Incubator Equipment
Filter
Showing 361–390 of 418 results
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | DHPF-9209 |
| Pricing | Available Upon Request |
| Internal Dimensions (D×W×H) | Not Specified |
| Operating Ambient Temperature | 5–35 °C |
| Operating Ambient Humidity | ≤85% RH |
| Warranty | 12 months from commissioning, lifetime technical support |
| Safety Features | Independent chamber overtemperature protection |
| Design | Energy-efficient, low-noise operation |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-1000L |
| Heating Method | Air-Jacketed |
| Cooling Method | Compressor-Based Refrigeration |
| Air Circulation | Forced Convection |
| Temperature Range | 15–50 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Uniformity | <2.0 °C (at 37 °C) |
| Chamber Capacity | 1000 L |
| External Dimensions (W×D×H) | 1190 × 1510 × 1760 mm |
| Operating Environment | 5–35 °C ambient, ≤85% RH |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-150L |
| Cooling Method | Compressor-based cooling |
| Air Circulation | Forced convection |
| Temperature Range | 4–50 °C |
| Temperature Uniformity | ±1 °C |
| Chamber Capacity | 150 L |
| External Dimensions (W×D×H) | 720 × 650 × 1210 mm |
| Operating Environment | Ambient temperature 5–35 °C |
| Compliance Standard | GB/T 28851–2012 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-250L |
| Cooling Method | Compressor-based cooling |
| Air Circulation | Forced convection |
| Temperature Range | 4–50 °C |
| Temperature Uniformity | ±1 °C |
| Chamber Capacity | 250 L |
| External Dimensions (W×D×H) | 720 × 650 × 1560 mm |
| Operating Environment | Ambient Temperature 5–35 °C, Relative Humidity ≤85% RH |
| Compliance Standard | GB/T 28851–2012 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | SHH-400L |
| Cooling Method | Compressor-based cooling |
| Air Circulation | Forced convection |
| Temperature Range | 15–50 °C |
| Temperature Uniformity | ±1 °C |
| Chamber Capacity | 400 L |
| External Dimensions (W×D×H) | 790 × 1110 × 1760 mm |
| Operating Environment | 5–35 °C ambient temperature, ≤85% RH |
| Compliance Standard | GB/T 28851–2012 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-500L |
| Cooling Method | Compressor-based Cooling |
| Air Circulation | Forced Convection |
| Temperature Range | 15–50 °C |
| Temperature Uniformity | ±1 °C |
| Chamber Capacity | 500 L |
| External Dimensions (W×D×H) | 990 × 1110 × 1760 mm |
| Compliance Standard | GB/T 28851–2012 |
| Data Recording | Integrated Thermal Printer with Adjustable Print Interval |
| Safety Protections | Independent Over-Temperature Cut-off, Compressor Overload Protection, SMS Alert System (Power Failure & Deviation) |
| Remote Monitoring | LAN/WAN-enabled |
| Environmental Operating Conditions | Ambient Temperature 5–35 °C, Humidity ≤85% RH |
| Warranty | 12 Months On-Site Parts & Labor, Lifetime Technical Support |
| Validation Support | IQ/OQ Documentation and Execution Services Available |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Model | SHH-500SD |
| Heating Method | Air-jacketed Heating |
| Cooling Method | Compressor-based Refrigeration |
| Humidification Water Tank | External Reservoir |
| Temperature Range (with Humidification) | 15–65 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2 °C |
| Humidity Range | 15–95 %RH |
| Humidity Accuracy | ±5 %RH |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | SHH-J Series |
| Price Range | USD 2,800 – 7,000 |
| Control Interface | Mechanical Push-Button Panel |
| Air Circulation | Forced Convection |
| Temperature Range | 4–50 °C |
| Temperature Fluctuation | ±1 °C |
| Temperature Uniformity | ±2 °C |
| Humidity Range | ≤85% R.H. |
| Humidity Fluctuation | Not Specified |
| Chamber Capacities | 150 L / 250 L / 400 L / 1000 L |
| External Dimensions (W×D×H, mm) | 800×710×1390 |
| Internal Dimensions (W×D×H, mm) | 670×600×1250 |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-L Series |
| Heating Method | Air-Jacketed Heating |
| Cooling Method | Compressor-Based Refrigeration |
| Air Circulation | Forced Convection |
| Temperature Range | 4–50 °C |
| Temperature Accuracy | ±0.1 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±2.0 °C (at 37 °C) |
| Chamber Capacities | 150 L, 250 L, 400 L, 500 L, 1000 L |
| External Dimensions (D×W×H, mm) | 720×650×1210 |
