- All
- Favorite
- Popular
- Most rated
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | SuperSPE 360 |
| Automation Level | Fully Automatic |
| Number of Channels | 6 Independent Channels |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control | 0.1–60 mL/min |
| Solvent Reservoirs | 8 |
| Sample Capacity | 36 Positions |
| Sample Volume Range | 10–20,000 mL |
| Wetted Materials | PTFE |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | AutoVap S96 |
| Heating Method | Dry Block Heating |
| Temperature Range | Ambient to 85 °C |
| Temperature Stability | ±0.1 °C |
| Sample Format | 96-well microplates (standard or deep-well, 8×12 format) |
| Gas Flow Rate | 0–60 L/min (0–99 scfh) |
| Total Sample Capacity | 192 wells (2 plates) |
| Heating Power | 620 W |
| Dimensions | 62.2 × 32 × 27.5 cm |
| Timer Range | 0–999.9 min |
| Brand | ATR |
|---|---|
| Origin | USA |
| Manufacturer Type | Authorized Distributor |
| Origin Category | Imported |
| Model | AutoPro SPE 200 |
| Automation Level | Fully Automated |
| Number of Channels | Dual-Channel (upgradable to 20-channel) |
| Extraction Format | Cartridge-Based SPE |
| Flow Rate Control | 0–60 mL/min |
| Solvent Selection | Up to 8 Pre-Installed Solvents |
| Sample Capacity | 2 Samples Simultaneously |
| Sample Loading Volume | 1–100 mL (extendable to 1000 mL) |
| Wetted Materials | PTFE Only |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | AutoVap S8 |
| Instrument Type | Automated Quantitative Concentrator |
| Temperature Range | Ambient to 99°C |
| Temperature Control Accuracy | ±0.5°C |
| Sample Volume Capacity | 0–50 mL (standard), optional 0–200 mL |
| Endpoint Detection | 0.5 mL or 1.0 mL optical sensing |
| Parallel Channels | 8 independent channels |
| Concentration Speed | 3–5× faster than conventional nitrogen blow-down systems |
| Sample Recovery Rate | ≥90% (typical, matrix-dependent) |
| Endpoint Precision | <5% volume error |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | SLE 350 |
| Cooling Technology | Semiconductor-based Condensation |
| Minimum Operating Temperature | −20 °C |
| Form Factor | Benchtop / Fume Hood Compatible |
| Automation Level | Fully Automatic (One-Touch Operation) |
| Integrated Liquid-Level Detection | Yes |
| Compatibility | Universal Interface for Rotary Evaporators, Nitrogen Blow-Down Concentrators, and Other Solvent-Generating Instruments |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | AutoVap S60 |
| Heating Method | Water Bath |
| Temperature Range | Ambient to 99 °C |
| Temperature Stability | ±0.5 °C |
| Sample Vial Capacity | 1.5 mL to 50 mL |
| Gas Flow Rate | 0–8 L/min |
| Sample Positions | 60 |
| Heating Power | 800 W |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | Super SPE 300 |
| Automation Level | Fully Automated |
| Number of Channels | 6 |
| SPE Format Compatibility | Cartridge and Membrane (25 mm & 47 mm) |
| Flow Rate Control | 0.1–60 mL/min (sample pump) |
| Solvent Reservoirs | 8 independent solvent ports |
| Sample Capacity | Up to 6 large-volume samples simultaneously |
| Sample Loading Volume | 10–20,000 mL |
| Wetted Materials | PTFE only |
| Method Compliance | EPA-approved methods |
| Control Interface | 12-inch touchscreen PC with bilingual (English/Chinese) GUI |
| Waste Segregation | Three dedicated waste lines (aqueous, general organic, chlorine-containing organic) |
| Optional Module | Integrated Automated Quantitative Concentration Unit (vortex-assisted nitrogen blow-down, 0–50 mL input, endpoint at 0.5 or 1.0 mL) |
| Brand | ATR |
|---|---|
| Origin | USA |
| Model | Super SPE300 |
| Automation Level | Fully Automated |
| Number of Channels | 6 |
| Cartridge/Membrane Compatibility | Universal (Columns & Disks) |
| Flow Rate Control | 0.1–60 mL/min |
| Solvent Selection Ports | 8 |
| Sample Capacity | Up to 6 large-volume samples simultaneously |
| Sample Loading Volume | 10–20,000 mL |
| Wetted Materials | PTFE |
| Brand | LeadTech |
|---|---|
| Origin | Canada |
| Model | Tecta-B16 |
| Detection Principle | Enzyme-Substrate Fluorescence-Based Optical Sensing |
| Microbial Targets | Total Coliforms, Fecal Coliforms, Escherichia coli, Enterococci |
| Sample Throughput | 4 or 16 simultaneous assays |
| Detection Range | 1–10⁵ CFU/100 mL (no dilution required) |
| Limit of Detection | 1 CFU/100 mL |
| Incubation Temperature Control | 20–50 °C |
| Detection Time | 4–18 h (time-to-detection dependent on concentration) |
| Data Output | Direct display, Ethernet/Wi-Fi transmission, SMTP email alerts |
| Compliance | US EPA Method 1603 & 1604, GB/T 5750.12–2006, ISO 9308-1:2014, ASTM D6502-22 |
| Regulatory Readiness | FDA 21 CFR Part 11–compliant audit trail (software-enabled), GLP/GMP data integrity architecture |
Show next