Grinder
Filter
Showing 121–144 of 144 results
| Brand | Perten |
|---|---|
| Origin | Finland |
| Model | 3310 and 3600 |
| Sample Type | Hard, low-fat grains (≤20% fat) |
| Feed Size | 40–80 mesh |
| Output Particle Size | ≥0.5 mm |
| Batch Capacity | ≤150 g |
| Grinding Disc Diameter | 75 mm (3310), 100 mm (3600) |
| Motor Power | 0.5 kW |
| Voltage/Frequency | 110/220/440 V, 50/60 Hz, single- or three-phase |
| Net Weight | 33 kg (3310), 34 kg (3600) |
| Dimensions (L×W×H) | 440×550×260 mm (3310), 560×445×220 mm (3600) |
| Disc Adjustment | 6-position gap setting |
| Disc Types | Type I (standard, moisture analysis), Type II (fine, PSI testing), Type III (coarse, high-moisture oats/barley) |
| Optional Accessory | 3170 Motorized Feeder with rubber impeller |
| Brand | Perten |
|---|---|
| Origin | Sweden |
| Model | LM120 |
| Sample Type | Hard, granular, and fibrous materials (e.g., cereals, feed, meat) |
| Feed Size | 40–80 mesh |
| Output Particle Size | 0.5–2.0 mm (standard sieve: 0.8 mm) |
| Batch Capacity | ≤300 g |
| Rotor Speed | 16,800 rpm |
| Grinding Time | 30–50 s per 300 g batch |
| Noise Level | ≤75 dB(A) with acoustic enclosure |
| Power Supply | 110–440 V, 1/3-phase, 50/60 Hz, 1.1 kW |
| Dimensions | 545 × 460 × 240 mm |
| Optional Accessories | 3170 Motorized Feeder |
| Compliance | Designed for GLP-compliant laboratories |
| Brand | Perten |
|---|---|
| Origin | Sweden |
| Model | LM3100 |
| Grinding Principle | High-Speed Hammer Mill with Pneumatic Feed & Cyclonic Separation |
| Maximum Batch Capacity | ≤300 g |
| Feed Size | 40–80 mesh |
| Output Particle Size | ≥0.5 mm (adjustable via stainless-steel sieve plates: 0.5–2.0 mm standard options) |
| Rotor Speed | 16,800 rpm |
| Grinding Time | 30–50 s for 300 g sample |
| Noise Level | ≤75 dB(A) with acoustic enclosure |
| Power Supply | 110–440 V, single- or three-phase, 50/60 Hz, 1.1 kW |
| Dimensions (LM3100) | 560 × 510 × 630 mm |
| Compliance | Designed for GLP-compliant grain and feed analysis workflows |
| Brand | Retsch |
|---|---|
| Origin | Germany |
| Model | PM 400 |
| Instrument Type | Planetary Ball Mill |
| Sample Suitability | Hard, brittle, fibrous, soft to extremely hard materials |
| Feed Size | < 10 mm |
| Final Particle Size | < 0.1 µm (colloidal grinding) |
| Batch Volume | up to 4 × 220 mL or 8 × 20 mL |
| Grinding Platforms | 4 (standard), optional 2-platform configuration for mechanical alloying |
| Sun Wheel Diameter | 300 mm |
| Sun Wheel Speed | 30–400 rpm |
| Speed Ratio Options | 1:−2, 1:−2.5, 1:−3 |
| Drive Power | 1.5 kW |
| Net Weight | ~290 kg |
| Dimensions (W×H×D) | 836 × 1220 (1900) × 780 mm |
| Protection Class | IP 30 |
| Sound Pressure Level | LpAeq < 85 dB(A) |
| Compliance | CE certified |
| Grinding Jar Materials | Hardened steel, stainless steel, tungsten carbide, agate, sintered corundum, zirconium oxide |
| Jar Volumes | 12–500 mL |
| Programmable Parameters | 10 stored methods |
| Interface | RS 232 / RS 485 |
| Energy Input Measurement | Yes |
