Homogenizer
Filter
Showing 31–60 of 125 results
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer | ATS (Producer) |
| Type | High-Pressure Homogenizer |
| Model | AH-PILOT |
| Dimensions (W×D×H) | 500×800×500 mm |
| Processing Capacity | 200–200,000 mL per batch |
| Max Operating Pressure | 1500 bar |
| Feed Flow Rate | 15–40 L/h |
| Max Inlet Viscosity | < 2000 cP |
| Max Inlet Particle Size | < 500 µm |
| Temperature Control | On-Position Cooling (≤20 °C) |
| Motor | 5.5 kW, 3-Phase, 50 Hz, IP55, Class F Insulation |
| Lubrication | Solid Grease |
| Compliance | CE Certified, GMP-Compliant Design |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Model | AH1500 |
| Max Operating Pressure | 1500 bar (150 MPa / 22,500 psi) |
| Max Design Pressure | 1800 bar (180 MPa / 27,000 psi) |
| Flow Rate | 5–15 L/h (continuously adjustable) |
| Minimum Sample Volume | 25 mL |
| Motor Power | 2.2 kW / 380 V / 50 Hz |
| Dimensions (W×H×L) | 440 × 410 × 800 mm |
| Weight | 110 kg |
| Cooling | Integrated jacketed homogenization module with external chiller interface |
| Control | Digital pressure display (±10 bar resolution), overpressure protection, auto-circuit cutoff |
| Compliance | Designed for GMP-compliant SIP/CIP operation |
| Power Supply | Three-phase electrical only — no compressed air or water required |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Equipment Type | High-Pressure Homogenizer |
| Model | AH22-100 |
| Flow Rate | 500–600 L/h |
| Maximum Operating Pressure | 1000 bar |
| Motor Power | 18.5 kW |
| Compliance | CE Certified |
| Application Scope | Lab-scale to Pilot-scale Processing |
| Sample Compatibility | Suspensions, Emulsions, Cell Lysates, Nanosuspensions, Liposomes, Vaccine Adjuvants |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | AH22-100 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 800 × 530 × 740 mm |
| Processing Capacity | 10–500 L per batch |
| Maximum Operating Pressure | 1000 bar |
| Flow Rate | Up to 500 L/h (variable via frequency converter) |
| Cooling | Integrated in-line cooler + external chiller |
| Material of Construction | 316L stainless steel housing |
| Max Continuous Operating Temperature | 90°C |
| Compliance | ISO 9001 certified |
| Cleaning/Sterilization | CIP (Clean-in-Place) and SIP (Sterilize-in-Place) capable |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | AMH-NANO |
| Instrument Type | Microfluidic Homogenizer |
| Dimensions (W×D×H) | 986×442×385 mm |
| Throughput | 5–10 L/h |
| Operating Pressure | 0–2200 bar |
| Minimum Sample Volume | 10 mL |
| Power Supply | 380 V AC, 3-phase 4-wire |
| Power Consumption | 2.5 kW |
| Chamber Configuration | 300 µm Diamond Fixed-Geometry Interaction Chamber (pre-chamber) + 100 µm Diamond Y/Z-Type Interaction Chamber (main chamber) |
| Drive System | Servo-electric direct-drive cylinder |
| Control System | Siemens PLC + Emerson servo motion control |
| Weight | 50 kg |
| Brand | ATS |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | AH-BASIC 30 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 900 × 530 × 490 mm |
| Processing Capacity | 40 mL – 30 L/h |
| Maximum Design Pressure | 2000 bar |
| Maximum Operating Pressure | 1000 bar |
| Power Rating | 2.2 kW |
| Net Weight | 174 kg |
| Integrated Temperature Control Range | 5–10 °C |
| Brand | ATS |
|---|---|
| Origin | Canada |
| Manufacturer Type | Direct Manufacturer |
| Origin Category | Imported |
| Model | NANOJ-H10 |
| Instrument Type | High-Pressure Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 280 × 450 × 260 mm |
| Processing Volume Range | 100–5000 mL |
| Input Power | 500 W |
| Output Power | 320 W |
| Power Supply | 220 V / 50 Hz |
| Speed Range | 10,000–28,000 rpm |
| Brand | ATS Engineering Inc. |
|---|---|
| Origin | Canada |
| Manufacturer | ATS Engineering Inc. |
| Type | High-Pressure Homogenizer |
| Model | Nanoj-H30 |
| Max Operating Pressure | 2000 bar |
| Max Flow Rate | 50 mL/min |
| Minimum Sample Volume | 10 mL (with micro-volume adapter) |
| Drive System | Electric Motor |
| Temperature Control | Outlet Cup Cooling |
| Construction | Modular, GMP/FDA-Compliant Stainless Steel |