| Operating Environment | Ambient Temperature 5–35 °C, Relative Humidity ≤85% RH |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SD-2TA |
| Heating Method | Air-Jacketed |
| Cooling Method | Compressor-Based |
| Humidification Water Reservoir | External Tank |
| Temperature Range (with Humidification) | 15–65°C |
| Temperature Range (without Humidification) | 15–65°C |
| Temperature Fluctuation | ±0.5°C |
| Temperature Uniformity | ±1.0°C |
| Humidity Range | 15–95% RH |
| Humidity Accuracy | ±3% RH |
| Chamber Capacities Available | 220 L, 500 L, 800 L, 1000 L, 2000 L, 3000 L |
| Brand | YSEI |
|---|---|
| Origin | Chongqing, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | SHH-SDT-2TA |
| Heating Method | Air-Jacketed |
| Cooling Method | Compressor-Based |
| Humidification Water Tank | External |
| Temperature Range (with Humidification) | 15–65 °C |
| Temperature Range (without Humidification) | 15–65 °C |
| Temperature Fluctuation | ±0.5 °C |
| Temperature Uniformity | ±1 °C |
| Humidity Range | 15–95 %RH |
| Humidity Accuracy | ±3 %RH |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2050 |
| Pricing | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric (Air-Jacketed) |
| Display | LCD |
| Air Circulation | Top-Mounted Micro-Airflow System |
| Door Configuration | Dual Doors (Inner Tempered Glass Observation Door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | RT + 5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programming Capacity | 10 Segments / 18 Steps |
| Step Duration Range | 1–999 minutes per step |
| Chamber Volume | 50 L |
| Interior Dimensions (W×D×H) | 350 × 350 × 410 mm |
| External Dimensions (W×D×H) | 470 × 465 × 760 mm |
| Net Weight | 33 kg |
| Power Consumption | 350 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Shelving | 2 Standard Stainless Steel Electropolished Shelves (Expandable to 4) |
| Interior Material | Mirror-Finish Stainless Steel |
| Safety Systems | Independent Over-Temperature Protection (Adjustable 30–80 °C), Independent Over-Heat Prevention Device, Leakage Current & Over-Current Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Data Interface | RS-232 Serial Port |
| Optional Output | Embedded Thermal Printer |
| Additional Functions | Auto Start/Stop, Clock Display, Parameter Memory with Password Protection, Temperature Display Calibration, Power Recovery After Interruption, Monitoring Timer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2080 |
| Pricing | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric (Air-Jacketed) |
| Display | LCD |
| Air Circulation | Top-Mounted Micro-Airflow System |
| Door Configuration | Dual Doors (Inner Tempered Glass Viewing Door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Setpoint Modes | Fixed-Value or Stepwise Programming |
| Program Structure | 10 Segments (Segment “0” = Pre-Set Standby |
| Step Duration Range | 1–999 Minutes per Step |
| Temperature Range | Ambient +5 °C to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C at 37 °C |
| Chamber Capacity | 80 L |
| Interior Dimensions (W×D×H) | 400 × 400 × 500 mm |
| External Dimensions (W×D×H) | 520 × 515 × 850 mm |
| Net Weight | 40 kg |
| Power Consumption | 400 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Shelf Quantity | 2 Standard (Expandable to 4) |
| Safety Systems | Independent Over-Temperature Protection (Adjustable 30–80 °C), Independent Over-Heat Prevention Device, Leakage Current & Over-Current Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Data Interface | RS-232 Serial Port |
| Optional Output | Embedded Micro-Printer |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Finish | Electro-Polished Stainless Steel |
| Airflow Design | Optimized 3D Convection Pathway |
| Surface Finish | Aesthetic, High-Gloss Exterior Enclosure |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2120 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric Heating |
| Display | LCD |
| Air Circulation | Top-mounted Micro-airflow System |
| Door Configuration | Dual-door (inner tempered glass observation door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | RT + 5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programmable Stages | 10 segments (Segment “0” = preset timing |
| Total Steps | 18 |
| Step Duration Range | 1–999 minutes per step |
| Chamber Capacity | 120 L |