| Cooling | Automatic grinding chamber ventilation system |
| Brand | Rong Tsong |
|---|---|
| Origin | Taiwan |
| Model | RT-N01A |
| Motor Power | 300 W |
| Voltage | 220 V AC, single-phase (custom voltage available) |
| Speed | 27,000 rpm |
| Chamber Capacity | 50 g |
| Feed Size | < 25 mm |
| Output Particle Size | 0.01–0.5 mm (≤ 350 µm) |
| Grinding Chamber Dimensions (H × Ø) | 31 × 87 mm |
| Unit Dimensions (W × D × H) | 152 × 105 × 270 mm |
| Net Weight | 2.1 kg |
| Chamber Material | SUS304 stainless steel |
| Blade Material | Heat-treated SUS420 stainless steel |
| Bearing | Imported Japanese precision bearing |
| Thermal Overload Protection | Integrated motor protection switch |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | EB10/8 Jaw Crusher |
| Max. Feed Size | 70 mm (Hopper Opening: 100 mm × 80 mm) |
| Final Particle Size | < 4 mm |
| Adjustable Jaw Gap | 4–12 mm |
| Throughput | 80–350 kg/h |
| Motor Power | 1100 W, 3-Phase |
| Jaw Materials | Hardened Steel, Stainless Steel, Tungsten Carbide, Zirconia Oxide |
| Dimensions (with Base & Collection Tray) | 375 mm × 750 mm × 800 mm |
| Compliance | CE-certified, Designed to EN 61000-6-2 / EN 61000-6-4 Safety & EMC Standards |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | EB15/10 |
| Max. Feed Size | 90 mm |
| Max. Inlet Opening | 150 mm × 100 mm |
| Final Particle Size | < 5 mm |
| Adjustable Jaw Gap | 5–15 mm |
| Throughput | 100–350 kg/h |
| Motor Power | 2.2 kW (3-phase) |
| Jaw Materials | Hardened Steel, Stainless Steel, Tungsten Carbide, Zirconia Oxide |
| Dimensions (with base & collection box) | 430 mm × 880 mm × 955 mm |
| Compliance | CE |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | EB20/12.5 Jaw Crusher |
| Max. Feed Size | 125 mm |
| Feed Opening | 200 mm × 125 mm |
| Final Particle Size | < 5 mm |
| Adjustable Jaw Gap | 5–40 mm |
| Throughput Capacity | 500–1800 kg/h |
| Drive Motor | 3-Phase, 4000 W |
| Jaw Materials | Hardened Steel, Stainless Steel, Tungsten Carbide, Zirconia |
| Dimensions (with Base & Collection Tray) | 686 mm × 1100 mm × 1160 mm |
| Compliance | CE Marked, EN 61000-6-2 / EN 61000-6-4 |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | EB7/6 Jaw Crusher |
| Max. Feed Size | 50 mm |
| Final Particle Size | < 1 mm |
| Adjustable Jaw Gap | 2–8 mm |
| Throughput | 15–90 kg/h |
| Motor Power | 750 W (3-phase) |
| Jaw Materials | Hardened Steel, Stainless Steel, Tungsten Carbide, Zirconia Oxide |
| Dimensions (w/d/h incl. base) | 296 × 495 × 590 mm |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Equipment Type | Vibratory Ball Mill |
| Max Feed Size | < 10–20 mm |
| Final Particle Size | < 1 µm (material-dependent) |
| Sample Capacity | ≤ 2 × 300 mL (per 500 mL jar) |
| Drive Power | 190 W |
| Vibration Frequency | 1500 min⁻¹ |
| Amplitude Range | 0–6 mm |
| Timer | Digital, LCD-displayed |
| Jar Materials | Stainless Steel, Ceramic |
| Dimensions (W×D×H) | 570 × 504 × 374 mm |
