- All
- Favorite
- Popular
- Most rated
| Brand | Festo |
|---|---|
| Origin | Germany |
| Model | VYKA-F7-M32-12-PF-5YQ7 |
| Type | 3/2-way, normally open/closed, direct-acting pilot valve with spring return |
| Nominal bore | 1.2 mm |
| Operating voltage | DC 12–26 V (±10% tolerance) |
| Power consumption | 3.5 W (high-current phase), 0.3 W (low-current hold phase) |
| Switching time (open/close) | 9 ms (gas medium, 20 °C, 1 bar Δp) |
| Operating temperature (fluid) | 15–50 °C |
| Ambient temperature | 15–50 °C |
| Storage temperature | −20–70 °C |
| Pressure range | −0.05 to 0.2 MPa (−0.5 to 2 bar) depending on function |
| Differential pressure max | 0.2 MPa |
| Burst pressure | 2.3 MPa |
| Rated flow (DIN 1343, air, Δp = 1 bar) | 11 L/min |
| Kv value | 0.021 m³/h (water, Δp = 1 bar) |
| Housing material | Reinforced PEEK/PPA |
| Diaphragm & seal material | FFPM |
| Weight | 10.9 g |
| Protection class | IP40 |
| Brand | Festo |
|---|---|
| Origin | Germany |
| Model | EHAA-G1-E20-40-GGA1-AP |
| Mounting Orientation | Vertical |
| Corrosion Resistance Class | CRC2 (Medium) |
| PWIS Compliance | VDMA 24364, Category III |
| Storage Temperature | −20 °C to +70 °C |
| Operating Ambient Temperature | 0 °C to +40 °C |
| Relative Humidity | 0–100% (non-condensing) |
| Weight | 95 g |
| Screw Material | High-alloy stainless steel |
| Bracket Material | High-alloy stainless steel |
| Positioning Element Material | High-alloy steel |
| Brand | Festo |
|---|---|
| Origin | Germany |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | VTOE-D9-T3-M22C-08-F-P-P-S |
| Nominal Orifice Diameter | 0.8 mm |
| Dispensing Needle ID | 1 mm |
| Needle Length | 30 mm |
| Grid Pitch | 9 mm |
| Valve Function | 2/2-way, normally closed, monostable |
| Operating Pressure Range | 0–0.05 MPa (0–7.25 psi) |
| Internal Volume (incl. fluid interface) | 113 µL |
| Minimum Dispense Volume | 5 µL |
| Typical Volume Accuracy | <1% CV for volumes >5 µL |
| Max. Switching Frequency | 4 Hz |
| Opening Time | 7 ms |
| Closing Time | 2 ms |
| Continuous Duty Cycle | 100% (standalone), 50% (modular installation, max. on-time 1 s) |
| Electrical Power Consumption | 1.8 W |
| Nominal Voltage | DC 24 V ±10% |
| Ambient Temperature (operating) | 5–40 °C |
| Medium Temperature | 5–50 °C |
| Storage Temperature | −20–70 °C |
| Protection Class | IP30 |
| Weight | 18 g |
| Electrical Interface | 2-pin open cable, 150 mm length, AWG28, stripped ends |
| Fluid Interface | UNF 1/4-28 |
| Needle Material | High-alloy stainless steel (1.4301) |
| Corrosion Resistance Class | CRC0 |
| Shock & Vibration | EN 60068-2-27 / EN 60068-2-6, Severity Level 2 |
| Max. Altitude | ≤2000 m NHN |
| Pollution Degree | 2 |
| Relative Humidity | 0–95% non-condensing |
| Brand | Festo |
|---|---|
| Origin | Germany |
| Model | VABS-K3-16S-20-N18-P |
| Nominal Diameter | 2 mm |
| Valve Body Size | 16 mm |
| Fluid Connection | Internal Thread, 1/8 NPT |
| Mounting Orientation | Adjustable |
| Max. Number of Valve Positions | 1 |
| Flow Direction | Bidirectional |
| Operating Media | Liquids and Gases |
| Material Compatibility | PEEK (Polyetheretherketone) |
| Corrosion Resistance Class | CRC0 (No corrosion resistance) |
| PWIS Compliance | VDMA 24364, Category III |
| Storage Temperature | –20 °C to +70 °C |
| Medium Temperature Range | 0 °C to +50 °C |
| Ambient Temperature Range | 0 °C to +50 °C |
| Tightening Torque (Valve Mounting) | 0.3 Nm |
| Tightening Torque (Base Installation) | 7 Nm |
| Max. Recommended Torque (Threaded Interface) | 0.6 Nm |
| Weight | 26 g |
| Food Industry Suitability | Confirmed per supplementary documentation |
Show next