Hardness Tester
Filter
Showing all 28 results
| Brand | API |
|---|---|
| Origin | Sichuan, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | HS-19GDV |
| Instrument Type | Shore Durometer (Type A & D) |
| Hardness Range | 14–115 Shore A / 20–85 Shore D (typical dual-scale calibration per ASTM D2240) |
| Display | LCD digital readout with statistical functions (mean, delete, hold) |
| Data Output | RS-232 interface for optional printer or PC connectivity |
| Hardness Conversion | Built-in algorithms for approximate conversion to Brinell (HB), Rockwell (HRB/HRC), and Vickers (HV) scales per ISO 14676 and ASTM E140 |
| Brand | Bareiss |
|---|---|
| Origin | Germany |
| Model | digi test II |
| Force Range Options | 0–2 N or 0–20 N (user-swappable load modules) |
| Test Principle | Axial compression with controlled displacement rate |
| Display | LCD (240 × 128 pixels) |
| Dimensions (Base Unit) | 200 × 250 × 570 mm |
| Weight (Base Unit) | 9 kg |
| Housing Material | Anodized aluminum alloy |
| Power Supply | 100–240 VAC, 50/60 Hz |
| Communication Interfaces | RS-232, USB |
| Compliance | Designed for GLP-compliant capsule quality control in pharmaceutical R&D and manufacturing |
| Brand | Bareiss |
|---|---|
| Origin | Germany |
| Model | DT Chamber |
| Temperature Range | -70 °C to +180 °C (customizable) |
| Hardness Scales | Shore A, Shore D, IRHD |
| Sample Capacity | Up to 25 specimens (customizable) |
| Test Modes | Single-point, continuous, programmable, hysteresis recovery (IRHD) |
| Instrument Type | Shore / IRHD Hardness Tester |
| Brand | Dantsin |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Galieo |
| Pricing | Upon Request |
| Brand | Innovatest |
|---|---|
| Country of Origin | Netherlands |
| Manufacturer | Innovatest B.V. |
| Type | Rockwell Hardness Tester |
| Measurement Range | 10–100 HR |
| Total Test Force | 187.5 kgf |
| Test Space | 650 mm (H) × 175 mm (D) |
| Nose Extension Length | 170 mm |
| Test Table Dimensions | 425 mm × 370 mm (with hardened zone & T-slots) |
| Preload Forces | 3 kgf, 10 kgf |
| Main Load Range | 15–150 kgf |
| Loading System | Fully Automatic, Load Cell-Based Closed-Loop Control |
| Guidance System | Full-Height Linear Rails + Precision Ball-Screw Drive |
| Display | 6.5″ Industrial Touchscreen |
| Software | I-TOUCH™ Hardness Control Suite |
| Data Storage | Internal Memory (up to 150 readings) |
| Interface | USB |
| Illumination | Integrated LED Surface Lighting |
| Base Enclosure | Interchangeable ABS Protective Housing |
| Brand | INNOVATEST |
|---|---|
| Origin | Netherlands |
| Manufacturer | Yes |
| Import Status | Imported |
| Model | NEXUS 3001XLM-IMP |
| Test Force Range | 30 kgf to 3000 kgf |
| Z-Axis Travel | 345 mm |
| Specimen Height Clearance | 335 mm |
| Depth Clearance | 220 mm |
| Turret | 2-position (indenter + Brinell objective with annular LED illumination) |
| Imaging System | 5 MP full-HD camera with motorized zoom and auto-focus |
| Control Interface | IMPRESSIONS™ software on 15″ industrial touchscreen |
| Measurement Method | Automated video-based indent diameter analysis per ISO 6506-1 and ASTM E10 |
| Brand | HOYTOM |
|---|---|
| Origin | Spain |
| Model | Link RB |
| Test Height | 170 mm |
| Compliance | EN ISO 6508, ASTM E18, EN ISO 6506, ASTM E10 |
| Optional Accessories | HOYTOM LHB Digital Brinell Impression Measurement System, USB Digital Microscope (20×/30×/40×), Integrated Data Logging Software |
| Brand | Kägi |
|---|---|
| Origin | Germany |
| Model | Micro IRHD |
| Instrument Type | Microindentation Hardness Tester for Elastomers |
| Standards Compliance | DIN ISO 48, ISO 48:2018, ASTM D1415-19, BS 903-A26 |
| Sample Thickness Range | 1–5 mm (recommended), up to 90 mm (with optional fixtures) |
| Resolution | 0.1 Micro IRHD |
| Dimensions (Tester) | Ø200 mm × 470 mm |
| Dimensions (Controller) | 290 mm × 260 mm × 75 mm |
| Weight | 17.5 kg |