| Compliance | CE, ISO 9001-manufactured equipment |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | HM 1 |
| Max. Feed Size | <50 mm |
| Final Particle Size | 2–30 mm |
| Grate Aperture Options | 1, 2, 3, 4, 5, 8, 10 mm |
| Throughput Capacity | 1000 kg/h |
| Motor Power | 5500 W |
| Rotor & Grate Material | Stainless Steel |
| Dimensions (L×W×H) | 990 × 570 × 900 mm |
| Compliance | CE Marked |
| Application Range | Soft to Medium-Hard Materials (Mohs 2–5) |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | SB200 Disc Mill |
| Maximum Feed Size | < 20 mm |
| Final Particle Size | < 100 µm |
| Adjustable Disc Gap | 0.1–6 mm |
| Throughput | 2–150 kg/h |
| Disc Speed | 400 rpm |
| Drive Power | 1500 W |
| Disc Materials | Hardened Steel, Tungsten Carbide, Zirconia |
| Dimensions (L×W×H) | 825 × 400 × 430 mm |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | SBM200 |
| Grinding Mode | Batch or Continuous |
| Max. Feed Size | 20 mm |
| Final Particle Size | <100 µm |
| Adjustable Disc Gap | 0.1–5.5 mm |
| Throughput | 5–150 kg/h |
| Motor Power | 1500 W |
| Disc Materials | Hardened Steel / Tungsten Carbide / Zirconia Oxide |
| Compliance | CE |
| Safety Features | Interlocked Safety Lock, Tool-Free Access, Vacuum-Cleanable Cavity |
| Dust Control | Fully Enclosed System with Integrated Vacuum Dust Extraction |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | TS750 / TS1000 |
| Maximum Feed Size | <15 mm |
| Final Particle Size | <40 µm (dry grinding), <1 µm (wet grinding) |
| Sample Capacity | 4 × 10 mL, 20 mL, 50 mL, 100 mL, or 250 mL per batch |
| Grinding Bowl Volumes | 42–48 mL (10 mL sample), 79 mL (20 mL), 116–194 mL (50 mL), 262–314 mL (100 mL), 683–686 mL (250 mL) |
| Operating Speed | 700 rpm or 1000 rpm (material-dependent) |
| Timer Range | 1 s to 99 min 59 s |
| Power Input | 550 W (TS750) / 800 W (TS1000) |
| Bowl Materials | Chrome steel, tungsten carbide, agate, zirconia, Cu-Ni alloy |
| Dimensions (L×W×H) | 600 × 674 × 1125 mm |
| Compliance | CE-marked, designed for GLP-compliant laboratories |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | UM150 Continuous/Intermittent Multi-Function Grinder |
| Motor Power | 1100 W |
| Rated Speed | 2850 rpm |
| Max Feed Size | <15 mm |
| Final Particle Size | 150–500 µm |
| Throughput (Continuous) | 80 kg/h |
| Sieve Options | 150 µm, 315 µm, 500 µm |
| Batch Collection Volumes | 500–5000 mL |
| Safety | Interlocked Lid Activation |
| Operation Modes | Continuous Feed & Intermittent Batch |
| Brand | Siebtechnik |
|---|---|
| Origin | Germany |
| Model | WS 25/15 Double Roll Mill |
| Maximum Feed Size | <12 mm |
| Final Particle Size | <200 µm |
| Roll Gap Adjustment Range | 0.2–5 mm (continuously adjustable) |
| Throughput Capacity | 0.1–20 m³/h |
| Roll Speed | 259 rpm |
| Roll Dimensions | Ø250 mm × 150 mm |
| Drive Motor Power | 3,000 W |
| Roll Material | Stainless Steel / Tungsten Carbide |
| Overall Dimensions (w/o base) | 635 mm × 1135 mm × 530 mm |