| Interior Dimensions (W×D×H) | 450 × 450 × 600 mm |
| External Dimensions (W×D×H) | 570 × 565 × 950 mm |
| Net Weight | 51 kg |
| Power Consumption | 500 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Safety Features | Independent over-temperature cut-off (adjustable 30–80 °C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Data Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Interior Material | Mirror-finish stainless steel |
| Shelf Finish | Electro-polished stainless steel |
| Airflow Design | Optimized 3D laminar micro-circulation duct system |
| Diagnostic Functions | Self-diagnostic firmware with real-time status logging |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2160 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric Heating |
| Display | LCD |
| Air Circulation | Top-mounted Micro-airflow System |
| Door Configuration | Dual-door (inner tempered glass observation door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | RT + 5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programmable Segments/Steps | 10 segments (Segment “0” = pre-scheduled standby |
| Step Duration Range | 1–999 minutes per step |
| Chamber Capacity | 160 L |
| Interior Dimensions (W×D×H) | 500 × 500 × 650 mm |
| External Dimensions (W×D×H) | 620 × 615 × 1000 mm |
| Net Weight | 57 kg |
| Power Consumption | 500 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Safety Features | Independent over-temperature prevention (adjustable 30–80 °C), independent thermal cutoff, leakage current protection, over-current trip, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Auxiliary Functions | Auto-start/auto-stop, elapsed time monitoring timer, power recovery mode, parameter memory with password protection, display calibration, RS-232 serial interface, built-in micro-printer output |
| Interior Construction | Mirror-finish stainless steel chamber, electropolished stainless steel shelves (standard 2, max 4), optimized cleanroom-grade cavity geometry |
| Airflow Design | Balanced 3D laminar micro-circulation ducting |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXDP-A2270 |
| Quotation | Upon Request |
| Control Method | Fuzzy Logic Control |
| Heating Mode | Electric Heating |
| Display | LCD |
| Air Circulation | Top-mounted Micro-airflow System |
| Door Configuration | Dual-door (inner tempered glass observation door) |
| Ambient Operating Temperature Range | 5–35 °C |
| Temperature Control Range | Ambient +5 to 60 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Temperature Uniformity | ≤ ±1.0 °C (at 37 °C) |
| Programming Capacity | 10 Segments / 18 Steps (Segment “0” = Pre-set Timing |
| Step Duration Range | 1–999 minutes per step |
| Chamber Volume | 270 L |
| Interior Dimensions (W×D×H) | 600 × 550 × 820 mm |
| External Dimensions (W×D×H) | 720 × 665 × 1170 mm |
| Net Weight | 90 kg |
| Power Consumption | 700 W |
| Electrical Supply | AC 220 V, 50/60 Hz |
| Safety Features | Independent Over-temperature Prevention (adjustable 30–80 °C), Independent Overheat Protection, Leakage Current & Overcurrent Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Auxiliary Functions | Auto Start/Stop, Monitoring Timer, Power Recovery Mode, Parameter Memory, Temperature Display Calibration, RS-232 Communication Interface, Embedded Thermal Printer Output |
| Interior Material | Mirror-finish Stainless Steel |
| Shelf Configuration | 2 standard shelves (expandable to 4) |
| Airflow Design | Optimized 3D laminar micro-circulation duct system |
| Surface Finish | Electropolished stainless steel shelving, Cleanroom-compatible cavity geometry |
| Brand | ZHICHENG |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic (China-Made) |
| Model | ZXDR-2430 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Model | ZXDR-2800 |
| Display | 7-inch 800×480-pixel 65K-color touchscreen |
| Control System | PID microprocessor-based environmental scanning controller |
| Temperature Range | Ambient +5°C to 65°C |
| Temp. Resolution | ≤±0.1°C |
| Temp. Uniformity | ≤±0.3–1.0°C |
| Temp. Stability (Fluctuation) | ≤±0.1°C |
| Chamber Volume | 800 L |
| Internal Dimensions (W×D×H) | 840×800×1200 mm |
| External Dimensions (W×D×H) | 990×905×1690 mm |
| Net Weight | 168 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Heating Power | 1500 W |
| Air Circulation | Forced convection with optimized micro-airflow duct design |