| Control Interface | RS232 serial communication with Windows PC |
| Automation | Motorized Z-stage, programmable dual-weight actuation, auto-positioning sample stage |
| Software Platform | Native MS Windows application with real-time data acquisition, statistical analysis, hysteresis calculation, report generation (PDF/CSV), label printing, and ASCII export |
| Brand | Olympus |
|---|---|
| Origin | Japan |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | GYZJ-934-1 |
| Pricing | Available Upon Request |
| Brand | OLYMPUS |
|---|---|
| Origin | Japan |
| Model | HBRV-187.5 |
| Type | Combined Brinell, Rockwell & Vickers Hardness Tester |
| Drive | Motorized Load Application |
| Compliance | ASTM E10, ASTM E18, ASTM E92, ISO 6506, ISO 6508, ISO 6507 |
| Application Scope | Ferrous & Non-ferrous Metals, Heat-Treated Surfaces, Thin Hardened Sheets, Cast Iron, Carbides, Annealed & Tempered Steels |
| Brand | OLYMPUS |
|---|---|
| Origin | Japan |
| Model | HBS-3000 |
| Hardness Scale | HBW (Brinell, tungsten carbide ball indenter) |
| Test Force Range | 187.5 kgf to 3000 kgf (standard Brinell load range per ISO 6506-1) |
| Indenter | 10 mm hardened steel or tungsten carbide ball |
| Optical Measurement System | High-magnification eyepiece with calibrated scale or digital image capture (optional) |
| Display | Large LCD screen with real-time test parameter and result visualization |
| Data Output | RS-232 or USB interface for printer or PC connectivity |
| Compliance | Designed to meet ISO 6506-1, ASTM E10, and JIS Z 2243 requirements |
| Brand | Olympus |
|---|---|
| Origin | Japan |
| Model | LEEB140 |
| Hardness Scales | HL, HB, HRB, HRC, HV, HS |
| Display | Full Chinese LCD Menu Interface |
| Printer | Built-in High-Speed Thermal Printer |
| Environmental Rating | Vibration-Resistant, Shock-Resistant, EMI-Immune |
| Portability | Handheld, Battery-Powered |
| Compliance | ISO 16859, ASTM A956 (Leeb Method) |
| Data Traceability | On-device Printout with Timestamp & Sample ID Support |
| Power Supply | Rechargeable Li-ion Battery |
| Brand | Olympus |
|---|---|
| Origin | Japan |
| Model | Leeb810A |
| Type | Shore A Hardness Tester |
| Display | Digital LCD |
| Application Scope | Rigid Plastics, Hard Rubbers, Coatings, and Polymer-Based Industrial Materials |
| Compliance | ASTM D2240, ISO 7619-1, ISO 868 |
| Brand | OLYMPUS |
|---|---|
| Origin | Japan |
| Model | MHVSX-50 |
| Loading Method | Electromechanical Closed-Loop Force Control |
| Indentation Measurement | Dual-axis Encoder-equipped Eyepiece (D1/D2) |
| Display | 7-inch High-Sensitivity Touchscreen GUI |
| Optical System | High-Resolution Metallurgical Objective Lens with 10-Step Adjustable LED Illumination |
| Data Output | USB Export to Excel (.xlsx) |
| Hardness Conversion | Vickers (HV), Brinell (HB), Rockwell (HRB/HRC) |
| Compliance | ASTM E92, ISO 6507-1, JIS Z 2244 |
| Automation | Fully Automated Turret Positioning, Motorized Indenter/Objective Switching, Auto-Focus Optional |
| Software Interface | PC Communication via Optional RS-232/USB Protocol with Audit Trail Support |
| Brand | OLYMPUS |
|---|---|
| Origin | Japan |
| Model | PHB-150 |
| Type | Portable Shear-Pin Operated Brinell Hardness Tester |
| Force Application | Mechanical Screw-Driven & Hammer-Impact Dual Mode |
| Hardness Scale | HBW (Brinell Hardness Number, tungsten carbide ball indenter) |
| Indentation Measurement | Optical Readout via Integrated Eyepiece Microscope |
| Compliance | Designed per ISO 6506-1, ASTM E10, and JIS Z 2243 standards |
| Brand | OLYMPUS |
|---|---|
| Origin | Japan |
| Model | PHB-750 |
| Applicable Standard | ASTM E110, GB/T 4285 |
| Test Force | 750 kgf (fixed) |
| Force Application Method | Manual lever-driven hydraulic system with pressure-relief control valve |
| Indentation Hold Equivalent | 10–15 s via 3–4 repeated pressure peaks to 750 kgf |