| Sealing | Full Metal Seal (O-Ring-Free) |
| Sterilization | Autoclavable Components / SIP-Capable |
| Brand | Autoscience |
|---|---|
| Origin | Tianjin, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | ATBM-400B |
| Instrument Type | Stomacher (Paddle-Beating) |
| Dimensions (W×D×H) | 217 × 240 × 364 mm |
| Sample Volume Range | 30–400 mL |
| Adjustable Plate Gap | 2–10 mm (1 mm/rev) |
| Beat Frequency | 5–9 SPS (selectable) |
| Timer Modes | Preset (30–360 s) + Fine Adjustment (5–999 s) |
| Power Supply | 220 V / 50 Hz, 200 W |
| Weight | 17 kg |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | EF-B15 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 335 × 280 × 650 mm |
| Sample Volume per Cycle | 3–15 mL |
| Construction Material | 316L Stainless Steel |
| Sterilization | Steam-Sterilizable |
| Cooling Option | Optional Heat Exchanger |
| Pressure Adjustment | Continuously Variable |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | EmulsiFlex |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 335 × 280 × 650 mm |
| Processing Volume Range | 15–1,000,000 mL |
| Wetted Materials | Metal-to-Metal & Metal-to-Ceramic Seals Only |
| Sterilization | SIP-Compatible (Steam-in-Place), All Wetted Parts Autoclavable |
| Temperature Control | Stainless Steel Heat Exchanger Included |
| Regulatory Compliance | Designed for GLP/GMP Environments, Supports 21 CFR Part 11 Audit Trail Configuration (via optional software package) |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | B15 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 335 × 280 × 650 mm |
| Sample Volume Range | 3–15 mL |
| Operating Pressure | 45,000 psi (3,100 bar) |
| Air Supply | 5–10 bar |
| Residual Volume | < 0.1 mL |
| Drive Mechanism | Pneumatic Single Plunger |
| Weight | 37 kg |
| Construction Material | ASTM-certified 316L stainless steel |
| Compliance | FDA-compliant materials, GMP-compatible design, no elastomeric seals in product path |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | EF-C3 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 530 mm × 460 mm × 760 mm |
| Processing Capacity | 0.07–3 L/h |
| Maximum Pressure | 30,000 psi |
| Minimum Sample Volume | 7 mL |
| Sterilization | Autoclavable & SIP-Compatible (Steam-in-Place) |
| Construction | Metal-to-Metal & Metal-to-Ceramic Seals, O-Ring-Free Fluid Path |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | EmulsiFlex-C3 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 530 × 460 × 760 mm |
| Processing Volume Range | 7–3000 mL |
| Maximum Operating Pressure | 200 MPa (30,000 psi) |
| Sterilization | Direct Steam-in-Place (SIP) |
| Construction Materials | FDA-compliant 316L stainless steel |
| Compliance | Designed for GMP environments, SIP-capable, seal-free fluid path |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | EF-C5 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 430 × 160 × 320 mm |
| Processing Capacity | 7 mL – 5 L/h |
| Maximum Pressure | 30,000 psi |
| Sterilization | Fully Autoclavable & SIP-Compatible |
| Valve Design | Metal-to-Metal / Metal-to-Ceramic Sealing |
| Power Requirement | None (Hydraulically Actuated) |
| Temperature Control | Integrated Jacketed System |
| Optional Integration | In-Line Extrusion Module with 50/100/200/400 nm Track-Etched Membranes |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Manufacturer | Avestin Inc., Ottawa, Canada |
| Model | EmulsiFlex-C5 |
| Instrument Type | High-Pressure Homogenizer |
| Operating Pressure Range | 500–30,000 psi (3.4–207 MPa) |
| Sample Volume Range | 7–5,000 mL |
| Flow Rate | 1–5 L/h |
| Dimensions (W×D×H) | 100 × 200 × 300 mm |
| Drive System | Pneumatic Single Plunger |
| Homogenizing Valve | Wear-Resistant Ceramic |
| Temperature Control Range | −25 to 200 °C (via external bath) |
| Sterilization | SIP (Steam-in-Place) and CIP (Clean-in-Place) compliant |
| Materials | Electropolished 316L stainless steel and FDA-compliant ceramic components |
| Regulatory Compliance | Designed and validated per GMP, FDA 21 CFR Part 11 (audit trail capable), ISO 13485, and USP <1043> for sterile processing equipment |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | EmulsiFlex-C50 |