| Door | Double-layer door with inner safety glass panel |
| Safety Features | Triple independent protection — leakage/overcurrent cutoff, backup thermal cut-off, adjustable overtemperature limiter, self-diagnostic alarm system |
| Programmability | 9-segment / 18-step programmable cycle with ramp-hold capability (max. 999.9 min per segment) |
| Compliance | Designed for GLP-compliant laboratories |
| Optional Interfaces | RS-232 serial port |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5090 |
| Pricing | Upon Request |
| Capacity | 90 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Programmability | 10 segments / 18 steps |
| Segment Duration | 1–999 minutes per step |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward forced convection from bottom heater |
| Internal Chamber Dimensions (W×D×H) | 400 × 445 × 485 mm |
| External Dimensions (W×D×H) | 590 × 575 × 865 mm |
| Net Weight | 55 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1100 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Data Interface | RS-232 port |
| Optional Output | Embedded thermal microprinter |
| Insulation | Double-wall insulated chamber with outer door glass compliant with EN 61000-3-2 and EN 61000-6-3 safety standards |
| Interior Material | Mirror-finish stainless steel |
| Door | Tempered double-glazed inner door |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5140 |
| Quotation | Upon Request |
| Capacity | 140 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward convection from bottom-mounted heater |
| Programming | 10 segments / 18 steps (Segment 0 = pre-set timing |
| Step Duration | 1–999 minutes per step |
| Internal Dimensions (W×D×H) | 500×470×600 mm |
| External Dimensions (W×D×H) | 690×600×980 mm |
| Net Weight | 80 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1600 W |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Insulation | High-efficiency mineral wool with double-wall construction |
| Interior Material | Mirror-finish stainless steel |
| Door | Double-glazed tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5250 |
| Quotation | Upon Request |
| Capacity | 250 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤ ±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Mode | Vertical Forced Convection from Bottom |
| Programmability | 10 Segments / 18 Steps |
| Time per Step | 1–999 min |
| Interior Dimensions (W×D×H) | 600 × 550 × 750 mm |
| External Dimensions (W×D×H) | 790 × 680 × 1220 mm |
| Net Weight | 108 kg |
| Power Rating | 2100 W |
| Voltage/Frequency | AC 220 V, 50/60 Hz |
| Safety Features | Independent Over-Temperature Protection (adjustable 30–80°C), Overheat Prevention Device, Leakage Current & Overcurrent Circuit Breaker, Power Failure Alarm, Sensor Fault Detection, Upper/Lower Limit Temperature Alarms |
| Connectivity | RS-232 Interface, Embedded Micro-Printer Output |
| Interior Material | Mirror-Finish Stainless Steel |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Insulation | High-Efficiency Ceramic Fiber with Triple-Layer Door Sealing |
| Compliance | Designed per IEC 61010-1 (Safety Requirements for Electrical Equipment for Measurement, Control, and Laboratory Use) |
| Brand | ZhiCheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region of Origin | Domestic (China) |
| Model | ZXFD-A5430 |
| Pricing | Upon Request |
| Capacity | 430 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward convection from bottom-mounted blower |
| Programming | 10 segments / 18 steps (Segment 0 = pre-set timing |
| Step Duration | 1–999 minutes per step |
| Internal Dimensions (W×D×H) | 700 × 650 × 950 mm |
| External Dimensions (W×D×H) | 890 × 780 × 1420 mm |
| Net Weight | 170 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 3100 W |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms, self-diagnostic system |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal microprinter |
| Insulation | High-efficiency ceramic fiber + double-wall construction |
| Interior Material | Mirror-finish 304 stainless steel |
| Door | Double-glazed tempered glass with outer layer compliant with EN 61000-3-2 safety standards |
| Heating System | Full-perimeter, bottom-mounted heating elements with 360° radiant and convective heat distribution |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Country of Origin | China |