| Mounting Method | Permanent magnet base for ferromagnetic substrates |
| Brand | Olympus |
|---|---|
| Origin | Japan |
| Model | T-U2 |
| Measurement Principle | Ultrasonic Contact Impedance (UCI) |
| Portability | Handheld, Battery-Powered |
| Compliance | ASTM A1038, ISO 17643, DIN 50159-2 |
| Hardness Scales | HV, HB, HRC, HRB (converted) |
| Indentation Load | 10 N (standard), optional 3 N / 5 N / 20 N |
| Probe Frequency | 98 MHz |
| Resolution | 1 HV |
| Repeatability | ±1.5 HV (under controlled conditions) |
| Operating Temperature | 0–40 °C |
| Battery Life | ≥12 hours (Li-ion, rechargeable) |
| Data Storage | Internal memory for ≥2,000 readings |
| Interface | USB-C, Bluetooth 5.0 |
| Brand | Olympus |
|---|---|
| Origin | Japan |
| Model | T-U3 |
| Measurement Principle | Ultrasonic Contact Impedance (UCI) |
| Portability | Handheld, Battery-Powered |
| Compliance | ISO 17673, ASTM A1038, DIN 50159-2 |
| Hardness Scales | HV, HB, HRC, HRB (converted) |
| Indentation Load | 10 N (standard), optional 3 N / 5 N / 20 N |
| Probe Frequency | 10 MHz |
| Resolution | 1 HV |
| Repeatability | ≤ ±1.5 HV (per ISO 17673) |
| Operating Temperature | 0–40 °C |
| Battery Life | ≥ 12 hours (Li-ion, rechargeable) |
| Data Storage | Internal memory for ≥ 2,000 readings with timestamp, location tag (optional GPS), and operator ID |
| Brand | Olympus |
|---|---|
| Origin | Japan |
| Model | TH520 |
| Testing Direction | Vertical |
| Maximum Test Height | 400 mm |
| Applicable Standards | ASTM E18, ISO 6508, JIS Z 2245 |
| Hardness Scales | HRA, HRB, HRC, HRD, HRF, HRG, HRH, HRR, HR15N, HR30N, HR45N, HR15T, HR30T, HR45T |
| Load Application | Automatic motorized loading with dual-scale force system (major/minor loads) |
| Indenter Types | Diamond cone (120°, 0.2 mm tip radius) and hardened steel ball (1/16", 1/8", 1/4", 1/2") |
| Measurement Repeatability | ≤ ±0.5 HR under standardized conditions |
| Compliance | GLP-ready architecture with audit-trail-capable software interface |
| Brand | Olympus |
|---|---|
| Origin | Japan |
| Model | U918 |
| Compliance | DIN 50159-1:2008, ASTM A1038-2005, JB/T 9377-2010, JJG 654-2013, GB/T 34205-2017 |
| Calibration Modes | 10-point factory calibration, single-point elastic modulus compensation, multi-point direct hardness calibration (HRC, HRB, HRA, HB, HV5) |
| Display | 3.5″ color LCD with real-time statistics (min/max/avg/count/timestamp) |
| Indentation Size | <20 µm diameter (requires >200× optical magnification for visualization) |
| Measurement Time | ≤2 s per test |
| Battery | 3.6 V / 3000 mAh Li-ion, up to 15 h operation |
| Data Storage | 50 test sets + 10 calibration profiles |
| Connectivity | Bluetooth printer support (optional), USB-C PC data export |
| Test Orientation | Omnidirectional (±5° tolerance from perpendicular) |
| Hardness Scales | HV, HRC, HRA, HRB, HB (directly calibrated, no conversion tables required) |
| Brand | RHEOTECH |
|---|---|
| Origin | Japan |
| Model | FUDOH RTC-3002D |
| Load Capacity | ±200 N |
| Stroke Range | 0.1–99.9 mm (0.1 mm resolution) |
| Test Speed Options | 2, 5, 6, 10, 20, 30 cm/min or 5, 6, 10, 20, 30, 60 cm/min |
| Display | Triple 3-digit LED (force, displacement, time) |
| Auto-zero Function | Yes |
| Power Supply | 220–250 V AC, 50/60 Hz |
| Dimensions | 260 W × 430 H × 280 D mm |
| Weight | 15 kg |
| Compliance | Designed for ISO 11357, ASTM F3165, USP <1043>, and GLP-compliant texture analysis workflows |
| Brand | Rtec |
|---|---|
| Origin | Switzerland |
| Model | HPT-1000 |
| Maximum Operating Temperature | 1200 °C |
| Maximum Closed-Loop Load | 2000 N |
| Environmental Control | Inert Gas Sealed Chamber (N₂/Ar) |
| Sample Stage | Motorized XY Positioning System |
| Compliance | ASTM E23, ISO 6507, ISO 14577, USP <1031>, FDA 21 CFR Part 11 (Software Module) |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer | Shimadzu Corporation |