| Maximum Operating Pressure | 30,000 psi (200 MPa) |
| Flow Rate | 15–50 L/h |
| Minimum Sample Volume | 25 mL |
| Drive Type | Pneumatic Dual-Piston |
| Chamber Material | ASTM-certified 316L stainless steel |
| Sterilization | In-line steam sterilization (SIP) |
| Compliance | FDA-compliant materials, GMP-compatible design |
| Dimensions (W×D×H) | 450 × 760 × 500 mm |
| Sample Compatibility | Aqueous & organic suspensions, liposomes, emulsions, nanocrystals, cell lysates |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Manufacturer | Avestin Inc., Ottawa, Canada |
| Model | EmulsiFlex-C55 |
| Instrument Type | High-Pressure Homogenizer |
| Dimensions (W×D×H) | 600 × 430 × 540 mm |
| Processing Volume Range | 30–55,000 mL |
| Maximum Operating Pressure | 30,000 psi (207 MPa) |
| Flow Rate | Up to 55 L/h |
| Minimum Sample Volume | 7 mL |
| Drive Mechanism | Pneumatic Dual-Piston |
| Material Construction | Electropolished ASTM F899 316L Stainless Steel |
| Sterilization | SIP/CIP-Compatible Design |
| Regulatory Compliance | FDA 21 CFR Part 11–ready architecture, GMP-compliant construction, USP <1043> and <1207> aligned |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Manufacturer | Avestin Inc., Ottawa, Canada |
| Model | EmulsiFlex-D20 |
| Instrument Type | High-Pressure Homogenizer |
| Operating Pressure | 35,000 psi (2,413 bar), typical working pressure up to 30,000 psi (2,070 bar) |
| Flow Rate | 20 L/h |
| Minimum Sample Volume | 50 mL |
| Residual Volume | < 1 mL |
| Drive System | Electric single-plunger pump |
| Dimensions | 730 × 600 × 640 mm |
| Weight | 120 kg |
| Power Supply | 3-phase, 50/60 Hz, 230/400 V |
| Safety Features | Automatic circuit cutoff, transient overpressure tolerance up to +20% |
| Construction Material | 316L stainless steel (entire fluid path) |
| Compliance | GMP-compliant design, FDA-compliant materials per 21 CFR Part 11 and USP <1058>, zero elastomeric seals in product-contact zones |
| Optional Accessories | Sterile filtration extruder, integrated heat exchanger |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | LF-1 |
| Type | Manual Piston-Driven Extrusion Device |
| Dimensions (W×D×H) | 280 × 40 × 40 mm |
| Sample Volume Range | 0–1 mL |
| Membrane Compatibility | Polycarbonate (PC) Track-Etched Filters (common pore sizes: 100 nm, 200 nm, 400 nm, 800 nm, 1 µm) |
| Construction | Stainless Steel Housing & Anodized Aluminum Components |
| Residual Volume | < 5 µL |
| Regulatory Compliance | Designed for GLP-compliant lab environments |
| Brand | Avestin |
|---|---|
| Origin | Canada |
| Model | LF-50 |
| Instrument Type | High-Pressure Extrusion System |
| Dimensions (W×D×H) | 280 × 460 × 260 mm |
| Sample Volume Range | 5–50 mL per run |
| Compatible Membrane Pore Sizes | 10 nm – 1.0 µm (polycarbonate track-etched membranes) |
| Maximum Operating Pressure | 10,000 psi (69 MPa) |
| Material Contact Path | 316 Stainless Steel, PTFE, and Anodized Aluminum |
| Compliance | Designed for GLP-compliant lab environments |
| Brand | AVESTIN |
|---|---|
| Origin | Canada |
| Model | LipoSofast |
| Sample Volume per Cycle | 1 mL (2 × 500 µL syringes) |
| Minimum Sample Volume | 0.1 mL |
| Residual Volume | 0 µL |
| Available Polycarbonate (PC) Membrane Pore Sizes | 50, 100, 200, 400, and 800 nm |
| Temperature Compatibility | Water-bath compatible for thermal control (e.g., 4–40 °C) |
| Weight | < 2 kg |
| Construction | Borosilicate glass syringes, stainless steel housing, chemically resistant seals |
| Brand | CZGY |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Instrument Type | Probe-Type Rotor-Stator Homogenizer |
| Dimensions (W×D×H) | 320 × 200 × 380 mm |
| Processing Volume Range | 10–3000 mL |
| Motor Speed | 25,000 rpm |
| Small Homogenizing Probe Max Speed | 22,000 rpm |
| Large Homogenizing Probe Max Speed | 20,000 rpm |
| Continuous Operation Limit | <5 min |
| Power Rating | 185 W |
| Input Voltage | 220 V AC, 50 Hz |
| Speed Control | Thyristor-Based Analog Regulation |
| Speed Sensing | Photoelectric Tachometry |
| Brand | CZGY |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | FS-1 |