| Model | ZXFD-A5600 |
| Pricing | Upon Request |
| Capacity | 600 L |
| Temperature Range | Ambient +5°C to 200°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±2.5% (at max operating temperature) |
| Temperature Fluctuation | ≤±1°C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Airflow Direction | Vertical upward from bottom |
| Programmability | 10 segments / 18 steps (Segment 0 = pre-set timer |
| Step Duration | 1–999 minutes per step |
| Interior Dimensions (W×D×H) | 800 × 780 × 1000 mm |
| External Dimensions (W×D×H) | 990 × 910 × 1470 mm |
| Net Weight | 210 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 3700 W |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Safety Features | Independent over-temperature protection (adjustable 30–80°C), independent overheat prevention device, leakage current & overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Connectivity | RS-232 interface, embedded micro-printer output |
| Insulation | Dual-layer door with outer tempered glass compliant with EN 61000-3-2 and EN 60529 IP20 safety requirements |
| Interior Material | Mirror-finish stainless steel |
| Door | Double-glazed tempered glass inner door |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXGP-A2050 |
| Quotation | Available Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±1.0°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.5°C |
| Chamber Capacity | 50 L |
| Internal Dimensions (W×D×H) | 350 × 350 × 410 mm |
| External Dimensions (W×D×H) | 510 × 475 × 780 mm |
| Net Weight | 35 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 510 W |
| Control System | Fuzzy Logic Microprocessor |
| Display | LCD |
| Air Circulation | Top-mounted micro-airflow circulation |
| Door Configuration | Dual-door (outer insulated door + inner tempered glass observation door) |
| Programmability | 10 segments / 18 steps, segment time adjustable from 1–999 minutes |
| Safety Features | Independent overtemperature cut-off (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Data Interface | RS-232 serial port |
| Optional Output | Embedded thermal mini-printer |
| Shelving | 2 standard stainless steel electropolished shelves (expandable to 4) |
| Interior Material | Mirror-finish 304 stainless steel |
| Compliance | Designed for GLP-compliant laboratory environments |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXGP-A2080 |
| Quotation | Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±1.0°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.5°C |
| Chamber Capacity | 80 L |
| Internal Dimensions (W×D×H) | 400 × 400 × 500 mm |
| External Dimensions (W×D×H) | 560 × 525 × 870 mm |
| Net Weight | 45 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 810 W |
| Control Logic | Fuzzy Logic Algorithm |
| Display | LCD |
| Air Circulation | Top-mounted micro-airflow system |
| Door Configuration | Dual-door (outer insulated door + inner tempered glass observation door) |
| Programming Capability | 10 segments / 18 steps, step duration 1–999 minutes |
| Safety Systems | Independent over-temperature protection (adjustable 30–80°C), independent overheat prevention device, leakage current & overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms |
| Data Interface | RS-232 serial port |
| Optional Output | Embedded thermal printer |
| Additional Functions | Auto-start/auto-stop, clock display, power recovery mode, parameter memory with password protection, temperature display calibration, monitoring timer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Product Category | Domestic |
| Model | ZXGP-A2160 |
| Pricing | Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤ ±1.0°C (at 37°C) |
| Temperature Fluctuation | ≤ ±0.5°C |
| Chamber Capacity | 160 L |
| Interior Dimensions (W×D×H) | 500 × 500 × 650 mm |
| External Dimensions (W×D×H) | 660 × 625 × 1020 mm |
| Net Weight | 78 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1210 W |
| Door Configuration | Dual-door (outer insulated door + inner tempered glass observation door) |
| Air Circulation | Top-mounted micro-airflow circulation |
| Control Logic | Fuzzy logic algorithm |
| Programming Capability | 10 segments / 18 steps (Segment “0” = pre-set standby |
| Step Duration Range | 1–999 minutes per step |
| Display | LCD with real-time parameter readout |
