Stainless Steel Interior, Triple-Layer Insulated Glass Door, Lockable Frame |
| Control System | Microprocessor-Based Touch Interface with Dual Digital Displays (Temp & RH) |
| Safety Features | Over-Temperature Protection, Sensor Fault Detection |
| Optional | 30-Stage Programmable Controller or PC-Linked Data Logging |
| Brand | ZOLLO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | MJX150S |
| Price | USD 1,250 (FOB Shanghai) |
| Capacity | 150 L |
| External Dimensions (W×D×H) | 594 × 594 × 1250 mm |
| Temperature Control Range | 0–50 °C |
| Temperature Uniformity | ±0.5 °C |
| Humidity Control Range | 50–95 %RH |
| Humidity Uniformity | ±5 %RH |
| Humidification Method | Ultrasonic |
| Display | Dual digital LED (temp & RH) |
| Control System | Microprocessor-based touch interface |
| Safety Features | Over-temperature protection, sensor fault detection |
| Optional | 30-step programmable controller or PC-based remote monitoring via RS485/USB |