Environmental Vibration Meter
Filter
Showing all 7 results
| Brand | ARALAB |
|---|---|
| Model | FitoClima 1000 ECV45 |
| Temperature Range | −45 °C to +180 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Uniformity | ±1 °C |
| Temperature Fluctuation | ±0.5 °C |
| Humidity Range | 10–98% RH (at 10–90 °C) |
| Humidity Accuracy | ±0.1% RH |
| Humidity Fluctuation | ±1% RH |
| Humidity Uniformity | ±2% RH |
| Internal Volume | 1000 L |
| Vibration Mode | Horizontal Linear Motion & Vertical Elevating Motion |
| Control System | Integrated Programmable Environmental Controller |
| Brand | AWA |
|---|---|
| Model | AHAI6256 |
| Type | Portable Vibration Analyzer |
| Compliance | ISO 8041:2005, ISO 5349-1:2001, GB/T 23716–2009, IEC 61260:1995 |
| Sensor | AWA14400 Environmental Accelerometer (Sensitivity: 40 mV/m·s⁻², Mass: 550 g) |
| Frequency Range | 0.315 Hz–250 Hz (±2 dB), with weighted bands Wb/Wc/Wd/We/Wj/Wk/Wm/Wz/Wu |
| Measurement Parameters | Acceleration (m/s²), Velocity (mm/s), Displacement (µm), 1/3-Octave Band Analysis, FFT Spectrum (up to 256 lines), Time History Recording |
| Dynamic Range | 48 dB–158 dB (re 10⁻⁶ m/s²) |
| Linear Range | >90 dB |
| Sampling Rate | 750 Hz |
| A/D Resolution | 24-bit |
| Memory | 64 kB Flash (128 measurement sets) |
| Interface | RS232 (printer & PC data export) |
| Power | 6×LR6 alkaline or rechargeable batteries (≥16 h operation) or 5 V external supply |
| Operating Temp | –10 °C to +50 °C |
| Storage Temp | –20 °C to +70 °C |
| RH | 25 %–90 % |
| Brand | GeoSIG |
|---|---|
| Origin | Switzerland |
| Model | FORA |
| Form Factor | Rack-Mounted (19″), Portable Configuration Available |
| Max Channels per Unit | 36 |
| ADC Resolution | 24-bit and 32-bit per channel |
| Dynamic Range | 137 dB (typ.), up to 150 dB (with optional firmware/hardware configuration) |
| Sampling Rate | Adjustable up to 2000 sps (standard), 5000 sps (high-speed option) |
| Synchronization | True hardware-synchronized sampling across all channels via shared low-jitter TCXO clock with GNSS (GPS/GLONASS/BeiDou) and NTP time alignment |
| Onboard Storage | Internal high-speed SSD up to 1 TB (SATA III), plus mirrored logging to SD card or USB drive |
| Connectivity | Gigabit Ethernet, RS-232/485 serial, 3G/LTE modem interface, satellite modem interface, PSTN modem interface |
| I/O | DVI video output for local visualization, 8-channel programmable relay alarm outputs (via optional 2×4 Alarm Expansion Card) |
| Power | Dual-input redundancy support (AC + DC/battery), integrated battery charger |
| Compliance | Designed for continuous unattended operation in seismic and structural health monitoring applications |
| Brand | GeoSIG |
|---|---|
| Origin | Switzerland |
| Model | STS Seismic Trip System |
| Instrument Type | Portable |
| Mounting | 19″ Rack-Mountable Module |
| Compliance | Designed for IEC 61508 SIL 2-capable safety functions (per system integration) |
| Sensor Interface | Analog ±5 V or ±10 V differential outputs from GeoSIG accelerometers (e.g., GS-11, GS-13, CR-6plus-compatible) |
| Alarm Outputs | Relay contacts (SPDT, rated 250 VAC / 5 A resistive), galvanically isolated |
| Data Storage | Internal buffered memory (≥7 days continuous 100 Hz waveform at 24-bit resolution) |
| Communication | Ethernet (TCP/IP, Modbus TCP), RS-232/485 (Modbus RTU), optional SNMP support |
| Operating Temperature | −20 °C to +60 °C |
| Enclosure | 19″ 1U rack chassis, IP20 |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AC-73-DH |
| Instrument Type | Portable |
| Dynamic Range | 165 dB |
| Full-Scale Range | ±0.5, ±1, ±2, ±3, or ±4 g |
| Bandwidth | DC to 200 Hz |
| Power Supply | 9.5–18 V DC (galvanically isolated) |
| Housing Compatibility | ≥100 mm borehole diameter |
| Sensor Architecture | Electro-mechanical force-balance with capacitive position sensing and magnetic restoring force |
| Origin | China |
|---|---|
| Type | Portable |
| Measurement Range | 60–140 dB (re 10⁻⁶ m/s²) |
| Frequency Range | 1–80 Hz |
| Frequency Weightings | Whole-body vertical (VLz), whole-body horizontal (VLx-y), linear (VAL) |
| Dimensions (main unit) | 24 × 8.1 × 3.1 cm |
| Weight (main unit) | 0.4 kg |
| Data Storage Capacity | 127 measurement sets |
| Compliance | ISO 2631-1, ISO 5349-1, and IEC 61260 Class 2 requirements for vibration meters |
| Brand | Instantel |
|---|---|
| Origin | Canada |
| Model | Minimate Pro4 |
| Instrument Type | Portable |
| Memory Capacity | 64 MB non-volatile storage |
| Channel Count | 4 independent analog input channels |
| Sampling Rate | 512–65,536 S/s per channel (user-selectable, channel-independent) |
| Sensor Compatibility | ISEE/DIN triaxial velocity sensors, hydrophones, accelerometers, linear microphones, optional integrated sound level meter (IEC 61672-compliant) |
| Environmental Rating | IP65-rated metal enclosure with sealed connectors |
| Calibration Data Handling | Automatic sensor ID, calibration date, and sampling rate logging per channel |
| Event Storage | >8,000 events (including full-waveform records up to 2+ hours total) |
| Remote Data Transfer | Auto Call Home™ via GSM/CDMA/LTE modems or InstaLink™ cloud platform (TLS 1.2 encrypted, password-protected web portal) |
| Software Integration | Compatible with Instantel Blastware™ (VDV calculation, zero-crossing frequency analysis, histogram + waveform dual-mode recording, event report generation per ISEE/AGI/USACE standards) |