| Applicable Materials | Brittle to medium-hard solids (Mohs hardness up to 8.5), e.g., limestone, coal, coke, quartz sand, ceramics, glass, bauxite, slag |
| Brand | SPEX SamplePrep |
|---|---|
| Origin | USA |
| Model | BM-450 |
| Instrument Type | High-Energy Ball Mill |
| Sample Suitability | Hard & Brittle Materials |
| Feed Size | <30 mm |
| Final Particle Size | <5 nm |
| Batch Capacity | 2 jars per run |
| Operating Speed | 1725 rpm |
| Motion Type | Patented 3D Figure-Eight Oscillation |
| Clamp Stroke | ±59 mm (front-back), ±25 mm (left-right) |
| Clamp Frequency | 1060 cycles/min |
| Cooling | Integrated Air-Cooling System for Clamp Assembly |
| Control Interface | Programmable LCD Touch Panel |
| Max Program Duration | 10000 minutes |
| Grinding Jar Design | Seamless Arc-Profile Interior (No Dead Zones) |
| Brand | SPEX SamplePrep |
|---|---|
| Origin | USA |
| Model | CG-200 Freezer/Mill |
| Instrument Type | Cryogenic Grinder |
| Sample Compatibility | Frozen & Temperature-Sensitive Materials |
| Output Particle Size | < 0.01 mm |
| Input Sample Size | ≤ 3 cm |
| Batch Capacity | 0.1–10 g |
| Cooling Medium | Liquid Nitrogen (LN₂) |
| Precooling Time | 4.5 min to −196 °C |
| Grinding Time | Adjustable, typically 2 min |
| Chamber Volume | 20 mL (standard) |
| Precooling Chamber Volume | 100 mL |
| Power | 225 W |
| Voltage | 230 V / 50 Hz |
| Frequency Range | 5–15 Hz |
| Dimensions | 48 × 27 × 32 cm |
| Weight | 11.8 kg |
| Certifications | CE, RoHS, WEEE compliant |
| Data Interface | USB port for program upload/download and diagnostics |
| Stored Methods | Up to 20 user-defined protocols |
| Safety Features | LN₂ level sensor with auto-shutdown, interlocked lid, coil overheat protection |
| Brand | SPEX SamplePrep |
|---|---|
| Origin | USA |
| Model | CG-500 |
| Instrument Type | Cryogenic Grinder |
| Sample Applicability | Frozen & Temperature-Sensitive Materials |
| Final Particle Size | <0.01 mm |
| Maximum Feed Size | <5 cm |
| Batch Capacity | 0.1–200 g |
| Cooling Medium | Liquid Nitrogen (LN₂) |
| Precooling Time | 4.5 min to −196 °C |
| Grinding Time | Adjustable, typically 2 min |
| Electromagnetic Impact Frequency | 5–15 Hz |
| Power | 700 W |
| Voltage | 230 V / 50 Hz |
| Dimensions | 50.8 × 53.34 × 64.77 cm |
| Weight | 35 kg |
| Brand | SPEX SamplePrep |
|---|---|
| Origin | USA |
| Model | BM-400/450 |
| Instrument Type | High-Energy Ball Mill |
| Sample Compatibility | Hard and brittle materials |
| Feed Size | <20 mm |
| Final Particle Size | <5 nm |
| Batch Capacity | 0.1–10 g per vial |
| Motion Type | Patented ∞-shaped 3D eccentric oscillation |
| Vial Displacement | ±59 mm (front-rear), ±25 mm (left-right) |
| Oscillation Frequency | 1060 cycles/min |
| Motor Speed | 1725 rpm |
| Cooling | Integrated forced-air cooling for clamp and motor housing |
| Control Interface | Programmable LCD touchscreen with time-based automation (up to 10,000 min) |
| Compliance | Designed for GLP/GMP-aligned workflows |
| Brand | TRILOS |
|---|---|
| Origin | USA |
| Model | TR120A |