| Communication Interface | RS-232 |
| Data Output | Embedded thermal mini-printer |
| Safety Systems | Independent overtemperature cutoff (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent circuit breaker, power failure alarm, sensor fault detection, upper/lower temperature limit alarms, self-diagnostic monitoring timer |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Region Classification | Domestic (China) |
| Model | ZXGP-A2270 |
| Quotation | Upon Request |
| Heating Method | Water-jacketed |
| Temperature Range | Ambient +5°C to 60°C |
| Temperature Resolution | 0.1°C |
| Temperature Uniformity | ≤±1.0°C at 37°C |
| Temperature Fluctuation | ≤±0.5°C |
| Programming Capacity | 10 segments / 18 steps |
| Time per Step | 1–999 minutes |
| Display | LCD |
| Air Circulation | Top-mounted micro-airflow system |
| Chamber Volume | 270 L |
| Interior Dimensions (W×D×H) | 600×600×750 mm |
| External Dimensions (W×D×H) | 760×725×1120 mm |
| Net Weight | 115 kg |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1800 W |
| Safety Features | Independent overtemperature cutoff (adjustable 30–80°C), independent overheat prevention device, leakage current protection, overcurrent trip, power-failure alarm, sensor fault detection, upper/lower limit temperature alarms |
| Interface | RS-232 serial port |
| Optional Output | Embedded thermal printer |
| Shelving | 2 standard stainless steel electropolished shelves (max. 4) |
| Interior Material | Mirror-finish stainless steel |
| Door Configuration | Dual-door design with inner tempered glass observation window |
| Control Algorithm | Fuzzy logic control |
| Operating Ambient | 5–35°C |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | ZXJD-A1160 |
| Pricing | Upon Request |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Classification | Domestic (China) |
| Model | ZXJD-A1270 |
| Pricing | Upon Request |
| Capacity | 270 L |
| Temperature Range | 4–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Control Method | Fuzzy Logic Control |
| Display | LCD |
| Air Circulation | Forced Convection (Turbine Fan) |
| Door Configuration | Dual-layer Door with Tempered Glass Inner Window |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 850 W |
| Net Weight | 130 kg |
| Internal Dimensions (W×D×H) | 600 × 600 × 750 mm |
| External Dimensions (W×D×H) | 730 × 740 × 1460 mm |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Safety Features | Independent Over-Temperature Prevention (30–80 °C adjustable), Independent Overheat Protector, Leakage & Overcurrent Circuit Breaker, Refrigeration Overload Protection |
| Programmability | Up to 10 segments / 18 steps, step duration 1–999 min |
| Humidity Control | Optional dual-mode (dry-wet or constant-humidity operation) |
| Water Supply System | Dual-stage automatic reservoir with self-filling design |
| Additional Options | Embedded thermal printer, RS-232 communication interface |
| Brand | Zhicheng |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Direct Manufacturer |
| Regional Category | Domestic (China) |
| Model | ZXJD-A1430 |
| Pricing | Upon Request |
| Capacity | 430 L |
| Temperature Range | 4–65 °C |
| Temperature Resolution | 0.1 °C |
| Temperature Uniformity | ≤ ±1 °C (at 37 °C) |
| Temperature Fluctuation | ≤ ±0.5 °C |
| Control Mode | Fuzzy Logic |
| Programming | 10 segments × 18 steps |
| Step Duration | 1–999 min per step |
| Door Type | Dual-layer door with tempered glass observation window (inner insulated glass door) |
| Air Circulation | Forced convection with turbine fan |
| Inner Chamber Material | Mirror-finish stainless steel |
| Shelf Quantity | 2 standard (up to 4 optional) |
| Power Supply | AC 220 V, 50/60 Hz |
| Rated Power | 1200 W |
| Net Weight | 108 kg |
| Internal Dimensions (W×D×H) | 700 × 645 × 950 mm |
| External Dimensions (W×D×H) | 830 × 785 × 1660 mm |
| Safety Features | Independent over-temperature prevention (adjustable 30–80 °C), independent overheat protector, leakage & overcurrent circuit breaker, refrigeration overload protection |
| Auxiliary Functions | Monitoring timer, power failure recovery, parameter memory, temperature display calibration, Φ50 mm test port |
| Optional | Built-in refrigeration (air-cooled R134a, power-controlled) |
| Humidity Control | Available in dry-wet and constant-humidity configurations (model-specific) |