| Power Consumption | 200 W |
| Input Voltage | 220 V ±10%, 50 Hz ±5 |
| Speed Range | 0–20,000 rpm (continuously adjustable) |
| Dimensions | 500 × 370 × 350 mm |
| Weight | 14 kg |
| Sample Vessel Capacity Options | 1–5 mL, 5–15 mL, 15–25 mL, 25–50 mL, 50–100 mL, 100–150 mL |
| Cooling/Heating Compatibility | Six temperature-controlled sample cups (compatible with external hot/cold baths) |
| Motor Type | 200 W single-phase series-wound micro-motor |
| Operating Mode | Continuous duty |
| Brand | CZGY |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | FS-2 |
| Motor Speed | 25,000 rpm |
| Small Homogenizing Blade Max Speed | 22,000 rpm |
| Large Homogenizing Blade Max Speed | 20,000 rpm |
| Continuous Operation Limit | <5 min |
| Power | 185 W |
| Voltage | 220 V ±10%, 50 Hz |
| Compliance | Designed for GLP-compliant laboratory workflows |
| Warranty | 24 months limited warranty on materials and workmanship |
| Brand | CZGY |
|---|---|
| Origin | Jiangsu, China |
| Manufacturer Type | Direct Manufacturer |
| Model | FSH-2 |
| Motor Speed | 25,000 rpm |
| Small Homogenizing Probe Max Speed | 22,000 rpm |
| Large Homogenizing Probe Max Speed | 20,000 rpm |
| Continuous Operation Limit | <5 minutes |
| Power Rating | 200 W |
| Input Voltage | 220 V ±10%, 50 Hz |
| Speed Control | Silicon Controlled Rectifier (SCR) System |
| Speed Monitoring | Photocell-based Digital Tachometry |
| Display | LED Panel with Real-Time RPM Readout |
| Compliance | Designed for GLP-aligned laboratory workflows |
| Origin | Germany |
|---|---|
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | DAS 200 |
| Pricing | Available Upon Request |
| Brand | DELEITE |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Category | Domestic |
| Model | HM400S |
| Instrument Type | Paddle-Beater (Stomacher-Style) |
| Dimensions (W×D×H) | 420 × 230 × 330 mm |
| Processing Volume Range | 10–400 mL |
| Control System | Microprocessor-based with 8-step programmable sequence |
| Display | 4.3-inch capacitive touchscreen |
| Operation Interface | Touchscreen-only |
| Beating Time Range | 0.1–99 min 59 sec or continuous mode |
| Beater Plate Material | Stainless steel (304) with proprietary elastomeric compression sleeve |
| Beating Frequency | 3–12 cycles/sec |
| Effective Sample Volume Capacity | 3–400 mL |
| Sterile Bag Size Compatibility | 17 × 30 cm |
| Chamber Construction | Stainless steel housing with corrosion-resistant epoxy powder coating |
| Adjustable Beater Gap | 0–50 mm |
| Soft-Start Activation | Yes |
| Pause Function | Yes |
| Power Supply / Rated Power | 220 V AC, 50/60 Hz / 200 W |
| Anti-Pinch Safety Mechanism | Automatic motor cutoff upon door obstruction detection |
| Viewing Window | Removable tempered glass safety door |
| Audible Operation Feedback | Voice prompts for status and error conditions |
| Net Weight | 18 kg |
| Outer Carton Dimensions (L×W×H) | 540 × 310 × 410 mm |
| Brand | Domel |
|---|---|
| Origin | Imported (Non-Chinese) |
| Manufacturer Type | Authorized Distributor |
| Instrument Type | Bead-Based Mechanical Homogenizer |
| Model | MillMix 20 |
| Price | €1,000 (Reference Only) |
| Dimensions (W×D×H) | 365 × 405 × 225 mm |
| Sample Volume Range | 0.2–50 mL per tube |
| Oscillation Frequency | 3–30 Hz (180–1,800 cycles/min) |
| Amplitude | 32 mm |
| Timer Range | 5 s–60 min or continuous mode |
| Power Supply | 230 V / 50 Hz |
| Weight | 42 kg |
| Motor Type | Brushless DC Motor |
| Display | LED Parameter Display |
| Control Interface | Single-knob operation for speed and time |
| Brand | GLTlab |
|---|---|
| Origin | Guangdong, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | TR-10B |
| Dimensions (W×D×H) | 556 × 543 × 98 mm |
| Maximum Load Capacity | 10 kg |
| Speed Range | 5–300 rpm |
| Timing Range | 1 s – 200 h |
| Roller Dimensions | 340 × 30 mm |
| Roller Count | 10 |
| Control System | CNC Digital Interface |
| Sample Vessel Compatibility | Up to five 1 L bottles + five 500 mL bottles, or three 5 L bottles |
| Net Weight | 10 kg |
| Application Scope | Solid–solid, solid–liquid, and high-viscosity liquid homogenization |