| Instrument Type | Three-Roll Mill |
| Sample Applicability | Soft and semi-viscous pastes, slurries, and dispersions |
| Final Particle Size | ≤0.01 mm (≤10 µm) |
| Feed Particle Size | >1 µm |
| Typical Output Particle Size | ~1 µm |
| Batch Processing Capacity | 0.5–60 L |
| Roll Diameter | 120 mm |
| Roll Length | 450 mm |
| Roll Speed Ratio | 1:3:9 |
| Roll Materials | Silicon Carbide (SiC), Alumina (Al₂O₃), Zirconia (ZrO₂), or Stainless Steel |
| Doctor Blade Materials | Al₂O₃, ZrO₂, Stainless Steel, or PVC |
| Motor Power | 3.5 kW |
| Dimensions (L×W×H) | 1150 × 660 × 1280 mm |
| Weight | 350 kg |
| Cooling System | Integrated recirculating coolant loop |
| Control Interface | Touchscreen HMI with programmable recipe management |
| Operational Modes | Gap Mode & Pressure Mode |
| Safety Features | Interlocked dust cover, emergency stop, roll gap limit sensors, thermal overload protection |
| Brand | TRILOS |
|---|---|
| Model | TR50M |
| Origin | USA |
| Equipment Type | Three-Roll Mill (Laboratory-Scale) |
| Roller Diameter | 50 mm |
| Roller Length | 150 mm |
| Roller Speed Ratio | 1:2:4 |
| Roller Material | Al₂O₃ / ZrO₂ / Stainless Steel |
| Doctor Blade Material | Al₂O₃ / ZrO₂ / Stainless Steel / PVC |
| Adjustable Gap | Manual |
| Speed Control | Stepless (Variable) |
| Feed Particle Size | >1 µm |
| Final Output Particle Size | <0.01 mm (10 µm) |
| Batch Throughput | 0.02–5 L/h |
| Motor Power | 0.12 kW |
| Dimensions (L×W×H) | 390 × 275 × 310 mm |
| Weight | 20 kg |
| Sample Compatibility | Soft, paste-like, and semi-viscous materials (e.g., polymer dispersions, ointments, pastes, conductive inks) |
| Brand | TRILOS |
|---|---|
| Origin | USA |
| Model | TR80A |
| Roller Diameter | 80 mm |
| Roller Length | 200 mm |
| Speed Ratio | 1:3:9 |
| Throughput Capacity | 0.02–20 L/h |
| Final Particle Size | ≤1 µm (material-dependent) |
| Feed Particle Size | >1 µm |
| Roller Material Options | SiC, Al₂O₃, ZrO₂, Stainless Steel |
| Doctor Blade Material Options | Al₂O₃, ZrO₂, Stainless Steel, PVC |
| Motor Power | 1.5 kW |
| Dimensions (L×W×H) | 750 × 340 × 490 mm |
| Integrated Cooling Circuit | Yes |
| Control Interface | Full-touch industrial HMI |
| Gap Adjustment | Real-time online correction |
| Compliance | Designed for GLP-compliant lab environments |
| Software Features | Recipe-based operation with audit-trail-capable parameter logging |
| Brand | Zoz |
|---|---|
| Origin | Germany |
| Model | Simoloyer® |
| Instrument Type | High-Energy Ball Mill |
| Sample Applicability | Hard & Brittle Materials |
| Final Particle Size | < 0.01 mm |
| Feed Particle Size | Model-Dependent |
| Batch Processing Capacity | Model-Dependent |
| Grinding Principle | Impact-Dominated Mechanical Alloying |
| Operation Environment | Inert Gas (Ar, H₂), Air, or Vacuum |
| Cooling Capability | Integrated Optional Cooling |
| Scalability | Lab-Scale to Pilot/Industrial Scale |
| Compliance Framework | Designed for GLP/GMP-Aligned R&D Environments |