| Product Type | Imported Instrument |
| Model | DUH-211/211S |
| Instrument Category | Microhardness Tester |
| Force Range | 0.1–1961 mN |
| Maximum Test Load | 1961 mN |
| Force Resolution | 0.196 mN |
| Force Accuracy | ±1% of displayed value |
| Displacement Measurement Range | 0–10 µm |
| Displacement Resolution | 0.0001 µm |
| Indenter | 115° triangular pyramid (Berkovich-type) |
| Optical Magnification | ×500 (with ×50 objective lens) |
| Compliance Standard | ISO 14577-1 Annex A (Martens hardness & material parameter evaluation) |
| Brand | Shimadzu |
|---|---|
| Origin | Japan |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | HMV-G Series |
| Instrument Type | Vickers Hardness Tester |
| Test Force Range | 9.807 mN – 19.61 N |
| Maximum Total Test Force | 19.61 N |
| Specimen Space | Horizontal/Vertical travel: Unlimited |
| Depth direction | Up to 200 mm for specimens wider than 120 mm |
| Brand | SOTAX |
|---|---|
| Origin | Switzerland |
| Model | AT50 |
| Instrument Type | Oscillating Hardness Tester |
| Compliance | FDA 21 CFR Part 11 Ready |
| Sample Throughput | Up to 10 distinct products per run |
| Measurement Parameters | Weight, Thickness, Width/Diameter/Length, Hardness |
| Alignment Technology | AutoAlign™ and SmartAlign™ |
| Feeding System | Multi-compartment magazine feeder (10 slots) |
| Weighing Platform | Vibration-damped, auto-centering |
| Rejection Mechanism | Real-time fragment & doublet detection |
| Software Integration | q-doc® LIMS-ready data management |
| Brand | TQC Sheen |
|---|---|
| Origin | Netherlands |
| Model | Pendulum Hardness Tester |
| Compliance | ISO 1522:2005, NBN T22-105, BS 3900-E5 |
| Dimensions (closed) | 740 × 430 × 430 mm |
| Dimensions (open) | 960 × 430 × 650 mm |
| Weight | 26 kg |
| Housing | Powder-coated steel |
| Front panel & small components | Stainless steel |
| Left side panel | Anodized aluminum |
| Lid | Perspex acrylic (6 mm thick) |
| Power supply | 110 VAC, 50/60 Hz |
| Pendulum types supported | Persoz (SP0510), König (SP0505) |
| Pivot ball material | Tungsten carbide |
| Pivot ball diameters | 8 mm (Persoz), 5 mm (König) |
| Pivot spacing | 50 mm (Persoz), 30 mm (König) |
| Oscillation period | 1.0 s (Persoz), 1.4 s (König) |
| Initial deflection angle | 12° → 4° (Persoz), 6° → 3° (König) |
| Damping time on glass reference | 430 ± 15 s (Persoz), 250 ± 10 s (König) |
| Max sample size | 105 × 200 × 11 mm (Persoz), 105 × 200 × 8.3 mm (König) |
| Counting method | Time-based oscillation decay (vibration = time) |
| Total oscillations at endpoint | 179 ± 7 |
| Adjustable pendulum mass | 500 g / 200 g |
| Brand | Yuntang |
|---|---|
| Origin | Shandong, China |
| Manufacturer Type | Manufacturer |
| Country of Origin | Domestic (China) |
| Model | YT-JNY |
| Price | USD 3,650 (approx.) |
| Measurement Range | 20–88 (arbitrary hardness units, calibrated per USP <1049> and Ph. Eur. 2.9.40 compliant soft capsule indentation scale) |
| Load Capacity Options | 50 N, 100 N, 500 N, or 1000 N |
| Resolution | 0.1 N |
| Accuracy | ±0.5% FS |
| Test Speed | 1–300 mm/min |
| Probe | Cylindrical, Ø10 mm or 10 mm² contact area |
| Upper Platen Parallelism | <0.025 mm |
| Lower Platen Diameter | 120 mm |
| Dimensions (W×D×H) | ~450 × 450 × 650 mm |
| Weight | 45 kg |
| Power Supply | 220 V, 50 Hz |
| Origin | Switzerland |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | ZSH2090 |
| Price | Upon Request |
| Body Material | Stainless Steel |
| Dimensions (L×W×H) | 102 × 92 × 55 mm |
| Weight | 2.2 kg |
| Standards Compliance | ASTM D3363, ECCA T4, MIL-C-27227, NEN 5350, SIS 184187, SNV 37113 |
| Warranty | 24 months |
| Standard Kit | 1× tester unit, 1 set of 17 graded pencils (6B to 9H), 1× 400-grit abrasive paper, 1× carrying case |
| Optional Accessories | Pencil sharpener, replacement sandpaper, additional pencil sets |
| Manufacturer | Zehntner AG, Switzerland |