Instrument Certification and Calibration
Filter
Showing all 11 results
| Brand | Agilent Technologies |
|---|---|
| Origin | USA |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Origin | Imported |
| Model | CrossLab Multi-Vendor Regulatory Compliance Certification Service |
| Quotation | Available upon Request |
| Service Type | Instrument Regulatory Certification |
| Instrument Category | General Laboratory Analytical Instruments (LC, GC, UV-Vis, FTIR, ICP-MS, etc.) |
| Industry Experience | 50+ Years |
| Response Time | Within 24 Hours |
| Scope of Certification | Full Regulatory Compliance Assessment and Documentation per Applicable Standards (e.g., FDA 21 CFR Part 11, ISO/IEC 17025, ASTM E2500, USP <1058>, GxP) |
| Brand | Metrohm |
|---|---|
| Origin | Beijing, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Service Type | Instrument Certification |
| Scope | Installation Qualification (IQ) and Operational Qualification (OQ) |
| Documentation | Fully traceable digital IQ/OQ protocols compliant with GxP and 21 CFR Part 11 |
| Delivery Model | On-site and remote software validation supported |
| Lifecycle Coverage | DQ, IQ, OQ, PV, PQ, periodic requalification, and decommissioning support |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor |
| Product Origin | Domestic (China) |
| Model | ACC |
| Service Type | Instrument Calibration |
| Application Scope | Balances and Scales |
| Experience | 1–10 Years |
| Response Time | 24–48 Hours |
| Calibration Scope | Full-range performance evaluation including measurement uncertainty quantification |
| Regulatory Alignment | Supports ISO/IEC 17025, USP <41>, <1251>, ASTM E898, and FDA 21 CFR Part 11 audit-trail requirements for documented calibration evidence |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Manufacturer Status | Authorized Distributor |
| Origin Category | Imported |
| Service Type | Instrument Calibration |
| Instrument Type | Analytical Instruments |
| Service Experience | 100 Years |
| Response Time | Within 24 Hours |
| Certification/Calibration Scope | Traceable calibration ensuring reliable weighing results compliant with local and international regulatory requirements |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | Laboratory Equipment Calibration Service |
| Service Type | Instrument Calibration |
| Instrument Types | General Laboratory Equipment |
| Industry Experience | 100 Years |
| Response Time | Within 24 Hours |
| Scope of Calibration | Comprehensive metrological verification and uncertainty evaluation for laboratory weighing instruments and ancillary measurement devices |
| Compliance Coverage | ISO/IEC 17025, ASTM E898, USP <41>, EU GMP Annex 11, FDA 21 CFR Part 11 (audit trail enabled), GLP/GMP traceability requirements |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Service Type | Instrument Calibration |
| Equipment Category | Laboratory Common Equipment |
| Service Experience | 100 Years |
| Response Time | Within 24 Hours |
| Scope of Certification/Calibration | Performance Verification, Uncertainty-Evaluated Calibration, and Preventive Maintenance per ISO 8655 and JJG 646 |
| Brand | METTLER TOLEDO |
|---|---|
| Origin | Switzerland |
| Manufacturer Status | Authorized Distributor |
| Product Origin | Imported |
| Service Type | Instrument Calibration & Preventive Maintenance |
| Instrument Category | Analytical Instrumentation |
| Service Experience | 100 Years |
| Response Time | Within 24 Hours |
| Scope of Certification/Calibration | Drive Mechanism, Burette Assembly, Signal Board Verification |
| Compliance Framework | ISO/IEC 17025, ASTM E2026, USP <797> & <1225>, GLP/GMP-Aligned Documentation |
| Brand | PerkinElmer |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Original Equipment Manufacturer (OEM) |
| Product Category | Domestic |
| Service Model | Laboratory Compliance Program |
| Price Range | USD 2,800 – 7,000 (based on scope and instrument count) |
| Service Type | Instrument Qualification & Computerized System Validation |
| Covered Equipment Types | General Laboratory Instruments (e.g., HPLC, GC, UV-Vis, balances, pipettes, environmental chambers) |
| Years of Experience | 10+ |
| Response Time | Within 24 hours |
| Qualification Scope | Installation Qualification (IQ), Operational Qualification (OQ), Performance Qualification (PQ) |
| Regulatory Alignment | FDA 21 CFR Part 11, GAMP 5, ISO/IEC 17025, ASTM E2500, USP <1058>, ICH Q2(R2), GLP/GMP Annex 11 |
| Brand | Q-Lab |
|---|---|
| Origin | USA |
| Manufacturer Status | Original Equipment Manufacturer (OEM) |
| Product Type | Imported Instrument Calibration Service |
| Service Model | Irradiance Calibration |
| Service Category | Instrument Certification and Calibration |
| Regulatory Compliance | ISO/IEC 17025 Accredited (A2LA & UKAS) |
| Applicable Standards | ASTM G177, ASTM G137, ISO 4892-2, ISO 4892-3 |
| Brand | RIKEN KEIKI |
|---|---|
| Origin | Shanghai, China |
| Manufacturer Type | Authorized Distributor & Calibration Provider |
| Product Category | Domestic |
| Model | Gas Detection Instrument Calibration & Maintenance Service Package |
| Service Type | Traceable Calibration & Functional Verification |
| Industry Coverage | Petrochemical, Natural Gas, Metallurgy, Marine, Semiconductor & LCD Manufacturing, Solar PV, Fuel Cells |
| Accreditation | CNAS ISO/IEC 17025:2017 (Calibration Laboratory) |
| Quality Certifications | ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 |
| Technical Staff | 1 Senior Engineer, 2 Registered Metrologists, 14 Field Service Engineers (CNAS-qualified & OEM-trained) |
| Response Time | ≤24 hours |
| Service Experience | 10 years in semiconductor cleanroom gas safety compliance |
| Brand | TCT |
|---|---|
| Origin | Fujian, China |
| Manufacturer Type | Authorized Distributor |
| Country of Origin | China |
| Model | Handset OBD-DCD |
| Service Type | Instrument Calibration |
| Calibration Scope | OBD Diagnostic Tools for Motor Vehicle Emission Testing |
| Compliance Standards | GB 18285–2018, GB 3847–2018, HJ 1237–2021, Draft JJF (Eco-Env) XXX–202X “Calibration Specification for OBD Diagnostic Tools Used in Motor Vehicle Emission Inspection” |
| Supported Protocols | ISO 14230 (KWP2000), ISO 9141-2, ISO 15765 (CAN), SAE J1850 VPW/PWM, SAE J1939, ISO 27145 (WWH-OBD), ISO 13400 (DoIP) |
| Operating Voltage Simulation | 12 V DC / 24 V DC |
| Data Modes | Auto-random generation & Manual parameter configuration |
| Data Export | CSV/Excel report generation with timestamped audit trail |
| Software Interface | PC-based calibration management software with GLP-compliant data logging |